New South Wales F351 class locomotive

Last updated

New South Wales F351 Class
NSWGR Locomotive F.351 Class.jpg
F351 Class Locomotive
Type and origin
Power typeSteam
Builder Beyer, Peacock & Company (12)
Henry Vale (6)
Order numberBP: 6617
Serial numberBP: 2657–2668
Build date1884–1887
Total produced18
Specifications
Configuration:
   Whyte 2-4-0 T
   UIC 1B n2t
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Fuel type Coal
Firebox:
  Grate area14 sq ft (1.3 m2)
Boiler pressure140 lbf/in2 (970 kPa)
Cylinders 2 inside
Cylinder size 15 in × 22 in (381 mm × 559 mm)
Performance figures
Tractive effort 9,089 lbf (40.4 kN)
Career
Operators New South Wales Government Railways
NumbersOriginal: 351-368
Post 1924: 1031-1033, 1035-1037, 1039-1043
Preserved1033, 1042
Disposition2 preserved, 16 scrapped

The F351 class (X10 post 1924) was a class of steam locomotives built for the New South Wales Government Railways in Australia.

Contents

History

The locomotives were originally ordered in 1879, but the order was cancelled. [1] A follow-up order in 1882 was made, the specification originally for 2-4-0 T locomotives with 5 ft 0 in diameter driving wheels made by the acting locomotive engineer Mr Scott. During his absence in England on official business, this was changed by Mr T. Middelton to an 0-6-0 type with 4 ft 0 in diameter driving wheels, claiming that such locomotives would be capable of 30-33 mph in service. Despite Scott's protests, Commissioner Goodchap approved the changes and six locomotives were designed and built by Vulcan Foundry. The subsequent 0-6-0 locomotives became the R(285) class, later the Z18 class. [2]

In August 1884, Scott informed the commissioner that more locomotives were required with the opening of the Illawarra extension. Mr Middelton wanted more of the R(285 class), but Mr Scott recommended his original proposed design from 1881. After much hesitation by the government, Beyer, Peacock & Company were asked to design and build the locomotives. These became the F351 class and went into service on the Sydney suburban network in 1885-86, being numbered 351 to 362. In 1887, six more locomotives of this design (numbered 363 to 368) were delivered by Henry Vale of Sydney. No. 366 was involved in the Redfern collision of 1894. The design was extremely similar to a number of 2-4-0 T locomotives supplied to the Isle of Wight Central Railway from 1864. A similar locomotive was delivered to the South Australian Railways from 1884 as its P class. [2]

Their running life came to an end in 1901 as a result of the findings on the Sydenham derailment involving No. 363 and the whole class was taken out of passenger work. The F351 class were known to oscillate and rock at high speeds and were officially limited to 30 mph. A factor in the Sydenham derailment was the driver exceeding the official speed limit. The locomotive was believed to be doing 51 mph when the accident occurred. The entire class was subsequently withdrawn from passenger work and allocated to various shunting, yard, and depot duties. A number of the class were modified with a heavy cast iron front buffer beam in an attempt to stabilise the front of the locomotive after 1901. [3] Between 1906 and 1929, ten of the class were sold to various private railway operators. [2]

All members of the class had been withdrawn from passenger work by 1914. Eleven were still on the books at this stage and were renumbered Lo.19-Lo.26 (Lo. Indicated that they were no longer in revenue-earning service). As part of the 1924 reclassification scheme they became members of the X10 class, bearing numbers 1031-1033, 1035-1037 and 1039-1043. From 1914, members of the class still in NSWGR service were rebuilt with the same domed boilers that replaced the dome-less type originally supplied on the R285 class. A number of other modifications were made to the class such as replacing the leaf spring on the front axle with twin coil springs. [2]

Three of the class were still in service with the NSWGR from 1940. 1033 at Eveleigh Railway Workshops, 1036 at Junee Locomotive Depot (withdrawn and scrapped in 1966) and 1042 at Cardiff Locomotive Workshops. 1042 was given an overhaul as late as 1970 at the age of 83 years and continued working until February 1973, [4] [5] only three months shy of 86 years in service and having completed 401,359 km (249,446 miles) of logged running. 1036 (F359) had accumulated the most mileage in service with 707,564 kilometres (437,889 miles) at withdrawal. [6]

Preservation

Two have been preserved:

Related Research Articles

<span class="mw-page-title-main">New South Wales C38 class locomotive</span> Class of Australian 4-6-2 locomotives

The C38 class was a class of steam locomotive built for the New South Wales Government Railways in Australia.

<span class="mw-page-title-main">2-6-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-6-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, six powered and coupled driving wheels on three axles and no trailing wheels. This arrangement is commonly called a Mogul.

<span class="mw-page-title-main">2-4-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-4-0 represents the wheel arrangement of two leading wheels on one axle, four powered and coupled driving wheels on two axles and no trailing wheels. In most of North America it became known as a Porter.

<span class="mw-page-title-main">Locomotive No. 1</span>

Locomotive No. 1 hauled the first passenger train in New South Wales, Australia. It was built by Robert Stephenson and Company. In 1846, the Sydney Railway Company was formed with the objective of building a railway line between Sydney and Parramatta. No. 1 was one of four locomotives that arrived by sea from the manufacturer in January 1855. The first passenger train hauled by No. 1 was a special service from Sydney Station to Long Cove viaduct on 24 May 1855, Queen Victoria's birthday.

<span class="mw-page-title-main">Midland Railway 2441 Class</span>

The Midland Railway (MR) 2441 Class was a class of 0-6-0T steam locomotives. They were introduced by Samuel Johnson in 1899, originally with round-topped fireboxes. Henry Fowler later rebuilt them with Belpaire fireboxes. They were given the power classification 3F. The LMS Fowler Class 3F of 1924 was based on this design.

<span class="mw-page-title-main">SR U class</span> Class of 50 two-cylinder 2-6-0 locomotives

The SR U class are 2-6-0 steam locomotives designed by Richard Maunsell for passenger duties on the Southern Railway (SR). The class represented the penultimate stage in the development of the Southern Railway's 2-6-0 "family", which improved upon the basic principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward for Great Western Railway (GWR) locomotives. The U class design drew from experience with the GWR 4300s and N classes, improved by applying Midland Railway ideas to the design, enabling the SECR to influence development of the 2-6-0 in Britain.

The Midland Railway 1000 Class is a class of 4-4-0 steam locomotive designed for passenger work. They were known to reach speeds of up to 85 mph.

<span class="mw-page-title-main">Metropolitan Railway A Class</span>

The Metropolitan Railway A Class and B Class were 4-4-0T condensing steam locomotives built for the Metropolitan Railway by Beyer Peacock, first used in 1864. A total of 40 A Class and 26 of the slightly different B Class were delivered by 1885. Used underground, the locomotives condensed their steam, and coke or smokeless coal was burnt to reduce the smoke.

<span class="mw-page-title-main">Spirit of Progress</span> Victorian Railways express passenger train

The Spirit of Progress was the premier express passenger train on the Victorian Railways in Australia, running from Melbourne to the New South Wales border at Albury, and later through to Sydney.

<span class="mw-page-title-main">NZR D class (1874)</span>

NZR D class steam tank locomotives operated on New Zealand's national railway network. The first entered service in 1874 all had been withdrawn by the end of 1927, which allowed the D classification to be used again in 1929.

The railways of New South Wales, Australia, use a large variety of passenger and freight rolling stock. The first railway in Sydney was opened in 1855 between Sydney and Granville, now a suburb of Sydney but then a major agricultural centre. The railway formed the basis of the New South Wales Government Railways. Passenger and freight services were operated from the beginning. By 1880, there was a half hourly service to Homebush.

The DD class (later reclassified into D1, D2 and D3 subclasses) was a passenger and mixed traffic steam locomotive that ran on Victorian Railways from 1902 to 1974. Originally introduced on mainline express passenger services, they were quickly superseded by the much larger A2 class and were relegated to secondary and branch line passenger and goods service, where they gave excellent service for the next fifty years. The DD design was adapted into a 4-6-2T tank locomotive for suburban passenger use, the DDE (later D4) class. They were the most numerous locomotive class on the VR, with a total of 261 DD and 58 locomotives built.

<span class="mw-page-title-main">New South Wales C36 class locomotive</span> Class of Australian 4-6-0 locomotives

The New South Wales C36 class was a class of two-cylinder, simple, non-condensing, coal-fired superheated, 4-6-0 express passenger steam locomotives built by Eveleigh Railway Workshops and Clyde Engineering for the New South Wales Government Railways in Australia.

<span class="mw-page-title-main">New South Wales C35 class locomotive</span> Class of Australian 4-6-0 locomotives

The C35 class was a class of steam locomotives built by Eveleigh Railway Workshops between 1914 and 1923 for the New South Wales Government Railways in Australia. Despite their elegant, somewhat English looking appearance, they suffered a long period of teething troubles and were poor performers, especially on long climbs.

<span class="mw-page-title-main">New South Wales Z17 class locomotive</span> Class of Australian 4-4-0 locomotives

The 17 class was a class of steam locomotive built by the Vulcan Foundry for the New South Wales Government Railways of Australia.

<span class="mw-page-title-main">New South Wales C30 class locomotive</span>

The C30 class is a class of steam locomotives built by Beyer, Peacock & Company and Eveleigh Railway Workshops for the New South Wales Government Railways (NSWGR) of Australia.

<span class="mw-page-title-main">New South Wales Z18 class locomotive</span> Australian steam locomotive class

The Z18 class was a class consisting of six 0-6-0T steam tank locomotives built by Vulcan Foundry for the New South Wales Government Railways of Australia.

<span class="mw-page-title-main">Barry Railway Class C</span>

Barry Railway Class C were originally 2-4-0T steam locomotives of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by Sharp Stewart.

<span class="mw-page-title-main">New South Wales X10 class locomotive</span>

The X10 class is a class of steam locomotives previously operated by the New South Wales Government Railways of Australia.

<span class="mw-page-title-main">Commonwealth Railways F Class</span> American built locomotive used in Australia

The Commonwealth Railways F Class was a 2-6-0 tender engine built by the Baldwin Locomotive Works in 1885 for the New South Wales Government Railways as their K.294 class and later sold to the Commonwealth Railways becoming their F class.

References

  1. Forsyth, J.H. (1974) "Steam Locomotive Data"
  2. 1 2 3 4 Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society. pp. 74, 75, 85, 86. ISBN   0-909650-27-6.
  3. "State Heritage Inventory". 22 October 2019.
  4. Here & There Australian Railway Historical Society Bulletin issue 428 June 1973 page 3
  5. Oberg, Leon (2007). Locomotives of Australia: 1850s - 2007. Rosenberg Publishing. p. 73. ISBN   1-877058-54-8.
  6. Forsyth, J.H. (1974) "Steam Locomotive Data"
  7. Locomotive, Steam 1033 1033 Office of Environment & Heritage
  8. NSWRTM Steam Locomotive exhibits
  9. 1042 Australian Steam

Commons-logo.svg Media related to New South Wales F351 class locomotives at Wikimedia Commons