Queensland AC16 class locomotive

Last updated

Queensland Railways AC16 class
AC16 221A Ipswich Workshops.jpg
AC16 221A pictured outside the Ipswich Railway Workshops
Type and origin
Power typeSteam
Builder Baldwin Locomotive Works
Serial number69451-69470
Model USATC S118 Class
Build date1943
Total produced20
Specifications
Configuration:
   Whyte 2-8-2
Gauge 1,067 mm (3 ft 6 in)
Leading dia. 2 ft 2 in (660 mm)
Driver dia.4 ft 0 in (1,219 mm)
Trailing dia. 2 ft 6 in (762 mm)
Length59 ft 5+12 in (18.12 m)
Adhesive weight 80,000 lb (36,300 kg)
Loco weight119,000 lb (54,000 kg)
Fuel typeCoal
Firebox:
  Grate area27.7 sq ft (2.57 m2)
Boiler pressure185 lbf/in2 (1,276 kPa)
Heating surface:
  Firebox115 sq ft (10.7 m2)
  Tubes and flues1,256 sq ft (116.7 m2)
Superheater:
  Heating area347 sq ft (32.2 m2)
Cylinders 2 outside
Cylinder size 16 in × 24 in (406 mm × 610 mm)
Valve gear Walschaerts
Performance figures
Tractive effort 20,128 lbf (89.53 kN)
Career
Operators Queensland Railways
Numbers216A-235A
NicknamesYank
Preserved218A, 221A
Disposition2 preserved, 18 scrapped

The Queensland Railways AC16 class locomotive was a class of 2-8-2 steam locomotives operated by the Queensland Railways.

Contents

History

World War II and the occupation by Japanese forces of Pacific Islands and islands to the north of Australia saw Queensland placed under the threat of imminent attack. This placed a great strain on Queensland Railway's resources in the movement of wartime supplies and troops.

A request was made in 1941 for further, new C17 class locomotives and the specifications were forwarded to the United States where the United States Army Transportation Corps (USATC) drew up plans for a 2-8-2 with specifications similar to a C17 class, which became the USATC S118 Class. These locomotives were intended as a standard design for use on narrow gauge railways in other parts of the world as a wartime measure. Thus twenty engines obtained from the United States under Lend-Lease arrangements and later purchased. They were the only ones of their type to come to Australia out of a total of 741 similar engines built for USATC. They were unloaded in Sydney in 1943 and railed to Brisbane for assembly. [1] [2] [3] [4]

Per Queensland Railway's classification system they were designated the AC16 class, C representing they had four driving axles, and the 16 the cylinder diameter in inches. Because the classification was already being used by an existing class they were designated American C16, i.e. AC16. The American steam locomotive earned it the nickname of Yank. The engines entered traffic with their US Army road numbers but had "A" appended to differentiate them from existing engines with the same numbers. [1] [2]

The engines were supplied with conical profile tyres. These were altered to QR standard cylindrical profile and pressed one-sixteenth of an inch inwards on the wheels to reduce wear. In 1943 the decision was taken to alter the second and third coupled wheels to thin flanges. A number of other modifications were carried out over the years.

The engines were fitted with Walschaerts valve gear. The original tenders rode poorly and resulted in a speed limit of 30 mph being imposed with a prohibition on passenger train working. The axle load of these tenders also restricted the engines to main line usage. The floor level shovelling plate made the fireman's work more difficult. One feature that did prove popular was the use of louvre coal boards and these subsequently became standard on all QR steam engines. The headlight mounted on the smokebox door proved to have advantages and was later adopted for some other classes. [2]

In 1958, No. 217A was fitted with a tender taken from a withdrawn C16 class locomotive. The previous restrictions were then lifted. All 19 members of the class then remaining in service had been similarly treated by 1963. [1] [2]

After being fitted with these tenders, seven of the class was attached to Alpha where they had a brief period of glory in the early 1960s when they replaced the C17 Class hauling the air-conditioned Midlander between Alpha and Longreach. The American engines with a larger boiler capacity were able to reduce running times in the sections that contained many long banks. Diesel locomotives took over the working in 1963.

Preservation

Two have been preserved:

Related Research Articles

<span class="mw-page-title-main">Steam locomotive</span> Railway locomotive that produces its pulling power through a steam engine

A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels.

<span class="mw-page-title-main">4-8-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-8-0 represents the wheel arrangement of four leading wheels on two axles, usually in a leading truck or bogie, eight powered and coupled driving wheels on four axles and no trailing wheels. In North America and in some other countries the type was usually known as the Twelve-wheeler.

The United States Army Transportation Corps S160 Class is a class of 2-8-0 Consolidation steam locomotive, designed for heavy freight work in Europe during World War II. A total of 2,120 were built and they worked on railroads across much of the world, including Africa, Asia, all of Europe and South America.

<span class="mw-page-title-main">USATC S118 Class</span>

The United States Army Transportation Corps (USATC) S118 Class is a class of 2-8-2 steam locomotive. Built to either 3 ft, 1,000 mmmetre gauge or 3 ft 6 in gauge, they were used in at least 24 different countries.

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, a 4-8-2+2-8-4 is a Garratt articulated locomotive consisting of a pair of 4-8-2 engine units back to back, with the boiler and cab suspended between them. The 4-8-2 wheel arrangement has four leading wheels on two axles, usually in a leading bogie, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. Since the 4-8-2 type is generally known as a Mountain, the corresponding Garratt type is usually known as a Double Mountain.

<span class="mw-page-title-main">New South Wales AD60 class locomotive</span> Class of four-cylinder Garratt locomotives

The New South Wales AD60 class were Beyer-Garratt patent articulated four-cylinder, simple, non-condensing, coal-fired superheated, 4-8-4+4-8-4 heavy goods steam locomotives built by Beyer, Peacock & Company for the New South Wales Government Railways in Australia.

<span class="mw-page-title-main">Queensland C17 class locomotive</span> Class of Australian 4–8–0 locomotives

The Queensland Railways C17 class locomotive are a class of 4-8-0 steam locomotives operated by the Queensland Railways.

<span class="mw-page-title-main">Queensland BB18¼ class locomotive</span> Class of Australian 4-6-2 locomotives

The Queensland Railways BB18¼ class locomotive was a class of 4-6-2 steam locomotives operated by the Queensland Railways.

<span class="mw-page-title-main">Queensland PB15 class locomotive</span> Class of Australian 4-6-0 locomotives

The Queensland Railways PB15 class locomotive is an old class of 4-6-0 steam engines operated by the Queensland Railways.

The Queensland Pioneer Steam Railway is located near Ipswich, Queensland, Australia and runs through the former West Moreton pioneering coal fields. It was first opened in 1881 by colliery proprietor and politician Lewis Thomas (1832-1913) as a tramway to his coal mines.

<span class="mw-page-title-main">South African Class 20 2-10-2</span> 1935 design of steam locomotive

The South African Railways Class 20 2-10-2 of 1935 was a steam locomotive.

<span class="mw-page-title-main">Queensland C16 class locomotive</span> Class of Australian 4-8-0 locomotives

The Queensland Railways C16 class locomotive is a class of 4-8-0 steam locomotives that was operated by the Queensland Railways.

Between 1864 and 1958, Queensland Railways ordered 47 types of locomotives for purposes such as freight, passenger and mail train use.

<span class="mw-page-title-main">Queensland Beyer-Garratt class</span> Class of Australian 4-8-2+2-8-4 locomotives

The Queensland Railways Beyer-Garratt class locomotive was a class of 4-8-2+2-8-4 steam locomotives operated by the Queensland Railways.

<span class="mw-page-title-main">Queensland B18¼ class locomotive</span> Class of Australian 4-6-2 locomotives

The Queensland Railways B18¼ class locomotive was a class of 4-6-2 steam locomotives operated by the Queensland Railways.

<span class="mw-page-title-main">Queensland D17 class locomotive</span> Class of Australian 4-6-4T locomotives

The Queensland Railways D17 class locomotive was a class of 4-6-4T steam locomotives operated by the Queensland Railways.

The Queensland Railways C19 class locomotive was a class of 4-8-0 steam locomotives operated by the Queensland Railways.

<span class="mw-page-title-main">Queensland B16½ class locomotive</span> Class of Australian 2-6-2 locomotive

The Queensland Railways B16½ class locomotive was a one-off 2-6-2 steam locomotive operated by the Queensland Railways.

<span class="mw-page-title-main">Evans, Anderson, Phelan & Co</span>

Evans, Anderson, Phelan & Co was an Australian engineering and railway rolling stock manufacturer, located at Kangaroo Point, Queensland. It manufactured steam locomotives for the Queensland Railways until 1927. The works were not located near a railway, so completed locomotives were delivered along Main Street on temporary track.

The Queensland Railways B15 class locomotive is an old class of 4-6-0 engines operated by the Queensland Railways.

References

  1. 1 2 3 Armstrong, John (1994). Locomotives in the Tropics Volume 2. Brisbane: Australian Railway Historical Society. pp. 102–108. ISBN   9780909937263.
  2. 1 2 3 4 Turner, Jim (1997). Australian Steam Locomotives 1896-1958. Kenthurst: Kangaroo Press. p. 127. ISBN   086417778X.
  3. Oberg, Leon (2010). Locomotives of Australia 1850s-2010. Dural: Rosenberg Publishing. pp. 224/225. ISBN   9781921719011.
  4. Clark, Peter (2012). An Australian Locomotive Guide. Rosenberg Publishing. p. 73. ISBN   9781921719554.
  5. AC16 221A Australian Steam

Tourret, R. (1995). Allied Military Locomotives of the Second World War. Abingdon, Oxon: Tourret Publishing. ISBN   0-905878-06-X.