Perturbation theory (quantum mechanics)

Last updated

In quantum mechanics, perturbation theory is a set of approximation schemes directly related to mathematical perturbation for describing a complicated quantum system in terms of a simpler one. The idea is to start with a simple system for which a mathematical solution is known, and add an additional "perturbing" Hamiltonian representing a weak disturbance to the system. If the disturbance is not too large, the various physical quantities associated with the perturbed system (e.g. its energy levels and eigenstates) can be expressed as "corrections" to those of the simple system. These corrections, being small compared to the size of the quantities themselves, can be calculated using approximate methods such as asymptotic series. The complicated system can therefore be studied based on knowledge of the simpler one. In effect, it is describing a complicated unsolved system using a simple, solvable system.

Contents

Approximate Hamiltonians

Perturbation theory is an important tool for describing real quantum systems, as it turns out to be very difficult to find exact solutions to the Schrödinger equation for Hamiltonians of even moderate complexity. The Hamiltonians to which we know exact solutions, such as the hydrogen atom, the quantum harmonic oscillator and the particle in a box, are too idealized to adequately describe most systems. Using perturbation theory, we can use the known solutions of these simple Hamiltonians to generate solutions for a range of more complicated systems.

Applying perturbation theory

Perturbation theory is applicable if the problem at hand cannot be solved exactly, but can be formulated by adding a "small" term to the mathematical description of the exactly solvable problem.

For example, by adding a perturbative electric potential to the quantum mechanical model of the hydrogen atom, tiny shifts in the spectral lines of hydrogen caused by the presence of an electric field (the Stark effect) can be calculated. This is only approximate because the sum of a Coulomb potential with a linear potential is unstable (has no true bound states) although the tunneling time (decay rate) is very long. This instability shows up as a broadening of the energy spectrum lines, which perturbation theory fails to reproduce entirely.

The expressions produced by perturbation theory are not exact, but they can lead to accurate results as long as the expansion parameter, say α, is very small. Typically, the results are expressed in terms of finite power series in α that seem to converge to the exact values when summed to higher order. After a certain order n ~ 1/α however, the results become increasingly worse since the series are usually divergent (being asymptotic series). There exist ways to convert them into convergent series, which can be evaluated for large-expansion parameters, most efficiently by the variational method. In practice, convergent perturbation expansions often converge slowly while divergent perturbation expansions sometimes give good results, c.f. the exact solution, at lower order. [1]

In the theory of quantum electrodynamics (QED), in which the electronphoton interaction is treated perturbatively, the calculation of the electron's magnetic moment has been found to agree with experiment to eleven decimal places. [2] In QED and other quantum field theories, special calculation techniques known as Feynman diagrams are used to systematically sum the power series terms.

Limitations

Large perturbations

Under some circumstances, perturbation theory is an invalid approach to take. This happens when the system we wish to describe cannot be described by a small perturbation imposed on some simple system. In quantum chromodynamics, for instance, the interaction of quarks with the gluon field cannot be treated perturbatively at low energies because the coupling constant (the expansion parameter) becomes too large, violating the requirement that corrections must be small.

Non-adiabatic states

Perturbation theory also fails to describe states that are not generated adiabatically from the "free model", including bound states and various collective phenomena such as solitons.[ citation needed ] Imagine, for example, that we have a system of free (i.e. non-interacting) particles, to which an attractive interaction is introduced. Depending on the form of the interaction, this may create an entirely new set of eigenstates corresponding to groups of particles bound to one another. An example of this phenomenon may be found in conventional superconductivity, in which the phonon-mediated attraction between conduction electrons leads to the formation of correlated electron pairs known as Cooper pairs. When faced with such systems, one usually turns to other approximation schemes, such as the variational method and the WKB approximation. This is because there is no analogue of a bound particle in the unperturbed model and the energy of a soliton typically goes as the inverse of the expansion parameter. However, if we "integrate" over the solitonic phenomena, the nonperturbative corrections in this case will be tiny; of the order of exp(−1/g) or exp(−1/g2) in the perturbation parameter g. Perturbation theory can only detect solutions "close" to the unperturbed solution, even if there are other solutions for which the perturbative expansion is not valid.[ citation needed ]

Difficult computations

The problem of non-perturbative systems has been somewhat alleviated by the advent of modern computers. It has become practical to obtain numerical non-perturbative solutions for certain problems, using methods such as density functional theory. These advances have been of particular benefit to the field of quantum chemistry. [3] Computers have also been used to carry out perturbation theory calculations to extraordinarily high levels of precision, which has proven important in particle physics for generating theoretical results that can be compared with experiment.

Time-independent perturbation theory

Time-independent perturbation theory is one of two categories of perturbation theory, the other being time-dependent perturbation (see next section). In time-independent perturbation theory, the perturbation Hamiltonian is static (i.e., possesses no time dependence). Time-independent perturbation theory was presented by Erwin Schrödinger in a 1926 paper, [4] shortly after he produced his theories in wave mechanics. In this paper Schrödinger referred to earlier work of Lord Rayleigh, [5] who investigated harmonic vibrations of a string perturbed by small inhomogeneities. This is why this perturbation theory is often referred to as Rayleigh–Schrödinger perturbation theory. [6]

First order corrections

The process begins with an unperturbed Hamiltonian H0, which is assumed to have no time dependence. [7] It has known energy levels and eigenstates, arising from the time-independent Schrödinger equation:

For simplicity, it is assumed that the energies are discrete. The (0) superscripts denote that these quantities are associated with the unperturbed system. Note the use of bra–ket notation.

A perturbation is then introduced to the Hamiltonian. Let V be a Hamiltonian representing a weak physical disturbance, such as a potential energy produced by an external field. Thus, V is formally a Hermitian operator. Let λ be a dimensionless parameter that can take on values ranging continuously from 0 (no perturbation) to 1 (the full perturbation). The perturbed Hamiltonian is:

The energy levels and eigenstates of the perturbed Hamiltonian are again given by the time-independent Schrödinger equation,

The objective is to express En and in terms of the energy levels and eigenstates of the old Hamiltonian. If the perturbation is sufficiently weak, they can be written as a (Maclaurin) power series in λ, where

When k = 0, these reduce to the unperturbed values, which are the first term in each series. Since the perturbation is weak, the energy levels and eigenstates should not deviate too much from their unperturbed values, and the terms should rapidly become smaller as the order is increased.

Substituting the power series expansion into the Schrödinger equation produces:

Expanding this equation and comparing coefficients of each power of λ results in an infinite series of simultaneous equations. The zeroth-order equation is simply the Schrödinger equation for the unperturbed system,

The first-order equation is

Operating through by , the first term on the left-hand side cancels the first term on the right-hand side. (Recall, the unperturbed Hamiltonian is Hermitian). This leads to the first-order energy shift, This is simply the expectation value of the perturbation Hamiltonian while the system is in the unperturbed eigenstate.

This result can be interpreted in the following way: supposing that the perturbation is applied, but the system is kept in the quantum state , which is a valid quantum state though no longer an energy eigenstate. The perturbation causes the average energy of this state to increase by . However, the true energy shift is slightly different, because the perturbed eigenstate is not exactly the same as . These further shifts are given by the second and higher order corrections to the energy.

Before corrections to the energy eigenstate are computed, the issue of normalization must be addressed. Supposing that but perturbation theory also assumes that .

Then at first order in λ, the following must be true:

Since the overall phase is not determined in quantum mechanics, without loss of generality, in time-independent theory it can be assumed that is purely real. Therefore, leading to

To obtain the first-order correction to the energy eigenstate, the expression for the first-order energy correction is inserted back into the result shown above, equating the first-order coefficients of λ. Then by using the resolution of the identity: where the are in the orthogonal complement of , i.e., the other eigenvectors.

The first-order equation may thus be expressed as

Suppose that the zeroth-order energy level is not degenerate, i.e. that there is no eigenstate of H0 in the orthogonal complement of with the energy . After renaming the summation dummy index above as , any can be chosen and multiplying the first-order equation through by gives

The above also gives us the component of the first-order correction along .

Thus, in total, the result is,

The first-order change in the n-th energy eigenket has a contribution from each of the energy eigenstates kn. Each term is proportional to the matrix element , which is a measure of how much the perturbation mixes eigenstate n with eigenstate k; it is also inversely proportional to the energy difference between eigenstates k and n, which means that the perturbation deforms the eigenstate to a greater extent if there are more eigenstates at nearby energies. The expression is singular if any of these states have the same energy as state n, which is why it was assumed that there is no degeneracy. The above formula for the perturbed eigenstates also implies that the perturbation theory can be legitimately used only when the absolute magnitude of the matrix elements of the perturbation is small compared with the corresponding differences in the unperturbed energy levels, i.e.,

Second-order and higher-order corrections

We can find the higher-order deviations by a similar procedure, though the calculations become quite tedious with our current formulation. Our normalization prescription gives that

Up to second order, the expressions for the energies and (normalized) eigenstates are:

If an intermediate normalization is taken (it means, if we require that ), we obtain the same expression for the second-order correction to the wave function, except for the last term.

Extending the process further, the third-order energy correction can be shown to be [8]

Corrections to fifth order (energies) and fourth order (states) in compact notation

If we introduce the notation,

then the energy corrections to fifth order can be written

and the states to fourth order can be written

All terms involved kj should be summed over kj such that the denominator does not vanish.

It is possible to relate the k-th order correction to the energy En to the k-point connected correlation function of the perturbation V in the state . For , one has to consider the inverse Laplace transform of the two-point correlator: where is the perturbing operator V in the interaction picture, evolving in Euclidean time. Then

Similar formulas exist to all orders in perturbation theory, allowing one to express in terms of the inverse Laplace transform of the connected correlation function

To be precise, if we write then the k-th order energy shift is given by [9]

Effects of degeneracy

Suppose that two or more energy eigenstates of the unperturbed Hamiltonian are degenerate. The first-order energy shift is not well defined, since there is no unique way to choose a basis of eigenstates for the unperturbed system. The various eigenstates for a given energy will perturb with different energies, or may well possess no continuous family of perturbations at all.

This is manifested in the calculation of the perturbed eigenstate via the fact that the operator does not have a well-defined inverse.

Let D denote the subspace spanned by these degenerate eigenstates. No matter how small the perturbation is, in the degenerate subspace D the energy differences between the eigenstates of H are non-zero, so complete mixing of at least some of these states is assured. Typically, the eigenvalues will split, and the eigenspaces will become simple (one-dimensional), or at least of smaller dimension than D.

The successful perturbations will not be "small" relative to a poorly chosen basis of D. Instead, we consider the perturbation "small" if the new eigenstate is close to the subspace D. The new Hamiltonian must be diagonalized in D, or a slight variation of D, so to speak. These perturbed eigenstates in D are now the basis for the perturbation expansion,

For the first-order perturbation, we need solve the perturbed Hamiltonian restricted to the degenerate subspace D, simultaneously for all the degenerate eigenstates, where are first-order corrections to the degenerate energy levels, and "small" is a vector of orthogonal to D. This amounts to diagonalizing the matrix

This procedure is approximate, since we neglected states outside the D subspace ("small"). The splitting of degenerate energies is generally observed. Although the splitting may be small, , compared to the range of energies found in the system, it is crucial in understanding certain details, such as spectral lines in Electron Spin Resonance experiments.

Higher-order corrections due to other eigenstates outside D can be found in the same way as for the non-degenerate case,

The operator on the left-hand side is not singular when applied to eigenstates outside D, so we can write but the effect on the degenerate states is of .

Near-degenerate states should also be treated similarly, when the original Hamiltonian splits aren't larger than the perturbation in the near-degenerate subspace. An application is found in the nearly free electron model, where near-degeneracy, treated properly, gives rise to an energy gap even for small perturbations. Other eigenstates will only shift the absolute energy of all near-degenerate states simultaneously.

Degeneracy lifted to first order

Let us consider degenerate energy eigenstates and a perturbation that completely lifts the degeneracy to first order of correction.

The perturbed Hamiltonian is denoted as where is the unperturbed Hamiltonian, is the perturbation operator, and is the parameter of the perturbation.

Let us focus on the degeneracy of the -th unperturbed energy . We will denote the unperturbed states in this degenerate subspace as and the other unperturbed states as , where is the index of the unperturbed state in the degenerate subspace and represents all other energy eigenstates with energies different from . The eventual degeneracy among the other states with does not change our arguments. All states with various values of share the same energy when there is no perturbation, i.e., when . The energies of the other states with are all different from , but not necessarily unique, i.e. not necessarily always different among themselves.

By and , we denote the matrix elements of the perturbation operator in the basis of the unperturbed eigenstates. We assume that the basis vectors in the degenerate subspace are chosen such that the matrix elements are diagonal. Assuming also that the degeneracy is completely lifted to the first order, i.e. that if , we have the following formulae for the energy correction to the second order in and for the state correction to the first order in

Notice that here the first order correction to the state is orthogonal to the unperturbed state,

Generalization to multi-parameter case

The generalization of time-independent perturbation theory to the case where there are multiple small parameters in place of λ can be formulated more systematically using the language of differential geometry, which basically defines the derivatives of the quantum states and calculates the perturbative corrections by taking derivatives iteratively at the unperturbed point.

Hamiltonian and force operator

From the differential geometric point of view, a parameterized Hamiltonian is considered as a function defined on the parameter manifold that maps each particular set of parameters to an Hermitian operator H(xμ) that acts on the Hilbert space. The parameters here can be external field, interaction strength, or driving parameters in the quantum phase transition. Let En(xμ) and be the n-th eigenenergy and eigenstate of H(xμ) respectively. In the language of differential geometry, the states form a vector bundle over the parameter manifold, on which derivatives of these states can be defined. The perturbation theory is to answer the following question: given and at an unperturbed reference point , how to estimate the En(xμ) and at xμ close to that reference point.

Without loss of generality, the coordinate system can be shifted, such that the reference point is set to be the origin. The following linearly parameterized Hamiltonian is frequently used

If the parameters xμ are considered as generalized coordinates, then Fμ should be identified as the generalized force operators related to those coordinates. Different indices μ label the different forces along different directions in the parameter manifold. For example, if xμ denotes the external magnetic field in the μ-direction, then Fμ should be the magnetization in the same direction.

Perturbation theory as power series expansion

The validity of perturbation theory lies on the adiabatic assumption, which assumes the eigenenergies and eigenstates of the Hamiltonian are smooth functions of parameters such that their values in the vicinity region can be calculated in power series (like Taylor expansion) of the parameters:

Here μ denotes the derivative with respect to xμ. When applying to the state , it should be understood as the covariant derivative if the vector bundle is equipped with non-vanishing connection. All the terms on the right-hand-side of the series are evaluated at xμ = 0, e.g. EnEn(0) and . This convention will be adopted throughout this subsection, that all functions without the parameter dependence explicitly stated are assumed to be evaluated at the origin. The power series may converge slowly or even not converge when the energy levels are close to each other. The adiabatic assumption breaks down when there is energy level degeneracy, and hence the perturbation theory is not applicable in that case.

Hellmann–Feynman theorems

The above power series expansion can be readily evaluated if there is a systematic approach to calculate the derivates to any order. Using the chain rule, the derivatives can be broken down to the single derivative on either the energy or the state. The Hellmann–Feynman theorems are used to calculate these single derivatives. The first Hellmann–Feynman theorem gives the derivative of the energy,

The second Hellmann–Feynman theorem gives the derivative of the state (resolved by the complete basis with mn),

For the linearly parameterized Hamiltonian, μH simply stands for the generalized force operator Fμ.

The theorems can be simply derived by applying the differential operator μ to both sides of the Schrödinger equation which reads

Then overlap with the state from left and make use of the Schrödinger equation again,

Given that the eigenstates of the Hamiltonian always form an orthonormal basis , the cases of m = n and mn can be discussed separately. The first case will lead to the first theorem and the second case to the second theorem, which can be shown immediately by rearranging the terms. With the differential rules given by the Hellmann–Feynman theorems, the perturbative correction to the energies and states can be calculated systematically.

Correction of energy and state

To the second order, the energy correction reads

where denotes the real part function. The first order derivative μEn is given by the first Hellmann–Feynman theorem directly. To obtain the second order derivative μνEn, simply applying the differential operator μ to the result of the first order derivative , which reads

Note that for a linearly parameterized Hamiltonian, there is no second derivative μνH = 0 on the operator level. Resolve the derivative of state by inserting the complete set of basis, then all parts can be calculated using the Hellmann–Feynman theorems. In terms of Lie derivatives, according to the definition of the connection for the vector bundle. Therefore, the case m = n can be excluded from the summation, which avoids the singularity of the energy denominator. The same procedure can be carried on for higher order derivatives, from which higher order corrections are obtained.

The same computational scheme is applicable for the correction of states. The result to the second order is as follows

Both energy derivatives and state derivatives will be involved in deduction. Whenever a state derivative is encountered, resolve it by inserting the complete set of basis, then the Hellmann-Feynman theorem is applicable. Because differentiation can be calculated systematically, the series expansion approach to the perturbative corrections can be coded on computers with symbolic processing software like Mathematica.

Effective Hamiltonian

Let H(0) be the Hamiltonian completely restricted either in the low-energy subspace or in the high-energy subspace , such that there is no matrix element in H(0) connecting the low- and the high-energy subspaces, i.e. if . Let Fμ = ∂μH be the coupling terms connecting the subspaces. Then when the high energy degrees of freedoms are integrated out, the effective Hamiltonian in the low energy subspace reads [10]

Here are restricted in the low energy subspace. The above result can be derived by power series expansion of .

In a formal way it is possible to define an effective Hamiltonian that gives exactly the low-lying energy states and wavefunctions. [11] In practice, some kind of approximation (perturbation theory) is generally required.

Time-dependent perturbation theory

Method of variation of constants

Time-dependent perturbation theory, initiated by Paul Dirac and further developed by John Archibald Wheeler, Richard Feynman, and Freeman Dyson, [12] studies the effect of a time-dependent perturbation V(t) applied to a time-independent Hamiltonian H0. [13] It is an extremely valuable tool for calculating the properties of any physical system. It is used for the quantitative description of phenomena as diverse as proton-proton scattering, photo-ionization of materials, scattering of electrons off lattice defects in a conductor, scattering of neutrons off nuclei, electric susceptibilities of materials, neutron absorption cross sections in a nuclear reactor, and much more. [12]

Since the perturbed Hamiltonian is time-dependent, so are its energy levels and eigenstates. Thus, the goals of time-dependent perturbation theory are slightly different from time-independent perturbation theory. One is interested in the following quantities:

The first quantity is important because it gives rise to the classical result of an A measurement performed on a macroscopic number of copies of the perturbed system. For example, we could take A to be the displacement in the x-direction of the electron in a hydrogen atom, in which case the expected value, when multiplied by an appropriate coefficient, gives the time-dependent dielectric polarization of a hydrogen gas. With an appropriate choice of perturbation (i.e. an oscillating electric potential), this allows one to calculate the AC permittivity of the gas.

The second quantity looks at the time-dependent probability of occupation for each eigenstate. This is particularly useful in laser physics, where one is interested in the populations of different atomic states in a gas when a time-dependent electric field is applied. These probabilities are also useful for calculating the "quantum broadening" of spectral lines (see line broadening) and particle decay in particle physics and nuclear physics.

We will briefly examine the method behind Dirac's formulation of time-dependent perturbation theory. Choose an energy basis for the unperturbed system. (We drop the (0) superscripts for the eigenstates, because it is not useful to speak of energy levels and eigenstates for the perturbed system.)

If the unperturbed system is an eigenstate (of the Hamiltonian) at time t = 0, its state at subsequent times varies only by a phase (in the Schrödinger picture, where state vectors evolve in time and operators are constant),

Now, introduce a time-dependent perturbing Hamiltonian V(t). The Hamiltonian of the perturbed system is Let denote the quantum state of the perturbed system at time t. It obeys the time-dependent Schrödinger equation,

The quantum state at each instant can be expressed as a linear combination of the complete eigenbasis of :

where the cn(t)s are to be determined complex functions of t which we will refer to as amplitudes (strictly speaking, they are the amplitudes in the Dirac picture).

We have explicitly extracted the exponential phase factors on the right hand side. This is only a matter of convention, and may be done without loss of generality. The reason we go to this trouble is that when the system starts in the state and no perturbation is present, the amplitudes have the convenient property that, for all t, cj(t) = 1 and cn(t) = 0 if n ≠ j.

The square of the absolute amplitude cn(t) is the probability that the system is in state n at time t, since

Plugging into the Schrödinger equation and using the fact that ∂/∂t acts by a product rule, one obtains

By resolving the identity in front of V and multiplying through by the bra on the left, this can be reduced to a set of coupled differential equations for the amplitudes,

where we have used equation ( 1 ) to evaluate the sum on n in the second term, then used the fact that .

The matrix elements of V play a similar role as in time-independent perturbation theory, being proportional to the rate at which amplitudes are shifted between states. Note, however, that the direction of the shift is modified by the exponential phase factor. Over times much longer than the energy difference EkEn, the phase winds around 0 several times. If the time-dependence of V is sufficiently slow, this may cause the state amplitudes to oscillate. (For example, such oscillations are useful for managing radiative transitions in a laser.)

Up to this point, we have made no approximations, so this set of differential equations is exact. By supplying appropriate initial values cn(t), we could in principle find an exact (i.e., non-perturbative) solution. This is easily done when there are only two energy levels (n = 1, 2), and this solution is useful for modelling systems like the ammonia molecule.

However, exact solutions are difficult to find when there are many energy levels, and one instead looks for perturbative solutions. These may be obtained by expressing the equations in an integral form,

Repeatedly substituting this expression for cn back into right hand side, yields an iterative solution, where, for example, the first-order term is To the same approximation, the summation in the above expression can be removed since in the unperturbed state so that we have

Several further results follow from this, such as Fermi's golden rule, which relates the rate of transitions between quantum states to the density of states at particular energies; or the Dyson series, obtained by applying the iterative method to the time evolution operator, which is one of the starting points for the method of Feynman diagrams.

Method of Dyson series

Time-dependent perturbations can be reorganized through the technique of the Dyson series. The Schrödinger equation has the formal solution where T is the time ordering operator, Thus, the exponential represents the following Dyson series, Note that in the second term, the 1/2! factor exactly cancels the double contribution due to the time-ordering operator, etc.

Consider the following perturbation problem assuming that the parameter λ is small and that the problem has been solved.

Perform the following unitary transformation to the interaction picture (or Dirac picture), Consequently, the Schrödinger equation simplifies to so it is solved through the above Dyson series, as a perturbation series with small λ.

Using the solution of the unperturbed problem and (for the sake of simplicity assume a pure discrete spectrum), yields, to first order,

Thus, the system, initially in the unperturbed state , by dint of the perturbation can go into the state . The corresponding transition probability amplitude to first order is as detailed in the previous section——while the corresponding transition probability to a continuum is furnished by Fermi's golden rule.

As an aside, note that time-independent perturbation theory is also organized inside this time-dependent perturbation theory Dyson series. To see this, write the unitary evolution operator, obtained from the above Dyson series, as and take the perturbation V to be time-independent.

Using the identity resolution with for a pure discrete spectrum, write

It is evident that, at second order, one must sum on all the intermediate states. Assume and the asymptotic limit of larger times. This means that, at each contribution of the perturbation series, one has to add a multiplicative factor in the integrands for ε arbitrarily small. Thus the limit t → ∞ gives back the final state of the system by eliminating all oscillating terms, but keeping the secular ones. The integrals are thus computable, and, separating the diagonal terms from the others yields where the time secular series yields the eigenvalues of the perturbed problem specified above, recursively; whereas the remaining time-constant part yields the corrections to the stationary eigenfunctions also given above (.)

The unitary evolution operator is applicable to arbitrary eigenstates of the unperturbed problem and, in this case, yields a secular series that holds at small times.

Strong perturbation theory

In a similar way as for small perturbations, it is possible to develop a strong perturbation theory. Consider as usual the Schrödinger equation

and we consider the question if a dual Dyson series exists that applies in the limit of a perturbation increasingly large. This question can be answered in an affirmative way [14] and the series is the well-known adiabatic series. [15] This approach is quite general and can be shown in the following way. Consider the perturbation problem

being λ→ ∞. Our aim is to find a solution in the form

but a direct substitution into the above equation fails to produce useful results. This situation can be adjusted making a rescaling of the time variable as producing the following meaningful equations

that can be solved once we know the solution of the leading order equation. But we know that in this case we can use the adiabatic approximation. When does not depend on time one gets the Wigner-Kirkwood series that is often used in statistical mechanics. Indeed, in this case we introduce the unitary transformation

that defines a free picture as we are trying to eliminate the interaction term. Now, in dual way with respect to the small perturbations, we have to solve the Schrödinger equation

and we see that the expansion parameter λ appears only into the exponential and so, the corresponding Dyson series, a dual Dyson series, is meaningful at large λs and is

After the rescaling in time we can see that this is indeed a series in justifying in this way the name of dual Dyson series. The reason is that we have obtained this series simply interchanging H0 and V and we can go from one to another applying this exchange. This is called duality principle in perturbation theory. The choice yields, as already said, a Wigner-Kirkwood series that is a gradient expansion. The Wigner-Kirkwood series is a semiclassical series with eigenvalues given exactly as for WKB approximation. [16]

Examples

Example of first-order perturbation theory – ground-state energy of the quartic oscillator

Consider the quantum harmonic oscillator with the quartic potential perturbation and the Hamiltonian

The ground state of the harmonic oscillator is (), and the energy of unperturbed ground state is

Using the first-order correction formula, we get or

Example of first- and second-order perturbation theory – quantum pendulum

Consider the quantum-mathematical pendulum with the Hamiltonian with the potential energy taken as the perturbation i.e.

The unperturbed normalized quantum wave functions are those of the rigid rotor and are given by and the energies

The first-order energy correction to the rotor due to the potential energy is

Using the formula for the second-order correction, one gets or or

Potential energy as a perturbation

When the unperturbed state is a free motion of a particle with kinetic energy , the solution of the Schrödinger equation corresponds to plane waves with wavenumber . If there is a weak potential energy present in the space, in the first approximation, the perturbed state is described by the equation whose particular integral is [17] where . In the two-dimensional case, the solution is where and is the Hankel function of the first kind. In the one-dimensional case, the solution is where .

Applications

Related Research Articles

<span class="mw-page-title-main">Feynman diagram</span> Pictorial representation of the behavior of subatomic particles

In theoretical physics, a Feynman diagram is a pictorial representation of the mathematical expressions describing the behavior and interaction of subatomic particles. The scheme is named after American physicist Richard Feynman, who introduced the diagrams in 1948. The interaction of subatomic particles can be complex and difficult to understand; Feynman diagrams give a simple visualization of what would otherwise be an arcane and abstract formula. According to David Kaiser, "Since the middle of the 20th century, theoretical physicists have increasingly turned to this tool to help them undertake critical calculations. Feynman diagrams have revolutionized nearly every aspect of theoretical physics." While the diagrams are applied primarily to quantum field theory, they can also be used in other areas of physics, such as solid-state theory. Frank Wilczek wrote that the calculations that won him the 2004 Nobel Prize in Physics "would have been literally unthinkable without Feynman diagrams, as would [Wilczek's] calculations that established a route to production and observation of the Higgs particle."

In quantum mechanics, the Hamiltonian of a system is an operator corresponding to the total energy of that system, including both kinetic energy and potential energy. Its spectrum, the system's energy spectrum or its set of energy eigenvalues, is the set of possible outcomes obtainable from a measurement of the system's total energy. Due to its close relation to the energy spectrum and time-evolution of a system, it is of fundamental importance in most formulations of quantum theory.

<span class="mw-page-title-main">Schrödinger equation</span> Description of a quantum-mechanical system

The Schrödinger equation is a partial differential equation that governs the wave function of a non-relativistic quantum-mechanical system. Its discovery was a significant landmark in the development of quantum mechanics. It is named after Erwin Schrödinger, who postulated the equation in 1925 and published it in 1926, forming the basis for the work that resulted in his Nobel Prize in Physics in 1933.

In mathematics, a self-adjoint operator on a complex vector space V with inner product is a linear map A that is its own adjoint. If V is finite-dimensional with a given orthonormal basis, this is equivalent to the condition that the matrix of A is a Hermitian matrix, i.e., equal to its conjugate transpose A. By the finite-dimensional spectral theorem, V has an orthonormal basis such that the matrix of A relative to this basis is a diagonal matrix with entries in the real numbers. This article deals with applying generalizations of this concept to operators on Hilbert spaces of arbitrary dimension.

<span class="mw-page-title-main">Bloch's theorem</span> Fundamental theorem in condensed matter physics

In condensed matter physics, Bloch's theorem states that solutions to the Schrödinger equation in a periodic potential can be expressed as plane waves modulated by periodic functions. The theorem is named after the Swiss physicist Felix Bloch, who discovered the theorem in 1929. Mathematically, they are written

<span class="mw-page-title-main">Fine structure</span> Details in the emission spectrum of an atom

In atomic physics, the fine structure describes the splitting of the spectral lines of atoms due to electron spin and relativistic corrections to the non-relativistic Schrödinger equation. It was first measured precisely for the hydrogen atom by Albert A. Michelson and Edward W. Morley in 1887, laying the basis for the theoretical treatment by Arnold Sommerfeld, introducing the fine-structure constant.

In physics, the S-matrix or scattering matrix relates the initial state and the final state of a physical system undergoing a scattering process. It is used in quantum mechanics, scattering theory and quantum field theory (QFT).

In quantum mechanics, the canonical commutation relation is the fundamental relation between canonical conjugate quantities. For example,

<span class="mw-page-title-main">Schwinger–Dyson equation</span> Equations for correlation functions in QFT

The Schwinger–Dyson equations (SDEs) or Dyson–Schwinger equations, named after Julian Schwinger and Freeman Dyson, are general relations between correlation functions in quantum field theories (QFTs). They are also referred to as the Euler–Lagrange equations of quantum field theories, since they are the equations of motion corresponding to the Green's function. They form a set of infinitely many functional differential equations, all coupled to each other, sometimes referred to as the infinite tower of SDEs.

The adiabatic theorem is a concept in quantum mechanics. Its original form, due to Max Born and Vladimir Fock (1928), was stated as follows:

In quantum mechanics, a rotational transition is an abrupt change in angular momentum. Like all other properties of a quantum particle, angular momentum is quantized, meaning it can only equal certain discrete values, which correspond to different rotational energy states. When a particle loses angular momentum, it is said to have transitioned to a lower rotational energy state. Likewise, when a particle gains angular momentum, a positive rotational transition is said to have occurred.

<span class="mw-page-title-main">Two-state quantum system</span> Simple quantum mechanical system

In quantum mechanics, a two-state system is a quantum system that can exist in any quantum superposition of two independent quantum states. The Hilbert space describing such a system is two-dimensional. Therefore, a complete basis spanning the space will consist of two independent states. Any two-state system can also be seen as a qubit.

In quantum mechanics, the Hellmann–Feynman theorem relates the derivative of the total energy with respect to a parameter to the expectation value of the derivative of the Hamiltonian with respect to that same parameter. According to the theorem, once the spatial distribution of the electrons has been determined by solving the Schrödinger equation, all the forces in the system can be calculated using classical electrostatics.

In particle physics, neutral particle oscillation is the transmutation of a particle with zero electric charge into another neutral particle due to a change of a non-zero internal quantum number, via an interaction that does not conserve that quantum number. Neutral particle oscillations were first investigated in 1954 by Murray Gell-mann and Abraham Pais.

<span class="mw-page-title-main">Degenerate energy levels</span> Energy level of a quantum system that corresponds to two or more different measurable states

In quantum mechanics, an energy level is degenerate if it corresponds to two or more different measurable states of a quantum system. Conversely, two or more different states of a quantum mechanical system are said to be degenerate if they give the same value of energy upon measurement. The number of different states corresponding to a particular energy level is known as the degree of degeneracy of the level. It is represented mathematically by the Hamiltonian for the system having more than one linearly independent eigenstate with the same energy eigenvalue. When this is the case, energy alone is not enough to characterize what state the system is in, and other quantum numbers are needed to characterize the exact state when distinction is desired. In classical mechanics, this can be understood in terms of different possible trajectories corresponding to the same energy.

<span class="mw-page-title-main">Jaynes–Cummings model</span> Model in quantum optics

The Jaynes–Cummings model is a theoretical model in quantum optics. It describes the system of a two-level atom interacting with a quantized mode of an optical cavity, with or without the presence of light. It was originally developed to study the interaction of atoms with the quantized electromagnetic field in order to investigate the phenomena of spontaneous emission and absorption of photons in a cavity.

In quantum mechanics and quantum field theory, a Schrödinger field, named after Erwin Schrödinger, is a quantum field which obeys the Schrödinger equation. While any situation described by a Schrödinger field can also be described by a many-body Schrödinger equation for identical particles, the field theory is more suitable for situations where the particle number changes.

In linear algebra, a raising or lowering operator is an operator that increases or decreases the eigenvalue of another operator. In quantum mechanics, the raising operator is sometimes called the creation operator, and the lowering operator the annihilation operator. Well-known applications of ladder operators in quantum mechanics are in the formalisms of the quantum harmonic oscillator and angular momentum.

The Koopman–von Neumann (KvN) theory is a description of classical mechanics as an operatorial theory similar to quantum mechanics, based on a Hilbert space of complex, square-integrable wavefunctions. As its name suggests, the KvN theory is loosely related to work by Bernard Koopman and John von Neumann in 1931 and 1932, respectively. As explained in this entry, however, the historical origins of the theory and its name are complicated.

In physics, particularly in quantum perturbation theory, the matrix element refers to the linear operator of a modified Hamiltonian using Dirac notation. It is in fact referring to the matrix elements of a Hamiltonian operator which serves the purpose of calculating transition probabilities between different quantum states.

References

  1. Simon, Barry (1982). "Large orders and summability of eigenvalue perturbation theory: A mathematical overview". International Journal of Quantum Chemistry. 21: 3–25. doi:10.1002/qua.560210103.
  2. Aoyama, Tatsumi; Hayakawa, Masashi; Kinoshita, Toichiro; Nio, Makiko (2012). "Tenth-order QED lepton anomalous magnetic moment: Eighth-order vertices containing a second-order vacuum polarization". Physical Review D. 85 (3): 033007. arXiv: 1110.2826 . Bibcode:2012PhRvD..85c3007A. doi:10.1103/PhysRevD.85.033007. S2CID   119279420.
  3. van Mourik, T.; Buhl, M.; Gaigeot, M.-P. (10 February 2014). "Density functional theory across chemistry, physics and biology". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 372 (2011): 20120488. Bibcode:2014RSPTA.37220488V. doi:10.1098/rsta.2012.0488. PMC   3928866 . PMID   24516181.
  4. Schrödinger, E. (1926). "Quantisierung als Eigenwertproblem" [Quantization as an eigenvalue problem]. Annalen der Physik (in German). 80 (13): 437–490. Bibcode:1926AnP...385..437S. doi:10.1002/andp.19263851302.
  5. Rayleigh, J. W. S. (1894). Theory of Sound. Vol. I (2nd ed.). London: Macmillan. pp. 115–118. ISBN   978-1-152-06023-4.
  6. Sulejmanpasic, Tin; Ünsal, Mithat (2018-07-01). "Aspects of perturbation theory in quantum mechanics: The BenderWuMathematica® package". Computer Physics Communications. 228: 273–289. Bibcode:2018CoPhC.228..273S. doi: 10.1016/j.cpc.2017.11.018 . ISSN   0010-4655. S2CID   46923647.
  7. Sakurai, J.J., and Napolitano, J. (1964,2011). Modern Quantum Mechanics (2nd ed.), Addison Wesley ISBN   978-0-8053-8291-4. Chapter 5
  8. Landau, L. D.; Lifschitz, E. M. (1977). Quantum Mechanics: Non-relativistic Theory (3rd ed.). Pergamon Press. ISBN   978-0-08-019012-9.
  9. Hogervorst M, Meineri M, Penedones J, Salehi Vaziri K (2021). "Hamiltonian truncation in Anti-de Sitter spacetime". Journal of High Energy Physics. 2021 (8): 63. arXiv: 2104.10689 . Bibcode:2021JHEP...08..063H. doi:10.1007/JHEP08(2021)063. S2CID   233346724.
  10. Bir, Gennadiĭ Levikovich; Pikus, Grigoriĭ Ezekielevich (1974). "Chapter 15: Perturbation theory for the degenerate case". Symmetry and Strain-induced Effects in Semiconductors. Wiley. ISBN   978-0-470-07321-6.
  11. Soliverez, Carlos E. (1981). "General Theory of Effective Hamiltonians". Physical Review A. 24 (1): 4–9. Bibcode:1981PhRvA..24....4S. doi:10.1103/PhysRevA.24.4 via Academia.Edu.
  12. 1 2 Dick, Rainer (2020), Dick, Rainer (ed.), "Time-Dependent Perturbations in Quantum Mechanics", Advanced Quantum Mechanics: Materials and Photons, Graduate Texts in Physics, Cham: Springer International Publishing, pp. 265–310, doi:10.1007/978-3-030-57870-1_13, ISBN   978-3-030-57870-1 , retrieved 2023-10-24
  13. Albert Messiah (1966). Quantum Mechanics, North Holland, John Wiley & Sons. ISBN   0486409244; J. J. Sakurai (1994). Modern Quantum Mechanics (Addison-Wesley) ISBN   9780201539295.
  14. Frasca, M. (1998). "Duality in Perturbation Theory and the Quantum Adiabatic Approximation". Physical Review A. 58 (5): 3439–3442. arXiv: hep-th/9801069 . Bibcode:1998PhRvA..58.3439F. doi:10.1103/PhysRevA.58.3439. S2CID   2699775.
  15. Mostafazadeh, A. (1997). "Quantum adiabatic approximation and the geometric phase". Physical Review A. 55 (3): 1653–1664. arXiv: hep-th/9606053 . Bibcode:1997PhRvA..55.1653M. doi:10.1103/PhysRevA.55.1653. S2CID   17059815.
  16. Frasca, Marco (2007). "A strongly perturbed quantum system is a semiclassical system". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 463 (2085): 2195–2200. arXiv: hep-th/0603182 . Bibcode:2007RSPSA.463.2195F. doi:10.1098/rspa.2007.1879. S2CID   19783654.
  17. Lifshitz, E. M., & LD and Sykes Landau (JB). (1965). Quantum Mechanics; Non-relativistic Theory. Pergamon Press.