Josephson effect

Last updated
Josephson junction array chip developed by the National Institute of Standards and Technology as a standard volt NISTvoltChip.jpg
Josephson junction array chip developed by the National Institute of Standards and Technology as a standard volt

In physics, the Josephson effect is a phenomenon that occurs when two superconductors are placed in proximity, with some barrier or restriction between them. The effect is named after the British physicist Brian Josephson, who predicted in 1962 the mathematical relationships for the current and voltage across the weak link. [1] [2] It is an example of a macroscopic quantum phenomenon, where the effects of quantum mechanics are observable at ordinary, rather than atomic, scale. The Josephson effect has many practical applications because it exhibits a precise relationship between different physical measures, such as voltage and frequency, facilitating highly accurate measurements.

Contents

The Josephson effect produces a current, known as a supercurrent, that flows continuously without any voltage applied, across a device known as a Josephson junction (JJ). These consist of two or more superconductors coupled by a weak link. The weak link can be a thin insulating barrier (known as a superconductor–insulator–superconductor junction, or S-I-S), a short section of non-superconducting metal (S-N-S), or a physical constriction that weakens the superconductivity at the point of contact (S-c-S).

Josephson junctions have important applications in quantum-mechanical circuits, such as SQUIDs, superconducting qubits, and RSFQ digital electronics. The NIST standard for one volt is achieved by an array of 20,208 Josephson junctions in series. [3]

History

The DC Josephson effect had been seen in experiments prior to 1962, [4] but had been attributed to "super-shorts" or breaches in the insulating barrier leading to the direct conduction of electrons between the superconductors.

In 1962, Brian Josephson became interested into superconducting tunneling. He was then 23 years old and a second-year graduate student of Brian Pippard at the Mond Laboratory of the University of Cambridge. That year, Josephson took a many-body theory course with Philip W. Anderson, a Bell Labs employee on sabbatical leave for the 1961–1962 academic year. The course introduced Josephson to the idea of broken symmetry in superconductors, and he "was fascinated by the idea of broken symmetry, and wondered whether there could be any way of observing it experimentally". Josephson studied the experiments by Ivar Giaever and Hans Meissner, and theoretical work by Robert Parmenter. Pippard initially believed that the tunneling effect was possible but that it would be too small to be noticeable, but Josephson did not agree, especially after Anderson introduced him to a preprint of "Superconductive Tunneling" by Cohen, Falicov, and Phillips about the superconductor-barrier-normal metal system. [5] [6] :223–224

Josephson and his colleagues were initially unsure about the validity of Josephson's calculations. Anderson later remembered:

We were all—Josephson, Pippard and myself, as well as various other people who also habitually sat at the Mond tea and participated in the discussions of the next few weeks—very much puzzled by the meaning of the fact that the current depends on the phase.

After further review, they concluded that Josephson's results were valid. Josephson then submitted "Possible new effects in superconductive tunnelling" to Physics Letters in June 1962 [1] . The newer journal Physics Letters was chosen instead of the better established Physical Review Letters due to their uncertainty about the results. John Bardeen, by then already Nobel Prize winner, was initially publicly skeptical of Josephson's theory in 1962, but came to accept it after further experiments and theoretical clarifications. [6] :222–227 See also: John Bardeen § Josephson Effect controversy.

In January 1963, Anderson and his Bell Labs colleague John Rowell submitted the first paper to Physical Review Letters to claim the experimental observation of Josephson's effect "Probable Observation of the Josephson Superconducting Tunneling Effect". [7] These authors were awarded patents on the effects that were never enforced, but never challenged.[ citation needed ]

Before Josephson's prediction, it was only known that single (i.e., non-paired) electrons can flow through an insulating barrier, by means of quantum tunneling. Josephson was the first to predict the tunneling of superconducting Cooper pairs. For this work, Josephson received the Nobel Prize in Physics in 1973. [8] John Bardeen was one of the nominators. [6] :230

Applications

The electrical symbol for a Josephson junction Josephson junction symbol.svg
The electrical symbol for a Josephson junction

Types of Josephson junction include the φ Josephson junction (of which π Josephson junction is a special example), long Josephson junction, and superconducting tunnel junction. A "Dayem bridge" is a thin-film variant of the Josephson junction in which the weak link consists of a superconducting wire with dimensions on the scale of a few micrometres or less. [9] [10] The Josephson junction count of a device is used as a benchmark for its complexity. The Josephson effect has found wide usage, for example in the following areas.

SQUIDs, or superconducting quantum interference devices, are very sensitive magnetometers that operate via the Josephson effect. They are widely used in science and engineering.

In precision metrology, the Josephson effect provides an exactly reproducible conversion between frequency and voltage. Since the frequency is already defined precisely and practically by the caesium standard, the Josephson effect is used, for most practical purposes, to give the standard representation of a volt, the Josephson voltage standard.

Single-electron transistors are often constructed of superconducting materials, allowing use to be made of the Josephson effect to achieve novel effects. The resulting device is called a "superconducting single-electron transistor". [11]

The Josephson effect is also used for the most precise measurements of elementary charge in terms of the Josephson constant and von Klitzing constant which is related to the quantum Hall effect.

RSFQ digital electronics is based on shunted Josephson junctions. In this case, the junction switching event is associated to the emission of one magnetic flux quantum that carries the digital information: the absence of switching is equivalent to 0, while one switching event carries a 1.

Josephson junctions are integral in superconducting quantum computing as qubits such as in a flux qubit or others schemes where the phase and charge act as the conjugate variables. [12]

Superconducting tunnel junction detectors (STJs) may become a viable replacement for CCDs (charge-coupled devices) for use in astronomy and astrophysics in a few years. These devices are effective across a wide spectrum from ultraviolet to infrared, and also in x-rays. The technology has been tried out on the William Herschel Telescope in the SCAM instrument.

The Josephson effect has also been observed in superfluid helium quantum interference devices (SHeQUIDs), the superfluid helium analog of a dc-SQUID. [13]

The Josephson equations

Diagram of a single Josephson junction. A and B represent superconductors, and C the weak link between them. Single josephson junction.svg
Diagram of a single Josephson junction. A and B represent superconductors, and C the weak link between them.

The Josephson effect can be calculated using the laws of quantum mechanics. A diagram of a single Josephson junction is shown at right. Assume that superconductor A has Ginzburg–Landau order parameter , and superconductor B , which can be interpreted as the wave functions of Cooper pairs in the two superconductors. If the electric potential difference across the junction is , then the energy difference between the two superconductors is , since each Cooper pair has twice the charge of one electron. The Schrödinger equation for this two-state quantum system is therefore: [14]

where the constant is a characteristic of the junction. To solve the above equation, first calculate the time derivative of the order parameter in superconductor A:

and therefore the Schrödinger equation gives:

The phase difference of Ginzburg–Landau order parameters across the junction is called the Josephson phase:

The Schrödinger equation can therefore be rewritten as:

and its complex conjugate equation is:

Add the two conjugate equations together to eliminate :

Since , we have:

Now, subtract the two conjugate equations to eliminate :

which gives:

Similarly, for superconductor B we can derive that:

Noting that the evolution of Josephson phase is and the time derivative of charge carrier density is proportional to current , when , the above solution yields the Josephson equations: [15]

(1)

(2)

where and are the voltage across and the current through the Josephson junction, and is a parameter of the junction named the critical current. Equation (1) is called the first Josephson relation or weak-link current-phase relation, and equation (2) is called the second Josephson relation or superconducting phase evolution equation. The critical current of the Josephson junction depends on the properties of the superconductors, and can also be affected by environmental factors like temperature and externally applied magnetic field.

The Josephson constant is defined as:

and its inverse is the magnetic flux quantum:

The superconducting phase evolution equation can be reexpressed as:

If we define:

then the voltage across the junction is:

which is very similar to Faraday's law of induction. But note that this voltage does not come from magnetic energy, since there is no magnetic field in the superconductors; Instead, this voltage comes from the kinetic energy of the carriers (i.e. the Cooper pairs). This phenomenon is also known as kinetic inductance.

Three main effects

Typical I-V characteristic of a superconducting tunnel junction, a common kind of Josephson junction. The scale of the vertical axis is 50 mA and that of the horizontal one is 1 mV. The bar at
V
=
0
{\displaystyle V=0}
represents the DC Josephson effect, while the current at large values of
|
V
|
{\displaystyle \left|V\right|}
is due to the finite value of the superconductor bandgap and not reproduced by the above equations. I-V characteristics of Josephson Junction.JPG
Typical I-V characteristic of a superconducting tunnel junction, a common kind of Josephson junction. The scale of the vertical axis is 50 μA and that of the horizontal one is 1 mV. The bar at represents the DC Josephson effect, while the current at large values of is due to the finite value of the superconductor bandgap and not reproduced by the above equations.

There are three main effects predicted by Josephson that follow directly from the Josephson equations:

The DC Josephson effect

The DC Josephson effect is a direct current crossing the insulator in the absence of any external electromagnetic field, owing to tunneling. This DC Josephson current is proportional to the sine of the Josephson phase (phase difference across the insulator, which stays constant over time), and may take values between and .

The AC Josephson effect

With a fixed voltage across the junction, the phase will vary linearly with time and the current will be a sinusoidal AC (alternating current) with amplitude and frequency . This means a Josephson junction can act as a perfect voltage-to-frequency converter.

The inverse AC Josephson effect

Microwave radiation of a single (angular) frequency can induce quantized DC voltages [16] across the Josephson junction, in which case the Josephson phase takes the form , and the voltage and current across the junction will be:

The DC components are:

This means a Josephson junction can act like a perfect frequency-to-voltage converter, [17] which is the theoretical basis for the Josephson voltage standard.

Josephson inductance

When the current and Josephson phase varies over time, the voltage drop across the junction will also vary accordingly; As shown in derivation below, the Josephson relations determine that this behavior can be modeled by a kinetic inductance named Josephson Inductance. [18]

Rewrite the Josephson relations as:

Now, apply the chain rule to calculate the time derivative of the current:

Rearrange the above result in the form of the current–voltage characteristic of an inductor:

This gives the expression for the kinetic inductance as a function of the Josephson Phase:

Here, is a characteristic parameter of the Josephson junction, named the Josephson Inductance.

Note that although the kinetic behavior of the Josephson junction is similar to that of an inductor, there is no associated magnetic field. This behaviour is derived from the kinetic energy of the charge carriers, instead of the energy in a magnetic field.

Josephson energy

Based on the similarity of the Josephson junction to a non-linear inductor, the energy stored in a Josephson junction when a supercurrent flows through it can be calculated. [19]

The supercurrent flowing through the junction is related to the Josephson phase by the current-phase relation (CPR):

The superconducting phase evolution equation is analogous to Faraday's law:

Assume that at time , the Josephson phase is ; At a later time , the Josephson phase evolved to . The energy increase in the junction is equal to the work done on the junction:

This shows that the change of energy in the Josephson junction depends only on the initial and final state of the junction and not the path. Therefore, the energy stored in a Josephson junction is a state function, which can be defined as:

Here is a characteristic parameter of the Josephson junction, named the Josephson Energy. It is related to the Josephson Inductance by . An alternative but equivalent definition is also often used.

Again, note that a non-linear magnetic coil inductor accumulates potential energy in its magnetic field when a current passes through it; However, in the case of Josephson junction, no magnetic field is created by a supercurrent — the stored energy comes from the kinetic energy of the charge carriers instead.

The RCSJ model

The Resistively Capacitance Shunted Junction (RCSJ) model, [20] [21] or simply shunted junction model, includes the effect of AC impedance of an actual Josephson junction on top of the two basic Josephson relations stated above.

As per Thévenin's theorem, [22] the AC impedance of the junction can be represented by a capacitor and a shunt resistor, both parallel [23] to the ideal Josephson Junction. The complete expression for the current drive becomes:

where the first term is displacement current with – effective capacitance, and the third is normal current with – effective resistance of the junction.

Josephson penetration depth

The Josephson penetration depth characterizes the typical length on which an externally applied magnetic field penetrates into the long Josephson junction. It is usually denoted as and is given by the following expression (in SI):

where is the magnetic flux quantum, is the critical supercurrent density (A/m2), and characterizes the inductance of the superconducting electrodes [24]

where is the thickness of the Josephson barrier (usually insulator), and are the thicknesses of superconducting electrodes, and and are their London penetration depths. The Josephson penetration depth usually ranges from a few μm to several mm if the critical current density is very low. [25]

See also

Related Research Articles

<span class="mw-page-title-main">Polar coordinate system</span> Coordinates comprising a distance and an angle

In mathematics, the polar coordinate system is a two-dimensional coordinate system in which each point on a plane is determined by a distance from a reference point and an angle from a reference direction. The reference point is called the pole, and the ray from the pole in the reference direction is the polar axis. The distance from the pole is called the radial coordinate, radial distance or simply radius, and the angle is called the angular coordinate, polar angle, or azimuth. Angles in polar notation are generally expressed in either degrees or radians.

<span class="mw-page-title-main">Spherical coordinate system</span> 3-dimensional coordinate system

In mathematics, a spherical coordinate system is a coordinate system for three-dimensional space where the position of a given point in space is specified by three numbers, : the radial distance of the radial liner connecting the point to the fixed point of origin ; the polar angle θ of the radial line r; and the azimuthal angle φ of the radial line r.

<span class="mw-page-title-main">SQUID</span> Type of magnetometer

A SQUID is a very sensitive magnetometer used to measure extremely weak magnetic fields, based on superconducting loops containing Josephson junctions.

<span class="mw-page-title-main">Spherical harmonics</span> Special mathematical functions defined on the surface of a sphere

In mathematics and physical science, spherical harmonics are special functions defined on the surface of a sphere. They are often employed in solving partial differential equations in many scientific fields. A list of the spherical harmonics is available in Table of spherical harmonics.

The magnetic flux, represented by the symbol Φ, threading some contour or loop is defined as the magnetic field B multiplied by the loop area S, i.e. Φ = BS. Both B and S can be arbitrary, meaning Φ can be as well. However, if one deals with the superconducting loop or a hole in a bulk superconductor, the magnetic flux threading such a hole/loop is quantized. The (superconducting) magnetic flux quantumΦ0 = h/(2e)2.067833848...×10−15 Wb is a combination of fundamental physical constants: the Planck constant h and the electron charge e. Its value is, therefore, the same for any superconductor. The phenomenon of flux quantization was discovered experimentally by B. S. Deaver and W. M. Fairbank and, independently, by R. Doll and M. Näbauer, in 1961. The quantization of magnetic flux is closely related to the Little–Parks effect, but was predicted earlier by Fritz London in 1948 using a phenomenological model.

The sine-Gordon equation is a nonlinear hyperbolic partial differential equation for a function dependent on two variables typically denoted and , involving the wave operator and the sine of .

<span class="mw-page-title-main">Path integral formulation</span> Formulation of quantum mechanics

The path integral formulation is a description in quantum mechanics that generalizes the stationary action principle of classical mechanics. It replaces the classical notion of a single, unique classical trajectory for a system with a sum, or functional integral, over an infinity of quantum-mechanically possible trajectories to compute a quantum amplitude.

In physics, quantum tunnelling, barrier penetration, or simply tunnelling is a quantum mechanical phenomenon in which an object such as an electron or atom passes through a potential energy barrier that, according to classical mechanics, should not be passable due to the object not having sufficient energy to pass or surmount the barrier.

In physics and astronomy, the Reissner–Nordström metric is a static solution to the Einstein–Maxwell field equations, which corresponds to the gravitational field of a charged, non-rotating, spherically symmetric body of mass M. The analogous solution for a charged, rotating body is given by the Kerr–Newman metric.

In rotordynamics, the rigid rotor is a mechanical model of rotating systems. An arbitrary rigid rotor is a 3-dimensional rigid object, such as a top. To orient such an object in space requires three angles, known as Euler angles. A special rigid rotor is the linear rotor requiring only two angles to describe, for example of a diatomic molecule. More general molecules are 3-dimensional, such as water, ammonia, or methane.

<span class="mw-page-title-main">Tissot's indicatrix</span> Characterization of distortion in map protections

In cartography, a Tissot's indicatrix is a mathematical contrivance presented by French mathematician Nicolas Auguste Tissot in 1859 and 1871 in order to characterize local distortions due to map projection. It is the geometry that results from projecting a circle of infinitesimal radius from a curved geometric model, such as a globe, onto a map. Tissot proved that the resulting diagram is an ellipse whose axes indicate the two principal directions along which scale is maximal and minimal at that point on the map.

<span class="mw-page-title-main">Jaynes–Cummings model</span> Model in quantum optics

The Jaynes–Cummings model is a theoretical model in quantum optics. It describes the system of a two-level atom interacting with a quantized mode of an optical cavity, with or without the presence of light. It was originally developed to study the interaction of atoms with the quantized electromagnetic field in order to investigate the phenomena of spontaneous emission and absorption of photons in a cavity.

The theoretical and experimental justification for the Schrödinger equation motivates the discovery of the Schrödinger equation, the equation that describes the dynamics of nonrelativistic particles. The motivation uses photons, which are relativistic particles with dynamics described by Maxwell's equations, as an analogue for all types of particles.

In mathematics, vector spherical harmonics (VSH) are an extension of the scalar spherical harmonics for use with vector fields. The components of the VSH are complex-valued functions expressed in the spherical coordinate basis vectors.

Common integrals in quantum field theory are all variations and generalizations of Gaussian integrals to the complex plane and to multiple dimensions. Other integrals can be approximated by versions of the Gaussian integral. Fourier integrals are also considered.

In quantum computing, and more specifically in superconducting quantum computing, the phase qubit is a superconducting device based on the superconductor–insulator–superconductor (SIS) Josephson junction, designed to operate as a quantum bit, or qubit.

An LC circuit can be quantized using the same methods as for the quantum harmonic oscillator. An LC circuit is a variety of resonant circuit, and consists of an inductor, represented by the letter L, and a capacitor, represented by the letter C. When connected together, an electric current can alternate between them at the circuit's resonant frequency:

Static force fields are fields, such as a simple electric, magnetic or gravitational fields, that exist without excitations. The most common approximation method that physicists use for scattering calculations can be interpreted as static forces arising from the interactions between two bodies mediated by virtual particles, particles that exist for only a short time determined by the uncertainty principle. The virtual particles, also known as force carriers, are bosons, with different bosons associated with each force.

Lagrangian field theory is a formalism in classical field theory. It is the field-theoretic analogue of Lagrangian mechanics. Lagrangian mechanics is used to analyze the motion of a system of discrete particles each with a finite number of degrees of freedom. Lagrangian field theory applies to continua and fields, which have an infinite number of degrees of freedom.

A φ Josephson junction is a particular type of the Josephson junction, which has a non-zero Josephson phase φ across it in the ground state. A π Josephson junction, which has the minimum energy corresponding to the phase of π, is a specific example of it.

References

  1. 1 2 Josephson, B. D. (1962). "Possible new effects in superconductive tunnelling". Physical Letters. 1 (7): 251–253. Bibcode:1962PhL.....1..251J. doi:10.1016/0031-9163(62)91369-0.
  2. Josephson, B. D. (1974). "The discovery of tunnelling supercurrents". Reviews of Modern Physics. 46 (2): 251–254. Bibcode:1974RvMP...46..251J. doi:10.1103/RevModPhys.46.251. S2CID   54748764.
    Also in Josephson, B. D. (1974). "The Discovery of Tunnelling Supercurrents". Europhysics News. 5 (3): 1–5. Bibcode:1974ENews...5c...1J. doi:10.1051/epn/19740503001.
  3. Steven Strogatz, Sync: The Emerging Science of Spontaneous Order, Hyperion, 2003.
  4. Josephson, Brian D. (December 12, 1973). "The Discovery of Tunneling Supercurrents (Nobel Lecture)".
  5. Cohen, M. H.; Falicov, L. M.; Phillips, J. C. (15 April 1962). "Superconductive Tunneling". Physical Review Letters. 8 (8): 316–318. Bibcode:1962PhRvL...8..316C. doi:10.1103/PhysRevLett.8.316.
  6. 1 2 3 Daitch, Vicki; Hoddeson, Lillian (2002). True Genius: The Life and Science of John Bardeen . Joseph Henry Press. p.  117. ISBN   9780309084086.
  7. Anderson, P. W.; Rowell, J. M. (15 March 1963). "Probable Observation of the Josephson Tunnel Effect". Physical Review Letters. 10 (6): 230. Bibcode:1963PhRvL..10..230A. doi:10.1103/PhysRevLett.10.230.
  8. "The Nobel Prize in Physics 1973". The Nobel Prize. Retrieved 2023-03-01.
  9. Anderson, P. W.; Dayem, A. H. (1964). "Radio-frequency effects in superconducting thin film bridges". Physical Review Letters. 13 (6): 195. Bibcode:1964PhRvL..13..195A. doi:10.1103/PhysRevLett.13.195.
  10. Dawe, Richard (28 October 1998). "SQUIDs: A Technical Report – Part 3: SQUIDs". rich.phekda.org. Archived from the original (website) on 27 July 2011. Retrieved 2011-04-21.
  11. Fulton, T. A.; Gammel, P. L.; Bishop, D. J.; Dunkleberger, L. N.; Dolan, G. J. (1989). "Observation of Combined Josephson and Charging Effects in Small Tunnel Junction Circuits". Physical Review Letters. 63 (12): 1307–1310. Bibcode:1989PhRvL..63.1307F. doi:10.1103/PhysRevLett.63.1307. PMID   10040529.
  12. Bouchiat, V.; Vion, D.; Joyez, P.; Esteve, D.; Devoret, M. H. (1998). "Quantum coherence with a single Cooper pair". Physica Scripta. T76: 165. Bibcode:1998PhST...76..165B. doi:10.1238/Physica.Topical.076a00165. S2CID   250887469.
  13. Sato, Y.; Packard, R. (October 2012), Superfluid helium interferometers, Physics Today, p. 31.
  14. "The Feynman Lectures on Physics Vol. III Ch. 21: The Schrödinger Equation in a Classical Context: A Seminar on Superconductivity, Section 21-9: The Josephson junction". feynmanlectures.caltech.edu. Retrieved 2020-01-03.
  15. Barone, A.; Paterno, G. (1982). Physics and Applications of the Josephson Effect. New York: John Wiley & Sons. ISBN   978-0-471-01469-0.
  16. Langenberg, D. N.; Scalapino, D. J.; Taylor, B. N.; Eck, R. E. (1966-04-01). "Microwave-induced D.C. voltages across Josephson junctions". Physics Letters. 20 (6): 563–565. Bibcode:1966PhL....20..563L. doi:10.1016/0031-9163(66)91114-0. ISSN   0031-9163.
  17. Levinsen, M. T.; Chiao, R. Y.; Feldman, M. J.; Tucker, B. A. (1977-12-01). "An inverse ac Josephson effect voltage standard". Applied Physics Letters. 31 (11): 776–778. Bibcode:1977ApPhL..31..776L. doi:10.1063/1.89520. ISSN   0003-6951.
  18. Devoret, M.; Wallraff, A.; Martinis, J. (2004). "Superconducting Qubits: A Short Review". arXiv: cond-mat/0411174 .
  19. Michael Tinkham, Introduction to superconductivity, Courier Corporation, 1986.
  20. McCumber, D. E. (1968-06-01). "Effect of ac Impedance on dc Voltage-Current Characteristics of Superconductor Weak-Link Junctions". Journal of Applied Physics. 39 (7): 3113–3118. Bibcode:1968JAP....39.3113M. doi:10.1063/1.1656743. ISSN   0021-8979.
  21. Chakravarty, Sudip; Ingold, Gert-Ludwig; Kivelson, Steven; Zimanyi, Gergely (1988-03-01). "Quantum statistical mechanics of an array of resistively shunted Josephson junctions". Physical Review B. 37 (7): 3283–3294. Bibcode:1988PhRvB..37.3283C. doi:10.1103/PhysRevB.37.3283. PMID   9944915.
  22. "AC Thevenin's Theorem". hyperphysics.phy-astr.gsu.edu. Retrieved 2020-01-03.
  23. "Dynamics of RF SQUID". phelafel.technion.ac.il. Archived from the original on 2021-06-13. Retrieved 2020-01-11.
  24. Weihnacht, M. (1969). "Influence of Film Thickness on D. C. Josephson Current". Physica Status Solidi B. 32 (2): 169. Bibcode:1969PSSBR..32..169W. doi:10.1002/pssb.19690320259.
  25. Buckel, Werner; Kleiner, Reinhold (2004). Supraleitung (6. ed.). Tübingen: Wiley-VCH Verlag GmbH&Co.KGaA. p. 67. ISBN   3527403485.