All-figure dialling

Last updated

All-figure dialling was a telephone numbering plan introduced in the United Kingdom starting in 1966 that replaced the traditional system of using initial letters of telephone exchange names as the first part of a telephone number. [1] The change affected subscriber numbers in the cities of Birmingham, Edinburgh, Glasgow, Liverpool, London and Manchester which used the Director telephone system.

Contents

The transition to all-figure dialling occurred between 1966 and 1970 and was initiated by the General Post Office. It was one of the first in a series of changes in the organisation of British telephone numbers. In most areas the change initially only affected the presentation of area codes, but in six multiple exchange director areas such as the London telephone area, the change required the introduction of new local exchange codes. The period of parallel operation of the old and new systems ended in 1970 with the ANN: All-figure Numbers Now advertising campaign. The changes were required for the continued good operation of the telephone service, but were considered controversial at the time. They occurred because of the increase in subscriber-dialled international calls from countries which used a different mapping of letters to numbers on the rotary dial and because the number of useful exchange mnemonics that were possible under the existing system was being exhausted. The implementation of all-figure dialling and new local exchange codes in director areas allowed changes to be made to routing of calls into and out of these areas.

Background

In six metropolitan areas around major cities, groups of multiple exchanges operated in a director telephone system. The six cities were Birmingham, Edinburgh, Glasgow, Liverpool, London and Manchester. In these areas the first three digits of the seven digit subscriber number was presented as letters chosen to represent the local exchange within the director area. The letters and numbers corresponded as follows:

1234567890
ABCDEFGHIJKLMNPRSTUVWXYOQ

For example, in the London telephone area a subscriber number on the Wimbledon exchange was presented WIM 1234 and dialled as 946 1234. These local exchange codes (introduced in London in 1927) predated the introduction of STD codes by several decades.

The General Post Office issued subscriber trunk dialling (STD) codes for most areas during the late 1950s and early 1960s. The codes allowed subscribers to call other exchanges directly and without the assistance of an operator. To help the public remember the new codes they were represented by a recognisable combination of two letters and a number.

Outside the director areas, at least three character codes were dialled after an initial '0' which gave trunk access. For example, the code for Bath was BA5, which was dialled as 0225. The rotary dial included the corresponding letters next to the appropriate digits.

Problems

The continued operation of the system presented a number of problems. As STD was expanded to non-director areas, every telephone which had been issued with no letters on the dials needed to be altered for alphanumeric dialling. With the growth of subscriber dialled international calls from abroad and the incompatible allocation of letters to numbers on foreign dials, there was an increase in the number of dialling errors. In London the number of three letter codes that could be used to represent exchanges had been exhausted. Significant changes were planned to the way calls in and out of the London telephone area were to be handled that required exchange codes to be grouped together into sectors and it was not possible to implement these changes without a transition to all-figure dialling. [2] The General Post Office produced a pamphlet All-Figure Telephone Numbers in 1965 which summarised the problems.

Changes

From 1966, UK telephone dialling codes ceased to be represented with letters. In most areas this did not require any changes to the telephone codes or numbers, e.g. the Sevenoaks STD code changed from 0SE2 to its numerical equivalent 0732. However, in Director telephone areas such as the London telephone area, the changes permitted many new exchange codes to be issued that did not correspond to letters representing the geographic locations. As '1' was also available for the 'B' and 'C' digits, this allowed many more exchange codes such as 211, 212, 221 to be used. At the same time, many local exchange codes were altered in order to group them into geographic sectors (e.g. GROsvenor became 499 rather than 470) to eliminate the need for all incoming calls to be routed via central London.

In the Director areas the old codes continued to work in parallel with new codes until 1970 when the "ANN: All-figure Numbers Now" advertising campaign prompted callers to dial only the new codes. [3] By October 1969 in Edinburgh 79% of calls were being made using the new local exchange codes, in London 72% and in Glasgow 43%. London was the first to withdraw the ability to dial the old codes in January 1970 and from April the parallel operation was withdrawn in the other five cities. [4]

The change to all-figure dialling was controversial and was debated in both Houses of Parliament. Among the criticisms of the new system was the perceived difficulty in remembering telephone numbers, the inability to easily recognise where a telephone number was located and the need for a change so soon after the implementation of subscriber trunk dialling. [5] [6]

See also

Related Research Articles

Direct distance dialing (DDD) is a telecommunication service feature in North America by which a caller may, without operator assistance, call any other user outside the local calling area. Direct dialing by subscribers typically requires extra digits to be dialed as prefixes to the directory telephone number of the destination. International Direct Distance Dialing (IDDD) extends the system beyond the geographic boundaries of the North American Numbering Plan (NANP).

Subscriber trunk dialling (STD), also known as subscriber toll dialing, is a telephone numbering plan feature and telecommunications technology in the United Kingdom and various Commonwealth countries for the dialling of trunk calls by telephone subscribers without the assistance of switchboard operators.

A telephone numbering plan is a type of numbering scheme used in telecommunication to assign telephone numbers to subscriber telephones or other telephony endpoints. Telephone numbers are the addresses of participants in a telephone network, reachable by a system of destination code routing. Telephone numbering plans are defined in each of the administrative regions of the public switched telephone network (PSTN) and in private telephone networks.

<span class="mw-page-title-main">Director telephone system</span> Telephone switching system used in the UK

The director telephone system was a development of the Strowger or step-by-step (SXS) switching system used in London and five other large cities in the UK from the 1920s to the 1980s.

<span class="mw-page-title-main">Telephone numbers in the United Kingdom</span>

In the United Kingdom, telephone numbers are administered by the Office of Communications (Ofcom). For this purpose, Ofcom established a telephone numbering plan, known as the National Telephone Numbering Plan, which is the system for assigning telephone numbers to subscriber stations.

Trunk and toll calling were two alternative methods of charging customers for long-distance calls in the United Kingdom in the first half of the 20th century. The distinction became obsolete with the introduction of subscriber trunk dialling (STD).

<span class="mw-page-title-main">Telephone exchange names</span> Alphabetic telephone numbering plan

A telephone exchange name or central office name was a distinguishing and memorable name assigned to a central office. It identified the switching system to which a telephone was connected, and facilitated the connection of telephone calls between switching systems in different localities.

A linked numbering scheme (LNS) is a dialing procedure in effect in a service area within which call routing between adjacent exchanges does not require a dialing code. The term is only used in the United Kingdom, but not in the North American Numbering Plan.

Widespread UK telephone code misconceptions, in particular brought on by the Big Number Change in 2000, have been reported by regulator Ofcom since publication of a report it commissioned in 2004.

<span class="mw-page-title-main">020</span> Dialling code for London in the United Kingdom

020 is the national dialling code for London in the United Kingdom. All subscriber numbers within the area code consist of eight digits and it has capacity for approaching 100 million telephone numbers. The code is used at 170 telephone exchanges in and around Greater London as part of the largest linked numbering scheme in the United Kingdom. In common with all other British area codes the initial '0' is a trunk prefix that is not required when dialling London from abroad.

<span class="mw-page-title-main">Telephone numbers in New Zealand</span> New Zealand numbering plan

The New Zealand telephone numbering plan describes the allocation of telephone numbers in New Zealand and the Pitcairn Islands.

0191 is the UK telephone dialling code used by Newcastle, Durham, Sunderland and other nearby areas in the north east of England.

National conventions for writing telephone numbers vary by country. The International Telecommunication Union (ITU) publishes a recommendation entitled Notation for national and international telephone numbers, e-mail addresses and Web addresses. Recommendation E.123 specifies the format of telephone numbers assigned to telephones and similar communication endpoints in national telephone numbering plans.

<span class="mw-page-title-main">Telephone number</span> Sequence of digits assigned to a telephone subscription

A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices for data transmission via the public switched telephone network (PSTN) or other public and private networks.

A group switching centre (GSC) was a United Kingdom telephone exchange used to provide local and trunk routing to local exchanges within its own and if required, adjacent group areas.

01708 is the national dialling code for Romford in the United Kingdom. The area it serves includes almost all of the London Borough of Havering and some adjacent areas. When STD codes were first introduced, Romford was assigned 0708 and 0402 was used for the rest of the current code area. After a sequence of changes in the early 1990s, culminating with PhONEday, the current 01708 code became active on 16 April 1995. All subscriber numbers within the area code consist of six digits. The code is used at eight telephone exchanges as part a linked numbering scheme. In common with all other British area codes the initial '0' is a trunk prefix that is not required when dialling Romford from abroad.

Telephone numbers in the United Kingdom have a flexible structure that reflects their historical demands, starting from many independent companies through a nationalised near-monopoly, to a system that supports many different services, including cellular phones, which were not envisaged when the system was first built. Numbers evolved in a piecemeal fashion, with numbers initially allocated on an exchange-by-exchange basis for calls connected by manual operators. Subscriber numbers reflected demand in each area, with single digit telephone numbers in very rural areas and longer numbers in cities.

The Cities of Manchester and Salford and some surrounding urban areas such as Stockport, Oldham and Bolton,, were the location of several advances in the development of telephony in the United Kingdom. A Manchester company installed the country's first regular telephone system in the city, wiring solutions which were adopted across Britain were initiated in Manchester and Stockport, the city was (arguably) the site of the UK's first telephone exchange and a service which was the forerunner of modern mobile phones was controlled from the city.

01527 is the national dialling code for Redditch in the United Kingdom. Before PhONEday the area code was 0527. The mnemonic for 0527 corresponds with LA 7 where LA could have been taken from the letters L and A in Lapworth, a small village in Warwickshire close to Redditch but not served by the 0527 dialling code. The original dialling code for Redditch was 0739, with the mnemonic RE 9 where RE are taken from the letters R and E in Redditch.

01932 is the national dialling code for Weybridge in the United Kingdom. Before PhONEday, the area code was 0932. The mnemonic for 0932 corresponds with WE 2, where "WE" is taken from the letters W and E in Weybridge.

References

  1. ↑ A R Valdar (2008). Understanding telecommunications networks. Institution of Engineering and Technology. p. 258.
  2. ↑ A R Valdar (2008). Understanding telecommunications networks. Institution of Engineering and Technology. p. 256.
  3. ↑ "Selling the network". Archived from the original on 1 January 2012. Retrieved 25 September 2012.
  4. ↑ "Glasgow response to all-figure dialling slow". The Glasgow Herald. 29 October 1969.
  5. ↑ "Lords Sitting: S.T.D. and All-Figure Dialling". Parliamentary Debates (Hansard) . House of Lords. 16 March 1967.
  6. ↑ "Commons Sitting: Telephone Service (All-Figure Numbers)". Parliamentary Debates (Hansard) . House of Commons. 12 May 1967.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.