 | This article needs additional citations for verification .(September 2020) |
| Queensland Railways DL class | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 DL1 at the Workshops Rail Museum, North Ipswich in October 2011 | |||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
The DL class is a class of diesel locomotives built by Queensland Railways, Robert Stephenson and Hawthorns and Walkers Limited for Queensland Railways between 1939 and 1961.
The DL class provided the first diesel locomotive in service in Queensland, DL 1 being built to provide a light weight (maximum 6-long-ton or 6.1-tonne or 6.7-short-ton axle load) locomotive for the Mt Surprise – Forsayth section of the line from Mareeba, which since cyclonic rainfall in 1927 severely damaged the line, had only been able to support a rail motor hauling 1 or 2 goods wagons. [1] DL1 was built by Queensland Railways in 1939, initially with C wheel arrangement but after rough riding during trials around Brisbane it was returned to the workshops and fitted with a pony wheel. [2]
DL2 was built by Robert Stephenson and Hawthorns in 1954 and the final two were built by Walkers Limited in 1961 and these locomotives were fitted with Multiple Unit capability with other members of the class. Similar equipment was fitted to DL1 and DL2 at Cairns in 1960. They were initially used exclusively west of Mt Surprise on the lightly trafficked line to Forsayth. [1] [3] When traffic on that line grew to the point where upgrading it to 10-long-ton or 10.2-tonne or 11.2-short-ton axle load was justified in 1968, the DL class was replaced by the 1720 class. In 1974, DL2 returned to the Mt Surprise – Forsayth line temporarily due to flood damage.
Initially the DLs were replaced by DH locos beyond Almaden. As the line was upgraded the 1720 could then go to MT Surprise and hauled 2 DHs as vehicles to Mt Surprise from where the DHs took the train on to Forsayth and return The 1720 lay over at MT. Surprise meanwhile..As there were two trains per week the 2 DHs waited at Mt Surprize to take out the second train to Forsayth train a couple of days later. On their return to Mt Surprise they were shut down and hauled back to Cairns.When the upgrade to Forsayth was complete the 1720s went all the way and the DHs were no longer needed. The 4 locos were then used as shunters at various locations down south. DL2 and DL4 to Townsville, and DL1 and DL3 to Ipswich Workshops. * DL 1 was sent to Wallangarra in January 1972. The open cab didn’t go over all that well with crews in winter.
DL 1 was modified and returned to Wallangarra in August 1972. December 1976 it became the Ipswich Workshops shunter.
All four locos were condemned in 1987, three were still operating in 1993. DL 1 was retained for QR Museum at Ipswich.
The latter two were modified for cold climate duty, DL1 receiving the most extensive cab modifications. DL1 and DL3 continued in use until 1987, with DL2 and DL4 being withdrawn from shunting duties at around the same time. DL4 was subsequently renovated using parts of DL2 and was sent to Normanton in 1988 as a backup locomotive for the Gulflander on the Normanton to Croydon line, a role it still fulfils to this day, [4] while DL2 was donated to the township of Forsayth for plinting undercover in a park. DL1 was retained by QR as part of its historical collection, while DL3 was preserved by the ARHS for use at the Rosewood Railway Museum. [5]
Three of the class were withdrawn in 1988–1989 and have been preserved. [5] DL4 remains in service with Queensland Rail as a backup locomotive for the Gulflander on the Normanton to Croydon line. [4]
The DL class were mostly maintained at Cairns, but occasionally made trips to Ipswich Workshops for heavy overhaul, a practice that is still carried out by DL4 to this day. They were trailed on goods trains as part of the long distance transfers.
DL2 and DL4 were used for shunting in the Townsville North yard and at Ayr, and often rotated between these locations.
DL3 was sent from Ipswich Workshops to Wallangarra for shunting in 1972 but returned after 7 months as it was unsuitable for the cold climate. As a result, DL1 was modified with an enclosed cab, heaters, a shunters refuge on the rear of the cab etc. and subsequently worked there from August 1972 to December 1976. DL3 was fitted with and enclosed cab (to a different design) at Ipswich in July 1975.
In 1999, the DL4 was overhauled at the Redbank workshops and returned to Normanton in 2000. Since then, it has performed essential shunting activities in Normanton and Croydon yards and has railed maintenance materials for the local track gang.
In late 2019, DL4 received an overhaul with its wheelsets and motion refurbished, overhauled compressor, new pony axle, new wheel bearings all round, re-machined tyres, re-machined crankpins and new crankpin bushes. All the work that cannot be serviced in Normanton. It returned to Normanton in December and did a test run. Some adjustments were made by the local Normanton crew on the suspension to correct some binding in the driver's side jackshaft crankpin.
| Number | Name | Builder | Serial number | In service | Withdrawn | Notes |
|---|---|---|---|---|---|---|
| DL1 | Etheridge | Queensland Railways | 6 November 1939 | 13 February 1989 | Preserved, Queensland Rail Heritage Division, on display at Workshops Rail Museum, North Ipswich | |
| DL2 | Forsayth | Robert Stephenson and Hawthorns | 7747/2481 | 14 May 1954 | 15 May 1989 | Static display at Forsayth |
| DL3 | Mt Surprise | Walkers Limited | 571 | 23 June 1961 | 18 January 1988 | Preserved operational, Australian Railway Historical Society, Rosewood Railway Museum |
| DL4 | Almaden | Walkers Limited | 572 | 30 June 1961 | Operational with Queensland Rail |
A switcher locomotive, shunter locomotive, or shifter locomotive is a locomotive used for maneuvering railway vehicles over short distances. Switchers do not usually move trains over long distances. Instead, they typically assemble trains in order for another locomotive to take over. Switchers often operate in a railyard or make short transfer runs. They may serve as the primary motive power on short branch lines or switching and terminal railroads.
The British Rail Class 03 locomotive was, together with the similar Class 04, one of British Railways' most successful 0-6-0 diesel-mechanical shunters. 230 were built at Doncaster and Swindon works between 1957 and 1962, and were numbered D2000–D2199 and D2370–D2399. D2370 and D2371 were used as departmental locomotives and originally numbered 91 and 92 respectively.
The British Rail Class 04 is a 0-6-0 diesel-mechanical shunting locomotive class, built between 1952 and 1962 and was the basis for the later Class 03 built in the British Railways workshops.
The British Rail Class 12 is a diesel locomotive built primarily for shunting duties around London.
The London and South Western Railway B4 class is a class of 0-4-0 tank engines originally designed for station piloting and dock shunting. They were later used extensively in Southampton Docks for nearly half a century.
The New Zealand F class was the first important class of steam locomotive built to operate on New Zealand's railway network after the national gauge of 3 ft 6 in was adopted. The first locomotives built for the new gauge railways were two E class double Fairlies for the Dunedin and Port Chalmers Railway Company. The F class was the first class ordered by the central government, and between 1872 and 1888, a total of eighty-eight members of the class were constructed.
The NZR C class consisted of twenty-four steam locomotives built to perform shunting duties on New Zealand's national rail network. It is sometimes known as the big C class to differentiate it from the C class of 1873.
The New Zealand DH class locomotive is a type of diesel-electric heavy transfer and shunting locomotive in New Zealand's national railway network. The class consists of six heavy shunt U10B type locomotives built by General Electric United States at their Erie, Pennsylvania plant in 1978. Five of the class are used in the Auckland area for heavy shunting duties, including services around Auckland and the Port of Auckland, while one is based at the Port of Tauranga in Mount Maunganui.
The New Zealand DA class locomotive were a class of diesel-electric mainline locomotives operated on the New Zealand railway system between 1955 and 1989. Consisting of 146 locomotives, it was the most numerous class to ever operate in New Zealand, with five more than the AB class steam locomotive.
The rail network in Queensland, Australia, was the first in the world to adopt 1,067 mm narrow gauge for a main line, and, in 2013, was claimed to the second largest narrow gauge network in the world, consists of:
The Addington Railway Workshops was a major railway workshops established in the Christchurch suburb of Addington in 1877 by the Public Works Department, and transferred in 1880 to the newly formed New Zealand Railways Department (NZR). The workshops closed in 1990.
The New Zealand DSC class locomotive is a heavy shunting locomotive used throughout New Zealand. The class was built in seven batches, the first 18 locomotives being built by British Thomson-Houston of the United Kingdom, with the further 52 locomotives being built by New Zealand Railways (NZR).
The Gulflander is a passenger train operated by Queensland Rail on the isolated Normanton to Croydon line in the Gulf Country of northern Queensland, Australia.
The 70 class were a class of diesel-hydraulic locomotives built by Commonwealth Engineering, Granville for the New South Wales Department of Railways in 1960–61. They were ordered to replace steam locomotives at Port Kembla.
The Queensland Railways C17 class locomotive are a class of 4-8-0 steam locomotives operated by the Queensland Railways.
The Queensland Railways A10 Neilson class locomotive was a class of 0-4-2 steam locomotives operated by the Queensland Railways.
The Queensland Railways C16 class locomotive is a class of 4-8-0 steam locomotives that was operated by the Queensland Railways.
The 1460 class was a class of diesel locomotives built by Clyde Engineering, Eagle Farm for Queensland Railways between 1964 and 1966.
The Normanton to Croydon railway line is a heritage-listed railway line in the Gulf Country of northern Queensland, Australia. The railway line linking Normanton in the Shire of Carpentaria to Croydon in the Shire of Croydon was built between 1888 and 1891 and is the last isolated line of Queensland Rail still in use. It utilises an innovative system of submersible track with patented steel sleepers and retains buildings of considerable architectural and technical interest at its terminus in Normanton. The only train to operate on the line is the weekly Gulflander service operated by a Gardner diesel propelled railmotor and carriages TP1809 and TP1811.
The Queensland Railways 6D11½ class locomotive was a class of 0-6-0 steam trams operated by the Queensland Railways.