Bell-Northern Research

Last updated

Bell-Northern Research
Industry Telecommunications, Networking
Fateabsorbed into Nortel Networks
Headquarters,
Canada
ProductsTelecommunications and computer network equipment and software research and development
Website www.bnr.ca

Bell-Northern Research (BNR) was a telecommunications research and development company established In 1971 when Bell Canada and Northern Electric combined their R&D organizations. It was jointly owned by Bell Canada and Northern Telecom. BNR was absorbed into Nortel Networks when that company changed its name from Northern Telecom in the mid-1990s.

Contents

BNR was based at the Carling Campus in Ottawa, Ontario, Canada, with campuses at locations around the world, including Research Triangle Park, North Carolina; Richardson, Texas; Ann Arbor, Michigan; and Harlow and Maidenhead, United Kingdom. Bell-Northern Research pioneered the development of digital technology, and created the first practical digital PBX, (SL1), and central office (DMS). Under the direction of then Nortel Chief Executive Officer, John Roth, BNR lost its separate identity in the 1990s, and was folded into the Nortel R&D organization. [1] [2]

History

For much of its early history, Bell Canada operated as the Canadian division of the Bell System. Development and manufacturing of their various telephony products generally took place in the US, and then, to avoid duty, were manufactured in Canada at their Northern Electric subsidiary (which would later become Nortel Networks), the Canadian analog to the US Western Electric.

Pre-1970s

Northern Electric spun off a subsidiary in 1934, Dominion Sound Equipment, originally to develop equipment for sound in movies. Over time, the division evolved in an attempt to use its design talent and manufacturing ability on third party projects. In 1937, this aspect became the Special Products Division. For many years the SPD was used as Bell Canada's R&D arm, although as before, most telephony designs were created at Bell Labs in the US.

In 1949, the United States Justice department attempted to force AT&T to divest itself of its Western Electric subsidiary. As a result of this legal action, Western Electric sold its shares in Northern Electric to Bell Canada. [3] In 1957, Northern Electric started its own research and development labs in Belleville, Ontario. Two years later, Northern Electric created the Northern Electric Research and Development Laboratories in Ottawa.

1970s

In 1971, Bell Canada and Northern Electric combined their R&D organizations and formed Bell-Northern Research. [2]

BNR's researchers pioneered the view that a telephone switch (PBX or Central Office) was best regarded as a special form of real-time computer, a view that was considered to be highly innovative in the 1970s. Although George Stibitz had foreseen this evolution at AT&T in the 1930s, subsequent generations of engineers, prior to the 1970s, regarded the switch as a piece of hardware, best hard-wired, to handle the basic telephone call where two parties connect, speak and hang up.

In the 1960s, however, this view was coming under a great deal of strain. Increasingly, telephone users wanted to conference call, forward, and record voice greetings, so common today. Such features required more flexibility in the controller, leading to the development of computer-controlled switching machines, notably the Bell Labs − Western Electric 1ESS. These early machines still had an analog, usually electromechanical switching matrix because the technology of the time did not permit the cost-effective dedication of a filter-codec to each subscriber. (Transmission systems had already gone digital, for example the D4 carrier system.)

Northern Electric introduced its first electronic central office system in 1969 with the SP1. The SP1 had a fully computer-based electronic control system, thus the name "SP", short for "stored program". Its switching matrix was still electromechanical. Rather than the reed relay matrix of the 1ESS, it used the minibar, a version of the crossbar switch.

BNR was, with Northern Telecom, a part owner of MicroSystems International a semiconductor manufacturer based in Kanata, outside Ottawa.

The Digital Switch

BNR introduced the Meridian SL-1 in 1975, the world's first all-digital PABX aimed at medium-sized businesses. The SL-1 was fully digital in both control and switching. As such the SL-1 was smaller, much more reliable, and offered many more features than an equivalent electromechanical system. The SL-1 design evolved into Meridian-1, and subsequently the CS1000x as Nortel's private network (or enterprise) flagship offering.

The SP-1 design was superseded by the DMS-100 central office switch and other members of the DMS family of products (DMS: digital multiplex switch). DMS extended the technology by fully integrating switching and transmission. This was a major advance that changed the way systems were built.

BNR's products were architecturally based on Complex Instruction Set (CISC) architectures prevalent in the 1970s, and on a series of underlying technologies. This was greatly influenced by the late 1970s success of the DEC VAX computer, a highly "elegant" and rather layered technology, realizable in a range of power. In the early 1990s, under Nortel CEO Jean Monty, the software for the flagship DMS product was segmented into layers ('Base', 'Telecom', and 'IEC' or Inter-Exchange Carrier) to improve maintainability of the product. The IEC layers were customer-specific, targeted towards Sprint, MCI, and a large group of small "United Carrier" companies that were subsequently swallowed up by Worldcom. Once the IEC layer was established, customer-specific releases could occur quarterly, whereas Telecom and Base programming was for baked-in code that only had infrequent, maintenance updates.

1980s

Through the 1980s attention turned from pure hardware to software development. The BNR Toronto lab introduced Meridian Mail in the 1980s, which went on to be a very successful product and forced the introduction of similar products from other telephony vendors. They later added automatic call distribution and other similar services.

At its zenith in the early 1980s, when it opened R&D centers in Mountain View, Ann Arbor and later in Research Triangle Park and Richardson, Texas, BNR's notable American employees included Whitfield Diffie, a noted authority on cryptography, and Robert Gaskins, who invented PowerPoint after leaving BNR, influenced in part by BNR's response to the very cumbersome presentation tools used by his department there. [4] J.W.J. Williams, the inventor of Heapsort was also an influential figure in the development of digital switching. [5]

As part of its internal IT infrastructure, BNR also created an email system called COCOS (COrporate COmmunication System), and a powerful relational database system called GERM (General Entity-Relationship Model).

BNR also had labs in Maidenhead, England, Montreal, Quebec, Edmonton, Alberta, Wollongong, Australia, and Tokyo, Japan; as well as Atlanta, Georgia and Ann Arbor, Michigan.

1990s

With the formation of Bell Canada Enterprises (later shortened to BCE) in 1983 as the parent company of Bell Canada and Northern Telecom, BNR in Canada was jointly owned 50-50 by Bell Canada and Nortel. Nortel assumed a majority share in BNR in 1996, and BNR was gradually folded into Nortel, which acquired the remainder of BNR when BCE divested itself of Nortel. Unfortunately, the collapse in demand for Nortel products in the wake of the bursting of the dot-com bubble, which occurred after aggressive spending on acquisitions and hiring under CEO John Roth, required Nortel to trim its workforce from 96,000 (in 2001) to 35,000 people (as of 2006). [6]

See also

Related Research Articles

Nortel Networks Corporation (Nortel), formerly Northern Telecom Limited, was a Canadian multinational telecommunications and data networking equipment manufacturer headquartered in Ottawa, Ontario, Canada. It was founded in Montreal, Quebec in 1895 as the Northern Electric and Manufacturing Company. Until an antitrust settlement in 1949, Northern Electric was owned mostly by Bell Canada and the Western Electric Company of the Bell System, producing large volumes of telecommunications equipment based on licensed Western Electric designs.

<span class="mw-page-title-main">Digital Multiplex System</span> Electronic telephone switch

Digital Multiplex System (DMS) is the name shared among several different telephony product lines from Nortel Networks for wireline and wireless operators. Among them are the DMS-1 Rural/Urban digital loop carrier, the DMS-10 telephone switch, the DMS SuperNode family of telephone switches, and the S/DMS optical transmission system.

Automatic Electric Company was an American telephone equipment supplier primarily for independent telephone companies in North America, but also had a worldwide presence. With its line of automatic telephone exchanges, it was also a long-term supplier of switching equipment to the Bell System, starting in 1919. The company was the largest manufacturing unit of the Automatic Electric Group. In 1955, the company was acquired by General Telephone and Electronics (GT&E). After numerous reorganization within GTE, the companies assets it came under the umbrella of Lucent in the 1990s, and subsequently part of Nokia.

<span class="mw-page-title-main">Aastra Technologies</span> Telecommunications company

Aastra Technologies Limited, formerly headquartered in Concord, Ontario, Canada, made products and systems for accessing communication networks, including the Internet. Its products included residential and business telephone terminals, screen telephones, Enterprise private branch exchanges (PBX), network access terminals and high-quality digital video encoders, decoders and gateways. Residential telephone equipment was sold in the United States as Bell equipment by Sonecor brand, which represented Southern New England Telecommunications.

<span class="mw-page-title-main">DMS-100</span> Nortel telecom switch

The DMS-100 is a member of the Digital Multiplex System (DMS) product line of telephone exchange switches manufactured by Northern Telecom. Designed during the 1970s and released in 1979, it can control 100,000 telephone lines.

SP-1 was the name of a computerized telephone exchange manufactured by Northern Electric in Canada. It was introduced in 1971

A Class-5 telephone switch is a telephone exchange in the public switched telephone network (PSTN) that directly serves subscribers and manages subscriber calling features. Class-5 services include basic dial-tone, calling features, and additional digital and data services to subscribers connected to a local loop.

<span class="mw-page-title-main">Standard Telephones and Cables</span> British manufacturer of telecom equipment

Standard Telephones and Cables Ltd was a British manufacturer of telephone, telegraph, radio, telecommunications, and related equipment. During its history, STC invented and developed several groundbreaking new technologies including pulse-code modulation (PCM) and optical fibres.

Meridian Mail is one of the early all-digital voicemail systems, running on Meridian1 / SL-1 digital PBX systems from Northern Telecom.

<span class="mw-page-title-main">Nortel Meridian</span>

Nortel Meridian is a private branch exchange telephone switching system. It provides advanced voice features, data connectivity, LAN communications, computer telephony integration (CTI), and information services for communication applications ranging from 60 to 80,000 lines.

<span class="mw-page-title-main">Nortel Norstar</span> Office telephone system

The Nortel Norstar, previously the Meridian Norstar, was a small and medium-sized business digital key telephone system introduced by Nortel and later sold to Avaya. It featured automatic call distribution, and supported up to 192 extensions. In the United Kingdom it was sold by British Telecom, rebadged as the BT Norstar.

The 1-Meg Modem in telecommunications was a DSL modem created by Nortel which conforms to the ADSL Lite standard. The 1-Meg Modem was the first xDSL modem to gain approval and registration under FCC Part 68 Rules.

Stored program control (SPC) is a telecommunications technology for telephone exchanges. Its characteristic is that the switching system is controlled by a computer program stored in a memory in the switching system. SPC was the enabling technology of electronic switching systems (ESS) developed in the Bell System in the 1950s, and may be considered the third generation of switching technology. Stored program control was invented in 1954 by Bell Labs scientist Erna Schneider Hoover, who reasoned that computer software could control the connection of telephone calls.

The No. 4 Electronic Switching System (4ESS) is a class 4 telephone electronic switching system that was the first digital electronic toll switch introduced by Western Electric for long-distance switching. It was introduced in Chicago in January 1976, to replace the 4A crossbar switch. The last of the 145 systems in the AT&T network was installed in 1999 in Atlanta. Approximately half of the switches were manufactured in Lisle, Illinois, and the other half in Oklahoma City, Oklahoma. At the time of the Bell System divestiture, most of the 4ESS switches became assets of AT&T as part of the long-distance network, while others remained in the RBOC networks. Over 140 4ESS switches remained in service in the United States in 2007.

Amos Edward Joel Jr. was an American electrical engineer, known for several contributions and over seventy patents related to telecommunications switching systems.

CT Connect is a software product that allows computer applications to monitor and control telephone calls. This monitoring and control is called computer-telephone integration, or CTI. CT Connect implements CTI by providing server software that supports the CTI link protocols used by a range of telephone systems, and client software that provides an application programming interface (API) for telephony functions.

<span class="mw-page-title-main">Telephone exchange</span> Interconnects telephones for calls

A telephone exchange, telephone switch, or central office is a telecommunications system used in the public switched telephone network (PSTN) or in large enterprises. It interconnects telephone subscriber lines or virtual circuits of digital systems to establish telephone calls between subscribers.

TOPS - Traffic Operator Position System is a computerized operator telephone switchboard designed by Bell-Northern Research Labs for the SP-1 4 Wire Switch in the early 1970s and still widely used today by toll and directory-assistance operators. The terminals known as 'TOPS Positions' are usually connected to Nortel DMS-100 and DMS-200 telephone switches.

Timeline of major events for Nortel.

References

  1. Nortel Networks (2009). "Nortel History - 1990 to 1999". Nortel Networks. Archived from the original on September 30, 2009. Retrieved April 18, 2009.
  2. 1 2 Massey, David (2005). "Northern Electric - A Brief History". Bell System Memorial. The Porticus Centre. Archived from the original on April 26, 2009. Retrieved April 18, 2009.
  3. Nortel Networks (2007). "Nortel History - 1940 to 1949". Archived from the original on November 13, 2006. Retrieved September 17, 2007.
  4. Gaskins, Robert (April 20, 2012). Sweating Bullets: Notes about Inventing PowerPoint. Vinland Books. ISBN   978-0-9851424-2-1.
  5. Penny and Williams (1982)
  6. "Corporate Information - Nortel History - 1990 to 1999". Nortel. Archived from the original on September 30, 2009. Retrieved August 14, 2010.