American Precision Museum

Last updated

Robbins and Lawrence Armory and Machine Shop
American Precision Museum Windsor Vermont.jpg
The American Precision Museum
USA Vermont location map.svg
Red pog.svg
Usa edcp location map.svg
Red pog.svg
LocationS. Main St., Windsor, Vermont
Coordinates 43°28′29″N72°23′23″W / 43.47472°N 72.38972°W / 43.47472; -72.38972
Area1.75 acres (0.71 ha)
Built1846
NRHP reference No. 66000796 [1]
Significant dates
Added to NRHPNovember 13, 1966
Designated NHLNovember 13, 1966 [2]
Robbins Workshop Windsor Robbins Workshop Windsor2.jpg
Robbins Workshop Windsor
The village and factories of Robbins & Lawrence Armory Title page - Robbins and Lawrence Armory, 196 Main Street, Windsor, Windsor County, VT HAER VT-39 (sheet 1 of 12).tif
The village and factories of Robbins & Lawrence Armory

The American Precision Museum is located in the renovated 1846 Robbins & Lawrence factory on South Main Street in Windsor, Vermont. The building is said to be the first U.S. factory at which precision interchangeable parts were made, giving birth to the precision machine tool industry. In recognition of this history, the building was declared a National Historic Landmark in 1966. [2] [3] In 1987, the building was recognized by the American Society of Mechanical Engineers as an International Heritage Site, [4] and the collection was recognized as an International Heritage Collection. [5] For each of these designations, the armory was considered a site where pivotal events occurred in the history of American industry, as well as a place that lends itself to comprehensive interpretation of that history.

Contents

A "machine tool" is a machine which makes parts to other machines, such as screws or gun stocks. Lathes, milling machines, and drill presses are examples of precision machine tools. The museum has the largest collection of historically significant machine tools in the United States. The museum's holdings include a collection of industrial machinery spanning the first one hundred years of precision manufacturing, along with fine examples of early machined products including rifles, sewing machines, and typewriters. Photographs and archival records provide additional resources for interpreting this critical phase of the Industrial Revolution.

The museum is open daily from 10am until 5pm from May 1 through October. [6]

History of the building

Robbins and Lawrence Armory

Richard S. Lawrence, a brilliant mechanic, moved to Windsor in 1838 at age 21 and started making guns in the Windsor Prison. He joined Nicanor Kendall, who had a gun-making shop, and together started a new company. Four years later businessman Samuel E. Robbins came to Windsor. In 1846, Samuel Robbins, Nicanor Kendall, and Richard Lawrence took the bold step of bidding on a government contract for 10,000 rifles.

Having won the contract, they then constructed a four-story brick building beside Mill Brook. Over the next eight years, the factory was built and machines to make precision parts were made. They brought in workers and mechanics, invented new machines, adapted old ones, and perfected techniques for producing interchangeable parts. Later, Lawrence bought out Kendall. Within a few years, they were exporting not only rifles but also their new metal cutting machines across North America, to England and around the world. The technology for making guns was quickly adapted to making consumer products as well as parts for many other machines

The imposing, four-story structure rises from a stone foundation adjacent to a brook that provided immediate and efficient use of waterpower. Inside, power was distributed throughout each floor with line shafting; the shafts were connected to individual machines by leather belts. Abundant windows and the building's narrow width relative to its length (40’ x 100’), brought daylight into the interior work areas. Outside, the immediate neighborhood is still home to worker housing that was built at various times in the factory's history. The nearby Connecticut River and the active railroad attest to the importance of transportation in the development of the site.

The Armory Building: 1866–1964

North elevation of museum looking southwest, Robbins & Lawrence Armory North elevation of museum looking southwest. - Robbins and Lawrence Armory, 196 Main Street, Windsor, Windsor County, VT HAER VT-39-3.tif
North elevation of museum looking southwest, Robbins & Lawrence Armory

The building operated as a cotton mill beginning in 1866 for nearly two decades, before returning to manufacturing machine tools in 1888. Ten years later the property was sold to the Windsor Electric Light Company, before being sold to the Central Vermont Public Service Company in 1926.

The Museum: 1966 - Present

First floor of museum, west end, looking east at machinery exhibits First floor of museum, west end, looking east at machinery exhibits. - Robbins and Lawrence Armory, 196 Main Street, Windsor, Windsor County, VT HAER VT-39-16.tif
First floor of museum, west end, looking east at machinery exhibits
Second floor of museum, currently used for storage, looking east Second floor of museum, currently used for storage, looking east. - Robbins and Lawrence Armory, 196 Main Street, Windsor, Windsor County, VT HAER VT-39-17.tif
Second floor of museum, currently used for storage, looking east
Third floor of museum, also used for storage, looking east Third floor of museum, also used for storage, looking east. - Robbins and Lawrence Armory, 196 Main Street, Windsor, Windsor County, VT HAER VT-39-18.tif
Third floor of museum, also used for storage, looking east

In 1964, CVPS proposed razing the building, prompting Smithsonian curator and Windsor resident, Edwin A. Battison to formulate plans for the creation of a museum. Battison had a relationship with CVPS, storing various items in the building since the 1950s.

Windsor native Battison founded the American Precision Museum in 1966 and served as its director until 1991. Battison, a  curator of Mechanical Engineering at the National Museum of American History at the Smithsonian Institution, [7] secured the Robbins & Lawrence Armory to house the museum and the collection of historic machine tools, related books, and archival materials he had collected during his lifetime.

The armory building is significant for its architectural integrity, which reflects the size, scale, and operation of a 19th-century factory. A National Historic Landmark, in 2001 it was designated a special project of Save America’s Treasures; in 2003, APM received a Save America’s Treasures award of $200,000 for installing a new slate roof to replace the deteriorated original.

Legacy of Robbins and Lawrence

Early Manufacturing and the “American System”

The first phase of the Industrial Revolution was introduced in America during the late 18th century and was modeled on the English system of textile manufacturing. In 1846, when the Armory was built, the second phase of the Industrial Revolution—the “American System”—was about to be launched. In the remote village of Windsor, entrepreneurs and artisans had already constructed a series of dams that powered sawmills and a gristmill on the Mill Brook, 18 buildings and shops in total. In these small workshops, inventors developed designs for new products as well as making both new and old items more quickly. In Windsor and other towns up and down the Connecticut River Valley (known as the Precision Valley, [8] new industries attracted more people and stimulated the creation of commercial downtowns. Mills, stores, and homes were clustered between the river and the steep hillsides.

Robbins & Lawrence Impact

There are two reasons that Robbins & Lawrence can be considered as founders of the precision tool industry. In 1851, Robbins and Lawrence traveled to London to demonstrate their rifles at the Great Exhibition, held in London's Crystal Palace.  The rifles were made in Windsor using interchangeable parts.  They won a medal and so impressed the British Army that they placed an order for 25,000 rifles [9] for the Crimean War and also ordered 141 of the Robbins & Lawrence metal-working machines making the firm the first large-scale exporter of machine tools. [10]

The second reason Robbins & Lawrence can be credited with the birth of the precision tool industry is the number of people who were employed at the factory that went on to work at, or found, other companies. J.W. Roe produced a "Genealogy of the Robbins & Lawrence Shop" which is reproduced here, with permission, from Lindsay Publications. With the development of interchangeable parts, machines of all sorts could be made in large numbers and sold more cheaply. The manufacture of sewing machines, typewriters, bicycles, engines and cars soon followed.  Precision machine tools which makes standardized parts make the mechanical equipment of our modern world.

Windsor, Vermont and Precision Manufacturing

Windsor, Vermont played an important role in the development of precision manufacturing and the machine tool industry in America. The Robbins & Lawrence armory served as a breeding ground for innovation in the mid-19th century and as a center for excellence in the high tech industry of its day. Military leaders and industrialists traveled to Windsor to learn about the new “American System” of manufacturing, and workers from Windsor were aggressively recruited by other emerging industries. By continually increasing productivity, the machine tool industry spread the notion that material abundance was possible for a broad cross section of the American people. At its full maturity in the mid 20th century, the machine tool industry provided the backbone of American industrial strength and helped the United States develop into a world power.

Genealogy of Robbins & Lawrence Genealogy of the Robbins & Lawrence Shop.jpg
Genealogy of Robbins & Lawrence

Past exhibits

The armory complex in Windsor during the Civil War, of Lamson, Goodnow & Yale The armory complex in Windsor around the time of the Civil War, of Lamson, Goodnow & Yale.jpg
The armory complex in Windsor during the Civil War, of Lamson, Goodnow & Yale
Lamson, Goodnow & Yale, Springfield Model 1861, built in 1864, special model during the American Civil War Lamson, Goodnow & Yale, Springfield model of 1864, side view.jpg
Lamson, Goodnow & Yale, Springfield Model 1861, built in 1864, special model during the American Civil War
L.G & Y., Springfield Model 1861, built in 1864 toward the end of the war Lamson, Goodnow & Yale, Springfield model of 1864.jpg
L.G & Y., Springfield Model 1861, built in 1864 toward the end of the war

Current Exhibits

North elevation of museum looking southwest., waterfalls for waterpower North elevation of museum looking southwest. - Robbins and Lawrence Armory, 196 Main Street, Windsor, Windsor County, VT HAER VT-39-4.tif
North elevation of museum looking southwest., waterfalls for waterpower

2008 - Present: Working Machine Shop (known as the Innovation Station)

2015 - Present: Tool Revolution

2016 - Present: Shaping America: Machines and Machinists at Work

This 4,000 square-foot exhibition focuses on the people whose work made great societal changes possible and the rise of the “American System” of manufacturing. “Shaping America” is the first comprehensive exhibition to examine Vermont's industrial history in-depth and explores the broad themes of innovation and problem solving, craftsmanship, and the influence of precision manufacturing upon American history and culture. Precision manufacturing reinforced the growth of the American middle class and laid the foundation for the consumer culture that developed during the 19th and 20th centuries. The program was supported by the National Endowment for the Humanities.

2017 - Present: Learning Lab

See also

Related Research Articles

<span class="mw-page-title-main">Eli Whitney</span> American inventor (1765–1825)

Eli Whitney Jr. was an American inventor, widely known for inventing the cotton gin in 1793, one of the key inventions of the Industrial Revolution that shaped the economy of the Antebellum South.

<span class="mw-page-title-main">Windsor, Vermont</span> Town in Vermont, United States

Windsor is a town in Windsor County, Vermont, United States. As the "Birthplace of Vermont", the town is where the Constitution of Vermont was adopted in 1777, thus marking the founding of the Vermont Republic, a sovereign state until 1791, when Vermont joined the United States. Over much of its history, Windsor was home to a variety of manufacturing enterprises. Its population was 3,559 at the 2020 census.

The American system of manufacturing was a set of manufacturing methods that evolved in the 19th century. The two notable features were the extensive use of interchangeable parts and mechanization for production, which resulted in more efficient use of labor compared to hand methods. The system was also known as armory practice because it was first fully developed in armories, namely, the United States Armories at Springfield in Massachusetts and Harpers Ferry in Virginia, inside contractors to supply the United States Armed Forces, and various private armories. The name "American system" came not from any aspect of the system that is unique to the American national character, but simply from the fact that for a time in the 19th century it was strongly associated with the American companies who first successfully implemented it, and how their methods contrasted with those of British and continental European companies. In the 1850s, the "American system" was contrasted to the British factory system which had evolved over the previous century. Within a few decades, manufacturing technology had evolved further, and the ideas behind the "American" system were in use worldwide. Therefore, in manufacturing today, which is global in the scope of its methods, there is no longer any such distinction.

<span class="mw-page-title-main">Springfield Armory</span> National Historic Site of the United States

The Springfield Armory, more formally known as the United States Armory and Arsenal at Springfield located in the city of Springfield, Massachusetts, was the primary center for the manufacture of United States military firearms from 1777 until its closing in 1968. It was the first federal armory and one of the first factories in the United States dedicated to the manufacture of weapons. The site is preserved as the Springfield Armory National Historic Site, Western Massachusetts' only unit of the national park system. It features the world's largest collection of historic American firearms.

<span class="mw-page-title-main">Kalashnikov Concern</span> Weapons and motor vehicle manufacturer

JSC Kalashnikov Concern, known until 2013 as the Izhevsk Machine-Building Plant, is a Russian defense manufacturing concern and joint-stock company headquartered in the city of Izhevsk in the Republic of Udmurtia as well as the capital city of Moscow. The concern designs and produces a wide range of civilian and military weapons including assault rifles, sniper rifles, designated marksman rifles, machine guns, squad automatic weapons, hunting rifles, shotguns, guided artillery projectiles, and a wide range of other precision weapons including remote controlled weapon stations, unmanned vehicles and military robots.

<span class="mw-page-title-main">Interchangeable parts</span> Components that are identical for practical purposes

Interchangeable parts are parts that are identical for practical purposes. They are made to specifications that ensure that they are so nearly identical that they will fit into any assembly of the same type. One such part can freely replace another, without any custom fitting, such as filing. This interchangeability allows easy assembly of new devices, and easier repair of existing devices, while minimizing both the time and skill required of the person doing the assembly or repair.

Elisha King Root was a Connecticut machinist, inventor, and President of Colt's Manufacturing Company.

<span class="mw-page-title-main">Charles E. Billings</span> American mechanical engineer, inventor, superintendent, and businessman, 1834-1920

Charles Ethan Billings (1834–1920) was an American mechanical engineer, inventor, superintendent, and businessman. He held various U.S. patents on hand tools, either assigned or licensed to the firm that he and Christopher M. Spencer cofounded, the Billings & Spencer Company. His name as patent holder is stamped on countless forged hand tools, many of which survive. Billings was an expert in drop forging and was an influential leader in the American system of manufacturing and its successor systems of mass production for firearms, sewing machines, hand tools, bicycles, and other goods. He served as president of the American Society of Mechanical Engineers in 1895 and 1896. The Billings & Spencer Company was both a machine tool builder and a manufacturer of hand tools made with its machine tools.

<span class="mw-page-title-main">Eli Whitney Museum</span> Museum in Hamden, Connecticut, USA

The Eli Whitney Museum, in Hamden, Connecticut, is an experimental learning workshop for students, teachers, and families. The museum's main building is located on a portion of the Eli Whitney Gun Factory site, a gun factory erected by Eli Whitney in 1798. The museum focuses on teaching experiments that are the roots of design and invention, featuring hands-on building projects and exhibits on Whitney and A. C. Gilbert.

<span class="mw-page-title-main">Machine shop</span> Room, building or company where machining is done

A machine shop or engineering workshop is a room, building, or company where machining, a form of subtractive manufacturing, is done. In a machine shop, machinists use machine tools and cutting tools to make parts, usually of metal or plastic. A machine shop can be a small business or a portion of a factory, whether a toolroom or a production area for manufacturing. The building construction and the layout of the place and equipment vary, and are specific to the shop; for instance, the flooring in one shop may be concrete, or even compacted dirt, and another shop may have asphalt floors. A shop may be air-conditioned or not; but in other shops it may be necessary to maintain a controlled climate. Each shop has its own tools and machinery which differ from other shops in quantity, capability and focus of expertise.

<span class="mw-page-title-main">Turret lathe</span> Metalworking lathe

A turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable. It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between or to control the toolpath. The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion, via the mechanical limits placed on it by the turret's slide and stops, or via digitally-directed servomechanisms for computer numerical control lathes.

<span class="mw-page-title-main">James Hartness</span> American engineer and Vermont politician (1861–1934)

James Hartness was an American business executive, inventor, mechanical engineer, entrepreneur, amateur astronomer, and politician who served as the 58th governor of Vermont from 1921 to 1923.

Bryant is a brand of machine tools headquartered in Springfield, Vermont. Acquired by Fives in 2015, the Bryant product line specializes in the grinding field, building grinding machines with computer numerical control (CNC).

<span class="mw-page-title-main">Linus Yale Sr.</span> American manufacturer of locks (1797–1858)

Linus Yale was an American inventor, manufacturer of bank locks, and 1st Mayor of Newport, New York. His patents were signed by President Andrew Jackson. His son, Linus Yale Jr., would later found the Premier manufacturer of locks in the United States, and be a pioneer in the American lock industry through the Yale Lock Company.

The history of Connecticut Industry is a major part of the history of Connecticut. Between the birth of the U.S. patent system in 1790 and 1930, Connecticut had more patents issued per capita than any other state; in the 19th century, when the U.S. as a whole was issued one patent per three thousand population, Connecticut inventors were issued one patent for every 700–1000 residents. Connecticut's first recorded invention was a lapidary machine, by Abel Buell of Killingworth, in 1765.

<span class="mw-page-title-main">Harpers Ferry Armory</span> Former United States federal armory

The Harpers Ferry Armory, more formally known as the United States Armory and Arsenal at Harpers Ferry, was the second federal armory created by the United States government; the first was the Springfield Armory. It was located in Harpers Ferry, Virginia, which since 1863 has been part of West Virginia. It was both an arsenal, manufacturing firearms, and an armory, a storehouse for firearms. Along with the Springfield Armory, it was instrumental in the development of machining techniques to make interchangeable parts of precisely the same dimensions.

<span class="mw-page-title-main">Richmond rifle</span> Rifled musket

The Richmond rifle was a rifled musket produced by the Richmond Armory in Richmond, Virginia, for use by the Confederate States Army during the American Civil War.

<span class="mw-page-title-main">Machine factory</span> Type of company

A machine factory is a company, that produces machines. These companies traditionally belong to the heavy industry sector in comparison to a more consumer oriented and less capital intensive light industry. Today many companies make more sophisticated smaller machines, and they belong to the light industry. The economic sector of machine factories is called the machine industry.

<span class="mw-page-title-main">49th New York Infantry Regiment</span> Military unit

The 49th New York Infantry Regiment was an infantry regiment in the Union Army during the American Civil War.

<span class="mw-page-title-main">38th New York Infantry Regiment</span> Military unit

The 38th New York Infantry Regiment was a two-year infantry regiment in the U.S. Army during the American Civil War.

References

Notes

  1. From Graf, "The U.S. Special Model 1861 Contract Rifle-Musket differed considerably from the regulation U.S. Model 1861 Rifle-Musket. In fact, very few parts interchange, with the exception of a few screws, the fore-tip, side screw ferrules and trigger assembly. The motivation behind the production of this weapon seems to be the availability of Enfield rifle-musket-making machinery in Hartford, Conn., and Windsor, Vermont. Sitting unused since the bankruptcy of Robbins & Lawrence following the cancellation of their British arms contracts, Colt eyed the machinery as an economical and expedient measure to meeting the Government’s demands for weapons."
    LG & Y worked with Samuel Colt to fill the contracts order.

Citations

  1. "National Register Information System". National Register of Historic Places . National Park Service. April 15, 2008.
  2. 1 2 NPS R & L Armory and Machine Shop.
  3. NPS RHP Nomination:R & L Armory and Machine Shop,
    Accompanying 5 photos, from 1966, 1974, and 1979  (32 KB)
  4. ASME Robbins & LawrenceMachine Shop.
  5. ASME American Precision Museum.
  6. American Precision Museum.
  7. Smithsonian, Edwin A. Battison.
  8. Broehl (1959), p. 1-4.
  9. Roe (1916), p. 191.
  10. Roe (1916), p. 192.
  11. Smithsonian, Doodles, Drafts & Designs.
  12. Moller (2011), p. 314-315.
  13. Brown (2011), p. 141-161.
  14. Graf (2008), p. 118, 121.
  15. Roe (1916), p. 189-193.

Sources