Sydney Trains M set

Last updated

M set
M10approachingCentral.jpg
M10 approaching Sydney Central in March 2024
M set lower deck cityrail.jpg
Lower deck interior in 2011
In service2002–present
Manufacturer EDi Rail
Built at Cardiff
Replaced Tulloch carriages
Constructed2002–2005
Entered service1 July 2002
Refurbished2024-present
Number built141 carriages
Number in service140 carriages
Formation35 4-car sets
Fleet numbers
  • D1001–D1041, D1043–D1060, D1062–D1073 (driving trailers)
  • N1501–N1540, N1543–N1560, N1562–N1573 (motor cars)
  • M1–M35 (full 4-car sets)
Capacity452
Operators Sydney Trains
Depots Auburn
Lines served
Specifications
Car body constructionStainless steel
Train length81.55 m (267 ft 6+58 in)
Car length
  • 20,532 mm (67 ft 4+38 in) (D)
  • 20,243 mm (66 ft 5 in) (N)
Width3.03 m (9 ft 11+14 in)
Height4,381 mm (14 ft 4+12 in)
DoorsPlug-style, 2 per side
Wheel diameter940 mm (37 in)
Maximum speed
  • 143 km/h (89 mph) (design)
  • 130 km/h (81 mph) (service)
Weight207 t (204 long tons; 228 short tons)
Traction systemAlstom ONIX 1500 2-level IGBTVVVF [1]
Traction motors 8 × Alstom 4-EXA-2144 226 kW (303 hp) 3-phase AC induction motor
Power output1,808 kW (2,425 hp)
Electric system(s) 1,500 V DC (nominal) from overhead catenary
Current collector(s) Pantograph
UIC classification 2′2′+Bo′Bo′+Bo′Bo′+2′2′
Braking system(s) Automatic air, electropneumatic and regenerative
Coupling system Scharfenberg coupler
Track gauge 1,435 mm (4 ft 8+12 in) standard gauge

The Sydney Trains M sets, also referred to as the Millennium trains, are a class of electric multiple units (EMU) that operate on the Sydney Trains network. Built by EDi Rail between 2002 and 2005, the first sets initially entered service under the CityRail brand on 1 July 2002 after short delays due to electrical defects. [2] [3] The M sets were built as "fourth generation" trains for Sydney's suburban rail fleet, replacing the 1960s Tulloch carriages and providing extra capacity on the suburban rail network. [4] The sets currently operate on the T2 Leppington & Inner West, T3 Liverpool & Inner West, T5 Cumberland, T6 Lidcombe & Bankstown, T7 Olympic Park and T8 Airport & South lines.

Contents

Design

Vestibule Millennium train vestibule3.jpg
Vestibule

The Millennium train, just like the entire Sydney Trains fleet and electric NSW TrainLink fleet, is a double decker. It is a four car consist, with the middle two cars being non-control motor cars and the two outer cars being driving control trailer cars fitted with the pantograph. [5] The Millennium train was the first to be equipped with an AC drive system unlike the Tangara, which has a DC drive system. The sets usually operate in eight-car formations with two four-car sets combined. While the Millennium train concept is an evolution of the Tangara concept (manufactured by A Goninan & Co), the Millennium train introduced new features such as internal electronic destination indicators, automated digital voice announcements for upcoming stops, a return to reversible seating, surveillance cameras, wider stairways, a new safety yellow colour scheme, and push-button opened internal doors. The Millennium Train also introduced crumple zones to absorb impact in a collision. Interiors were designed by Transport Design International. [6]

The train also features emergency help points, allowing passengers to contact the train crew in an emergency. The help points are located on the sides of the stairwell to the upper deck. There are actually two help points in the same location, with a large one at face height with a microphone and speaker, and a lower one with a microphone only. There are also emergency door releases which were retrofitted to the trains. These allow passengers to manually open the doors in an emergency, as recommended in the report for the Waterfall rail accident. The retrofit program was stated as having been completed in November 2014. [7]

Like with the T, A and B sets, the M sets feature Scharfenberg couplers. [8]

M sets are 3.03 metres (9 ft 11+14 in) wide, being classed by Transport for NSW as medium width trains, which allows them to operate within the whole Sydney Trains suburban network. [9]

Unlike sets M2–M35, set M1 has a slightly different interior design with differently coloured doors and different seat handles for unknown reasons.

Delivery

Stairwell Sydney Trains 'Millennium' Train 20150124 175516.jpg
Stairwell

The cars were constructed by EDi Rail at Cardiff Workshops. The contract included a 15-year maintenance agreement with EDi Rail to maintain the trains at a specialised maintenance centre at Eveleigh. During testing and initial revenue service, they ran as four car sets, with eight car sets commencing service towards the end of 2002 after further testing. All 35 four car sets were delivered by October 2005.

The initial order signed in October 1998 was for 81 carriages, in December 2002 an option was taken up for an additional 60. [2] In February 2017, Sydney Trains exercised an option to extend Downer's maintenance of the trains for a further 10 years. [10]

Criticisms

The Millennium trains were criticised for having several technical problems and causing problems with Sydney Trains, they were referred to in the media reports as The "Mi-lemon" and "Millenni-Bug" as a result.[ citation needed ] Some of the problems were caused by insufficient power supply on the overhead to cope with the power demands of the more technologically advanced trains causing them to shut down. Software bugs also contributed to the trains' poor reliability.

The Millennium trains were withdrawn from service in April 2003 while the problems were being rectified and a full audit was carried out. [2] They were subsequently reintroduced into service in June 2003.

As of the new timetable since 20 October 2024, M Sets now run 8-car services on the T2 Leppington & Inner West, T3 Liverpool & Inner West, T5 Cumberland and T8 Airport & South lines, while also running 4-car services T5 Cumberland, T6 Lidcombe & Bankstown and T7 Olympic Park lines.

In service

External Carriage Camera Trial

Trial cameras M set external camera trial cityrail.jpg
Trial cameras

In late 2008, two Millennium trains were fitted with external cameras atop of carriages near the doors, testing their use for the then-future Waratah trains. These cameras were subsequently incorporated into the final design of the Waratah train. [11]

Lines serviced

The Millennium trains typically operate on the following lines (normally described as Sector 2):

Maintenance Depots

The trains were originally maintained at Eveleigh Maintenance Centre, they are now maintained at Auburn Maintenance Centre.

As with all other trains, these trains are not exclusively kept in Auburn overnight. They only need to return to the depot for maintenance, and at other times, they may be stabled at various yards on the lines that they operate, such as Blacktown, Liverpool and Rossmore yards.

Related Research Articles

<span class="mw-page-title-main">Airport & South Line</span> Rail service in Sydney, New South Wales

The Airport & South Line is a suburban commuter rail line in Sydney, Australia. It connects the Sydney central business district with the southwestern suburbs via Sydney Airport. The line is part of the Sydney Trains network. The line began operating on 26 November 2017, when the T2 Airport, Inner West & South Line was split in two. Sydney Trains' predecessor CityRail operated the Airport & East Hills Line over an identical route between 2000 and 2013.

<span class="mw-page-title-main">Warwick Farm railway station</span> Railway station in Sydney, New South Wales, Australia

Warwick Farm railway station is a heritage-listed railway station located on the Main Southern line, serving the Sydney suburb of Warwick Farm. It is served by Sydney Trains T2 Leppington & Inner West Line, T3 Liverpool & Inner West Line and T5 Cumberland line services.

<span class="mw-page-title-main">Glenfield railway station, Sydney</span> Railway station in Sydney, New South Wales, Australia

Glenfield railway station is a junction station serving the Sydney suburb of Glenfield in Australia. It is served by Sydney Trains T8 Airport & South, T2 Leppington & Inner West and T5 Cumberland line services, and by limited NSW TrainLink Southern Highlands Line services.

<span class="mw-page-title-main">Cumberland Line</span> Rail service in Sydney, New South Wales, Australia

The Cumberland Line is a commuter rail line operated by Sydney Trains in Sydney, New South Wales, Australia. It connects Schofields and Leppington stations in the western suburbs. Limited services extend from Schofields to Richmond. The line opened in 1996, following the construction of a 'Y-link' track between Harris Park and Merrylands stations. The intention of this link was to allow direct services to operate from the south west suburbs to Parramatta and Blacktown without requiring a change of trains at Granville. The line takes its name from the Cumberland Plain on which much of Western Sydney was built.

<span class="mw-page-title-main">Bankstown railway station</span> Railway station in Sydney, New South Wales

Bankstown railway station is a heritage-listed railway station on the Bankstown railway line in the Sydney suburb of Bankstown. It is currently the southern terminus of T6 Lidcombe & Bankstown services, and will in future be the southwestern terminus of M1 Metro North West & Bankstown services.

<span class="mw-page-title-main">Lidcombe railway station</span> Railway station in Sydney, New South Wales, Australia

Lidcombe railway station is a heritage-listed railway station located on the Main Suburban line, serving the Sydney suburb of Lidcombe. It is served by Sydney Trains T1 Western, T2 Leppington & Inner West, T3 Liverpool & Inner West Line, T6 Lidcombe & Bankstown Line and T7 Olympic line services.

<span class="mw-page-title-main">Merrylands railway station</span> Railway station in Sydney, New South Wales, Australia

Merrylands railway station is a heritage-listed railway station located on the Main South line, serving the Sydney suburb of Merrylands. It is served by Sydney Trains T2 Leppington & Inner West and T5 Cumberland line services.

<span class="mw-page-title-main">Berala railway station</span> Railway station in Sydney, New South Wales, Australia

Berala railway station is a heritage-listed railway station located on the Main Southern line, serving the Sydney suburb of Berala. It is served by Sydney Trains T3 Liverpool & Inner West Line and T6 Lidcombe & Bankstown Line services.

<span class="mw-page-title-main">New South Wales C set</span> Class of electric multiple unit operated in New South Wales

The C sets were a class of electric multiple units that operated on Sydney's suburban rail network from 1986 up until 2021. Built by A Goninan & Co between 1986 and 1987, they were introduced into service by the State Rail Authority, before later being operated under CityRail and Sydney Trains. A total of 56 carriages were built, with the last sets being withdrawn from service in February 2021, having been gradually replaced by Waratah A & B set trains.

<span class="mw-page-title-main">Regents Park railway station</span> Railway station in Sydney, New South Wales, Australia

Regents Park railway station is a heritage-listed railway station located on the Main Southern line, serving the Sydney suburb of Regents Park. The station is heritage-listed in the state heritage register for New South Wales. It is served by Sydney Trains T3 Liverpool & Inner West Line and T6 Lidcombe & Bankstown Line services.

<span class="mw-page-title-main">New South Wales S set</span> Class of electric multiple unit operating in New South Wales, Australia

The S sets are a class of electric multiple units (EMU) that operated on Sydney's suburban rail network from 1972 up until 2019. Originally entering service under the Public Transport Commission, the sets also operated under the State Rail Authority, CityRail and Sydney Trains. Prior to their retirement, the S sets were the last class in the Sydney Trains fleet to not be air-conditioned, earning them the nicknames "Tin cans" and "Sweat Sets". They were also nicknamed "Ridgys" because of their fluted ("ridged") stainless steel panelling; they shared this nickname with similar looking K sets and C sets. Their stainless steel appearance was also shared with the intercity V sets and U sets. All remaining sets were withdrawn from service in June 2019.

The Sydney Trains fleet serves the metropolitan and intercity lines within Sydney, Australia. Most of the rolling stock are double-deck electric multiple units, while some are single-deck diesel multiple units and operate mainly as eight carriage sets, with some operating in four.

<span class="mw-page-title-main">Edmondson Park railway station</span> Railway station in Sydney, New South Wales, Australia

Edmondson Park railway station is a station on the South West Rail Link which serves the south-western Sydney suburb of Edmondson Park. It opened on 8 February 2015. It is part of the Sydney Trains network, with T2 Leppington & Inner West Line and T5 Cumberland Line services.

<span class="mw-page-title-main">Leppington railway station</span> Railway station in Sydney, New South Wales, Australia

Leppington railway station is the terminus of the South West Rail Link which serves the south-western Sydney suburb of Leppington. It opened on 8 February 2015. A ten road stabling facility is located to the west of the station at Rossmore. It is serviced by Sydney Trains' T2 Leppington & Inner West Line and T5 Cumberland Line services.

<span class="mw-page-title-main">Sydney Trains</span> Operator of passenger rail services in and around Sydney

Sydney Trains is the brand name and operator of suburban and intercity train services centring on Greater Sydney in New South Wales, Australia.

<span class="mw-page-title-main">Leppington & Inner West Line</span> Rail service in Sydney, New South Wales, Australia

The Leppington & Inner West Line is a commuter rail service operated by Sydney Trains, serving the inner west and south-western regions of Sydney, Australia. Consisting of 37 stops, the service commences from the City Circle, then heads west to Granville. The line branches at this point; services either head northwest to Parramatta or south to Leppington. A third terminus at Homebush is used when the part-time Parramatta branch is not operating. The line commenced operations on 26 November 2017, replacing the T2 Airport, Inner West & South Line.

<span class="mw-page-title-main">Bankstown railway line</span> Railway line in Sydney, New South Wales, Australia

The Bankstown railway line is a suburban railway which traverses the Inner West and Canterbury-Bankstown areas of Sydney. West of Bankstown it is used by T6 Lidcombe & Bankstown services, while east of Bankstown it is temporarily closed to facilitate conversion for its future use by M1 North West & Bankstown services.

<span class="mw-page-title-main">Olympic Park railway line</span> Railway line in Sydney, Australia

The Olympic Park railway line is a railway line linking the Sydney Olympic Park precinct to the Main Suburban railway line at Flemington and Lidcombe. Originally opened as the Abattoirs branch in 1911, it was rebuilt and reopened as the Olympic Park railway line in 1998. Passenger services have since been running on it as the Olympic Park Line.

The Lidcombe & Bankstown Line is a commuter rail service operated by Sydney Trains in Sydney, Australia. The service runs between Lidcombe and Bankstown via the Main Southern railway line and the Bankstown railway line.

<span class="mw-page-title-main">Liverpool & Inner West Line</span> Rail service in Sydney, New South Wales, Australia

The Liverpool & Inner West Line is a commuter rail service operated by Sydney Trains in the Inner West and Western suburbs of Sydney. It operates from the City Circle to Liverpool via the Main Suburban railway line to Lidcombe and the Main Southern railway line from there to Liverpool.

References

  1. Connolly, Helen (7 November 2002). "Major supplier for Sydney's Millennium Trains". Alstom . Archived from the original on 21 August 2021. Retrieved 21 August 2021.
  2. 1 2 3 RJ Sendt (June 2003). "Performance Audit - The Millennium Train Project" (PDF). The Audit Office of New South Wales. Archived from the original (PDF) on 22 August 2011. Retrieved 24 September 2007.
  3. Darren Goodsir (16 April 2002). "Signal failure? No, it's just the Millennium train picking up steam". The Sydney Morning Herald. Archived from the original on 8 November 2012. Retrieved 31 August 2011.
  4. "Concept drawings for the 4th Generation 'Millennium' train". collection.maas.museum. Archived from the original on 24 October 2021. Retrieved 15 October 2021.
  5. Millennium Trains Archived 12 June 2018 at the Wayback Machine Transport for NSW
  6. "millennium". Axis Communications. Archived from the original on 16 February 2011. Retrieved 20 July 2013.
  7. "Waterfall SCOI Annual Status Report" (PDF). March 2019. Archived (PDF) from the original on 28 January 2020. Retrieved 28 January 2020.
  8. "Exhibit 3 - Railcorp Train Performance Specification" (PDF). transport.nsw.gov.au. 17 January 2011. Archived (PDF) from the original on 21 April 2018. Retrieved 16 September 2018.
  9. Train Operating Conditions (TOC) Manual - General Instructions (PDF). Asset Standards Authority. Transport for NSW. 2019. pp. 42, 242. Archived (PDF) from the original on 27 October 2019. Retrieved 27 October 2019.
  10. Downer signs $225m M-set maintenance extension Archived 5 March 2017 at the Wayback Machine Rail Express 3 March 2017
  11. "Platform Guards Irrelevant Ecotransit". Archived from the original on 26 July 2011. Retrieved 8 July 2011.

Further reading