Format for dumpfiles generated by EDA logic simulation tools
Value change dump (VCD) (also known less commonly as "variable change dump") is an ASCII-based format for dumpfiles generated by EDAlogic simulation tools. The standard, four-value VCD format was defined along with the Veriloghardware description language by the IEEE Standard 1364-1995 in 1996. An extended VCD format defined six years later in the IEEE standard 1364-2001 supports the logging of signal strength and directionality. The simple and yet compact structure of the VCD format has allowed its use to become ubiquitous and to spread into non-Verilog tools such as the VHDL simulator GHDL and various kernel tracers. A limitation of the format is that it is unable to record the values that are stored in memories.
This section needs expansion. You can help by adding to it. (May 2008)
The VCD file comprises a header section with date, simulator, and timescale information; a variable definition section; and a value change section, in that order. The sections are not explicitly delineated within the file, but are identified by the inclusion of keywords belonging to each respective section.
VCD keywords are marked by a leading $; in general every keyword starts a command which is terminated by an explicit $end. Variable identifiers may also start with a $, but these may be distinguished by context.
All VCD tokens are delineated by whitespace. Data in the VCD file is case sensitive.
Header section
The header section of the VCD file includes a timestamp, a simulator version number, and a timescale, which maps the time increments listed in the value change section to simulation time units.
Variable definition section
The variable definition section of the VCD file contains scope information as well as lists of signals instantiated in a given scope.
Each variable is assigned an arbitrary identifier for use in the value change section. The identifier is composed of one or more printable ASCII characters from! to ~ (decimal 33 to 126), these are conventionally kept short (i.e. one or two characters). Several variables can share an identifier if the simulator determines that they will always have the same value, i.e. are the same wire in the scope of the overall netlist.
The scope type definitions closely follow Verilog concepts, and include the types module, task, function, and fork.
$dumpvars section
The section beginning with $dumpvars keyword contains initial values of all variables dumped.
Value change section
The value change section contains a series of time-ordered value changes for the signals in a given simulation model. The current time is indicated by '#' followed by the timestamp. For scalar (single bit) signal the format is signal value denoted by 0 or 1 followed immediately by the signal identifier with no space between the value and the signal identifier. For vector (multi-bit) signals the format is signal value denoted by letter 'b' or 'B' followed by the value in binary format followed by space and then the signal identifier. Value for real variables is denoted by letter 'r' or 'R' followed by the data using%.16g printf() format followed by space and then the variable identifier.
The id is used later on the value change dump. The value change dump starts after $enddefinitions $end and is based on timestamps. Timestamp is denoted as '#' followed by number. On each timestamp the list of signals that change their value is listed. This is done by the value/id pair:
Scheme is a dialect of the Lisp family of programming languages. Scheme was created during the 1970s at the MIT Computer Science and Artificial Intelligence Laboratory and released by its developers, Guy L. Steele and Gerald Jay Sussman, via a series of memos now known as the Lambda Papers. It was the first dialect of Lisp to choose lexical scope and the first to require implementations to perform tail-call optimization, giving stronger support for functional programming and associated techniques such as recursive algorithms. It was also one of the first programming languages to support first-class continuations. It had a significant influence on the effort that led to the development of Common Lisp.
The VHSIC Hardware Description Language (VHDL) is a hardware description language (HDL) that can model the behavior and structure of digital systems at multiple levels of abstraction, ranging from the system level down to that of logic gates, for design entry, documentation, and verification purposes. Since 1987, VHDL has been standardized by the Institute of Electrical and Electronics Engineers (IEEE) as IEEE Std 1076; the latest version of which is IEEE Std 1076-2019. To model analog and mixed-signal systems, an IEEE-standardized HDL based on VHDL called VHDL-AMS has been developed.
In computer programming, the scope of a name binding is the part of a program where the name binding is valid; that is, where the name can be used to refer to the entity. In other parts of the program, the name may refer to a different entity, or to nothing at all. Scope helps prevent name collisions by allowing the same name to refer to different objects – as long as the names have separate scopes. The scope of a name binding is also known as the visibility of an entity, particularly in older or more technical literature—this is in relation to the referenced entity, not the referencing name.
Verilog, standardized as IEEE 1364, is a hardware description language (HDL) used to model electronic systems. It is most commonly used in the design and verification of digital circuits at the register-transfer level of abstraction. It is also used in the verification of analog circuits and mixed-signal circuits, as well as in the design of genetic circuits. In 2009, the Verilog standard was merged into the SystemVerilog standard, creating IEEE Standard 1800-2009. Since then, Verilog is officially part of the SystemVerilog language. The current version is IEEE standard 1800-2017.
In computer engineering, a hardware description language (HDL) is a specialized computer language used to describe the structure and behavior of electronic circuits, and most commonly, digital logic circuits.
In computer science, a symbol table is a data structure used by a language translator such as a compiler or interpreter, where each identifier, constant, procedure and function in a program's source code is associated with information relating to its declaration or appearance in the source. In other words, the entries of a symbol table store the information related to the entry's corresponding symbol.
The IEEE 1164 standard is a technical standard published by the IEEE in 1993. It describes the definitions of logic values to be used in electronic design automation, for the VHDL hardware description language. It was sponsored by the Design Automation Standards Committee of the Institute of Electrical and Electronics Engineers (IEEE). The standardization effort was based on the donation of the Synopsys MVL-9 type declaration.
Property Specification Language (PSL) is a temporal logic extending linear temporal logic with a range of operators for both ease of expression and enhancement of expressive power. PSL makes an extensive use of regular expressions and syntactic sugaring. It is widely used in the hardware design and verification industry, where formal verification tools and/or logic simulation tools are used to prove or refute that a given PSL formula holds on a given design.
Accellera Systems Initiative (Accellera) is a standards organization that supports a mix of user and vendor standards and open interfaces development in the area of electronic design automation (EDA) and integrated circuit (IC) design and manufacturing. It is less constrained than the Institute of Electrical and Electronics Engineers (IEEE) and is therefore the starting place for many standards. Once mature and adopted by the broader community, the standards are usually transferred to the IEEE.
Standard Parasitic Exchange Format (SPEF) is an IEEE standard for representing parasitic data of wires in a chip in ASCII format. Non-ideal wires have parasitic resistance and capacitance that are captured by SPEF. These wires also have inductance that is not included in SPEF. SPEF is used for delay calculation and ensuring signal integrity of a chip which eventually determines its speed of operation.
SystemVerilog, standardized as IEEE 1800, is a hardware description and hardware verification language used to model, design, simulate, test and implement electronic systems. SystemVerilog is based on Verilog and some extensions, and since 2008, Verilog is now part of the same IEEE standard. It is commonly used in the semiconductor and electronic design industry as an evolution of Verilog.
Verilog-AMS is a derivative of the Verilog hardware description language that includes Analog and Mixed-Signal extensions (AMS) in order to define the behavior of analog and mixed-signal systems. It extends the event-based simulator loops of Verilog/SystemVerilog/VHDL, by a continuous-time simulator, which solves the differential equations in analog-domain. Both domains are coupled: analog events can trigger digital actions and vice versa.
The Verilog Procedural Interface (VPI), originally known as PLI 2.0, is an interface primarily intended for the C programming language. It allows behavioral Verilog code to invoke C functions, and C functions to invoke standard Verilog system tasks. The Verilog Procedural Interface is part of the IEEE 1364 Programming Language Interface standard; the most recent edition of the standard is from 2005. VPI is sometimes also referred to as PLI 2, since it replaces the deprecated Program Language Interface (PLI).
Electronic circuit simulation uses mathematical models to replicate the behavior of an actual electronic device or circuit. Simulation software allows for modeling of circuit operation and is an invaluable analysis tool. Due to its highly accurate modeling capability, many colleges and universities use this type of software for the teaching of electronics technician and electronics engineering programs. Electronics simulation software engages its users by integrating them into the learning experience. These kinds of interactions actively engage learners to analyze, synthesize, organize, and evaluate content and result in learners constructing their own knowledge.
This article describes the syntax of the C# programming language. The features described are compatible with .NET Framework and Mono.
A waveform viewer is a software tool for viewing the signal levels of either a digital or analog circuit design.
MyHDL is a Python-based hardware description language (HDL).
Spectre is a SPICE-class circuit simulator owned and distributed by the software company Cadence Design Systems. It provides the basic SPICE analyses and component models. It also supports the Verilog-A modeling language. Spectre comes in enhanced versions that also support RF simulation (SpectreRF) and mixed-signal simulation.
OptimJ is an extension for Java with language support for writing optimization models and abstractions for bulk data processing. The extensions and the proprietary product implementing the extensions were developed by Ateji which went out of business in September 2011. OptimJ aims at providing a clear and concise algebraic notation for optimization modeling, removing compatibility barriers between optimization modeling and application programming tools, and bringing software engineering techniques such as object-orientation and modern IDE support to optimization experts.
Tcl is a high-level, general-purpose, interpreted, dynamic programming language. It was designed with the goal of being very simple but powerful. Tcl casts everything into the mold of a command, even programming constructs like variable assignment and procedure definition. Tcl supports multiple programming paradigms, including object-oriented, imperative, functional, and procedural styles.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
