Columbia (1850 sidewheeler)

Last updated
Steamboat Columbia ad 1851.jpg
Advertisement for steamer Columbia, July 17, 1851
NameColumbia (sidewheel steamboat)
OwnerFrost, Adair, Leonards and Green [1]
Routelower Columbia River and lower Willamette River
BuilderThomas Goodwin and George Hewitt [1]
Launched1850, at Astoria, Oregon [1]
TypeShallow draft inland passenger/freight, wooden construction
Length90  ft (27.4  m) [1]
Beam16  ft (4.9  m) [1]
DepthAbout 4  ft (1.2  m) depth of hold [2]
Installed powerSteam engines, 8 in (20 cm) bore by 24 in (61 cm) stroke [1]
PropulsionSidewheels
Speed4 mi (6.4 km) per hour or a little more [3]
NotesDismantled 1852, engines to sidewheeler Fashion [3]

The Columbia was a steamboat built at Astoria, Oregon in 1850. It was the first steamboat built in the Oregon Territory, and the first to establish regular service on the lower Columbia and Willamette rivers. This vessel should not be confused with the many other craft with the same or a similar name, including in particular at least four other vessels named Columbia which ran on the Columbia river or its tributaries.

Contents

Owners

Columbia was built at upper Astoria, Oregon. One source states that the vessel was built by Gen. James Adair (1808–1888) and James Frost. [4] John Adair was the first collector of customs for the Oregon Territory. [5] Adair was a lawyer with political connections, and later was friend and advisor to Joseph Lane, one of Oregon's first senators. [6] Frost, originally from Missouri, had come out to Oregon with a pioneer rifle regiment. [7] He had been a sutler in this regiment, and his brother was quartermaster. When the American Civil War began, he returned to Missouri, where he served with the rebel militia. [7] He lived in St. Louis, Missouri after the war. [7] Another source states that Columbia was built by Thomas Goodwin and George Hewitt for Adair, Frost, and two others, whose names are given as Leonards and Green. [1]

Design

Columbia has been described as odd-shaped and clumsy-looking, and double-ended like a ferry. [7] The vessel was built of wood and powered by sidewheels, which were driven by engines which originally came from France. James Frost had journeyed to San Francisco to purchase the engines, which were shipped up to Astoria. [4] [7] Another source states that the chief engineer, Thomas V. Smith, went to San Francisco to purchase engines. [2]

First trip upriver

It is to be regretted that there was no photo artist in those days to make a truthful picture of this poor sidewheeler as she struggled and panted against tide and current, doing her four or five miles an hour under favorable circumstances ... .

—Dan O'Neill, a captain of Columbia [8]

Columbia began its first trip up the Columbia on the morning of July 3, 1850, with James Frost acting as captain. [3] No one on board knew where the channel was, and the steamer's progress was slow. To act as pilots, Frost hired two young people of the Coast Salish who had been fishing on the river. By the end of the first day, they had travelled fifty miles, and Frost, not wanting to risk the vessel in the dark, tied up to the riverbank. [3] The next morning, July 4, 1850, the steamer cast off again and proceeded upstream, arriving at Portland, Oregon (then only a small settlement) at 3:00 p.m. [4] After staying at Portland for about two hours, Columbia then proceeded on to Oregon City, arriving there at 8:00 p.m., where there was a celebration of the vessel's arrival. [2] [4] It had taken 26 hours to make the trip. [7]

Later operations

Everything in connection with her was of the miniature order excepting the rates of fare. For the luxury of a trip from Astoria to Portland the modest sum of $25 was asked and cheerfully paid, a considerable difference to the present 'cut rates' of 25 cents, by boat or railroad cars. During the time I was thus employed quite a number who subsequently became millionaires were passengers, among them being H. W. Corbett, John Green, Henry Leonard and others; and also, at one time, a party of school marms who had come out from the East to teach school in Oregon.

—Dan O'Neill [8]

After a second trip to Oregon City, Columbia began to run regular trips between Oregon City and Astoria, connecting with the ocean steamer coming up from San Francisco that was owned by the Pacific Mail Steamship Company. [3] Columbia was "no floating palace". [3] Fares were $25 per person either way, with passengers to furnish their own food, which would be eaten from baskets or on blankets spread out on the deck or a table in the small cabin. Space was allocated for sleeping at night on the deck, for which there was no additional charge. [3] Often there was standing room only on the boat. [2]

Once gold strikes began in the west, fares could be paid in gold. One early passenger, John McCracken, reported that he once paid two ounces of gold dust for travel on the Columbia from Astoria to Portland. He had to sleep on the upper deck, the vessel was crowded, and the trip took two days. [7] The boat did not run at night. Columbia completed with the keelboats, bateaux and sailing vessels that had provided the transport on the river, by towing barges, transporting immigrants who had reached the Cascade Rapids and general steamboat work. [3]

For six months Columbia was the only steamboat on the river, until the Lot Whitcomb was launched on December 25, 1850. Lot Whitcomb was a vessel far superior to Columbia. The owners of Columbia dropped their fare to $15. [3] According to one source, Mills, the backers of Lot Whitcomb refused to meet this, believing, correctly, that people would pay more to ride their superior steamer. [3] Another source, Corning, states that Lot Whitcomb forced the Columbia's fare down to $12. [4]

Disposition

By December 1853, Fashion was running with Columbia's engines, as this advertisement shows. Fashion (Columbia river steamboat) advertisement 1850s.jpg
By December 1853, Fashion was running with Columbia's engines, as this advertisement shows.

The sources disagree as to the disposition of the vessel. Corning states that by June 1856, Columbia had made over 100 runs to Portland, and earned over $500,000 for her owners. [4] Mills gives 1852 as the year in which the vessel was dismantled, as does the Lewis and Dryden Marine History. [2] [3] Sources agree, however, that the engines of Columbia were installed in the sidewheeler Fashion, which was built in 1853. [2] [3] After the engines had been removed, Columbia's hull was swept downstream and lost during a spring freshlet. [2]

Notes

  1. 1 2 3 4 5 6 7 Affleck, Century of Paddlewheelers, at 11 and 13.
  2. 1 2 3 4 5 6 7 Wright, ed., Lewis and Dryden Marine History, at 28-29, and 38.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 Mills, Sternwheelers up Columbia, at 16-18, 19, 24, 28, 121, 170, 192.
  4. 1 2 3 4 5 6 Corning, Willamette Landings, at 23-24.
  5. Horner, Oregon: Her History, at 148.
  6. Hines, Illustrated History of the State of Oregon, at 657.
  7. 1 2 3 4 5 6 7 Bancroft, History of Oregon 1848-1888, at 255-56
  8. 1 2 O'Neill recollections, published in Lewis and Dryden Marine History, at 29.

Related Research Articles

<i>Lot Whitcomb</i> (sidewheeler) First steam-powered craft built on the Willamette River in Oregon, United States

Launched in 1850, Lot Whitcomb, later known as Annie Abernathy, was the first steam-powered craft built on the Willamette River in the U.S. state of Oregon. She was one of the first steam-driven vessels to run on the inland waters of Oregon, and contributed to the rapid economic development of the region.

<i>Idaho</i> (sidewheeler)

The sidewheeler Idaho was a steamboat that ran on the Columbia River and Puget Sound from 1860 to 1898. There is some confusion as to the origins of the name; many historians have proposed it is the inspiration for the name of the State of Idaho. Considerable doubt has been cast on this due to the fact that it is unclear if the boat was named before or after the idea of 'Idaho' as a territory name was proposed. John Ruckel also allegedly stated he had named the boat after a Native American term meaning 'Gem of the Mountains' he got from a mining friend from what is now Colorado territory. This steamer should not be confused with the many other vessels of the same name, including the sternwheeler Idaho built in 1903 for service on Lake Coeur d'Alene and the steamship Idaho of the Pacific Coast Steamship Line which sank near Port Townsend, Washington.

Willamette Chief

Willamette Chief was a sternwheel steamboat built in 1874 for the Willamette River Navigation Company.

<i>Echo</i> (sternwheeler 1865)

Echo was a sternwheel steamboat that operated on the Willamette River from about 1865 to 1873 and was one of the first steamboats to carry what was then considered a large cargo out of Eugene, Oregon.

<i>Multnomah</i> (1851 sidewheeler)

The Multnomah was one of the first steamboats to operate on the Willamette and Yamhill rivers. This vessel should not be confused with the Multnomah, a steamboat built in Portland, Oregon in 1885, which was larger and of a much different design.

<i>Shoalwater</i> (sidewheeler 1852)

The steamboat Shoalwater was the sixth steamer to operate on the upper Willamette River, which refers to the part of the river above Willamette Falls at Oregon City. In a short career of six years, Shoalwater was renamedFenix, Franklin, and Minnie Holmes. Shoalwater was the first steamboat in Oregon to suffer a boiler explosion, although no fatalities resulted.

<i>Governor Grover</i> (sternwheeler) Willamette River sternwheel steamboat

Governor Grover was a sternwheel steamboat that ran on the Willamette River during the 1870s. Because of the completion of the Willamette Locks in late 1872, it was possible for vessels such as Governor Grover to be built in Portland, Oregon and then readily navigate the Willamette above Willamette Falls.

<i>Jennie Clark</i> American steamboat

Jennie Clark, also seen spelled Jenny Clark, was the first sternwheel-driven steamboat to operate on the rivers of the Pacific Northwest, including British Columbia. This vessel was commonly known as the Jennie when it was in service. The design of the Jennie Clark set a pattern for all future sternwheel steamboats built in the Pacific Northwest and in British Columbia.

<i>Wallamet</i> (1853 sidewheeler)

Wallamet was a sidewheel-driven steamboat that operated on the Willamette and Columbia rivers in Oregon and later on the Sacramento and San Joaquin rivers in California. Built in a Mississippi river style that was not suited to the conditions of these rivers, and suffering from construction defects, Wallamet was not a financially successful vessel. The name of this vessel is often seen spelled as Willamette.

<span class="mw-page-title-main">People's Transportation Company</span> Defunct steamboat company that operated in Oregon, United States

The People's Transportation Company operated steamboats on the Willamette River and its tributaries, the Yamhill and Tualatin rivers, in the State of Oregon from 1862 to 1871. For a brief time this company operated steamers on the Columbia River, and for about two months in 1864, the company operated a small steamer on the Clackamas River.

<i>Oregon</i> (sidewheeler 1852)

Oregon was a side-wheel driven steamboat that operated on the Willamette River in the state of Oregon from 1852 to 1854. The steamer was not economically successful and became a total loss by sinking after a short career.

<i>Wenat</i> (sternwheeler)

Wenat was a stern-wheel steamboat that, under the name Swan, was built and operated, briefly, on the Tualatin River, in the state of Oregon. In 1858, Swan was sold, moved to the lower Willamette River, renamed Cowlitz, and placed on a route between Portland, Oregon the Cowlitz River.

<i>Minnehaha</i> (sternwheeler) Sternwheeler steamboat

Minnehaha was a sternwheel-driven steamboat which was built in 1866 on Oswego Lake, then known as Sucker Lake, in Oregon, United States. Minnehaha was later transferred to the Willamette and Columbia rivers where it operated for the first part of the 1870s.

<i>Dayton</i> (sternwheeler)

Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.

<i>Albany</i> (1868 sternwheeler)

Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.

<span class="mw-page-title-main">George Anson Pease</span>

George Anson Pease (1830-1919) was a well-known steamboat captain in the Pacific Northwest region on the United States, who was active from the earliest days of steamboat navigation on the Willamette River in the 1850s. He worked in various roles until the early 1900s, commanding numerous vessels during that time. During a flood in 1861, while in command of the sternwheeler Onward, Pease rescued 40 people from a flood in the area of Salem, Oregon.

<i>Telephone</i> (sternwheeler)

Telephone was a sternwheel-driven steamboat built in 1884 by Captain Uriah Bonsor "U.B." Scott for service on the Columbia River. Reputedly the fastest steamboat in the world in its time, Telephone served on the Columbia River and San Francisco Bay. Telephone was rebuilt at least twice. The first time was after a fire in 1887 which nearly destroyed the vessel. The reconstructed and much larger second vessel was sometimes referred to as Telephone No. 2. The third vessel, Telephone No. 3, built in 1903 and using components from the second steamer was larger but little used during its time on the Columbia river.

<i>Orient</i> (sternwheeler)

Orient was a light-draft sternwheel-driven steamboat built in 1875 for the Willamette River Transportation Company, a concern owned by pioneer businessman Ben Holladay. Shortly after its completion, it was acquired by the Oregon Steam Navigation Company. Orient was a near-twin vessel of a steamer built at the same time, the Occident.

<i>Governor Newell</i> (sternwheeler)

Governor Newell was a sternwheel-driven steamboat that operated from 1883 to 1902 in the Pacific Northwest.

<i>Lucea Mason</i>

Lucea Mason was a steamboat that operated from 1883 to 1891 on the Lewis, Columbia, and lower Willamette rivers. This vessel was occasionally referred to as the Lucia Mason. Lucea Mason was reported to have sunk a lot but nevertheless made a great deal of money for its owners.

References

Further reading