Bolton Union Mill, Bolton

Last updated

Bolton Union Mill
Bolton Union Mill, Bolton 0011.png
The mill before 1951
Greater Manchester UK location map 2.svg
Red pog.svg
Location in Greater Manchester
Cotton
Spinning (ring mill)
Location Halliwell, Bolton, Greater Manchester
Further ownership
Coordinates 53°35′00″N2°26′15″W / 53.5834°N 2.4375°W / 53.5834; -2.4375 Coordinates: 53°35′00″N2°26′15″W / 53.5834°N 2.4375°W / 53.5834; -2.4375
Construction
Floor area15,466.00
Power
Engine maker John Musgrave & Sons
Engine typetandem compound engine
Valve Gear Corliss valves
Cylinder diameter and throw28"HP, 52"LP X 6ft stroke
rpm50
Installed horse power (ihp)1200hp
Flywheel diameter32ft
No. of ropes28
Equipment
Mule Frames40's-50's counts
Ring Frames path40's counts
References
[1]

Bolton Union Mill was a cotton spinning mill in Halliwell, Bolton, Greater Manchester. It was built in 1875 and 1880. It was taken over by the Lancashire Cotton Corporation in the 1930s and brought back into production. Subsequently, it passed to Tootals and Dewhurst Dent in 1964. Production finished in 1967.

Contents

The building is still standing. It has 15,466 m2 (166,470 sq ft) of floor space and was driven by a 1200 hp tandem compound J Musgrave engine with a 32 ft (9.8 m) flywheel with 28 ropes operated at 50rpm.

History

Bolton was a mill town; textiles have been produced in Bolton since Flemish weavers settled in the area during the 15th century, developing a wool and cotton weaving tradition. The urbanisation and development of Bolton largely coincided with the introduction of textile manufacture during the Industrial Revolution. It was a boomtown of the 19th century and at its zenith, in 1929, its 216  cotton mills and 26 bleaching and dying works made it one of the largest and most productive centres of cotton spinning in the world.

No. 1 Mill Built was built in 1875, and No2 Mill was built in 1880. a further site was operated from 1884 by John Hebden and Son, Vernon Mills. The Bolton Union Spinning Company Co Ltd was constituted in 1874 and was operating the mills in 1900. Mill No3 was built in 1902–1905. It is not recorded when production stopped. [2]

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–18 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry. [3] Bolton Union Mill, Bolton was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950.

Bolton Union Mill in 2016 Bolton Union Mill.JPG
Bolton Union Mill in 2016

LCC received permission to re-open the mills in 1946 but in 1961 the mills were bought by Barlow & Jones and Mill No. 1 demolished. In 1976 the other mills were closed by Tootals Ltd. In 1985 No. 1 Mill site was landscaped for use as playing fields and No2 Mill was used by Dewhurst Dent Holdings Ltd, G & R Dewhurst (CMT) Curtains Ltd, Dewhurst Printing Company. [2]

The mill was to be demolished (2008) and replaced with apartments, because the council sees the mill as no longer reflecting the image of the surrounding area. [2] In 2016, it was still standing and in use.

Architecture

Power

Driven by 1200 hp tandem compound engine by John Musgrave & Sons, operating at 100psi. It had a 32-foot flywheel with 28 ropes, operated at 50rpm. The cylinders, 28"HP, 52"LP had a 6-foot stroke. The air pump was driven from the crosshead. [4]

Owners

See also

Related Research Articles

Trencherfield Mill Cotton mill in Greater Manchester, England

Trencherfield Mill is a cotton spinning mill standing next to the Leeds and Liverpool Canal in Wigan, Greater Manchester, England. It was built in 1907. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The mill was driven by a 2,500 hp triple-expansion four-cylinder engine built by J & E Wood of Bolton in 1907. The two halves of the engine were called Rina and Helen. They drove a 26-foot flywheel with 54 ropes at 68 rpm. The engine was stopped in 1968. The mill is now part of the Wigan Pier redevelopment area and is used for other purposes.

Regent Mill, Failsworth Cotton mill in Greater Manchester, England

Regent Mill, Failsworth is a Grade II listed former cotton spinning mill in Failsworth, Oldham, Greater Manchester, England. It was built by the Regent Mill Co Ltd. in 1905, and purchased by the Lancashire Cotton Corporation in 1930. It was taken over by the Courtaulds Group in 1964. On ceasing textile production it was occupied by Pifco Ltd, and then by Salton Europe Ltd who now occupy this site. It was driven by an 1800 hp twin tandem compound engine by Buckley & Taylor. It became a ring mill with 60,000 spindles in 1915, all provided by Platt Brothers.

Rutland Mill Cotton mill in Greater Manchester, England

Rutland Mill was a cotton spinning mill on Linney Lane, in Shaw and Crompton, Greater Manchester, England. It was built by F. W. Dixon & Son in 1907 for the Rutland Mill Co. Ltd. It was taken over by the Lancashire Cotton Corporation in 1935. By 1964, it was in the Courtaulds Group. In the late 1980s, as Courtaulds moved operations to other parts of the world, the mill was bought by Littlewoods who demolished it and replaced it with a new automated storage warehouse.

Magnet Mill, Chadderton Cotton Mill in Greater Manchester, England

Magnet Mill, Chadderton is a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built by the Magnet Mill Ltd. in 1902, but purchased by the Lancashire Cotton Corporation in 1935. It was later taken over by the Courtaulds Group. Ceasing textile production in December 1966, it was demolished soon after. A suburban residential estate now occupies this site. It was driven by a 2200 hp twin tandem compound engine by George Saxon & Co, Openshaw, 1903. It had a 27-foot flywheel with 35 ropes, operating at 64½ rpm.

Ace Mill, Hollinwood

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

Century Mill, Farnworth Cotton spinning mill in Bolton, Greater Manchester, England

Century Mill, Farnworth is a former cotton spinning mill in Farnworth, Bolton, Greater Manchester, England which was built in the early 20th century for ring spinning. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The 6,674.00-square-metre (71,838.3 sq ft) building is still in use for various other purposes in 2016.

Coppull Mill Cotton mill in Chorley, Lancashire, England

Coppull Mill is a former cotton spinning mill in Coppull, Chorley, Lancashire. It was opened in 1906, and its sister mill, Mavis Mill in 1908. Together they employed 700 workers. The mill was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The building is a Grade II listed building and is now used as an enterprise centre. This was a ring mill. It was driven by a 1600 hp triple-expansion four-cylinder engine by J & E Wood built in 1906. Its 26-foot (7.9 m) flywheel operated at 68 rpm and ran 36 ropes.

Mavis Mill Cotton mill in Lancashire, England

Mavis Mill was a cotton spinning mill in Coppull, Chorley, Lancashire

Wilton Mill, Radcliffe Cotton mill in Greater Manchester, England

Wilton Mill, Radcliffe was a cotton spinning mill in Radcliffe, Bury, Greater Manchester. It was built in 1907 and was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it was used by the East Lancashire Paper Company but has now been demolished leaving an empty site next to the railways and the River Irwell.

Royton Ring Mill, Royton Cotton mill in Greater Manchester, England

Royton Ring Mill was a cotton mill in Royton, Greater Manchester, England. It was built in 1908 and extended in 1912. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964. Production finished in 1966. It was extended again in 1969 and used for other purposes. It has now been demolished, the street has been renamed and houses replace it.

Saxon Mill, Droylsden Cotton mill in Greater Manchester, England

Saxon Mill, Droylsden was a cotton spinning mill in Droylsden, Tameside, Greater Manchester, England. It was built in the 1907, taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1967, and the mill was demolished in 1995.

Stalybridge Mill, Stalybridge Cotton mill in Greater Manchester, England

Stalybridge Mill, Stalybridge is a cotton spinning mill in Stalybridge, Tameside, Greater Manchester, England. It was built in 1868, and the engine reconfigured in around 1925. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

May Mill, Pemberton Cotton mill in Greater Manchester, England

May Mill, Pemberton is a cotton spinning mill in Pemberton, Wigan, Greater Manchester, England. Historically in Lancashire, it was built in 1889. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1962–63 to produce carpet fibre, which it continued to do until its closure on 17 October 1980.

Pilot Mill, Bury Cotton mill in Greater Manchester, England

Pilot Mill, Bury is a four-storey cotton spinning mill in Bury, Greater Manchester, England. It was built in 1905. It was taken over by the Lancashire Cotton Corporation in 1939 and passed to Courtaulds in 1964. Production finished, it survived and as of 2010 it was in use by Antler Luggage. The Mill is currently occupied by Baum Trading Ltd and Metzuyan Ltd they have opened a retail outlet with an on site cafe.

Kent Mill, Chadderton

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

Manor Mill, Chadderton Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

Heron Mill, Hollinwood Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

Royd Mill, Oldham Cotton mill in Greater Manchester, England

Royd Mill, Oldham was a cotton spinning mill in Hollinwood, Oldham, Greater Manchester, England. It was built in 1907, and extended in 1912 and 1924. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1981. The mill was demolished in 2015 to make way for a "DifRent" housing scheme.

Orme Mill, Waterhead Cotton mill in Greater Manchester, England

Orme Mill, Waterhead is a cotton spinning mill in Waterhead, Oldham, Greater Manchester, England. It was built in 1908. It was taken over by the Lancashire Cotton Corporation in the 1930s and production finished in 1960. The mill was passed on to Ferranti in 1964, and is now in multiple usage.

Malta Mill, Middleton Cotton mill in Greater Manchester, England

Malta Mill, Middleton is a former cotton spinning mill in the Mills Hill area of Chadderton, Greater Manchester. It lies alongside the Rochdale Canal. It was built in 1904 as a new mule mill, by F. W. Dixon The engine stopped in 1963. The building still stands.

References

  1. ↑ LCC 1951
  2. 1 2 3 David Dixon. "Bolton Union Mills (union, vernon, hebden mills)". St Mark's School, Bolton site. Archived from the original on 1 December 2008. Retrieved 8 November 2009.
  3. ↑ Dunkerley 2009
  4. ↑ Roberts 1921

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.