Ferrari 365 GTC/4

Last updated
Ferrari 365 GTC/4
Paris - Bonhams 2015 - Ferrari 365 GTC 4 Berlinetta - 1972 - 002.jpg
1972 365 GTC/4
Overview
Production19711972
505 produced
Assembly Modena, Italy
Designer Filippo Sapino at Pininfarina
Body and chassis
Class Grand tourer
Body style 2+2 coupé
Layout Front-engine, rear-wheel-drive
Related Ferrari 365 GTB/4 "Daytona"
Powertrain
Engine 4.4 L F 101 AC V12
Transmission 5-speed manual
Dimensions
Wheelbase 2,500 mm (98.4 in)
Length4,550 mm (179.1 in)
Width1,780 mm (70.1 in)
Height1,270 mm (50.0 in)
Kerb weight 1,450 kg (3,197 lb)
Chronology
Predecessor Ferrari 365 GTC

The Ferrari 365 GTC/4 (Type F101) is a 2+2 grand tourer produced by Ferrari from 1971 to 1972. It was based on the chassis of the Ferrari 365 GTB/4 "Daytona", and in the very short two-year production run 505 examples of the GTC/4 were produced. Its chassis and drivetrain, however, were carried over mostly unaltered (apart from a wheelbase stretch to provide more satisfying rear seat room) on its successor, the 1972 365 GT4 2+2.

Contents

Design

The GTC/4's coupé bodywork by Pininfarina enclosed two front and two rear seats. The rear seats were small and the slanting rear window limited rear headroom. So it can be seen to replace the two-seat 365 GTC that had been discontinued in 1970. [1] [2]

With its wedge shape, fastback silhouette, sharp creases and hidden headlamps the GTC/4's styling clearly reflects the 365 GTB/4 "Daytona" it was based on. Power steering, electric windows and air conditioning were standard. The cabin was upholstered in mixed leather and tartan fabric, unique to this model and unusual for a Ferrari, with full leather upholstery an option. [1]

Ferrari offered 48 different factory paint colors in the years that the 365 GTC/4 was produced. These colors were available on all Ferrari models at that time: the 365 GTC/4, 365 GTB/4, and Dino 246. It is unknown how many of these colors were actually used on 365 GTC/4 models. In addition, Ferrari would allow any special order paint color a well-heeled buyer desired. Regardless of exterior paint color, all 365 GTC/4s received a matte-black tail light panel treatment. [3]

Specifications

The 365 GTC/4 shared the chassis and engine block as the 365 GTB/4 Daytona, riding on the same wheelbase and suspension. Many changes were made to make it a more comfortable grand tourer than its two-seat predecessor and sibling. These included softer spring rate and a hydraulic power steering.

Rear view of a US-specification 1972 365 GTC/4 1972 Ferrari 365GTC4 red.jpg
Rear view of a US-specification 1972 365 GTC/4

The chassis was a tubular spaceframe, mated to a steel body with aluminium doors and bonnets; as was customary in this period, the bodies were made and finished by Pininfarina in Turin, then sent to Ferrari in Modena for the assembly. The suspension system used transverse A-arms, coil springs coaxial with the shock absorbers (double at the rear), and anti-roll bars on all four corners. Wheels were cast magnesium on Rudge knock-off hubs, while Borrani wire wheels were optional; the braking system used vented discs front and rear.

The engine was a Tipo F 101 AC 000 Colombo V12, displacing 4,390 cc (4.4 L; 267.9 cu in). [1] Engine block and cylinder heads were aluminium alloy, with cast iron pressed-in sleeves; chain-driven two overhead camshafts per bank (four in total, as noter by the "4" in the model designation) commanded two valves per cylinder.

The V12 was detuned to 340 PS (250 kW; 335 bhp) from the Daytona, to provide a more tractable response suited to a GT-oriented Ferrari. In place of the Daytona's downdraft setup, six twin-choke side-draft Weber carburetors were used, whose lower profile made possible the car's lower and sloping hood line. [1]

365 GTC/4 engine bay Ferrari 365 GTC 4 Motor.jpg
365 GTC/4 engine bay

The 5-speed all-synchronised manual transmission was bolted to the engine, another difference from the Daytona which used a transaxle. However the set back placement of the engine and transmission still allowed the car to achieve a near perfect 51:49 weight distribution. The gearbox was rigidly connected to the alloy housing of the rear differential through a torque tube.

Models for export to the United States were fitted with three-point seat belts, side markers and a number of engine modifications to comply with Federal emission standards, including air injection, carbon canister for evaporative emission control and a different exhaust system. On US-specification cars power was down to 320 PS (235 kW; 316 bhp).

Related Research Articles

<span class="mw-page-title-main">Dino (marque)</span> Motor vehicle

Dino was a marque best known for mid-engined, rear-drive sports cars produced by Ferrari from 1957 to 1976. The marque came into existence in late 1956 with a front-engined Formula Two racer powered by a brand new Dino V6 engine. The name Dino was used for some models with engines smaller than 12 cylinders, it was an attempt by the company to offer a relatively low-cost sports car. The Ferrari name remained reserved for its premium V12 and flat-12 models until 1976, when "Dino" was retired in favour of full Ferrari branding.

<span class="mw-page-title-main">Ferrari Berlinetta Boxer</span> Motor vehicle

The Ferrari Berlinetta Boxer (BB) is series of sports cars produced by Ferrari in Italy between 1973 and 1984. The BB was designed by Leonardo Fioravanti at Pininfarina. The first BB model, the 365 GT4 BB, replaced the front engined Daytona and was the first in a series of road-going Ferraris equipped with a mid-mounted flat-twelve engine. It was also the first mid-engined road-car to bear the Ferrari name and the Cavallino Rampante logo. The 365 GT4 BB was succeeded in 1976 by the BB 512, equipped with a larger displacement engine, then by the fuel-injected BB 512i in 1981. The series was discontinued in 1984 when the BB 512i was replaced by the Testarossa, which used a revised version of the flat-twelve engine.

<span class="mw-page-title-main">Ferrari 456</span> Four seat grand tourer manufactured by Ferrari

The Ferrari 456 and 456M are front-engine grand tourers which were produced by Ferrari from 1992 to 2003. The 456 was a replacement for the front-engine 412 as the company's V12-powered four seater. The updated 456M, which was the last Ferrari model to use pop-up headlamps, was replaced in 2004 by the 612 Scaglietti.

<span class="mw-page-title-main">Ferrari 308 GTB/GTS</span> Motor vehicle

The Ferrari 308 GTB berlinetta and targa topped 308 GTS are V8 mid-engined, two-seater sports cars manufactured by the Italian company Ferrari from 1975 until 1985. The 308 replaced the Dino 246 GT and GTS in 1975 and was updated as the 328 GTB/GTS in 1985. The similar 208 GTB and GTS were equipped with a smaller, initially naturally aspirated and later turbocharged, two-litre engine, and were sold mainly in Italy.

<span class="mw-page-title-main">Ferrari 275</span> Motor vehicle

The Ferrari 275 is a series of front-engined V12-powered grand touring automobiles with two-seater coupé and spider bodies produced by Ferrari between 1964 and 1968. The first 275 series cars were powered by a 3.3 L (3286 cc) overhead camshaft Colombo 60° V12 engine producing 260–320 hp (190–240 kW). An updated 275 GTB/4 was introduced in 1966, with a revised four overhead camshaft engine producing 300 hp (220 kW). The 275 series were the first road-going Ferraris equipped with a transaxle and independent rear suspension.

<span class="mw-page-title-main">Ferrari Daytona</span> Motor vehicle

The Ferrari Daytona is a two-seat grand tourer produced by Ferrari from 1968 to 1973. It was introduced at the Paris Auto Salon in 1968 to replace the 275 GTB/4, and featured the 275's Colombo V12 bored-out to 4,390 cc. It was offered in berlinetta and spyder forms. The car came in two variants: the 365 GTB/4 coupe, and the 365 GTS/4 convertible.

<span class="mw-page-title-main">Ferrari Mondial</span> Motor vehicle

The Ferrari Mondial is a mid-engined, V8, grand tourer manufactured and marketed by Ferrari between 1980 and 1993 – with styling by Pininfarina and bodywork by Carrozzeria Scaglietti.

<span class="mw-page-title-main">Ferrari 365 GT4 2+2, 400 and 412</span> Motor vehicle

The Ferrari 365 GT4 2+2, Ferrari 400 and Ferrari 412 are front-engined V12 2+2 grand tourers made by Italian manufacturer Ferrari between 1972 and 1989. The three cars are closely related, using the same body, chassis and engine evolved over time.

<span class="mw-page-title-main">Ferrari 550</span> Grand tourer produced by Ferrari

The Ferrari 550 Maranello is a front-engine V12 2-seat grand tourer built by Ferrari from 1996 to 2002. The 550 Maranello marked Ferrari's return to a front-engine, rear-wheel drive layout for its 2-seater 12-cylinder model, 23 years after the 365 GTB/4 Daytona had been replaced by the mid-engined Berlinetta Boxer.

<span class="mw-page-title-main">Ferrari Colombo engine</span> Reciprocating internal combustion engine

The Ferrari Colombo Engine was a petrol fueled, water cooled, carburetted 60° V12 engine designed by Gioacchino Colombo and produced in numerous iterations by Italian automaker Ferrari between 1947 and 1988. The maker's first homegrown engine, its linear successor is the Lampredi V12, which it far outlived, the last Lampredi being made in 1959.

<span class="mw-page-title-main">Ferrari America</span> Motor vehicle

Ferrari America is a series of top-end Ferrari models built in the 1950s and 1960s. They were large grand touring cars with the largest V12 engines and often had custom bodywork. All America models used a live axle in the rear, were front-engined, and had worm and sector steering.

<span class="mw-page-title-main">Ferrari 250</span> Series of sports cars and grand tourers built by Ferrari from 1952 to 1964

The Ferrari 250 is a series of sports cars and grand tourers built by Ferrari from 1952 to 1964. The company's most successful early line, the 250 series includes many variants designed for road use or sports car racing. 250 series cars are characterized by their use of a 3.0 L (2,953 cc) Colombo V12 engine designed by Gioacchino Colombo. They were replaced by the 275 and 330 series cars.

<span class="mw-page-title-main">Ferrari 599</span> Grand Tourer produced by Ferrari from 2006–2012 as a successor to the 575M

The Ferrari 599 GTB Fiorano is a grand tourer produced by the Italian automobile manufacturer Ferrari. It served as the brand's front-engined, two-seat model, replacing the 575M Maranello in 2006 as a 2007 model, and was later replaced for the 2013 model year by the F12berlinetta.

The Ferrari 330 was a series of V12 powered automobiles produced by Ferrari in 2+2 GT Coupé, two-seat Berlinetta, spyder, and race car versions between 1963 and 1968. The name "330" refers to the approximate displacement of each single cylinder in cubic centimeters.

<span class="mw-page-title-main">Ferrari 365</span> Motor vehicle

The Ferrari 365 is a large front-engine, rear-wheel-drive 2- and 2+2-seater grand tourer produced by Ferrari. Introduced at the 1966 Geneva Motor Show, it replaced the 330 and 500 Superfast.

<span class="mw-page-title-main">Ferrari 250 GT Lusso</span> Motor vehicle

The Ferrari 250 GT Berlinetta Lusso is a GT car which was manufactured by Italian automaker Ferrari from 1962 to 1964. Sometimes known as the GTL, GT/L or just Lusso, it is larger and more luxurious than the 250 GT Berlinetta. The 250 GT Lusso, which was not intended to compete in sports car racing, is considered to be one of the most elegant Ferraris.

<span class="mw-page-title-main">Ferrari F12</span> Grand Tourer produced by Ferrari as the successor to the 599 GTB

The Ferrari F12berlinetta is a front mid-engine, rear-wheel-drive grand tourer produced by Italian automobile manufacturer Ferrari. The F12berlinetta debuted at the 2012 Geneva Motor Show, and replaced the 599 grand tourer. The naturally aspirated 6.3 litre Ferrari V12 engine used in the F12berlinetta has won the 2013 International Engine of the Year Award in the Best Performance category and Best Engine above 4.0 litres. The F12berlinetta was named "The Supercar of the Year 2012" by car magazine Top Gear. The F12berlinetta was replaced by the 812 Superfast in early 2017.

<span class="mw-page-title-main">Dino 206 GT and 246 GT</span> V6 mid-engined sports cars produced by Ferrari and sold under the Dino marque between 1967 and 1974.

The Dino 206 GT, 246 GT and 246 GTS are V6 mid-engined sports cars produced by Ferrari and sold under the Dino marque between 1967 and 1974.

<span class="mw-page-title-main">Ferrari 365 P Berlinetta Speciale</span> 1966 concept sports car

The Ferrari 365 P Berlinetta Speciale was a concept sports car designed and produced by Pininfarina and Ferrari in 1966. It featured a mid-engined layout of a donor racing car chassis and three-seat arrangement with a central driving position, as later popularised on McLaren F1. It was the first purpose-built, mid-engined, road-going Ferrari-branded car. Other similar Ferraris at that time were road-usable race cars like the 1965 250 LM 'Speciale'.

References

  1. 1 2 3 4 "365 GTC4". Ferrari official site - Past models. Ferrari S.p.A. Retrieved 2014-09-23.
  2. "Ferrari 365 GTC4". Road & Track. July 1972. Retrieved 2014-09-23.
  3. "365gt4.com". 365gt4.com.

Further reading