Nelson-class battleship

Last updated

The Royal Navy in the Interwar Period Q70606.jpg
Aerial view of Nelson before 1939
Class overview
NameNelson class
OperatorsNaval Ensign of the United Kingdom.svg  Royal Navy
Preceded by
Succeeded by King George V class
Cost £7,504,055–7,617,799
Built1922–1927
In service1927–1947
Completed2
Scrapped2
General characteristics (Nelson as built)
Type Battleship
Displacement
Length709 ft 10 in (216.4 m) o/a
Beam106 ft (32.3 m)
Draught30 ft 4 in (9.2 m) (mean standard)
Installed power
Propulsion2 shafts; 2 geared steam turbines
Speed23 knots (43 km/h; 26 mph)
Range7,000  nmi (13,000 km; 8,100 mi) at 16 knots (30 km/h; 18 mph)
Complement
Armament
Armour

The Nelson class was a class of two battleships (Nelson and Rodney) of the British Royal Navy, built shortly after, and under the terms of, the Washington Naval Treaty of 1922. They were the only British battleships built between the Revenge class (ordered in 1913) and the King George V class, ordered in 1936.

Contents

The ships were named after famous British admirals: George Brydges Rodney, 1st Baron Rodney, victor of the Battle of Cape St. Vincent and the Battle of the Saintes, and Horatio Nelson, 1st Viscount Nelson, who won the Battles of the Nile and Trafalgar.

To comply with the limitations of the Washington Treaty, these ships were of an unusual design with many novel features. They are often referred to as the first treaty battleships. The Nelsons were unique in British battleship construction, being the only ships to carry a main armament of nine 16-inch (406 mm) guns. The most unusual feature however, and one that is immediately noticeable, is that these were all carried forward of the bridge.

Commissioned in 1927–29, the Nelsons served extensively in the Atlantic, Mediterranean, and Indian oceans during World War II. Rodney was made famous by her role in the sinking of the German battleship Bismarck in May 1941. At the climax of the battle Rodney, in conjunction with King George V, closed on Bismarck to bombard her at short range. Rodney's main guns were credited with an estimated 100 to 130 hits, contributing greatly to Bismarck's final destruction.

Nelson and Rodney participated in the bombardment of targets in northern France during and after D-Day. In particular, during the Caen campaign Nelson was credited with destroying a group of five Tiger tanks which ventured into a red zone [within 40 km (25 mi) of the coast] deemed by the German command to be in range of Allied battleships.[ citation needed ]

Both ships of the class survived the war, but were scrapped in 1948–1949 along with all other British battleships except the four remaining King George V-class battleships and Vanguard.

Background and design

The Battle of Jutland had shown the value of firepower and protection over speed and manoeuvrability. [1] [ page needed ]

The next generation of British warships incorporated this lesson. After the First World War, the Admiralty drew up plans for massive, heavily armoured battlecruisers and battleships, far larger and stronger than all previous vessels. The G3-class battlecruisers would carry 16-inch (406 mm) guns, and the proposed N3-class battleships would carry nine 18-inch (457 mm) guns, and would be the most powerful vessels afloat. The Royal Navy was planning to hold its superiority in the burgeoning arms race, despite the large warships planned in Japan and the United States. [2] [ page needed ]

Development was abruptly curtailed by the Washington Naval Treaty of 1922, which brought the arms race to a halt. The four battlecruisers that had been ordered were cancelled. Some of the material acquired would later be used in Nelson and Rodney. The Treaty limited all nations' battleships to maximum limits of 35,000 tons and 16-inch guns. The British had successfully ensured that the definition of maximum displacement – the standard displacement – excluded both fuel and boiler feed water. They had argued that having to protect the widespread British Empire meant their ships had to carry more of both and they should not be penalised compared to nations, such as Japan, France and Italy, that operated normally much closer to their home bases. As a result, water-filled internal anti-torpedo bulges could be incorporated, which did not contribute to the "dry" (standard) weights and therefore did not exceed the treaty displacement limits. [2] [ page needed ]

The limits of the treaty inevitably led to compromises in the design of two new ships, and the resulting Nelson class sacrificed installed power (and hence speed) in order that the ships be well-armed and defended. They were often referred to as the "Cherry Tree" class, because they had been "cut down by Washington". [2] The need to limit displacement resulted in a radical new warship design, drawn from the "G3" and "N3" designs of Eustace Tennyson-d'Eyncourt, Director of Naval Construction from 1912 to 1924. To reduce the weight of armour, the main gun turrets were all mounted forward to shorten the armoured citadel. The "G3" and "N3" had two turrets forward of the bridge with the third between the bridge and the funnels/aft superstructure. However, in the Nelsons, this was taken further and all three were in front of the bridge; "B" mount superfiring over "A", with "X" turret on the forecastle deck behind "B", and therefore unable to fire directly forward or aft. "X" turret is sometimes referred to as "C" turret and one alternative design, designated "O3", had it superfiring over both "A" and "B" turrets. [3] [ page needed ] The secondary guns were placed in totally enclosed director-controlled twin turrets at the upper deck level and were grouped aft – another innovative element taken from the G3 and N3 design. [2] [4] [ page needed ]

The machinery was of necessity limited in weight, size and installed power, and there were only two shafts with quite large screws. All previous British battleships after HMS Dreadnought of 1906 had four screws as did all British battleship classes after Nelson. In order that fuel gasses be kept clear of the superstructure, the boiler rooms were moved behind the engine rooms, exhausting into a single funnel. This orientation also reduced the overall length of the armoured citadel. As a countermeasure to the limited power, the hull was of a very efficient hydrodynamic form, to attain the best possible speed. [4] [ page needed ]

Description

The Nelsons had a length between perpendiculars of 660 feet (201.2 m) and an overall length of 709 feet 10 inches (216.4 m) (Nelson) or 710 feet 3 inches (216.5 m) (Rodney), a beam of 106 feet (32.3 m), and a draught of 30 feet 4 inches (9.2 m) at mean standard load. They displaced 33,300–33,730 long tons (33,830–34,270 t) at standard load and 37,430–37,780 long tons (38,030–38,390 t) at deep load. Their crew numbered 1,361 officers and ratings when serving as flagships and 1,314 as private ships. At deep load, they had a metacentric height of 10.2 feet (3.1 m), [5] which gave them a quick roll between 11.2 and 13.6 seconds. [6] In calm weather, the Nelson-class ships were very manoeuvrable, but the large surface area of the superstructure gave them a large amount of weather helm and they could be a handful in confined spaces with a strong wind as was demonstrated when Nelson ran aground off Southsea beach in 1934. [7]

The ships were powered by two sets of Brown-Curtis geared steam turbines, each driving one shaft, using steam from eight Admiralty 3-drum boilers fitted with superheaters that operated at a pressure of 250  psi (1,724  kPa ; 17  atm ). The turbines were rated at 45,000 shaft horsepower (34,000  kW ) and intended to give the ship a maximum speed of 23 knots (43 km/h; 26 mph). The sister ships exceeded their designed speed during their sea trials in 1927, reaching speeds of 23.6–23.8 knots (43.7–44.1 km/h; 27.2–27.4 mph) from 45,614–46,031 shp (34,014–34,325 kW). They carried 3,770–3,805 long tons (3,830–3,866 t) of fuel oil to give them a designed range of 7,000 nautical miles (13,000 km; 8,100 mi) at a cruising speed of 16 knots (30 km/h; 18 mph). [8]

Armour

Armour weight was also reduced by using an internal, inclined armour belt sloped outward at 18 degrees from the vertical. The armour belt was 14 in (360 mm) thick over the main magazines and control positions to 13 in (330 mm) over the machinery and 6-inch gun magazines. The slope increased the relative thickness of the belt to a plunging projectile. Water-filled compartments, surrounded by air-filled ones, formed internal torpedo bulges which were fitted between the armour and the external hull of the ship, which was not armoured. The outer hull plating was meant to initiate detonation of shells which would then explode outside the armour. This innovation dispensed with external torpedo bulges which would otherwise have reduced the speed of the ships due to drag. Underwater protection for the Nelsons was provided by a double bottom 5 feet (1.5 m) deep and a layered defence of an empty outer watertight compartment and an inner water-filled compartment. The torpedo defence system had a total depth of 12 feet (3.7 m) and was backed by a torpedo bulkhead 1.5 inches thick. The system was similar in design and effectiveness to that of Hood , and was rated to withstand an explosion of 750 lbs (340 kg) TNT. [9] The armour scheme was of the "all or nothing" principle; areas were either well protected, from the front of "A" barbette rearwards to the after 6-inch turrets, or were not protected at all, disposing of the multiple intermediate thickness of armour seen in older designs. For the first time a British battleship had a single, 6.25 in (159 mm) thick armoured deck to protect against plunging shells and aircraft-launched bombs, with 3.75 in (95 mm) armour over the machinery spaces and 4.25 in (108 mm) armour on the lower deck over the stern, both on top of the 0.5 in (12.7 mm) deck plating. The main turrets had 16 in (410 mm) Non-cemented (NC) armour on the faces, 11 in (280 mm) on the sides, 7.25 in (184 mm) on the roof and 9 in (230 mm) on the rear with 15 in (380 mm) around the barbettes. The secondary turrets, however, had only 1 in (25 mm) NC all round over 0.5 in (12.7 mm) structural steel plates. [3] [4] [ page needed ]

Superstructure

The large superstructure which was octagonal in plan, was known to its crew as the "Octopoidal" [10] [ page needed ] and was sometimes referred to as "Queen Anne's Mansions" [3] due to its similarity to a 14-storey brick residential development opposite St James's Park tube station in London. The superstructure provided spacious, weatherproof working spaces for the navigating officers and any flag officers embarked. This innovative bridge design was subsequently copied by the French in the Dunkerque-class battleships, as was the all-forward main armament orientation, both features which were repeated in the Richelieu-class designs. [11] [ page needed ] Except for the emergency conning tower at its base, and the trunking for the main gun directors mounted on top, the superstructure was lightly armoured against splinters only, to save weight. Additional weight-saving design measures included the use of light materials such as aluminium for fittings, and fir instead of teak for deck planking, although subsequently, teak decks were fitted in the late 1920s, following concerns that the ships could not fire a full broadside without causing structural damage to the decks. [3] [ page needed ]

The Nelson class was a revolutionary but compromised design, and unsurprisingly there were shortcomings. The location of the superstructure towards the stern caused manoeuvrability problems in high winds, especially when steaming at low speeds, where the superstructure acted somewhat like a mizzen sail permanently set, causing the ships to "weathervane" but according to Captain Hugh Binney, who commanded Nelson in the late twenties, "if this is kept in mind, no real difficulties should be encountered in any circumstances". [3] [ page needed ] This was potentially a problem in crowded harbours, and made the ships somewhat difficult to dock and embark although this issue never led to a major incident. Binney also stated "In the early stages of the ship's first commission, there was a general misconception that the Nelson class were unhandy and difficult to manoeuvre. Both my predecessor and myself, however, very soon discovered that this opinion was entirely fallacious! In calm weather, the ship's manoeuvring capabilities are in no way inferior, and in many ways superior to those of Queen Elizabeth or Revenge." [3] They could also be awkward to manoeuvre when moving astern. This was attributed to the ships having a single, central rudder which was out of the propeller race of the twin screws. At sea, however, they were reported to handle well, with a comparatively small Tactical Diameter (turning circle) particularly when turning into the wind, according to Lt. Commander (later Rear Admiral) Galfry Gatacre RAN, who served in 1941–1942 as the Navigator for both Nelson and subsequently Rodney. He reported no difficulty in navigating either ship through the boom gates at Scapa Flow. Nelson and Rodney were the only battleships never to have bumped the boom gate vessel as they passed through Hoxa Sound. [12] [ page needed ]

Armament

Nelson fires a salvo during gunnery trials in 1942 HMS Nelson during gunnery trials.jpg
Nelson fires a salvo during gunnery trials in 1942

Their main armament of nine 16-inch (406 mm) guns were mounted in triple turrets, the only RN battleships designed in this manner. The guns themselves deviated from standard British designs. Where previous RN weapons fired heavy shells at a moderate velocity, the Nelson's weapons followed the German practice of a lighter shell at a higher velocity. This change in Director of Naval Ordnance policy was due to British testing of surrendered German equipment after World War I, although much later, subsequent testing proved contradictory. Two different rifling rates were tried, and for some time there was a mixture of barrel types in different turrets, even sometimes within the same turret. The guns suffered considerable barrel wear and had a fairly large dispersion pattern, due mainly to the different riflings that each barrel had as they were refurbished over their lifespan. To compensate for barrel wear, muzzle velocities were reduced and a heavier (longer) shell was tried to offset this; but the cost of producing new shells, modifying shell handling and storage equipment came at a time when RN funding had been heavily reduced. Nevertheless, these weapons were not generally considered by the RN to be as successful as the previous BL 15 inch Mark I; the BL 14-inch Mark VII, fitted to the subsequent King George V-class battleships, returned to a heavier (relatively) shell and lower velocity, but its performance was compromised by an over-complex mounting that proved to have reliability defects in combat. The need to reduce displacement led to the use of triple mount turrets, which had early problems with the ammunition handling and loading machinery. The heavier weight of the triple in comparison to a twin turret meant increased stresses on the roller bearings when training the turrets. This was solved by the incorporation of spring-loaded vertical as well as conventional horizontal roller bearings. The triple mount turret proved itself when, in October 1929, a turret crew with two years' experience loaded and fired 33 consecutive rounds without mishap. [3] The incorporation of many safety features, achieved with lighter materials, meant that the complex and relatively fragile equipment had to be serviced regularly over the ships' lifetime. These ships were fitted with the HACS AA fire control system and the Admiralty Fire Control Table Mk I for surface fire control of the main armament.

Firing trials revealed that the blast of 'A' and 'B' turrets on forward bearings caused damage to many weather-deck fittings and conditions on the mess-decks became very uncomfortable. There was a longstanding rumour that the ships could not fire a full broadside without risk of structural damage.[3][ citation needed ] This was disproved during the action against the German battleship Bismarck, where Rodney fired upwards of 40 broadsides (380 shells) without major structural damage except to deck planking and upper deck fittings,[11][ citation needed ] although damage to sickbay fittings, partition bulkheads, toilet bowls and plumbing in the forecastle was extensive. Virtually every light bulb in the forward section was shattered also.[9][ citation needed ]

When 'X' turret was fired 30 degrees abaft the beam and elevation of 40 degrees, considerable damage occurred to the two vertically stacked rows of bridge windows. [13] As a result, the guns of "X" turret were usually prohibited from firing abaft of the beam at high elevations during peacetime practice firing. Fitting tempered glass in the bridge windows was tried, but gun blast still shattered some of them and filled the bridge with flying debris. The design of the Captain's bridge was altered on Nelson circa 1930-33 to reduce the window area and enclose the upper portion of the previous two rows of glass. A great deal of effort was expended in correcting this problem, and fitting of protective ledges below the new smaller windows proved successful. A new enclosed Admiral's bridge with its requisite reduced windows was built on top of the Captain's bridge and the forward signalling lamps were moved up one level and towards the aft of the bridge. The Admiral's bridge on Rodney remained stepped back somewhat from the forward edge of the tower, but the Captain's bridge had the same reduced area of glass that Nelson now had, with larger ledges. [3] Blast was also a problem elsewhere; D.K. Brown tells of a test firing that was suspended when DNC observer H.S. Pengelly, who was beneath the foredeck, reported a bright red flash after firing all guns in "A" turret. This was later discovered to be caused by concussion of the observers' eyeballs. [4] [ page needed ]

In the final phase of the action against Bismarck, Rodney fired a pair of 24.5-inch torpedoes from her port-side tube and claimed one hit. [14] [15] [16] [17] According to Ludovic Kennedy, "if true, [this is] the only instance in history of one battleship torpedoing another". [18] [ page needed ] Earlier in this same action the starboard side tube had its sluice door jammed as the result of a near miss from one of Bismarck's early salvos. On 27 September 1941, Nelson's port torpedo station almost proved to be a liability when an Italian air-launched 18-inch torpedo holed the compartment behind the torpedo body room, allowing 3,750 tons of water to enter the ship. Following this, Nelson's torpedo tubes may have been removed [19] although another source suggests the torpedo tubes were retained in both ships into 1945. [20]

Summary

3-view profile drawing of HMS Nelson as she was in 1931, with Fairey Flycatcher aircraft carried amidships HMS Nelson (1931) profile drawing.png
3-view profile drawing of HMS Nelson as she was in 1931, with Fairey Flycatcher aircraft carried amidships

Because of their unusual silhouette, HMS Nelson and her sister Rodney were nicknamed Nelsol and Rodnol by Royal Navy sailors as their single-funnelled silhouettes reminded Navy men of a series of fleet oilers (oil tankers) that had been built during the First World War bearing names ending in "ol". [21]

Despite the derisive criticism directed at this class of battleship by some of the media and some sailors upon their debut, naval historian Antony Preston considered that "they were soundly conceived ships reflecting all the hard-won experience of World War One" and that "they proved to be very well-protected and well-designed ships". [2] [ page needed ]

Ships in class

Construction data
NameNamesakeBuilderOrdered Laid down Launched Commissioned Fate
Nelson Vice-admiral Horatio Nelson Armstrong Whitworth, Walker 11 December 192228 December 19223 September 192515 August 1927Sold for scrap, 5 January 1949
Rodney Admiral George Rodney Cammell Laird, Birkenhead 17 December 19257 December 1927Sold for scrap, 19 March 1948

Construction and career

Nelson and Rodney HMS Nelson & HMS Rodney.jpg
Nelson and Rodney

By the end of the war, Rodney had seen hard use without any significant refit or repair and was worn out, especially her machinery. [10] [ page needed ]Nelson had been refitted in the United States at the end of 1944 and was in sufficiently good condition to serve in the postwar fleet including a short period as flagship of the Home Fleet at the end of 1945. Rodney was scrapped in 1948 at Inverkeithing, not long after the Revenge-class battleships and Queen Elizabeth-class battleships, and Nelson in 1949 following its use as a target for bombing trials. "According to Winston Churchill's memoirs, a major modernisation was discussed to enable Nelson to serve for several years in the postwar fleet, but no other details have survived. In any case Nelson was too slow for the modern fleet which had no front-line role for battleships any more". [22]

Notes

  1. Konstam, Angus (2009). British Battleships 1939–45 (2): Nelson and King George V Classes. New Vanguard No. 160. Osprey Publishing. ISBN   9781846033896..
  2. 1 2 3 4 5 Preston 1981
  3. 1 2 3 4 5 6 7 8 Burt, p.
  4. 1 2 3 4 Brown 1999, p.
  5. Burt, pp. 348–349
  6. Raven & Roberts, pp. 126–127
  7. Burt, pp. 350, 357–359
  8. Raven & Roberts, pp. 114, 124–125
  9. Raven, Alan (1976). British battleships of World War Two : the development and technical history of the Royal Navy's battleships and battlecruisers from 1911 to 1946. John, January 16- Roberts. Annapolis: Naval Institute Press. ISBN   0-87021-817-4. OCLC   2765218.
  10. 1 2 HMS Rodney, Iain Ballantyne, Pen & Sword Books, ISBN   978 1 84415 406 7
  11. French Battleships 1922-1956, John Jordan & Robert Dumas, Seaforth Publishing, ISBN   978 1 84832 034 5
  12. Reports of Proceedings 1921–1964, G.G.O. Gatacre, ISBN   0 949756 02 4
  13. Raven & Roberts, p. 118
  14. Reports of Proceedings 1921-1964, G.G.O. Gatacre, Nautical Press & Publications, Sydney, 1982, ISBN   0 949756 02 4, pg.140
  15. On His Majesty's Service, 1940-41, Joseph H. Wellings, http://www.ibiblio.org/anrs/docs/D/D7/1002wellings_onhismajestysservice.pdf
  16. Ballantyne, p. 142
  17. Killing the Bismarck, Iain Ballantyne, Pen & Sword Books, Yorkshire, ISBN   978 1 84415 983 3, pp. 258–260.
  18. Pursuit: The Sinking of the Bismarck, Ludovic Kennedy, William Collins, ISBN   0 00 211739 8
  19. Conway's All the World's Fighting Ships 1922-1946 (First American ed.). New York City: Mayflower Books Inc. 1980. p. 14. ISBN   0-8317-0303-2.
  20. Burt, p. 377
  21. Preston 1981 p 123
  22. Conway's Battleships, Ian Sturnton, Conway Maritime Press, London, 2008, ISBN   978 1 844860 685, p. 135

Related Research Articles

<span class="mw-page-title-main">Heavy cruiser</span> Type of cruiser warship

A heavy cruiser was a type of cruiser, a naval warship designed for long range and high speed, armed generally with naval guns of roughly 203 mm (8 inches) in calibre, whose design parameters were dictated by the Washington Naval Treaty of 1922 and the London Naval Treaty of 1930.

<i>King Edward VII</i>-class battleship Pre-dreadnought battleship class of the British Royal Navy

The King Edward VII class was a class of eight pre-dreadnought battleships launched by the Royal Navy between 1903 and 1905. The class comprised King Edward VII, the lead ship, Commonwealth, Hindustan, Britannia, Dominion, New Zealand, Africa, and Hibernia. They marked the first major development of the basic pre-dreadnought type that had been developed with the Majestic type of the mid-1890s, all of which had been designed by the Director of Naval Construction, William Henry White, with the primary innovation being the adoption of a heavy secondary battery of four 9.2-inch (234 mm) guns to supplement the standard main battery of four 12 in (305 mm) guns. The King Edward VIIs were among the last pre-dreadnoughts built for the Royal Navy before the construction and launch of the revolutionary battleship HMS Dreadnought in 1906, which immediately rendered them obsolescent.

<i>King George V</i>-class battleship (1939) 1939 class of battleships of the Royal Navy

The King George V-class battleships were the most modern British battleships in commission during the Second World War. Five ships of this class were built: HMS King George V, HMS Prince of Wales (1941), HMS Duke of York (1941), HMS Anson (1942) and HMS Howe (1942). The names honoured King George V, and his sons, Edward VIII, who had been Prince of Wales, and George VI who was Duke of York before ascending to the throne; the final two ships of the class were named after prominent 18th century admirals of the Royal Navy.

HMS <i>Rodney</i> (29) 1927 Nelson-class battleship of the Royal Navy

HMS Rodney was one of two Nelson-class battleships built for the Royal Navy in the mid-1920s. The ship entered service in 1928, and spent her peacetime career with the Atlantic and Home Fleets, sometimes serving as a flagship when her sister ship, Nelson, was being refitted. During the early stages of the Second World War, she searched for German commerce raiders, participated in the Norwegian Campaign, and escorted convoys in the Atlantic Ocean. Rodney played a major role in the sinking of the German battleship Bismarck in mid-1941.

<i>Renown</i>-class battlecruiser Battlecruisers built during the First World War

The Renown class consisted of two battlecruisers built during the First World War for the Royal Navy. They were originally laid down as improved versions of the Revenge-class battleships, but their construction was suspended on the outbreak of war on the grounds they would not be ready in a timely manner. Admiral Lord Fisher, upon becoming First Sea Lord, gained approval to restart their construction as battlecruisers that could be built and enter service quickly. The Director of Naval Construction (DNC), Eustace Tennyson-D'Eyncourt, quickly produced an entirely new design to meet Admiral Lord Fisher's requirements and the builders agreed to deliver the ships in 15 months. They did not quite meet that ambitious goal, but they were delivered a few months after the Battle of Jutland in 1916. They were the world's fastest capital ships upon their commissioning.

<i>Bellerophon</i>-class battleship British ship class

The Bellerophon-class battleship was a group of three dreadnought battleships that were built for the Royal Navy in the first decade of the 20th century. The sister ships spent most of their careers assigned to the Home and Grand Fleets. Aside from participating in the Battle of Jutland in May 1916, and the inconclusive action of 19 August several months later, their service during the First World War generally consisted of routine patrols and training in the North Sea.

County-class cruiser Class of heavy cruisers built for the Royal Navy of the United Kingdom

The County class was a class of heavy cruisers built for the Royal Navy in the years between the First and Second World Wars. They were the first post-war cruisers constructed for the Royal Navy and were designed within the limits of the Washington Naval Treaty of 1922. Such ships, with a limit of 10,000 tons standard displacement and 8-inch calibre main guns may be referred to as "treaty cruisers".

HMS <i>Vanguard</i> (23) Fast British battleship

HMS Vanguard was a British fast battleship built during the Second World War and commissioned after the war ended. She was the largest and fastest of the Royal Navy's battleships, the only ship of her class, and the last battleship to be built.

HMS <i>Nelson</i> (28) 1927 Nelson-class battleship of the Royal Navy

HMS Nelson was the name ship of her class of two battleships built for the Royal Navy in the 1920s. They were the first battleships built to meet the limitations of the Washington Naval Treaty of 1922. Entering service in 1927, the ship spent her peacetime career with the Atlantic and Home Fleets, usually as the fleet flagship. During the early stages of World War II, she searched for German commerce raiders, missed participating in the Norwegian Campaign after she was badly damaged by a mine in late 1939, and escorted convoys in the Atlantic Ocean.

HMS <i>Dreadnought</i> (1906) British battleship that revolutionised ship design

HMS Dreadnought was a Royal Navy battleship, the design of which revolutionised naval power. The ship's entry into service in 1906 represented such an advance in naval technology that her name came to be associated with an entire generation of battleships, the dreadnoughts, as well as the class of ships named after her. Likewise, the generation of ships she made obsolete became known as pre-dreadnoughts. Admiral Sir John "Jacky" Fisher, First Sea Lord of the Board of Admiralty, is credited as the father of Dreadnought. Shortly after he assumed office in 1904, he ordered design studies for a battleship armed solely with 12 in (305 mm) guns and a speed of 21 knots. He convened a Committee on Designs to evaluate the alternative designs and to assist in the detailed design work.

<i>Colossus</i>-class battleship (1910) Class of battleships of the Royal Navy

The Colossus-class battleships were a pair of dreadnought battleships built for the Royal Navy (RN) at the end of the first decade of the 20th century, the last 12-inch-gunned (305 mm) battleships built for the RN. The sister ships spent their whole careers assigned to the Home and Grand Fleets, often serving as flagships. Aside from participating in the Battle of Jutland in May 1916, and the inconclusive action of 19 August several months later, their service during the First World War generally consisted of routine patrols and training in the North Sea.

<i>Lord Nelson</i>-class battleship Pre-dreadnought battleship class of the British Royal Navy

The Lord Nelson class consisted of a pair of pre-dreadnought battleships built for the Royal Navy in the first decade of the twentieth century. Although they were the last British pre-dreadnoughts, both were completed and commissioned well over a year after HMS Dreadnought had entered service in late 1906. Lord Nelson and Agamemnon were assigned to the Home Fleet when completed in 1908, with the former ship often serving as a flagship. The sister ships were transferred to the Channel Fleet when the First World War began in August 1914. They were transferred to the Mediterranean Sea in early 1915 to participate in the Dardanelles Campaign.

<i>Duke of Edinburgh</i>-class cruiser British class of armoured cruisers

The Duke of Edinburgh-class cruiser was a class of two armoured cruisers built for the Royal Navy in the first decade of the 20th century. They were the first British armoured cruisers designed to work with the battlefleet rather than protect merchant shipping. After commissioning, they were assigned to the Atlantic, Channel and Home Fleets until 1913 when they were transferred to the Mediterranean Fleet. After the start of World War I in August 1914, the sister ships participated in the pursuit of the German battlecruiser SMS Goeben and light cruiser SMS Breslau. After the German ships reached their refuge in Ottoman Turkey, the ships were ordered to the Red Sea for convoy escort duties. They captured three German merchant ships before they returned to home at the end of the year.

The Admiral-class battlecruisers were to have been a class of four British Royal Navy battlecruisers built near the end of World War I. Their design began as an improved version of the Queen Elizabeth-class battleships, but it was recast as a battlecruiser after Admiral John Jellicoe, commander of the Grand Fleet, pointed out that there was no real need for more battleships, but that a number of German battlecruisers had been laid down that were superior to the bulk of the Grand Fleet's battlecruisers and the design was revised to counter these. The class was to have consisted of HMS Hood, Anson, Howe, and Rodney — all names of famous admirals — but the other three ships were suspended as the material and labour required to complete them was needed for higher-priority merchantmen and escort vessels. Their designs were updated to incorporate the lessons from the Battle of Jutland, but the Admiralty eventually decided that it was better to begin again with a clean-slate design so they were cancelled in 1919. No more battlecruisers would be built due to the arms limitations agreements of the interbellum.

G3 battlecruiser Class of battlecruisers of the Royal Navy

The G3 class was a class of battlecruisers planned by the Royal Navy after the end of World War I in response to naval expansion programmes by the United States and Japan. The four ships of this class would have been larger, faster and more heavily armed than any existing battleship. The G3s have been considered to be proper "fast battleships" since they were well-balanced designs with adequate protection. Nonetheless the class was officially designated as a "battlecruiser" due to their higher speed and lesser firepower and armour relative to the planned N3-class battleship design. The G3s would have carried nine 16-inch (406 mm) guns and were expected to achieve 32 knots, while the N3s would carry nine 18-inch (457 mm) guns on the same displacement at the expense of speed.

The N3 class was a dreadnought battleship class designed for the Royal Navy after World War I, incorporating lessons learned from that conflict. They were similar in design to the G3-class battlecruiser, but had larger guns and thicker armour. They were never ordered due to signing of the Washington Naval Treaty in 1922, which limited the size and armament of battleships to 35,000 long tons (36,000 t) and guns no bigger than 16 inches (406 mm).

<span class="mw-page-title-main">BL 14-inch Mk VII naval gun</span> Naval gun

The BL 14-inch Mk VII naval gun was a breech loading (BL) gun designed for the battleships of the Royal Navy in the late 1930s. This gun armed the King George V-class battleships during the Second World War.

<span class="mw-page-title-main">Dreadnought</span> Early 20th century battleship type

The dreadnought was the predominant type of battleship in the early 20th century. The first of the kind, the Royal Navy's HMS Dreadnought, had such an effect when launched in 1906 that similar battleships built after her were referred to as "dreadnoughts", and earlier battleships became known as pre-dreadnoughts. Her design had two revolutionary features: an "all-big-gun" armament scheme, with an unprecedented number of heavy-calibre guns, and steam turbine propulsion. As dreadnoughts became a crucial symbol of national power, the arrival of these new warships renewed the naval arms race between the United Kingdom and Germany. Dreadnought races sprang up around the world, including in South America, lasting up to the beginning of World War I. Successive designs increased rapidly in size and made use of improvements in armament, armour, and propulsion throughout the dreadnought era. Within five years, new battleships outclassed Dreadnought herself. These more powerful vessels were known as "super-dreadnoughts". Most of the original dreadnoughts were scrapped after the end of World War I under the terms of the Washington Naval Treaty, but many of the newer super-dreadnoughts continued serving throughout World War II.

<i>Katori</i>-class battleship Imperial Japanese Navys Katori-class of pre-dreadnought battleships

The Katori class was a two-ship class of pre-dreadnought battleships built for the Imperial Japanese Navy (IJN) in the early 1900s. As Japan lacked the industrial capacity to build such warships itself, they were designed and built in the UK. They were the last pre-dreadnought battleships to be built for Japan at overseas shipyards, and the last to be equipped with a ram. The ships were delivered after the end of the Russo-Japanese War of 1904–1905. They saw no action during World War I, although both were present when Japan joined the Siberian Intervention in 1918. They were disarmed and scrapped in 1923–1925 in accordance with the terms of the Washington Naval Treaty of 1922.

References