Intercept theorem

Last updated

The intercept theorem, also known as Thales's theorem, basic proportionality theorem or side splitter theorem, is an important theorem in elementary geometry about the ratios of various line segments that are created if two rays with a common starting point are intercepted by a pair of parallels. It is equivalent to the theorem about ratios in similar triangles. It is traditionally attributed to Greek mathematician Thales. It was known to the ancient Babylonians and Egyptians, although its first known proof appears in Euclid's Elements .

Contents

Formulation of the theorem

intercept theorem with rays Intercept theorem a.svg
intercept theorem with rays
|SA| / |SB| = |AC| / |BD| does not necessarily imply AC is parallel to BD. Strahlensatz gegenbeispiel umkehrung 2ter satz.svg
|SA|/|SB| = |AC|/|BD| does not necessarily imply AC is parallel to BD.

Suppose S is the common starting point of two rays, and two parallel lines are intersecting those two rays (see figure). Let A, B be the intersections of the first ray with the two parallels, such that B is further away from S than A, and similarly C, D are the intersections of the second ray with the two parallels such that D is further away from S than C. In this configuration the following statements hold: [1] [2]

  1. The ratio of any two segments on the first ray equals the ratio of the according segments on the second ray:
    , ,
  2. The ratio of the two segments on the same ray starting at S equals the ratio of the segments on the parallels:
  3. The converse of the first statement is true as well, i.e. if the two rays are intercepted by two arbitrary lines and holds then the two intercepting lines are parallel. However, the converse of the second statement is not true (see graphic for a counterexample).

Extensions and conclusions

intercept theorem with a pair of intersecting lines Intercept theorem4.svg
intercept theorem with a pair of intersecting lines
intercept theorem with more than two lines Intercept theorem3.svg
intercept theorem with more than two lines

The first two statements remain true if the two rays get replaced by two lines intersecting in . In this case there are two scenarios with regard to , either it lies between the 2 parallels (X figure) or it does not (V figure). If is not located between the two parallels, the original theorem applies directly. If lies between the two parallels, then a reflection of and at yields V figure with identical measures for which the original theorem now applies. [2] The third statement (converse) however does not remain true for lines. [3] [4] [5]

If there are more than two rays starting at or more than two lines intersecting at , then each parallel contains more than one line segment and the ratio of two line segments on one parallel equals the ratio of the according line segments on the other parallel. For instance if there's a third ray starting at and intersecting the parallels in and , such that is further away from than , then the following equalities holds: [4]

,

For the second equation the converse is true as well, that is if the 3 rays are intercepted by two lines and the ratios of the according line segments on each line are equal, then those 2 lines must be parallel. [4]

Similarity and similar triangles

Arranging two similar triangles, so that the intercept theorem can be applied Intercept theorem- Triangles.svg
Arranging two similar triangles, so that the intercept theorem can be applied

The intercept theorem is closely related to similarity. It is equivalent to the concept of similar triangles, i.e. it can be used to prove the properties of similar triangles and similar triangles can be used to prove the intercept theorem. By matching identical angles you can always place two similar triangles in one another so that you get the configuration in which the intercept theorem applies; and conversely the intercept theorem configuration always contains two similar triangles.

Scalar multiplication in vector spaces

In a normed vector space, the axioms concerning the scalar multiplication (in particular and ) ensure that the intercept theorem holds. One has

Intercept theorem vectors 2.svg

Applications

Algebraic formulation of compass and ruler constructions

There are three famous problems in elementary geometry which were posed by the Greeks in terms of compass and straightedge constructions: [6] [7]

  1. Trisecting the angle
  2. Doubling the cube
  3. Squaring the circle

It took more than 2000 years until all three of them were finally shown to be impossible. This was achieved in the 19th century with the help of algebraic methods, that had become available by then. In order to reformulate the three problems in algebraic terms using field extensions, one needs to match field operations with compass and straightedge constructions (see constructible number). In particular it is important to assure that for two given line segments, a new line segment can be constructed, such that its length equals the product of lengths of the other two. Similarly one needs to be able to construct, for a line segment of length , a new line segment of length . The intercept theorem can be used to show that for both cases, that such a construction is possible.

Construction of a product Number construction multiplication.svg

Construction of an inverse Number construction inverse.svg

Dividing a line segment in a given ratio

To divide an arbitrary line segment in a ratio, draw an arbitrary angle in A with as one leg. On the other leg construct equidistant points, then draw the line through the last point and B and parallel line through the mth point. This parallel line divides in the desired ratio. The graphic to the right shows the partition of a line segment in a ratio. [8]

Dividing segment.svg

Measuring and survey

Height of the Cheops pyramid

measuring pieces Thales Theorem 6.svg
measuring pieces
computing C and D Thales Theorem 7.svg
computing C and D

According to some historical sources the Greek mathematician Thales applied the intercept theorem to determine the height of the Cheops' pyramid. The following description illustrates the use of the intercept theorem to compute the height of the pyramid. It does not, however, recount Thales' original work, which was lost. [9] [10]

Thales measured the length of the pyramid's base and the height of his pole. Then at the same time of the day he measured the length of the pyramid's shadow and the length of the pole's shadow. This yielded the following data:

  • height of the pole (A): 1.63 m
  • shadow of the pole (B): 2 m
  • length of the pyramid base: 230 m
  • shadow of the pyramid: 65 m

From this he computed

Knowing A, B and C he was now able to apply the intercept theorem to compute

Measuring the width of a river

The intercept theorem can be used to determine a distance that cannot be measured directly, such as the width of a river or a lake, the height of tall buildings or similar. The graphic to the right illustrates measuring the width of a river. The segments ,, are measured and used to compute the wanted distance .

River Chart.svg

Parallel lines in triangles and trapezoids

The intercept theorem can be used to prove that a certain construction yields parallel line (segment)s.

If the midpoints of two triangle sides are connected then the resulting line segment is parallel to the third triangle side (Midpoint theorem of triangles).

Triangle midpoints.svg

If the midpoints of the two non-parallel sides of a trapezoid are connected, then the resulting line segment is parallel to the other two sides of the trapezoid.

Trapezoid midpoint.svg

Historical aspects

The theorem is traditionally attributed to the Greek mathematician Thales of Miletus, who may have used some form of the theorem to determine heights of pyramids in Egypt and to compute the distance of ship from the shore. [11] [12] [13] [14]

Proof

An elementary proof of the theorem uses triangles of equal area to derive the basic statements about the ratios (claim 1). The other claims then follow by applying the first claim and contradiction. [1]

Claim 1

Intercept theorem proof 2.svg

Notation: For a triangle the vertical bars () denote its area and for a line segment its length.

Proof: Since , the altitudes of and are of equal length. As those triangles share the same baseline, their areas are identical. So we have and therefore as well. This yields

and

Plugging in the formula for triangle areas () transforms that into

and

Canceling the common factors results in:

(a) and (b)

Now use (b) to replace and in (a):

Using (b) again this simplifies to: (c)

Claim 2

Intercept theorem proof2.svg

Draw an additional parallel to through A. This parallel intersects in G. Then one has and due to claim 1 and therefore

Claim 3

Intercept Theorem - proof 3.svg

Assume and are not parallel. Then the parallel line to through intersects in . Since is true, we have

and on the other hand from claim 1 we have
.
So and are on the same side of and have the same distance to , which means . This is a contradiction, so the assumption could not have been true, which means and are indeed parallel

Notes

  1. 1 2 Schupp, H. (1977). Elementargeometrie (in German). UTB Schöningh. pp. 124–126. ISBN   3-506-99189-2.
  2. 1 2 Strahlensätze. In: Schülerduden: Mathematik I. Dudenverlag, 8. edition, Mannheim 2008, pp. 431–433 (German)
  3. Agricola, Ilka; Friedrich, Thomas (2008). Elementary Geometry. AMS. pp. 10–13, 16–18. ISBN   0-8218-4347-8. ( online copy , p. 10, at Google Books)
  4. 1 2 3 Lorenz Halbeisen, Norbert Hungerbühler, Juan Läuchli: Mit harmonischen Verhältnissen zu Kegelschnitten: Perlen der klassischen Geometrie. Springer 2016, ISBN   9783662530344, pp. 191–208 (German)
  5. See Agricola/Thomas or the following figure:
    |SA| / |SB| = |SC| / |SD| does not necessarily imply AC is parallel to BD. Strahlensatz gegenbeispiel umkehrung geraden 1ter satz.svg
    |SA|/|SB| = |SC|/|SD| does not necessarily imply AC is parallel to BD.
  6. Kazarinoff, Nicholas D. (2003) [1970], Ruler and the Round, Dover, p. 3, ISBN   0-486-42515-0
  7. Kunz, Ernst (1991). Algebra (in German). Vieweg. pp. 5–7. ISBN   3-528-07243-1.
  8. Ostermann, Alexander; Wanner, Gerhard (2012). Geometry by Its History . Springer. pp.  7. ISBN   978-3-642-29163-0. ( online copy , p. 7, at Google Books)
  9. No original work of Thales has survived. All historical sources that attribute the intercept theorem or related knowledge to him were written centuries after his death. Diogenes Laertius and Pliny give a description that strictly speaking does not require the intercept theorem, but can rely on a simple observation only, namely that at a certain point of the day the length of an object's shadow will match its height. Laertius quotes a statement of the philosopher Hieronymus (3rd century BC) about Thales: "Hieronymus says that [Thales] measured the height of the pyramids by the shadow they cast, taking the observation at the hour when our shadow is of the same length as ourselves (i.e. as our own height).". Pliny writes: "Thales discovered how to obtain the height of pyramids and all other similar objects, namely, by measuring the shadow of the object at the time when a body and its shadow are equal in length.". However, Plutarch gives an account that may suggest Thales knowing the intercept theorem or at least a special case of it:".. without trouble or the assistance of any instrument [he] merely set up a stick at the extremity of the shadow cast by the pyramid and, having thus made two triangles by the intercept of the sun's rays, ... showed that the pyramid has to the stick the same ratio which the shadow [of the pyramid] has to the shadow [of the stick]". (Source: Thales biography of the MacTutor, the (translated) original works of Plutarch and Laertius are: Moralia, The Dinner of the Seven Wise Men, 147A and Lives of Eminent Philosophers, Chapter 1. Thales, para.27)
  10. Herbert Bruderer: Milestones in Analog and Digital Computing. Springer, 2021, ISBN   9783030409746, pp. 214–217
  11. Dietmar Herrmann: Ancient Mathematics. History of Mathematics in Ancient Greece and Hellenism, Springer 2022, ISBN   978-3-662-66493-3, pp. 27-36
  12. Francis Borceux: An Axiomatic Approach to Geometry. Springer, 2013, pp. 10–13
  13. Gilles Dowek: Computation, Proof, Machine. Cambridge University Press, 2015, ISBN   9780521118019, pp. 17-18
  14. Lothar Redlin, Ngo Viet, Saleem Watson: "Thales' Shadow", Mathematics Magazine, Vol. 73, No. 5 (Dec., 2000), pp. 347-353 (JSTOR

Related Research Articles

<span class="mw-page-title-main">Euclidean space</span> Fundamental space of geometry

Euclidean space is the fundamental space of geometry, intended to represent physical space. Originally, in Euclid's Elements, it was the three-dimensional space of Euclidean geometry, but in modern mathematics there are Euclidean spaces of any positive integer dimension n, which are called Euclidean n-spaces when one wants to specify their dimension. For n equal to one or two, they are commonly called respectively Euclidean lines and Euclidean planes. The qualifier "Euclidean" is used to distinguish Euclidean spaces from other spaces that were later considered in physics and modern mathematics.

<span class="mw-page-title-main">Hyperbola</span> Plane curve: conic section

In mathematics, a hyperbola is a type of smooth curve lying in a plane, defined by its geometric properties or by equations for which it is the solution set. A hyperbola has two pieces, called connected components or branches, that are mirror images of each other and resemble two infinite bows. The hyperbola is one of the three kinds of conic section, formed by the intersection of a plane and a double cone. If the plane intersects both halves of the double cone but does not pass through the apex of the cones, then the conic is a hyperbola.

<span class="mw-page-title-main">Parabola</span> Plane curve: conic section

In mathematics, a parabola is a plane curve which is mirror-symmetrical and is approximately U-shaped. It fits several superficially different mathematical descriptions, which can all be proved to define exactly the same curves.

<span class="mw-page-title-main">Triangle</span> Shape with three sides

A triangle is a polygon with three corners and three sides, one of the basic shapes in geometry. The corners, also called vertices, are zero-dimensional points while the sides connecting them, also called edges, are one-dimensional line segments. The triangle's interior is a two-dimensional region. Sometimes an arbitrary edge is chosen to be the base, in which case the opposite vertex is called the apex.

<span class="mw-page-title-main">Affine transformation</span> Geometric transformation that preserves lines but not angles nor the origin

In Euclidean geometry, an affine transformation or affinity is a geometric transformation that preserves lines and parallelism, but not necessarily Euclidean distances and angles.

<span class="mw-page-title-main">Similarity (geometry)</span> Property of objects which are scaled or mirrored versions of each other

In Euclidean geometry, two objects are similar if they have the same shape, or if one has the same shape as the mirror image of the other. More precisely, one can be obtained from the other by uniformly scaling, possibly with additional translation, rotation and reflection. This means that either object can be rescaled, repositioned, and reflected, so as to coincide precisely with the other object. If two objects are similar, each is congruent to the result of a particular uniform scaling of the other.

<span class="mw-page-title-main">Right triangle</span> Triangle containing a 90-degree angle

A right triangle or right-angled triangle, sometimes called an orthogonal triangle or rectangular triangle, is a triangle in which two sides are perpendicular, forming a right angle.

<span class="mw-page-title-main">Perpendicular</span> Relationship between two lines that meet at a right angle (90 degrees)

In geometry, two geometric objects are perpendicular if their intersection forms right angles at the point of intersection called a foot. The condition of perpendicularity may be represented graphically using the perpendicular symbol, ⟂. Perpendicular intersections can happen between two lines, between a line and a plane, and between two planes.

<span class="mw-page-title-main">Solid angle</span> Measure of how large an object appears to an observer at a given point in three-dimensional space

In geometry, a solid angle is a measure of the amount of the field of view from some particular point that a given object covers. That is, it is a measure of how large the object appears to an observer looking from that point. The point from which the object is viewed is called the apex of the solid angle, and the object is said to subtend its solid angle at that point.

<span class="mw-page-title-main">Ceva's theorem</span> Geometric relation between line segments from a triangles vertices and their intersection

In Euclidean geometry, Ceva's theorem is a theorem about triangles. Given a triangle ABC, let the lines AO, BO, CO be drawn from the vertices to a common point O, to meet opposite sides at D, E, F respectively. Then, using signed lengths of segments,

<span class="mw-page-title-main">Bisection</span> Division of something into two equal or congruent parts

In geometry, bisection is the division of something into two equal or congruent parts. Usually it involves a bisecting line, also called a bisector. The most often considered types of bisectors are the segment bisector, a line that passes through the midpoint of a given segment, and the angle bisector, a line that passes through the apex of an angle . In three-dimensional space, bisection is usually done by a bisecting plane, also called the bisector.

<span class="mw-page-title-main">Altitude (triangle)</span> Perpendicular line segment from a triangles side to opposite vertex

In geometry, an altitude of a triangle is a line segment through a vertex and perpendicular to a line containing the side opposite the vertex. This line containing the opposite side is called the extended base of the altitude. The intersection of the extended base and the altitude is called the foot of the altitude. The length of the altitude, often simply called "the altitude", is the distance between the extended base and the vertex. The process of drawing the altitude from the vertex to the foot is known as dropping the altitude at that vertex. It is a special case of orthogonal projection.

<span class="mw-page-title-main">Thales's theorem</span> Angle formed by a point on a circle and the 2 ends of a diameter is a right angle

In geometry, Thales's theorem states that if A, B, and C are distinct points on a circle where the line AC is a diameter, the angle ABC is a right angle. Thales's theorem is a special case of the inscribed angle theorem and is mentioned and proved as part of the 31st proposition in the third book of Euclid's Elements. It is generally attributed to Thales of Miletus, but it is sometimes attributed to Pythagoras.

In mathematics, the covariant derivative is a way of specifying a derivative along tangent vectors of a manifold. Alternatively, the covariant derivative is a way of introducing and working with a connection on a manifold by means of a differential operator, to be contrasted with the approach given by a principal connection on the frame bundle – see affine connection. In the special case of a manifold isometrically embedded into a higher-dimensional Euclidean space, the covariant derivative can be viewed as the orthogonal projection of the Euclidean directional derivative onto the manifold's tangent space. In this case the Euclidean derivative is broken into two parts, the extrinsic normal component and the intrinsic covariant derivative component.

<span class="mw-page-title-main">Barycentric coordinate system</span> Coordinate system that is defined by points instead of vectors

In geometry, a barycentric coordinate system is a coordinate system in which the location of a point is specified by reference to a simplex. The barycentric coordinates of a point can be interpreted as masses placed at the vertices of the simplex, such that the point is the center of mass of these masses. These masses can be zero or negative; they are all positive if and only if the point is inside the simplex.

<span class="mw-page-title-main">Line (geometry)</span> Straight figure with zero width and depth

In geometry, a straight line, usually abbreviated line, is an infinitely long object with no width, depth, or curvature, an idealization of such physical objects as a straightedge, a taut string, or a ray of light. Lines are spaces of dimension one, which may be embedded in spaces of dimension two, three, or higher. The word line may also refer, in everyday life, to a line segment, which is a part of a line delimited by two points.

In geometry, collinearity of a set of points is the property of their lying on a single line. A set of points with this property is said to be collinear. In greater generality, the term has been used for aligned objects, that is, things being "in a line" or "in a row".

In geometry, a cevian is a line segment which joins a vertex of a triangle to a point on the opposite side of the triangle. Medians and angle bisectors are special cases of cevians. The name "cevian" comes from the Italian mathematician Giovanni Ceva, who proved a well-known theorem about cevians which also bears his name.

<span class="mw-page-title-main">Projective harmonic conjugate</span> Point found separated from another, given a point pair

In projective geometry, the harmonic conjugate point of a point on the real projective line with respect to two other points is defined by the following construction:

<span class="mw-page-title-main">Steiner inellipse</span> Unique ellipse tangent to all 3 midpoints of a given triangles sides

In geometry, the Steiner inellipse, midpoint inellipse, or midpoint ellipse of a triangle is the unique ellipse inscribed in the triangle and tangent to the sides at their midpoints. It is an example of an inellipse. By comparison the inscribed circle and Mandart inellipse of a triangle are other inconics that are tangent to the sides, but not at the midpoints unless the triangle is equilateral. The Steiner inellipse is attributed by Dörrie to Jakob Steiner, and a proof of its uniqueness is given by Dan Kalman.

References