Daniel Gooch standard gauge locomotives

Last updated

The Daniel Gooch standard gauge locomotives comprise several classes of locomotives designed by Daniel Gooch, Superintendent of Locomotive Engines for the Great Western Railway (GWR) from 1837 to 1864.

Contents

History

In 1854 the GWR absorbed two standard gauge lines, the Shrewsbury and Chester Railway and the Shrewsbury and Birmingham Railway to become the GWR's Northern Division. Consequently, from then until his retirement in 1864, Daniel Gooch (the company's Superintendent of Locomotive Engines, a post he had occupied since 1837), although a passionate advocate of the GWR's original broad gauge, of necessity also became responsible for designing standard gauge locomotives for the new Northern Division. From 1858 the construction of standard gauge engines started at the newly enlarged Northern Division Works at Stafford Road, Wolverhampton; these were designed by Joseph Armstrong, the Wolverhampton Locomotive Superintendent that the GWR had inherited along with the S&BR.

Alongside these Armstrong locomotives, several other standard gauge locomotive classes were built during these years under the aegis of Gooch himself, either at the Great Western's principal works at Swindon, or else by outside firms, Swindon and Wolverhampton between them not yet having sufficient capacity for all the necessary new construction. Though these engines were mostly designed by Gooch himself, sometimes the influence of Joseph Armstrong may be evident.

Classes

The classes concerned are as follows:

57 Class

Nos. 57-68, twelve 0-6-0 freight engines designed by Gooch built at Swindon in 1855-6. They were typical Gooch engines, resembling his broad gauge Standard Goods, suitably narrowed for the standard gauge. On delivery they had to be transported to Wolverhampton on specially constructed broad gauge wagons. Between 1873 and 1890, all were "renewed" at Wolverhampton - that is, built afresh with minimal use of parts from the original engines - and in 1890-91 William Dean added, for some reason, three more to the class, as Nos. 316-8. With a few exceptions the class remained in the Northern Division, and the last was withdrawn in 1927. [1] Nos. 60 and 67 ran between 1876/7 and 1886 as saddle tank engines, having been renewed in that form by George Armstrong. [2]

69 Class

GWR 69 class No. 72, as running 1887-95 GWR 69 class.jpg
GWR 69 class No. 72, as running 1887–95

Nos. 69-76, eight Gooch 2-2-2 s for the Wolverhampton-Shrewsbury line, built 1855-6 by Beyer, Peacock & Co. in Manchester. Four of these engines were the very first to be built by Beyer, Peacock, at their brand-new Gorton Works. In 1861, when standard gauge trains started to run through on the mixed gauge to Paddington, the engines moved south to work on the London-Oxford-Wolverhampton sections. In the 1872–75 period, the locomotives were "renewed" by George Armstrong at Wolverhampton, i.e. replaced by what were "from an engineering viewpoint new engines." Cabs were fitted from 1880, and new boilers of a different design were fitted to all except no. 69 between 1887 and 1893. Then in 1895–97, under William Dean at Swindon, they were reconstructed once more, emerging as 2-4-0 s of the "River" Class. [3] [4]

77 and 167 classes

Nos. 77, 78 and 167-170, seven 0-6-0 s built in 1857 and 1861 with boilers to Gooch's design but otherwise designed by the builders, Beyer, Peacock & Co. [5] [6]

79 Class

Nos.79-90 and 119-130, 24 0-6-0 freight engines designed by Gooch and built at Swindon in 1857 (79-90) and 1861-2. Very similar to the 57 class but with smaller driving wheels, they hauled the important coal traffic between Pontypool Road and Birkenhead (carrying fuel for the Atlantic liners, which burned Welsh steam coal). 13 of them were renewed under William Dean at Swindon, and they were withdrawn between 1905 and 1918. [7] The other 11 were rebuilt by George Armstrong as saddle tank locomotives, becoming the 119 class.

91 Class

Nos. 91 and 92, two 0-4-0 ST s supplied in 1857 by Beyer, Peacock & Co., to their own design, for shunting at the collieries around Wrexham. Though No.91 was withdrawn in 1877, its sister had a very long life, surviving until 1942, having spent its last three years as a stationary boiler at Wellington. [8]

93 Class

Nos 93 and 94, built 1860 at Swindon. These were the GWR's first 0-6-0 T locomotives. In 1875 and 1877 they were completely renewed at Wolverhampton to become members of the 1901 Class; just before this they are known to have been at Chester and Wolverhampton respectively. [9]

131 Class

28 0-6-0 s designed by Gooch: Nos. 131-6, built 1862 at Swindon; 137-148, built 1862 by Slaughter, Grüning & Co. of Bristol; and 310-19 built 1864-5 at Swindon. These locomotives used Stephenson, not Gooch valve gear, for the first time at Swindon; this may have been at Armstrong's suggestion. They were later renewed at Wolverhampton. [10] [11]

"Sharps" or 157 Class

Nos. 157-166, ten 2-2-2 s built in 1862 "to Gooch's specifications" by Sharp, Stewart and Company, and closely resembling the 69 Class. In 1879 Nos. 157, 161 and 163 were renumbered 172, 173 and 174 respectively, while the others were "renewed" in 1878-9, that is, withdrawn and replaced by ten officially new engines, William Dean's 157 Class. In their original form, the "Sharps" worked mainly on the Paddington-Wolverhampton expresses. [12]

"England" or "Chancellor" Class

Nos. 149-156, eight 2-4-0 s built in 1862 "to GWR drawings" by George England & Co. at the Hatcham Ironworks, New Cross, Surrey. They were stationed at Wolverhampton for expresses to the north, and were renewed in 1878-1883, also at Wolverhampton. [13] [11]

320 Class

Nos. 320 and 321, two 2-4-0 WT s built at Swindon in 1864 for working on the underground Metropolitan Railway in London. They were the first standard gauge engines anywhere to have condensers, though the system was not a success. Within ten years both were converted to tender engines, and they were withdrawn in 1881. [14]

322 or "Beyer" Class

Thirty 0-6-0 s built by Beyer, Peacock & Co. of Manchester. The first 20, Nos. 322-41, were ordered by Gooch and built in 1864; ten more, Nos. 350-59 followed in 1866, having been ordered by Armstrong. The latter were the last 19th-century GWR locomotives to be built by an outside contractor. Like the 79 Class, they were initially used between Pontypool Road and Birkenhead. Between 1878 and 1885, six were rebuilt at Wolverhampton as saddle tank engines. The rest were withdrawn between 1912 and 1934, and quite exceptionally three of the class, Nos. 354, 355 and 388, achieved mileages of over 1,500,000. [15]

Notes

  1. ↑ Tabor 1956, pp. D44–D47.
  2. ↑ le Fleming 1958, p. E30.
  3. ↑ Tabor 1956, pp. D6–D7.
  4. ↑ Holcroft 1953, pp. 42–3, 47.
  5. ↑ Tabor 1956, p. D49.
  6. ↑ Holcroft 1953, p. 43.
  7. ↑ Tabor 1956, pp. D47–D48.
  8. ↑ Tabor 1959, pp. F5–F6.
  9. ↑ le Fleming 1958, p. E12.
  10. ↑ Tabor 1956, pp. D50–D52.
  11. 1 2 Holcroft 1953, p. 49.
  12. ↑ Tabor 1956, p. D9.
  13. ↑ Tabor 1956, pp. D20–D21.
  14. ↑ Tabor 1959, pp. F26–F27.
  15. ↑ Tabor 1956, pp. D52–D55.

Sources

le Fleming, H. M. (April 1958). White, D. E. (ed.). The Locomotives of the Great Western Railway, part five: Six-coupled Tank Engines. RCTS. ISBN   0-901115-35-5. OCLC   500544510.

Related Research Articles

<span class="mw-page-title-main">Locomotives of the Great Western Railway</span> List of railway locomotives used by the Great Western Railway

The first Locomotives of the Great Western Railway (GWR) were specified by Isambard Kingdom Brunel but Daniel Gooch was soon appointed as the railway's Locomotive Superintendent. He designed several different 7 ft 1⁄4 in broad gauge types for the growing railway, such as the Firefly and later Iron Duke Class 2-2-2s. In 1864 Gooch was succeeded by Joseph Armstrong who brought his standard gauge experience to the workshops at Swindon. To replace some of the earlier locomotives, he put broad gauge wheels on his standard gauge locomotives and from this time on all locomotives were given numbers, including the broad gauge ones that had previously carried just names.

The Great Western Railway 3800 Class, also known as the County Class, were a class of 4-4-0 steam locomotives for express passenger train work introduced in 1904 in a batch of ten. Two more batches followed in 1906 and 1912 with minor differences. They were designed by George Jackson Churchward, who used standard components to produce a four-coupled version of his Saint Class 4-6-0s.

<span class="mw-page-title-main">GWR 7800 Class</span>

The Great Western Railway (GWR) 7800 Class or Manor Class is a class of 4-6-0 steam locomotive. They were designed as a lighter version of the Grange Class, giving them a wider Route Availability. Like the 'Granges', the 'Manors' used parts from the GWR 4300 Class Moguls but just on the first batch of twenty. Twenty were built between 1938 and 1939, with British Railways adding a further 10 in 1950. They were named after Manors in the area covered by the Great Western Railway. Nine are preserved.

<span class="mw-page-title-main">GWR 1400 Class</span> British 0-4-2T steam locomotive class

The GWR 1400 Class is a class of steam locomotive designed by the Great Western Railway for branch line passenger work. It was originally classified as the 4800 Class when introduced in 1932, and renumbered in 1946.

<span class="mw-page-title-main">Joseph Armstrong (engineer)</span> English locomotive engineer

Joseph Armstrong was an English locomotive engineer and the second locomotive superintendent of the Great Western Railway. His younger brother George and one of his sons also became outstanding engineers in the employment of the GWR.

<span class="mw-page-title-main">GWR 388 class</span>

The GWR 388 class was a large class of 310 0-6-0 goods locomotives built by the Great Western Railway. They are sometimes referred to as the Armstrong Goods or Armstrong Standard Goods to differentiate from the Gooch Goods and Dean Goods classes, both of which were also large classes of standard goods locomotives.

George Armstrong was an English railway engineer. He was in charge of standard gauge steam locomotives for the Great Western Railway at Stafford Road Works, Wolverhampton, from 1864 to 1897. He was the younger brother of his colleague Joseph Armstrong, but thanks to the special requirements of the GWR at a time when it was split in two by the broad and standard gauges, the brothers were able to work largely independently of each other. George is best remembered for his 0-4-2 and 0-6-0 tank engines; these were long-lived, and even when life-expired they were replaced by Collett and Hawksworth with remarkably similar locomotives, the well-known 1400, 5700 and 1600 classes.

The GWR 2201 Class was a class of 4 ft 8+1⁄2 instandard gauge2-4-0 steam locomotives built at Swindon Works under the aegis of William Dean for express passenger service on the Great Western Railway. Built in 1881–82, they were numbered 2201 to 2220.

The GWR 378 Class was a class of 30 standard-gauge 2-2-2 steam locomotives on the Great Western Railway in Britain. They were introduced in 1866, and the class remained intact until 1898. Several were altered to the 0-6-0 wheel arrangement, and the last was withdrawn from service in 1920.

<span class="mw-page-title-main">GWR Queen Class</span>

The Queen Class was Joseph Armstrong's last class of 2–2–2 express engine for the Great Western Railway, larger than the Sir Daniel Class of about a decade earlier. They worked express trains for almost 30 years, and were in effect the predecessors of the larger Singles of William Dean.

The 927 Class or Coal Goods was series of 20 0-6-0 freight steam locomotives designed by Joseph Armstrong for the Great Western Railway, and built at Swindon Works in 1874. They were numbered in the series 927–946.

The GWR 439 Class, nicknamed the Bicycle Class because of its unusual appearance, was a series of six 2-4-0 mixed-traffic engines designed by Joseph Armstrong for the Great Western Railway, and built at Swindon Works in 1868. The "Bicycles" worked at Northern Division sheds, running between Wolverhampton and Chester.

Between 1854 when the Shrewsbury and Chester and Shrewsbury and Birmingham Railways were absorbed by the Great Western Railway, and 1864 when he moved south to Swindon Works, Joseph Armstrong occupied the post of the GWR's Locomotive Superintendent, Northern Division, at Wolverhampton Works. For ten years the task of providing new locomotives for the GWR's newly acquired standard gauge lines fell jointly to Armstrong and to his superior Daniel Gooch, the railway's principal Locomotive Superintendent who was based at Paddington.

<span class="mw-page-title-main">GWR 481 Class</span>

The GWR 481 Class was a class of 20 2-4-0 mixed-traffic steam locomotives designed for the Great Western Railway by Joseph Armstrong and built at Swindon Works in 1869. They were similar in size to the 439 Class but differed in appearance, thanks to the flowing lines of their outside frames.

The 806 Class was Joseph Armstrong's last design of 2-4-0 mixed-traffic locomotives for the Great Western Railway, built at Swindon Works in 1873. A further 20 similar locomotives were added by Armstrong's successor William Dean in 1881-2; numbered 2201–2220, these had modern domeless boilers. The class had a similar appearance to the 717 Class but had driving wheels 6 in (152 mm) larger.

<span class="mw-page-title-main">GWR 455 Class</span>

The GWR 455 Class, also called the "Metropolitan" or "Metro" Tanks, was a series of 140 2-4-0T locomotives built for the Great Western Railway, originally for their London suburban services, including running on the underground section of the Metropolitan Railway, the source of their nickname. Later on the class was seen on many other parts of the GWR system. Sixty "Metro" Tanks were built, from 1868 onwards, during the lifetime of their designer, Joseph Armstrong. His successor William Dean regarded the class so highly that he would add a further 80, the final 20 examples appearing as late as 1899. The "Metros" were all built at Swindon Works, in nine lots of ten or 20 engines each.

The 157 Class of 2-2-2 steam locomotives designed in 1878–79 by William Dean was originally regarded as a reconstruction or renewal of Daniel Gooch's own 157 Class of 1862. But, as was often the case, these Dean engines were new, and had more in common with Armstrong's more recent Queen Class, than with the original 157s. The latter had themselves been rebuilds of engines originally built by Sharp, Stewart and Company, which was probably the source of the enduring nickname Sharpies for the new engines. They were also known as Cobhams, after the name carried by No. 162 throughout its life. No. 158 later carried the name Worcester and No. 163 may have been named Beaufort, though this seems uncertain.

<span class="mw-page-title-main">GWR River Class</span>

The 69 Class designed by William Dean for the Great Western Railway consisted of eight 2-4-0 tender locomotives, constructed at Swindon Works between 1895 and 1897. Nominally they were renewals of eight 2-2-2 engines that carried the same numbers, these themselves having been renewals by George Armstrong at Wolverhampton of 2-2-2s designed by Daniel Gooch as long ago as 1855.

The 3001 Class as constructed by William Dean at the Swindon Works of the Great Western Railway in 1891-2 was the culmination of the tradition of GWR 2-2-2 locomotives that had begun with Gooch's North Star over 50 years earlier. The 3001s, which had 7 ft 9 in (2.362 m) driving wheels, were built in two batches:

The 3232 Class, 20 2-4-0 locomotives designed by William Dean and built at Swindon Works for the Great Western Railway in 1892–93, were the GWR's last completely new 2-4-0 design. Their number series was 3232–3251.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.