Honda Dylan 125

Last updated
Honda Dylan
2017-09-28 (238) Honda Dylan at Bahnhof Krems an der Donau, Austria.jpg
Manufacturer Honda
Also calledHonda SES 125
Honda SES 150
Production2002-2006
Assembly Atessa, Italy
Successor Honda PS
Ignition type Electric start
Transmission Honda V-Matic belt-converter automatic
Suspension Front: telescopic
Rear: swingarm
Brakes Front: disc
Rear: drum
Tires Front: 110/90-13
Rear: 130/70-13
Wheelbase 1,330 mm (52 in)
DimensionsL: 1,940 mm (76 in)
W: 700 mm (28 in)
H: 1,170 mm (46 in)
Seat height795 mm (31.3 in)
Related Honda @

The Honda Dylan is a motor scooter manufactured by Honda from 2002 to 2006.

Specification

Presented at the Bologna Motor Show in December 2001, the Dylan goes into production at the Honda Italia plant in Atessa the following January; is positioned within the manufacturer's range of scooters between the Honda @ and the SH. In 2006 it was replaced by the Honda PS.

The Dylan uses the same chassis of the european Honda @ and was available with two single-cylinder four-stroke engines, one of 125 and the other of 150 cm³. Engine power was transferred to the rear wheel through a centrifugal clutch equipped with a continuously variable V-belt drive. In addition, the scooter was equipped with a mixed disc-drum braking system, equipped with the CBS (Combined Brake System).

Related Research Articles

<span class="mw-page-title-main">Modenas</span>

Syarikat Motosikal dan Enjin Nasional Sdn. Bhd, or known as Modenas for short is a Malaysian national motorcycle company producing various small motorcycle models below 400cc targeted for local market and export. The company's headquarters and factory are located at the small town of Gurun, Kedah, Malaysia.

<span class="mw-page-title-main">Malaguti</span> Italian motorcycle manufacturer

Malaguti is an Italian bicycle, scooter and motorcycle company based in San Lazzaro di Savena, founded by Antonino Malaguti in 1930. Producing bicycles until 1958, they then entered the motorcycle market. Noted for their use of small engines in their bikes. In October 2011, Malaguti laid off its remaining employees in Bologna, Italy as the company eventually folded.

The Honda CR series is a range of off-road motorcycles made by the Honda corporation from 1973 onwards.

<span class="mw-page-title-main">Honda Pantheon</span> Type of motorcycle

The Honda Pantheon is a scooter, manufactured by Honda in the Italian factories of Honda Italia Industriale S.p.A in Atessa.

<span class="mw-page-title-main">Types of motorcycles</span> Types of motorcycles

The six main types of motorcycles are generally recognized as standard, cruiser, touring, sports, off-road, and dual-purpose. Sport touring is sometimes recognized as a seventh category or integrated with the touring category.

<span class="mw-page-title-main">Honda CG125</span> Honda motorcycle

The Honda CG125 or Honda CG is a commuter motorcycle made by Honda of Japan. It was in production from 1976 to 2008 in Japan and has been in production since 1992 in Pakistan. The CG was originally manufactured in Japan, but the source for the European market was eventually moved to Brazil in 1985, and to Pakistan and Turkey in 1992 for the W and M models. The CG125 is powered by a 124 cc (7.6 cu in) four-stroke, overhead valve, single-cylinder engine that has changed little over the years.

Mild hybrids are generally cars with an internal combustion engine (ICE) equipped with an electric combined motor/generator in a parallel hybrid configuration allowing the engine to be turned off whenever the car is coasting, braking, or stopped, and then quickly restarted once power is again required. Mild hybrids may employ regenerative braking and some level of power assist to the internal combustion engine, but mild hybrids do not have an electric-only mode of propulsion.

<span class="mw-page-title-main">Honda Capa</span> Motor vehicle

The Honda Capa, short for "capacity", is a tall wagon produced by Honda between 1998 and 2002 for the Japanese market. It was introduced at the 1997 Tokyo Motor Show as the concept car "J-MW." It went on sale on April 24, 1998, with Honda series codes GA4 and GA6. On September 16, 1999 a four-wheel drive version of the Capa was released, using Honda's Full-Time 4wd system. Brake Assist was offered as standard equipment. Due to disappointing sales the Capa nameplate was discontinued in 2002. It was available in Japan through the Honda Primo and Honda Verno dealerships.

The GY6 engine design is a four-stroke single-cylinder in a near horizontal orientation that is used on a number of small motorcycles or scooters made in Taiwan, China, and other southeast Asian countries. It has since become a generic technology. Kymco went on to produce Honda clones such as the Pulsar (CB125), made to Honda standards, as part of their range.

<span class="mw-page-title-main">Honda Big Ruckus</span> Honda motorcycle

The Big RuckusPS250 is a 250cc, CVT transmission-equipped two-seater scooter, manufactured by Honda; marketed in Japan for model years 2004-2007 and in North America for model years 2005-2006 — and noted for its minimal bodywork and expressed light-weight steel tubular frame, akin to the Honda Zoomer.

<span class="mw-page-title-main">Yamaha Vino 125</span> Scooter

The Yamaha Vino 125 is a scooter introduced by Yamaha Motor Company in 2004 as a larger brother to the 49 cc (3.0 cu in) Yamaha Vino/Vino Classic, replacing the Yamaha Riva 125 (XC125) scooter. Little has changed since the 2004 introduction of the Vino 125 with the exception of color choices. Because of the engine size and top speed, in many US States, the Vino 125 requires a motorcycle license to legally operate. The Vino 125 has a relatively low seat height, making it popular among smaller riders. The motorcycle was sold until 2009 in the United States

<span class="mw-page-title-main">Honda PC50</span> Type of motorcycle

The Honda PC50 is a moped produced by the Honda Motor Company in Japan from May 1969 until February 1977. The PC50, though much smaller and lighter, had some similar features to Honda's popular C50 /70 /90 Super Cub line, with a step-through pressed-steel frame, a fuel tank under the saddle, a chain cover, and optionally equipped with leg shields,

The Honda Elite is a series of scooters manufactured by Honda since 1983. Honda currently makes the 108 cc (6.6 cu in) 2010 Elite.

<span class="mw-page-title-main">Honda Civic (eighth generation)</span> Motor vehicle

The eighth-generation Honda Civic is a range of compact cars (C-segment) manufactured by Honda between 2005 and 2012, replacing the seventh-generation Civic. Four body styles were introduced throughout its production run, which are sedan, coupe, and both three-door and five-door hatchback. The sedan version was introduced with two distinct styling for different markets, with one of them sold as the Acura CSX in Canada and as the Ciimo 1.8 in China from 2012 until 2016. The hatchback versions formed the European-market Civic range, which received a different architecture, body design and smaller footprint, and solely produced in Swindon, United Kingdom.

<span class="mw-page-title-main">Piaggio Vespa LX</span> Type of motorcycle

The Vespa LX is a scooter that was made by Piaggio from 2006 until 2014.

<span class="mw-page-title-main">Combined braking system</span>

A combined braking system (CBS), also called linked braking system (LBS), is a system for linking front and rear brakes on a motorcycle or scooter. In this system, the rider's action of depressing one of the brake levers applies both front and rear brakes. The amount of each brake applied may be determined by a proportional control valve. This is distinct from (conventional) integrated brakes, where applying pressure to the rear brake pedal only applies some braking force to the front brake.

<span class="mw-page-title-main">Honda NC700D Integra</span> Type of motorcycle

The Honda NC700D/NC750D Integra is a motorcycle/scooter hybrid made by Honda since 2012. Known internally as the RC62, the Integra was originally unveiled as the New Mid Concept in 2010, before being presented in production form at EICMA 2011 in Milan. The Integra shares a platform with two motorcycle variants, the NC700S (RC61) and the NC700X (RC63). All three variants are powered by a 670 cc engine derived from the unit used in the Honda Fit automobile. The Integra will be available with two different power outputs, one version develops a peak power output of 38.1 kW (51.1 hp) at 6,250 rpm and 62 N⋅m (46 lb⋅ft) of torque at 4,750 rpm, while the other has a lower output of 35 kW (47 hp) and 60 N⋅m (44 lb⋅ft) to meet 2013 A2 European licensing regulations.

<span class="mw-page-title-main">Honda PCX</span> Scooter model manufactured by Honda

The Honda PCX is a scooter made by the Japanese manufacturer Honda, it was first introduced for sale in November 2009. Production began in September 2009 at A.P. Honda Co., Ltd. in Bangkok, Thailand.

<span class="mw-page-title-main">Honda NC700 series</span> Type of motorcycle

The Honda NC700 series is a family of motorcycles produced by Honda since 2012. NC700 series was a 'new concept', being unlike conventional motorcycles, a bike designed for commuters, new or veteran riders. The series also includes the motorcycle/scooter hybrid NC700D Integra. The NC700 series is classed as a commuter model bike which has incorporated design and mechanical elements from various motorcycle types. The riding position is similar to standard bike styles. There is a helmet-sized internal storage in place of the traditional fuel tank, which in turn is located under the seat. The series is often marketed as fun to ride, easy to handle and very fuel efficient.

The Honda Vision is a scooter made by Honda that was introduced in 1985. Variants include the Honda NSC50 (EU) and Honda NSC110 (Worldwide). All versions of the Vision are powered by an air-cooled 49 or 108 cc four-stroke engine coupled to an automatic transmission. They are equipped with 14-inch wheels and Honda's Combined Braking System (CBS).