Toothpaste is a paste or gel dentifrice used with a toothbrush to clean and maintain the aesthetics and health of teeth. Toothpaste is used to promote oral hygiene: it is an abrasive that aids in removing dental plaque and food from the teeth, assists in suppressing halitosis, and delivers active ingredients (most commonly fluoride) to help prevent tooth decay (dental caries) and gum disease (gingivitis). [1] Owing to differences in composition and fluoride content, not all toothpastes are equally effective in maintaining oral health. The decline of tooth decay during the 20th century has been attributed to the introduction and regular use of fluoride-containing toothpastes worldwide. [2] [3] Large amounts of swallowed toothpaste can be poisonous. [4] Common colors for toothpaste include white (sometimes with colored stripes or green tint) and blue.
Since 5000 BC, the Egyptians made a tooth powder, which consisted of powdered ashes of ox hooves, myrrh, powdered and burnt eggshells, and pumice. The Greeks, and then the Romans, improved the recipes by adding abrasives such as crushed bones and oyster shells. [5] In the 9th century, Iraqi musician and fashion designer Ziryab invented a type of toothpaste, which he popularized throughout Islamic Spain. The exact ingredients of this toothpaste are unknown, but it was reported to have been both "functional and pleasant to taste". [6] It is not known whether these early toothpastes were used alone, were to be rubbed onto the teeth with rags, or were to be used with early toothbrushes, such as neem-tree twigs and miswak . During Japan's Edo period, inventor Hiraga Gennai's Hika rakuyo (1769) contained advertisements for Sosekiko, a "toothpaste in a box." [7] Toothpastes or powders came into general use in the 19th century.
Toothpastes are generally useful to maintain dental health. Toothpastes containing fluoride are effective at preventing tooth decay. [2] [8] [9] Toothpastes may also help to control and remove plaque build-up, promoting healthy gums. A 2016 systematic review indicated that using toothpaste when brushing the teeth does not necessarily impact the level of plaque removal. [10] However, the active ingredients in toothpastes are able to prevent dental diseases with regular use. [11]
Toothpastes are derived from a variety of components, the three main ones being abrasives, fluoride, and detergent.
Abrasives constitute 8-20% of a typical toothpaste. [11] These insoluble particles are designed to help remove plaque from the teeth. [12] The removal of plaque inhibits the accumulation of tartar (calculus) helping to minimize the risk of gum disease. [13] Representative abrasives include particles of aluminum hydroxide (Al(OH)3), calcium carbonate (CaCO3), magnesium carbonate (MgCO3), sodium bicarbonate, various calcium hydrogen phosphates, various silicas and zeolites, and hydroxyapatite (Ca5(PO4)3OH).
After the Microbead-Free Waters Act of 2015, the use of microbeads in toothpaste has been discontinued in the US, [14] however since 2015 the industry has shifted toward instead using FDA-approved "rinse-off" metallized-plastic glitter as their primary abrasive agent. [15] [16] [17] Some brands contain powdered white mica, which acts as a mild abrasive, and also adds a cosmetic glittery shimmer to the paste. The polishing of teeth removes stains from tooth surfaces, but has not been shown to improve dental health over and above the effects of the removal of plaque and calculus. [18]
Abrasives, like the dental polishing agents used in dentists' offices, also cause a small amount of enamel erosion which is termed "polishing" action. The abrasive effect of toothpaste is indicated by its RDA value. Toothpastes with RDA values above 250 are potentially damaging to the surfaces of teeth. The American National Standards Institute and American Dental Association considers toothpastes with an RDA below 250 to be safe and effective for a lifetime of use. [19]
Fluoride in various forms is the most popular and effective active ingredient in toothpaste to prevent cavities. [12] Fluoride is present in small amounts in plants, animals, and some natural water sources. The additional fluoride in toothpaste has beneficial effects on the formation of dental enamel and bones. Sodium fluoride (NaF) is the most common source of fluoride, but stannous fluoride (SnF2), and sodium monofluorophosphate (Na2PO3F) are also used. [12] At similar fluoride concentrations, toothpastes containing stannous fluoride have been shown to be more effective than toothpastes containing sodium fluoride for reducing the incidence of dental caries and dental erosion, [20] [21] [22] [23] [24] as well as reducing gingivitis. [25] [26] [27] [28] [29] Some stannous fluoride-containing toothpastes also contain ingredients that allow for better stain and calculus removal. [30] A systematic review revealed stabilised stannous fluoride-containing toothpastes had a positive effect on the reduction of plaque, gingivitis and staining, with a significant reduction in calculus and halitosis compared to other toothpastes. [31] Furthermore, numerous clinical trials have shown gluconate chelated stannous fluoride toothpastes possess superior protection against dental erosion and dentine hypersensitivity compared to other fluoride-containing and fluoride-free toothpastes. [32]
Much of the toothpaste sold in the United States has 1,000 to 1,100 parts per million fluoride. In European countries, such as the UK or Greece, the fluoride content is often higher; a sodium fluoride content of 0.312% w/w (1,450 ppm fluoride) or stannous fluoride content of 0.454% w/w (1,100 ppm fluoride) is common. All of these concentrations are likely to prevent tooth decay, according to a 2019 Cochrane review. [9] Concentrations below 1,000 ppm are not likely to be preventive, and the preventive effect increases with concentration. [9] Clinical trials support the use of high fluoride (5,000 ppm fluoride) dentifrices, for prevention of root caries in elderly adults by reducing the amount of plaque accumulated, decreasing the number of mutans streptococci and lactobacilli and possibly promoting calcium fluoride deposits to a higher degree than after the use of traditional fluoride containing dentifrices. [9]
Many, although not all, toothpastes contain sodium lauryl sulfate (SLS) or related surfactants (detergents). SLS is found in many other personal care products as well, such as shampoo, and is mainly a foaming agent, which enables uniform distribution of toothpaste, improving its cleansing power. [18]
Triclosan, an antibacterial agent, is a common toothpaste ingredient in the United Kingdom. Triclosan or zinc chloride prevent gingivitis and, according to the American Dental Association, helps reduce tartar and bad breath. [1] [33] A 2006 review of clinical research concluded there was evidence for the effectiveness of 0.30% triclosan in reducing plaque and gingivitis. [34] Another Cochrane review in 2013 has found that triclosan achieved a 22% reduction in plaque, and in gingivitis, a 48% reduction in bleeding gums. However, there was insufficient evidence to show a difference in fighting periodontitis and there was no evidence either of any harmful effects associated with the use of triclosan toothpastes for more than 3 years. The evidence relating to plaque and gingivitis was considered to be of moderate quality while for periodontitis was low quality. [35] Recently, triclosan has been removed as an ingredient from well-known toothpaste formulations. This may be attributed to concerns about adverse effects associated with triclosan exposure. Triclosan use in cosmetics has been positively correlated with triclosan levels in human tissues, plasma and breast milk, and is considered to have potential neurotoxic effects. [36] Long-term studies are needed to substantiate these concerns.
Chlorhexidine is another antimicrobial agent used in toothpastes; however, it is more commonly added in mouthwash products. [37] Sodium laureth sulfate, a foaming agent, is a common toothpaste ingredient that also possesses some antimicrobial activities. [38] There are also many commercial products available in the market containing different essential oils, herbal ingredients (e.g. chamomile, neem, chitosan, Aloe vera ), and natural or plant extracts (e.g. hinokitiol). [39] These ingredients are claimed by the manufacturers to fight plaque, bad breath and prevent gum disease. A 2020 systematic metareview found that herbal toothpastes are as effective as non-herbal toothpastes in reducing dental plaque at shorter period of follow-up (4 weeks). [40] However, this evidence comes from low-quality studies.
The stannous (tin) ion, commonly added to toothpastes as stannous fluoride or stannous chloride, has been shown to have antibacterial effects in the mouth. Research has shown that stannous fluoride-containing toothpaste inhibits extracellular polysaccharide (EPS) production in a multispecies biofilm greater than sodium fluoride-containing toothpaste. [41] This is thought to contribute to a reduction in plaque and gingivitis when using stannous fluoride-containing toothpastes when compared to other toothpastes, and has been evidenced through numerous clinical trials. [25] [26] [27] [28] [29] In addition to its antibacterial properties, stabilised stannous fluoride toothpastes have been shown to protect against dental erosion and dentine hypersensitivity, making it a multifunctional component in toothpaste formulations. [32]
Toothpaste comes in a variety of colors and flavors, intended to encourage use of the product. The three most common flavorants are peppermint, spearmint, and wintergreen. Toothpaste flavored with peppermint-anise oil is popular in the Mediterranean region. These flavors are provided by the respective oils, e.g. peppermint oil. [18] More exotic flavors include Anethole anise, apricot, bubblegum, cinnamon, fennel, lavender, neem, ginger, vanilla, lemon, orange, and pine. Alternatively, unflavored toothpastes exist.
Chemical repair (remineralization) of early tooth decay is promoted naturally by saliva. [42] However, this process can be enhanced by various remineralisation agents. [43] Fluoride promotes remineralization, but is limited by bioavailable calcium. [44] Casein phosphopeptide stabilised amorphous calcium phosphate (CPP-ACP) is a toothpaste ingredient containing bioavailable calcium that has been widely researched to be the most clinically effective remineralization agent that enhances the action of saliva and fluoride. [45] [46] [47] [48] Peptide-based systems, hydroxyapatite nanocrystals and a variety of calcium phosphates have been advocated as remineralization agents; however, more clinical evidence is required to substantiate their effectiveness. [48]
Agents are added to suppress the tendency of toothpaste to dry into a powder. Included are various sugar alcohols, such as glycerol, sorbitol, or xylitol, or related derivatives, such as 1,2-propylene glycol and polyethyleneglycol. [49] Strontium chloride or potassium nitrate is included in some toothpastes to reduce sensitivity. Two systemic meta-analysis reviews reported that arginine, and calcium sodium phosphosilicate – CSPS containing toothpastes are also effective in alleviating dentinal hypersensitivity respectively. [50] [51] Another randomized clinical trial found superior effects when both formulas were combined. [52]
Sodium polyphosphate is added to minimize the formation of tartar.[ citation needed ]
Chlorohexidine mouthwash has been popular for its positive effect on controlling plaque and gingivitis, [53] however, a systemic review studied the effects of chlorohexidine toothpastes and found insufficient evidence to support its use, tooth surface discoloration was observed as a side effect upon using it, which is considered a negative side effect that can affect patients' compliance. [54]
Sodium hydroxide, also known as lye or caustic soda, is listed as an inactive ingredient in some toothpaste, for example Colgate Total.
A systematic review reported two out of ten studies by the same authors on the same population showed toothpastes with xylitol as an ingredient were more effective at preventing dental caries in permanent teeth of children than toothpastes containing fluoride alone. Furthermore, xylitol has not been found to cause any harmful effects. However, further investigation into the efficacy of toothpastes containing xylitol is required as the currently available studies are of low quality and high risk of bias. [55]
Fluoride-containing toothpaste can be acutely toxic if swallowed in large amounts, [56] [57] but instances are exceedingly rare and result from prolonged and excessive use of toothpaste (i.e. several tubes per week). [58] Approximately 15 mg/kg body weight is the acute lethal dose, even though as small amount as 5 mg/kg may be fatal to some children. [59]
The risk of using fluoride is low enough that the use of full-strength toothpaste (1350–1500 ppm fluoride) is advised for all ages. However, smaller volumes are used for young children, for example, a smear of toothpaste until three years old. [57] A major concern of dental fluorosis is for children under 12 months ingesting excessive fluoride through toothpaste. Nausea and vomiting are also problems which might arise with topical fluoride ingestion. [59]
The inclusion of sweet-tasting but toxic diethylene glycol in Chinese-made toothpaste led to a recall in 2007 involving multiple toothpaste brands in several nations. [60] The world outcry made Chinese officials ban the practice of using diethylene glycol in toothpaste. [61]
Reports have suggested triclosan, an active ingredient in many kinds of toothpastes, can combine with chlorine in tap water to form chloroform. [62] An animal study revealed the chemical might modify hormone regulation, and many other lab researches proved bacteria might be able to develop resistance to triclosan in a way which can help them to resist antibiotics also. [63]
PEG is a common ingredient in some of the formulas of toothpastes; it is a hydrophilic polymer that acts as a dispersant in toothpastes. Also, it is used in many cosmetic and pharmaceutical formulas, for example: ointments, osmotic laxatives, some of the nonsteroidal anti-inflammatory drugs, other medications and household products. [64] However, 37 cases of PEG hypersensitivity (delayed and immediate) to PEG-containing substances have been reported since 1977, [65] suggesting that they have unrecognized allergenic potential. [65]
With the exception of toothpaste intended to be used on pets such as dogs and cats, and toothpaste used by astronauts, most toothpaste is not intended to be swallowed, and doing so may cause nausea or diarrhea. Tartar fighting toothpastes have been debated. [66] Sodium lauryl sulfate (SLS) has been proposed to increase the frequency of mouth ulcers in some people, as it can dry out the protective layer of oral tissues, causing the underlying tissues to become damaged. [67] In studies conducted by the university of Oslo on recurrent aphthous ulcers, it was found that SLS has a denaturing effect on the oral mucin layer, with high affinity for proteins, thereby increasing epithelial permeability. [68] In a double-blind cross-over study, a significantly higher frequency of aphthous ulcers was demonstrated when patients brushed with an SLS-containing versus a detergent-free toothpaste. Also patients with Oral Lichen Planus who avoided SLS-containing toothpaste benefited. [69] [70]
After using toothpaste, orange juice and other fruit juices are known to have an unpleasant taste if consumed shortly afterwards. Sodium lauryl sulfate, used as a surfactant in toothpaste, alters taste perception. It can break down phospholipids that inhibit taste receptors for sweetness, giving food a bitter taste. In contrast, apples are known to taste more pleasant after using toothpaste. [71] Distinguishing between the hypotheses that the bitter taste of orange juice results from stannous fluoride or from sodium lauryl sulfate is still an unresolved issue and it is thought that the menthol added for flavor may also take part in the alteration of taste perception when binding to lingual cold receptors.[ citation needed ]
Many toothpastes make whitening claims. Abrasion is the principal way that toothpaste removes stains, and toothpastes that are not marketed as whitening can still remove stains by abrasion. [72] Some of these toothpastes contain peroxide, the same ingredient found in tooth bleaching gels. Whitening toothpaste cannot alter the natural color of teeth or reverse discoloration by penetrating surface stains or decay. To remove surface stains, whitening toothpaste may include abrasives to gently polish the teeth or additives such as sodium tripolyphosphate to break down or dissolve stains. When used twice a day, whitening toothpaste typically takes two to four weeks to make teeth appear whiter. Whitening toothpaste is generally safe for daily use, but excessive use might damage tooth enamel. [73] A recent systematic review in 2017 concluded that nearly all dentifrices that are specifically formulated for tooth whitening were shown to have a beneficial effect in reducing extrinsic stains, irrespective of whether or not a chemical discoloration agent was added. [74] However, the whitening process can permanently reduce the strength of the teeth, as the process scrapes away a protective outer layer of enamel. [75]
Herbal toothpastes are marketed to consumers who wish to avoid some of the artificial ingredients commonly found in regular toothpastes. The ingredients found in so-called natural toothpastes vary widely but often include baking soda, aloe, eucalyptus oil, myrrh, camomile, calendula, neem, toothbrush tree, plant extract (strawberry extract), and essential oils. Many herbal toothpastes do not contain fluoride or sodium lauryl sulfate. [40]
A 2020 meta-analysis showed some evidence for the efficacy of herbal toothpaste, albeit from poor quality studies. [40] According to a study by the Delhi Institute of Pharmaceutical Sciences and Research, many of the herbal toothpastes being sold in India were adulterated with nicotine. [76]
Charcoal has also been incorporated in toothpaste formulas; however, there is no evidence to determine its safety and effectiveness, and the American Dental Association does not recommend its use. [72]
In the United States toothpaste is regulated by the U.S. Food and Drug Administration as a cosmetic, except for ingredients with a medical purpose, such as fluoride, which are regulated as drugs. [77] Drugs require scientific studies and FDA approval in order to be legally marketed in the United States, but cosmetic ingredients do not require pre-approval, except for color additives. The FDA does have labelling and requirements and bans certain ingredients. [78]
This section needs additional citations for verification .(September 2017) |
Striped toothpaste was invented by Leonard Marraffino in 1955. The patent (US patent 2,789,731 , issued 1957) was subsequently sold to Unilever, which marketed the novelty under the Stripe brand-name in the early 1960s. This was followed by the introduction of the Signal brand in Europe in 1965 (UK patent 813,514). Although Stripe was initially very successful, it never again achieved the 8% market share that it cornered during its second year.
Marraffino's design, which remains in use for single-color stripes, is simple. The main material, usually white, sits at the crimp end of the toothpaste tube and makes up most of its bulk. A thin pipe, through which that carrier material will flow, descends from the nozzle to it. The stripe-material (this was red in Stripe) fills the gap between the carrier material and the top of the tube. The two materials are not in separate compartments, but they are sufficiently viscous that they will not mix. When pressure is applied to the toothpaste tube, the main material squeezes down the thin pipe to the nozzle. Simultaneously, the pressure applied to the main material causes pressure to be forwarded to the stripe material, which thereby issues out through small holes (in the side of the pipe) onto the main carrier material as it is passing those holes.
In 1990, Colgate-Palmolive was granted a patent (USPTO 4,969,767 ) for two differently colored stripes. In this scheme, the inner pipe has a cone-shaped plastic guard around it, and about halfway up its length. Between the guard and the nozzle-end of the tube is a space for the material for one color, which issues out of holes in the pipe. On the other side of the guard is space for second stripe-material, which has its own set of holes.
In 2016, Colgate-Palmolive was granted a patent (USPTO U.S. patent 20,160,228,347 ) for suitable sorts of differently colored toothpastes to be filled directly into tubes to produce a striped mix without any separate compartments. This required adjustment of the different components' behavior (rheology) so that stripes are produced when the tube is squeezed. [79]
Striped toothpaste should not be confused with layered toothpaste. Layered toothpaste requires a multi-chamber design (e.g. USPTO 5,020,694 ), in which two or three layers extrude out of the nozzle. This scheme, like that of pump dispensers (USPTO 4,461,403 ), is more complicated (and thus, more expensive to manufacture) than either the Marraffino design or the Colgate designs.
The iconic depiction of a wave-shaped blob of toothpaste sitting on a toothbrush is called a "nurdle". [80]
Tooth powders for use with toothbrushes came into general use in the 19th century in Britain. Most were homemade, with chalk, pulverized brick, or salt as ingredients. An 1866 Home Encyclopedia recommended pulverized charcoal, and cautioned that many patented tooth powders that were commercially marketed did more harm than good.
Arm & Hammer marketed a baking soda-based toothpowder in the United States until approximately 2000, and Colgate currently markets toothpowder in India and other countries.
An 18th-century American and British toothpaste recipe called for burned bread. Another formula around this time called for dragon's blood (a resin), cinnamon, and burned alum.[ citation needed ]
In 1873 the Colgate company began the mass production of aromatic toothpaste in jars. [81]
By 1900, a paste made of hydrogen peroxide and baking soda was recommended for use with toothbrushes. Pre-mixed toothpastes were first marketed in the 19th century, but did not surpass the popularity of tooth-powder until World War I.
Together with Willoughby D. Miller, Newell Sill Jenkins developed the first toothpaste containing disinfectants, branded as Kolynos. [82] The name is a combination of two Greek words, meaning "beautifier" and "disease preventer". [83] Numerous attempts to produce the toothpaste by pharmacists in Europe proved uneconomic. After returning to the US, he continued experimenting with Harry Ward Foote (1875–1942), professor of chemistry at Sheffield Chemical Laboratory of Yale University. [84] After 17 years of development of Kolynos and clinical trials, Jenkins retired and transferred the production and distribution to his son Leonard A. Jenkins, who brought the first toothpaste tubes on the market on April 13, 1908. Within a few years the company expanded in North America, Latin America, Europe and the Far East. A branch operation opened in London in 1909. In 1937, Kolynos was produced in 22 countries and sold in 88 countries. Kolynos has been sold mainly in South America and in Hungary. Colgate-Palmolive took over the production of American Home Products in 1995 at a cost of one billion US dollars. [85]
Fluoride was first added to toothpastes in the 1890s. Tanagra, containing calcium fluoride as the active ingredient, was sold by Karl F. Toellner Company, of Bremen, Germany, based upon the early work of chemist Albert Deninger. [86] An analogous invention by Roy Cross, of Kansas City, Missouri, was initially criticized by the American Dental Association (ADA) in 1937. Fluoride toothpastes developed in the 1950s received the ADA's approval. To develop the first ADA-approved fluoride toothpaste, Procter & Gamble started a research program in the early 1940s. In 1950, Procter & Gamble developed a joint research project team headed by Joseph C. Muhler at Indiana University to study new toothpaste with fluoride. In 1955, Procter & Gamble's Crest launched its first clinically proven fluoride-containing toothpaste. On August 1, 1960, the ADA reported that "Crest has been shown to be an effective anticavity (decay preventative) dentifrice that can be of significant value when used in a conscientiously applied program of oral hygiene and regular professional care."
In 1980, the Japanese company, Sangi Co., Ltd., launched APADENT, the world's first remineralizing toothpaste to use a nano-form of hydroxyapatite, the main component of tooth enamel, rather than fluoride, to remineralize areas of mineral loss below the surface of tooth enamel (incipient caries lesions). After many years of laboratory experiments and field trials, [87] its hydroxyapatite ingredient was approved as an active anti-caries agent by the Japanese Ministry of Health in 1993, and given the name Medical Hydroxyapatite to distinguish it from other forms of hydroxyapatite used in toothpaste, such as dental abrasives.
In 2006, BioRepair appeared in Europe with the first European toothpaste containing synthetic hydroxylapatite as an alternative to fluoride for the remineralization and reparation of tooth enamel. The "biomimetic hydroxylapatite" is intended to protect the teeth by creating a new layer of synthetic enamel around the tooth instead of hardening the existing layer with fluoride that chemically changes it into fluorapatite. [88]
Toothpaste is usually dispensed via a collapsible tube or with a more rigid pump. Several traditional and innovative designs have been developed. [89] The dispenser must be matched to the flow properties of the toothpaste. [90]
In 1880, Doctor Washington Sheffield of New London, CT manufactured toothpaste into a collapsible tube, Dr. Sheffield's Creme Dentifrice. He had the idea after his son traveled to Paris and saw painters using paint from tubes. In York in 1896, Colgate & Company Dental Cream was packaged in collapsible tubes imitating Sheffield. The original collapsible toothpaste tubes were made of lead. [91] [92]
Mouthwash, mouth rinse, oral rinse, or mouth bath is a liquid which is held in the mouth passively or swirled around the mouth by contraction of the perioral muscles and/or movement of the head, and may be gargled, where the head is tilted back and the liquid bubbled at the back of the mouth.
Tooth enamel is one of the four major tissues that make up the tooth in humans and many animals, including some species of fish. It makes up the normally visible part of the tooth, covering the crown. The other major tissues are dentin, cementum, and dental pulp. It is a very hard, white to off-white, highly mineralised substance that acts as a barrier to protect the tooth but can become susceptible to degradation, especially by acids from food and drink. In rare circumstances enamel fails to form, leaving the underlying dentin exposed on the surface.
Tooth decay, also known as cavities or caries, is the breakdown of teeth due to acids produced by bacteria. The cavities may be a number of different colors, from yellow to black. Symptoms may include pain and difficulty eating. Complications may include inflammation of the tissue around the tooth, tooth loss and infection or abscess formation. Tooth regeneration is an ongoing stem cell–based field of study that aims to find methods to reverse the effects of decay; current methods are based on easing symptoms.
Sodium triphosphate (STP), also sodium tripolyphosphate (STPP), or tripolyphosphate (TPP),) is an inorganic compound with formula Na5P3O10. It is the sodium salt of the polyphosphate penta-anion, which is the conjugate base of triphosphoric acid. It is produced on a large scale as a component of many domestic and industrial products, especially detergents. Environmental problems associated with eutrophication are attributed to its widespread use.
Tooth whitening or tooth bleaching is the process of lightening the color of human teeth. Whitening is often desirable when teeth become yellowed over time for a number of reasons, and can be achieved by changing the intrinsic or extrinsic color of the tooth enamel. The chemical degradation of the chromogens within or on the tooth is termed as bleaching.
Abrasion is the non-carious, mechanical wear of tooth from interaction with objects other than tooth-tooth contact. It most commonly affects the premolars and canines, usually along the cervical margins. Based on clinical surveys, studies have shown that abrasion is the most common but not the sole aetiological factor for development of non-carious cervical lesions (NCCL) and is most frequently caused by incorrect toothbrushing technique.
Fluoride therapy is the use of fluoride for medical purposes. Fluoride supplements are recommended to prevent tooth decay in children older than six months in areas where the drinking water is low in fluoride. It is typically used as a liquid, pill, or paste by mouth. Fluoride has also been used to treat a number of bone diseases.
Dental plaque is a biofilm of microorganisms that grows on surfaces within the mouth. It is a sticky colorless deposit at first, but when it forms tartar, it is often brown or pale yellow. It is commonly found between the teeth, on the front of teeth, behind teeth, on chewing surfaces, along the gumline (supragingival), or below the gumline cervical margins (subgingival). Dental plaque is also known as microbial plaque, oral biofilm, dental biofilm, dental plaque biofilm or bacterial plaque biofilm. Bacterial plaque is one of the major causes for dental decay and gum disease.
Sodium monofluorophosphate, commonly abbreviated SMFP, is an inorganic compound with the chemical formula Na2PO3F. Typical for a salt, SMFP is odourless, colourless, and water-soluble. This salt is an ingredient in some toothpastes.
Early childhood caries (ECC), formerly known as nursing bottle caries, baby bottle tooth decay, night bottle mouth and night bottle caries, is a disease that affects teeth in children aged between birth and 71 months. ECC is characterized by the presence of 1 or more decayed, missing, or filled tooth surfaces in any primary tooth. ECC has been shown to be a very common, transmissible bacterial infection, usually passed from the primary caregiver to the child. The main bacteria responsible for dental cavities are Streptococcus mutans (S.mutans) and Lactobacillus. There is also evidence that supports that those who are in lower socioeconomic populations are at greater risk of developing ECC.
Dentin hypersensitivity is dental pain which is sharp in character and of short duration, arising from exposed dentin surfaces in response to stimuli, typically thermal, evaporative, tactile, osmotic, chemical or electrical; and which cannot be ascribed to any other dental disease.
Tin(II) fluoride, commonly referred to commercially as stannous fluoride (from Latin stannum, 'tin'), is a chemical compound with the formula SnF2. It is a colourless solid used as an ingredient in toothpastes.
Tooth brushing is the act of scrubbing teeth with a toothbrush equipped with toothpaste. Interdental cleaning can be useful with tooth brushing, and together these two activities are the primary means of cleaning teeth, one of the main aspects of oral hygiene. The recommended amount of time for tooth brushing is two minutes each time for two times a day.
Tooth polishing procedures are done to smooth the surfaces of teeth and restorations. The purpose of polishing is to remove extrinsic stains, remove dental plaque accumulation, increase aesthetics and to reduce corrosion of metallic restorations. Tooth polishing has little therapeutic value and is usually done as a cosmetic procedure after debridement and before fluoride application. Common practice is to use a prophy cup—a small motorized rubber cup—along with an abrasive polishing compound.
Oral hygiene is the practice of keeping one's oral cavity clean and free of disease and other problems by regular brushing of the teeth and adopting good hygiene habits. It is important that oral hygiene be carried out on a regular basis to enable prevention of dental disease and bad breath. The most common types of dental disease are tooth decay and gum diseases, including gingivitis, and periodontitis.
Fluoride varnish is a highly concentrated form of fluoride that is applied to the tooth's surface by a dentist, dental hygienist or other dental professional, as a type of topical fluoride therapy. It is not a permanent varnish but due to its adherent nature it is able to stay in contact with the tooth surface for several hours. It may be applied to the enamel, dentine or cementum of the tooth and can be used to help prevent decay, remineralise the tooth surface and to treat dentine hypersensitivity. There are more than 30 fluoride-containing varnish products on the market today, and they have varying compositions and delivery systems. These compositional differences lead to widely variable pharmacokinetics, the effects of which remain largely untested clinically.
Tooth remineralization is the natural repair process for non-cavitated tooth lesions, in which calcium, phosphate and sometimes fluoride ions are deposited into crystal voids in demineralised enamel. Remineralization can contribute towards restoring strength and function within tooth structure.
Gingivitis is a non-destructive disease that causes inflammation of the gums; ulitis is an alternative term. The most common form of gingivitis, and the most common form of periodontal disease overall, is in response to bacterial biofilms that are attached to tooth surfaces, termed plaque-induced gingivitis. Most forms of gingivitis are plaque-induced.
Silver diammine fluoride (SDF), also known as silver diamine fluoride in most of the dental literature, is a topical medication used to treat and prevent dental caries and relieve dentinal hypersensitivity. It is a colorless or blue-tinted, odourless liquid composed of silver, ammonium and fluoride ions at a pH of 10.4 or 13. Ammonia compounds reduce the oxidative potential of SDF, increase its stability and helps to maintain a constant concentration over a period of time, rendering it safe for use in the mouth. Silver and fluoride ions possess antimicrobial properties and are used in the remineralization of enamel and dentin on teeth for preventing and arresting dental caries.
Topical fluorides are fluoride-containing drugs indicated in prevention and treatment of dental caries, particularly in children's primary dentitions. The dental-protecting property of topical fluoride can be attributed to multiple mechanisms of action, including the promotion of remineralization of decalcified enamel, the inhibition of the cariogenic microbial metabolism in dental plaque and the increase of tooth resistance to acid dissolution. Topical fluoride is available in a variety of dose forms, for example, toothpaste, mouth rinses, varnish and silver diamine solution. These dosage forms possess different absorption mechanisms and consist of different active ingredients. Common active ingredients include sodium fluoride, stannous fluoride, silver diamine fluoride. These ingredients account for different pharmacokinetic profiles, thereby having varied dosing regimes and therapeutic effects. A minority of individuals may experience certain adverse effects, including dermatological irritation, hypersensitivity reactions, neurotoxicity and dental fluorosis. In severe cases, fluoride overdose may lead to acute toxicity. While topical fluoride is effective in preventing dental caries, it should be used with caution in specific situations to avoid undesired side effects.
Seventeen studies support the antiplaque, antigingivitis effects of dentifrices containing 0.30 percent triclosan, 2.0 percent Gantrez copolymer.