Chief | |
---|---|
![]() | |
Model 65CA | |
Role | Civil utility aircraft |
National origin | United States of America (USA) |
Manufacturer | Aeronca |
First flight | 1937 [1] |
Produced | 1936 to 1949 |
Number built | ca 13,700 [2] |
Developed from | Aeronca C |
Variants | |
The Aeronca K series, Aeronca Chief, Aeronca Super Chief, Aeronca Tandem, Aeronca Scout, Aeronca Sea Scout, Aeronca Champion and Aeronca Defender were a family of American high-winged light touring aircraft, designed and built starting in the late 1930s by Aeronca Aircraft. [1]
Aeronca was noted for producing light side-by-side two-seat touring aircraft since the introduction of the Aeronca C-2 in 1929. A more refined aircraft with an improved undercarriage and steel tube wing bracing struts in place of wires, was developed in 1937 as the Aeronca K, powered by a 42 hp (31 kW) Aeronca E-113 engine, beginning the long line of Aeronca high wing touring, training, military liaison and observation aircraft of the 1930s and 1940s. The K series was powered by a variety of 40 hp (30 kW) to 50 hp (37 kW) Aeronca, Continental, Franklin or Menasco engines. [1]
Consumer demand for more comfort, longer range and better instrumentation resulted in development of the Aeronca 50 Chief in 1938. Although little more than an incremental development of the K series the Model 50 heralded a new designation system used for the high-winged tourers, including the manufacturer and power rating of the engine, dropping the letter designation system. Thus the Aeronca 65CA Super Chief' was powered by a 65 hp (48 kW) Continental A-65 with side-by-side seating and improvements over the 65C Super Chief. Other developments included tandem seating for use as trainer, liaison, observation aircraft or glider trainers as well as float-plane versions. Throughout the production life of the Aeronca Chief family the aircraft was improved incrementally, from a rather basic specification to a reasonably comfortable tourer with car-style interior. [1]
The Aeronca high-wing formula used a welded steel tube fuselage covered with fabric, wooden wings covered with plywood and fabric braced by V-struts to the rear undercarriage attachment point on the lower fuselage. Tail surfaces were also built up with welded steel tubing covered with fabric. The fixed tail-wheel undercarriage, sprung with oleo struts and faired triangular side members hinged at the fuselage. A small tail-wheel on a spring steel leaf at the extreme rear of the fuselage completed the under-carriage. The engine is fitted conventionally in the nose and was either semi-cowled or fully cowled using sheet aluminium alloy, depending on model. Some civilian models had side-by-side seating in a well-glazed cabin under the wing centre-section, with entry through car style doors either side. A tandem seating arrangement was developed for training and military models with the rear seat mounted 9 in (229 mm) inches higher than the front to allow the instructor to use the same instruments as the trainee and improve forward view from the back seat. Tandem seat aircraft had extensively glazed cockpits to allow good all-round visibility. [1]
A wide variety of engines were available for use on the Aeronca Chief series, including home grown Aeronca engines and Continental, Franklin, Menasco or Lycoming engines. The engine installed was reflected in the designation using the initial letter as a suffix in the designation. [1]
Aeronca continued development during World War II, introducing the tandem seating Aeronca 7 Champion, taking advantage of the refinements developed with previous versions. The Champion is often regarded as a completely new design, but the influence of the Chief and Tandem is readily apparent. A side-by-side version was also introduced in 1945 as the Aeronca 11 Chief. Military versions of the Aeronca 7 series were operated by the USAF as the Aeronca L-16. [1]
Civilian aircraft proved popular as touring aircraft and as trainers. Military aircraft found employment as trainer, liaison, observation aircraft primarily with the USAAF. [1]
Data from:Aerofiles.com [2]
Data from American Planes and Engines for 1940 [6]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Piper J-3 Cub is an American light aircraft that was built between 1938 and 1947 by Piper Aircraft. The aircraft has a simple, lightweight design which gives it good low-speed handling properties and short-field performance. The Cub is Piper Aircraft's most-produced model, with nearly 20,000 built in the United States. Its simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile.
The Continental C90 and O-200 are a family of air-cooled, horizontally opposed, four-cylinder, direct-drive aircraft engines of 201 in3 displacement, producing between 90 and 100 horsepower.
The Continental O-170 engine is the collective military designation for a family of small aircraft engines, known under the company designation of A50, A65, A75 and A80. The line was designed and built by Continental Motors commencing in the 1940s. It was employed as the powerplant for civil and military light aircraft.
The Taylorcraft B is an American light, single-engine, high-wing general aviation monoplane, with two seats in side-by-side configuration, that was built by the Taylorcraft Aviation Corporation of Alliance, Ohio.
The Citabria is a light single-engine, two-seat, fixed conventional gear airplane which entered production in the United States in 1964. Designed for flight training, utility and personal use, it is capable of sustaining aerobatic stresses from +5g to -2g. Its name, "airbatic" backwards, reflects this.
The Aeronca L-3 group of observation and liaison aircraft were used by the United States Army Air Corps in World War II. The L-3 series were adapted from Aeronca's pre-war Tandem Trainer and Chief models.
The Luscombe 8 is a series of high-wing, side-by-side-seating monoplanes with conventional landing gear, designed in 1937 and built by Luscombe Aircraft.
The Piper J-4 Cub Coupe is a two place side-by-side version of the Piper J-3 that was built between 1938 and 1942 by Piper Aircraft. It was Piper's first model with side-by-side seating.
The Interstate Cadet was an American two-seat tandem, high wing, single-engine monoplane light aircraft. Around 320 of these aircraft were produced between the years 1941 and 1942 by the Interstate Aircraft and Engineering Corporation based in El Segundo, California. The construction techniques employed were a welded steel tube fuselage, wood (spruce) wing structure with metal ribs, and fabric covering, all of which were fairly standard in the 1940s.
The Aeronca Model 50 Chief was an American light plane of the late 1930s. Consumer demand for more comfort, longer range and better instrumentation resulted in its development in 1938, powered by a 50-horsepower (37-kilowatt) Continental, Franklin or Lycoming engine. A 65-horsepower (48-kilowatt) Continental engine powered the Model 65 Super Chief, which was also built in a flight trainer version, the Model TC-65 Defender, with its rear seat positioned nine inches higher than the front for better visibility.
The Aeronca Model 7 Champion, commonly known as the "Champ", or "Airknocker", is a single-engine light airplane with a high wing, generally configured with fixed conventional landing gear and tandem seating for two occupants.
The Franklin O-150 was an American air-cooled aircraft engine of the late 1930s. The engine was of four-cylinder, horizontally-opposed layout and displaced 150 cu in (2 L). The power output was nominally 40 hp (30 kW).
The Culver Cadet is an American two-seat light monoplane aircraft, also as a radio-controlled drone, produced by the Culver Aircraft Company.
The CAP-4 Paulistinha was a military and civilian trainer aircraft built in Brazil during the 1930s and 1940s.
The Stinson Voyager was an American light utility monoplane built during the 1940s by the Stinson Aircraft Company.
The Porterfield Collegiate is an American-built two-seat training and touring monoplane built by the Porterfield Aircraft Corporation of Kansas City.
The Jurca MJ-5 Sirocco is a two-seat sport aircraft designed in France in the early 1960s and marketed for homebuilding. It is one of many wooden homebuilt designs from Romanian born designer Marcel Jurca. Jurca, a Henschel Hs 129 pilot in World War II marketed the plans in Canada and America through Falconar Aviation. It is a low-wing cantilever monoplane of conventional configuration and wooden construction throughout. The tandem seats are enclosed by a bubble canopy, and the tailwheel undercarriage can be built as either fixed or with retractable main units. Marcel Jurca died on 19 October 2001, at which time plans were still available from the designer's website.
The Lycoming O-145 is a family of small, low-horsepower, four-cylinder, air-cooled engines. It was Lycoming Engines' first horizontally opposed aircraft engine and was produced from 1938 until the late 1940s. The family includes the reduction-geared GO-145. The O-145 received its Approved Type Certificate on 13 Jun 1938.
The Stout Skycar was a series of four one-off American light aircraft of the 1930s.
The Taylorcraft Model D is a light aircraft of the US manufacturer Taylorcraft Aviation from the early 1940s.