The International Code of Signals (INTERCO) is an international system of signals and codes for use by vessels to communicate important messages regarding safety of navigation and related matters. Signals can be sent by flaghoist, signal lamp ("blinker"), flag semaphore, radiotelegraphy, and radiotelephony. The International Code is the most recent evolution of a wide variety of maritime flag signalling systems.
The International Code of Signals was preceded by a variety of naval signals and private signals, most notably Marryat's Code, the most widely used code flags prior to 1857. What is now the International Code of Signals was drafted in 1855 by the British Board of Trade and published in 1857 as the Commercial Code. It came in two parts: the first containing universal and international signals, and the second British signals only. Eighteen separate signal flags (see chart) were used to make over 70,000 possible messages. Vowels were omitted from the set to avoid spelling out any word that might be objectionable in any language, and some little-used letters were also omitted. It was revised by the Board of Trade in 1887, and was modified at the International Conference of 1889 in Washington, D.C. [1] The new international code of signals officially came into worldwide operation on 1 January 1901. At first it was used concurrently with the old system until 1 January 1902, and then used exclusively after 1 January 1903. In this new edition, the number of flags was increased from 18 flags plus a code pennant to 26 flags and a code pennant. The eight new flags represented the vowels A E I O U and the letters X Y Z. [2]
A slightly different version was published in Brown's Signalling, 18th Edition, February, 1916, pages 9-28. Charlie, Delta, Echo, Foxtrot and Golf were pennants corresponding to more modern numeral pennants 1, 2, 3, 4 and 5. Otherwise the letters appear to correspond to the more modern formats. [3]
The code was severely tested during World War I, and it was found that, "when coding signals, word by word, the occasions upon which signaling failed were more numerous than those when the result was successful." [4] A 1920 meeting of the five Principal Allied and Associated Powers met in Paris and proposed forming the Universal Electrical Communications Union on October 8, 1920 in Washington, D.C. [5] The group suggested revisions to the International Code of Signals, and adopted a phonetic spelling alphabet, but the creation of the organization was not agreed upon.
The 1927 International Radiotelegraph Conference in Washington [6] considered proposals for a new revision of the Code, including preparation in seven languages: English, French, Italian, German, Japanese, Spanish, and Norwegian. This new edition was completed in 1930 and was adopted by the International Radiotelegraph Conference held in Madrid in 1932. [7] The Madrid Conference also set up a standing committee for continual revision of the code. The new version introduced vocabulary for aviation and a complete medical section with the assistance and by the advice of the Office International d'Hygiène Publique. A certain number of signals were also inserted for communications between vessels and shipowners, agents, repair yards, and other maritime stakeholders. The new international code of signals was officially brought into force worldwide on 1 January 1934. Thirteen new flags were introduced, whereby the triangular pennants used for letters, C, D, E, F, and G were replaced with new square flags, and became the numerals 1, 2, 3, 4, and 5. The numerals 6, 7, 8, 9, and 0 were introduced by five new flags, and there were three new substitute flags added. [8]
After World War II, the 1947 International Radio Conference of the International Telecommunication Union suggested in that the International Code of Signals should fall within the competence of the Inter-Governmental Maritime Consultative Organization (IMCO), which became the IMO. [9] In January 1959, the First Assembly of IMCO decided that the organization should assume all the functions then being performed by the Standing Committee of the International Code of Signals.
The Second Assembly of IMCO 1961 endorsed plans for a comprehensive review of the International Code of Signals to meet the needs of mariners. The revisions were prepared in the previous seven languages plus Russian and Greek.
The code was revised in 1964 taking into account recommendations from the 1960 Conference on Safety of Life at Sea (SOLAS) and the 1959 Administrative Radio Conference. [10] Changes included a shift in focus from general communications to safety of navigation, abandonment of the "vocabulary" method of spelling out messages word by word, adaptation to all forms of communication, and elimination of the separate radiotelegraph and geographical sections. It was adopted in 1965. The 1969 English-language version of the code (United States edition, revised 2020) is available online through the National Geospatial-Intelligence Agency (NGA, formerly the National Imagery and Mapping Agency) and can be found here.
The International Code of Signals is currently maintained by the International Maritime Organization (IMO), which published an edition in 2005. [11]
"The purpose of the International Code of Signals is to provide ways and means of communication in situations related essentially to safety of navigation and persons, especially when language difficulties arise." [12] It has done this by first establishing a standardized alphabet (the letters A to Z and the ten digits), along with a spoken form of each letter (to avoid confusing similar-sounding letters, such as 'b', 'p', and 'v'), and associating this alphabet with standardized flags. (See chart to the right.)
Combinations of these alphanumeric characters are assigned as codes for various standardized messages. For instance, the master of a ship may wish to communicate with another ship, where their own radio may not be working or the other ship's call sign is not known or the other ship may not be maintaining a radio watch. One simply raises the Kilo flag (see diagram at the top), or sends the Morse Code equivalent (dash-dot-dash) by flashing light; this has the assigned message of "I wish to communicate with you."
One practical application of the ICS is that all of the standardized messages come in nine languages (English, French, Italian, German, Japanese, Spanish, Norwegian, and, since 1969, Russian and Greek). This fact is immaterial if the sender and receiver(s) are using different languages; each language has a book with equivalent messages keyed to the same code. This is also useful in radiotelephony, or even when ships are within hailing distance, if there is no common language: a crew member on a burning ship yells "yuliett alfa vour", and a vessel coming to their aid knows exactly what they need — "material for foam fire extinguishers" (that is, the foaming agent). (See de:Flaggenalphabet for the German version of single-letter signals.)
The code also covers procedural aspects (how to initiate a call, the format of a message, how to format date and time, etc.), how naval ships (which usually use their own codes) indicate that they are using the ICS (by flying the code pennant), use in radiotelephony (use of the spoken word "Interco"), and various other matters (such as how an aircraft directs a vessel to another vessel in distress and how to order unidentified submarines to surface).
Prior to 1969, the code was much more extensive, covering a wider range of messages and including a list of five-letter codes for every prominent maritime location in the world. Since 1969, it has been reduced to focus on navigation and safety, including a medical section. Signals can be sorted into three groups:
In some cases, additional characters are added to indicate quantities, bearing, course, distance, date, time, latitude, or longitude. There is also provision for spelling words and for indicating use of other codes. Several of the most common single-letter signals are shown at the right. Two-letter signals cover a broad gamut of situations.
Repeated characters can be a problem in flaghoist. To avoid having to carry multiple sets of signal flags, the Code uses three "substitute" (or "repeater") flags. These repeat the flag at the indicated position. For instance, to signal MAA ("I request urgent medical advice" the Mike, Alfa, and 2nd substitute flags would be flown, the substitute indicating a repeat of the second character.
Flag hoist | Code | Meaning |
---|---|---|
| MAA | I request urgent medical advice. |
The pennant at the bottom indicates a repeat of the second letter. |
The Medical Signal Code [13] (incorporated in the International Code of Signals since 1930) is a means of providing assistance when medical personnel are not present. Plain language is generally preferred in such cases (presumably via radiotelephone), but the various codes provide a succinct method of communicating to a doctor the nature of the problem where there are language or communication difficulties, and in return the recommended treatment. Even where there are no language problems, the Medical Signal Code is useful in providing a standard method of case description and treatment. There is also a standard list of medicaments (medicines), keyed to a standard ships medicine chest carried by all merchant ships. The Medical signals all begin with the letter "M" (Mike) followed by two more letters, and sometimes with additional numerals or letters.
Letter, spelling word, pronunciation | Flag | Meaning | |
---|---|---|---|
As single flag | With numeric complements | ||
A Alfa [ˈal.fa] | "I have a diver down; keep well clear at slow speed." | Azimuth or bearing | |
B Bravo [ˈbrɑː.voʊ] | "I am taking in or discharging or carrying dangerous goods." (Originally used by the Royal Navy specifically for military explosives.) | ||
C Charlie [ˈtʃɑː.li] | "Affirmative." [lower-alpha 1] [lower-alpha 2] | Course in degrees magnetic (Three digits denote degrees. Utilizes leading zeroes for values below 100.) | |
D Delta [ˈdɛl.tə] | "Keep clear of me; I am maneuvering with difficulty." [lower-alpha 2] | Date (The first 2 digits denote the day; the next 2 digits denote the month; and 2 other digits to denote the last two digits of the year if necessary. Utilizes leading zeroes for single-digit values.) | |
E Echo [ˈɛk.oʊ] | "I am altering my course to starboard." [lower-alpha 2] | ||
F Foxtrot [ˈfɔks.trɔt] | "I am disabled; communicate with me." | ||
G Golf [gɔlf] | "I require a pilot." By fishing vessels near fishing grounds: "I am hauling nets." | Longitude (The first 2 or 3 digits denote degrees; the last 2 denote minutes.) | |
H Hotel [hoʊˈtɛl] | "I have a pilot on board." [lower-alpha 2] | ||
I India [ˈɪn.dɪə] | "I am altering my course to port." [lower-alpha 2] | ||
J Juliet [ˈdʒuː.ljɛt] | "I am on fire and have dangerous cargo on board: keep well clear of me." or "I am leaking dangerous cargo." | ||
K Kilo [ˈki.loʊ] | "I wish to communicate with you." | "I wish to communicate with you by...": 1) Morse signaling by hand-flags or arms; 2) Loud hailer (megaphone); 3) Morse signaling lamp; 4) Sound signals. | |
L Lima [ˈli.mə] | "You should stop your vessel instantly." | Latitude (The first 2 digits denote degrees; the last 2 denote minutes.) | |
M Mike [maɪk] | "My vessel is stopped and making no way through the water." [lower-alpha 2] | ||
N November [noʊˈvɛm.bə] | "Negative." [lower-alpha 1] | ||
O Oscar [ˈɔs.kə] | "Man overboard." [lower-alpha 2] (often attached to the man overboard pole on boats). With a sinister hoist, the semaphore flag. | ||
P Papa [ˈpa.pə] | The Blue Peter. In harbour: All persons should report on board as the vessel is about to proceed to sea. At sea: It may be used by fishing vessels to mean: "My nets have come fast upon an obstruction." | ||
Q Quebec [kəˈbɛk] | "My vessel is 'healthy' and I request free pratique." | ||
R Romeo [ˈroʊ.mjoʊ] | (No ICS meaning as a single flag) | Distance (range) in nautical miles. | |
S Sierra [siˈɛrə] | "I am operating astern propulsion." [lower-alpha 2] | Speed (velocity) in knots | |
T Tango [ˈtaŋ.goʊ] | "Keep clear of me [lower-alpha 2] ; I am engaged in pair trawling." | Local time. (The first 2 digits denote hours; the last 2 denote minutes.) | |
U Uniform [ˈjuː.nɪ.fɔːm] | "You are running into danger." | ||
V Victor [ˈvɪk.tə] | "I require assistance." | Speed in kilometres per hour. | |
W Whiskey [ˈwɪs.ki] | "I require medical assistance." | ||
X Xray [ˈɛks.reɪ] | "Stop carrying out your intentions and watch for my signals." | ||
Y Yankee [ˈjaŋ.ki] | "I am dragging my anchor." | ||
Z Zulu [ˈzuː.luː] | "I require a tug." By fishing vessels near fishing grounds: "I am shooting nets." [lower-alpha 3] | (UTC). The first 2 digits denote hours; the last 2 denote minutes. | |
Numerals | |||
0 Nadazero [ˌna.daˈzɪə.roʊ] | This and following used as numbers to complement other signals. | ||
1 Unaone [ˌuː.nəˈwʌn] | |||
2 Bissotwo [ˌbɪs.oʊˈtuː] | |||
3 [lower-alpha 4] Terrathree [ˌtɛr.əˈtri] | |||
4 Kartefour [ˌkɑː.təˈfɔː.wə] | |||
5 [lower-alpha 5] Pantafive [ˌpan.təˈfaɪf] | |||
6 Soxisix [ˌsɔk.siˈsɪks] | |||
7 Setteseven [ˌsɛ.təˈsɛv.ən] | |||
8 Oktoeight [ˌɔk.toʊˈeɪt] | |||
9 [lower-alpha 6] Novenine [ˌnoʊ.veˈnaɪ.nə] | |||
Various | |||
1st Substitute | Used to repeat the first flag of a hoist later within the same hoist. This and the other two substitutes allows any four letter or number combination to be sent using only one set of flags. | ||
2nd Substitute | Used to repeat the second flag of a hoist later within the same hoist. | ||
3rd Substitute | Used to repeat the third flag of a hoist later within the same hoist. | ||
Code/Answer Pennant | At the dip (about half-way up the halyard): Ready to receive message Close up: Message has been received and understood (the flag is then hauled back at the dip to receive the next hoist) Hauled down: Signals end of message. With numerals: Decimal point By a warship: When flown over a hoist, indicates the message is to be read according to the ICS. |
Morse code is a method used in telecommunication to encode text characters as standardized sequences of two different signal durations, called dots and dashes, or dits and dahs. Morse code is named after Samuel Morse, one of the early developers of the system adopted for electrical telegraphy.
The (International) Radiotelephony Spelling Alphabet, commonly known as the NATO phonetic alphabet, is the most widely used set of clear code words for communicating the letters of the Roman alphabet. Technically a radiotelephonic spelling alphabet, it goes by various names, including NATO spelling alphabet, ICAO phonetic alphabet and ICAO spelling alphabet. The ITU phonetic alphabet and figure code is a rarely used variant that differs in the code words for digits.
The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication and later adopted by other radio services, especially amateur radio. To distinguish the use of a Q-code transmitted as a question from the same Q-code transmitted as a statement, operators either prefixed it with the military network question marker "INT" or suffixed it with the standard Morse question mark UD.
SOS is a Morse code distress signal, used internationally, originally established for maritime use. In formal notation SOS is written with an overscore line, to indicate that the Morse code equivalents for the individual letters of "SOS" are transmitted as an unbroken sequence of three dots / three dashes / three dots, with no spaces between the letters. In International Morse Code three dots form the letter "S" and three dashes make the letter "O", so "S O S" became a common way to remember the order of the dots and dashes. IWB, VZE, 3B, and V7 form equivalent sequences, but traditionally SOS is the easiest to remember.
The Allied military phonetic spelling alphabets prescribed the words that are used to represent each letter of the alphabet, when spelling other words out loud, letter-by-letter, and how the spelling words should be pronounced for use by the Allies of World War II. They are not a "phonetic alphabet" in the sense in which that term is used in phonetics, i.e. they are not a system for transcribing speech sounds.
Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in citizens band (CB) radio transmissions. The police version of ten-codes is officially known as the APCO Project 14 Aural Brevity Code.
The APCO phonetic alphabet, a.k.a. LAPD radio alphabet, is the term for an old competing spelling alphabet to the ICAO radiotelephony alphabet, defined by the Association of Public-Safety Communications Officials-International from 1941 to 1974, that is used by the Los Angeles Police Department (LAPD) and other local and state law enforcement agencies across the state of California and elsewhere in the United States. It is the "over the air" communication used for properly understanding a broadcast of letters in the form of easily understood words. Despite often being called a "phonetic alphabet", it is not a phonetic alphabet for transcribing phonetics.
The Global Maritime Distress and Safety System (GMDSS) is a worldwide system for automated emergency signal communication for ships at sea developed by the United Nations' International Maritime Organization (IMO) as part of the SOLAS Convention.
International maritime signal flags are various flags used to communicate with ships. The principal system of flags and associated codes is the International Code of Signals. Various navies have flag systems with additional flags and codes, and other flags are used in special uses, or have historical significance.
Radiotelephony procedure includes various techniques used to clarify, simplify and standardize spoken communications over two-way radios, in use by the armed forces, in civil aviation, police and fire dispatching systems, citizens' band radio (CB), and amateur radio.
Flag signals can mean any of various methods of using flags or pennants to send signals. Flags may have individual significance as signals, or two or more flags may be manipulated so that their relative positions convey symbols. Flag signals allowed communication at a distance before the invention of radio and are still used especially in connection with ships.
A Radio code is any code that is commonly used over a telecommunication system such as Morse code, brevity codes and procedure words.
Procedural signs or prosigns are shorthand signals used in Morse code telegraphy, for the purpose of simplifying and standardizing procedural protocols for land-line and radio communication. The procedural signs are distinct from conventional Morse code abbreviations, which consist mainly of brevity codes that convey messages to other parties with greater speed and accuracy. However, some codes are used both as prosigns and as single letters or punctuation marks, and for those, the distinction between a prosign and abbreviation is ambiguous, even in context.
A spelling alphabet is a set of words used to represent the letters of an alphabet in oral communication, especially over a two-way radio or telephone. The words chosen to represent the letters sound sufficiently different from each other to clearly differentiate them. This avoids any confusion that could easily otherwise result from the names of letters that sound similar, except for some small difference easily missed or easily degraded by the imperfect sound quality of the apparatus. For example, in the Latin alphabet, the letters B, P, and D sound similar and could easily be confused, but the words "bravo", "papa" and "delta" sound completely different, making confusion unlikely.
Flag semaphore is a semaphore system conveying information at a distance by means of visual signals with hand-held flags, rods, disks, paddles, or occasionally bare or gloved hands. Information is encoded by the position of the flags; it is read when the flag is in a fixed position. Semaphores were adopted and widely used in the maritime world in the 19th century. It is still used during underway replenishment at sea and is acceptable for emergency communication in daylight or using lighted wands instead of flags, at night.
Code letters or ship's call sign were a method of identifying ships before the introduction of modern navigation aids and today also. Later, with the introduction of radio, code letters were also used as radio call signs.
Maritime flag signalling, generally flaghoist signalling, is the principal means other than radio by which ships communicate to each other or to shore. Virtually all signalling by non-naval vessels is now organized under the International Code of Signals, which specifies a standard set of flags and codes. Naval vessels generally use an extended set of flags and their own codes. This article will touch on the historical development of maritime flag signalling.
Naval flag signalling covers various forms of flag signalling, such as semaphore or flaghoist, used by various navies; distinguished from maritime flag signalling by merchant or other non-naval vessels or flags used for identification.
A ship identifier refers to one of several types of identifiers used for maritime vessels. An identifier may be a proper noun ; a proper noun combined with a standardized prefix based on the type of ship ; a serial code; a unique, alphanumeric ID ; or an alphanumeric ID displayed in international signal flags. Some identifiers are permanent for a ship while others may be changed at the owners' discretion although regulatory agencies will need to approve the change. Modern ships will usually have several identifiers.