6029

Last updated

6029
AD6029 crossing the viaduct in North Wagga.jpg
6029 at Wagga Wagga in June 2015
Type and origin
Power typeSteam
Builder Beyer, Peacock & Company, Manchester
Serial number7531
Build date1954
Specifications
Configuration:
   Whyte 4-8-4+4-8-4
Gauge 1,435 mm (4 ft 8+12 in) standard gauge
Driver dia.4 ft 7 in (1,397 mm)
Adhesive weight 282,000 lb (128 t) or 317,000 lb (144 t)
Loco weight562,000 lb (255 t) or 582,000 lb (264 t)
Fuel type Coal
Fuel capacity14 long tons (14 t), later 18 long tons (18 t)
Firebox:
  Grate area65 sq ft (6.0 m2)
Boiler pressure200 psi (1.38 MPa)
Heating surface3,030 sq ft (281 m2)
Superheater:
  Heating area750 sq ft (70 m2)
Cylinders Four
Cylinder size 19+14 in × 26 in
(489 mm × 660 mm)
or19+78 in × 26 in
(505 mm × 660 mm)
Valve gear Walschaerts
Performance figures
Tractive effort 59,560 lbf (264.9 kN)
Factor of adh. 4.73 or 4.99
Career
Operators New South Wales Government Railways
Class AD60
Numbers6029
First run24 April 1954
WithdrawnSeptember 1972
Current owner Transport Heritage NSW
DispositionOperational

6029 is a four-cylinder, simple, non-condensing, superheated, articulated 4-8-4+4-8-4 Garratt steam locomotive, of the AD60 class, built by Beyer, Peacock & Company, Manchester, England, for the New South Wales Government Railways.

Contents

Service

6029 entered service in 1954 on the Main North line also working on the Main South and later Main Western line. On 17 February 1959 the locomotive was converted to dual control and had an extension to the coal bunker, increasing its coal capacity. [1]

It was withdrawn in September 1972 and condemned on 4 January 1973. In 1974, the National Museum of Australia acquired the locomotive and placed it in the custody of the Australian Railway Historical Society's Canberra Railway Museum. It worked from Sydney to Goulburn in December 1974 before hauling a special charter to Canberra on 5 January 1975. [2] [3]

It was restored to operational condition and operated heritage trains for the Canberra Railway Museum. 6029 became the only locomotive of its class to operate interstate when it visited Victoria in 1980, participating in a parallel run to Wangaratta with Victorian Railways locomotive K153. [4] Heritage tours continued over several years until boiler problems caused the locomotive to be withdrawn from service in 1981. [1] [5]

In 1994, a feasibility study determined what was needed to get 6029 back in steam. [6] In February 1998, ownership passed to the Canberra Railway Museum. [7]

A replacement boiler was obtained from a Victorian sawmill. Restoration commenced in 2007, being completed in July 2014. After mainline trials, 6029 received official mainline accreditation in December 2014, with the first public trips taking place on 28 February 2015. [1] [8] [9] [10]

On 23 February 2015, the locomotive was named City of Canberra by Shane Rattenbury, the Speaker of the ACT Legislative Assembly. [1] [11] [12] In 2017, it was put up for sale by the liquidator of the Canberra Railway Museum when the museum went into liquidation and was purchased by Phillip Davis and David Sommerville and moved to the NSW Rail Museum. [13] [14] [15] [16]

Due to the locomotive no longer being based in Canberra, its City of Canberra nameplates were removed in late 2017, and given to two unnamed people.[ citation needed ] This was due to the locomotive no longer based in Canberra and for historic reasons as the AD60s were barred from travelling though single line tunnels during their service, of which three exist between Bungendore and Queanbeyan on the Bombala railway line.

On 7 May 2022, Transport Heritage NSW announced that it had purchased 6029. [17] [18]

Related Research Articles

<span class="mw-page-title-main">Garratt locomotive</span> Articulated steam locomotive

A Garratt locomotive is a type of steam locomotive invented by British engineer Herbert William Garratt that is articulated into three parts. Its boiler, firebox, and cab are mounted on a centre frame or "bridge". The two other parts, one at each end, have a pivot to support the central frame; they consist of a steam engine unit – with driving wheels, trailing wheels, valve gear, and cylinders, and above it, fuel and/or water storage.

<span class="mw-page-title-main">Beyer, Peacock and Company</span> Railway locomotive manufacturer

Beyer, Peacock and Company was an English railway locomotive manufacturer with a factory in Openshaw, Manchester. Founded by Charles Beyer, Richard Peacock and Henry Robertson, it traded from 1854 until 1966. The company exported locomotives, and machine tools to service them, throughout the world.

<span class="mw-page-title-main">Tasmanian Government Railways K class</span> Class of 2 Garratt locomotives

The Tasmanian Government Railways K class was a class of 0-4-0+0-4-0 Garratt locomotives operated by the Tasmanian Government Railways from 1909 – the first Garratt locomotives built.

<span class="mw-page-title-main">NSW Rail Museum</span> Railway museum in New South Wales, Australia

The NSW Rail Museum is the main railway museum in New South Wales, Australia. A division of Transport Heritage NSW, it was previously known as the New South Wales Rail Transport Museum (NSWRTM), Rail Heritage Centre and Trainworks.

<span class="mw-page-title-main">3801</span> Preserved Australian C-38 class 4-6-2 locomotive

3801 is a 4-6-2 steam locomotive operated by the New South Wales Government Railways between 1943 and 1974. It is arguably Australia's most famous steam locomotive, being the only one to have visited all mainland states and territories.

<span class="mw-page-title-main">4-6-2+2-6-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, a 4-6-2+2-6-4 is a Garratt or Union Garratt articulated locomotive using a pair of 4-6-2 engine units back to back, with the boiler and cab suspended between them. The 4-6-2 wheel arrangement of each engine unit has four leading wheels on two axles, usually in a leading bogie, six powered and coupled driving wheels on three axles, and two trailing wheels on one axle, usually in a trailing truck.

<span class="mw-page-title-main">2-6-0+0-6-2</span> Garratt locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-6-0+0-6-2 represents the wheel arrangement of an articulated locomotive with two separate swivelling engine units, arranged back to back with the boiler and cab suspended between them. Each engine unit has two leading wheels in a leading truck, six powered and coupled driving wheels on three axles and no trailing wheels.

<span class="mw-page-title-main">4-8-4+4-8-4</span> Garratt locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. Each engine unit has two pairs of leading wheels in a leading bogie, followed by four coupled pairs of driving wheels and two pairs of trailing wheels in a trailing bogie.

<span class="mw-page-title-main">South African Class GL 4-8-2+2-8-4</span>

The South African Railways Class GL 4-8-2+2-8-4 of 1929 was an articulated steam locomotive.

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, a 4-8-2+2-8-4 is a Garratt articulated locomotive consisting of a pair of 4-8-2 engine units back to back, with the boiler and cab suspended between them. The 4-8-2 wheel arrangement has four leading wheels on two axles, usually in a leading bogie, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. Since the 4-8-2 type is generally known as a Mountain, the corresponding Garratt type is usually known as a Double Mountain.

<span class="mw-page-title-main">New South Wales X200 class locomotive</span>

The X200 class were a class of rail tractors introduced in 1963 and operated by the New South Wales Government Railways of Australia. They were a development of the smaller and less numerous X100 class. The X200 class remained in service until 1990 when they were either withdrawn or sold off to private companies, and some remain operational today.

<span class="mw-page-title-main">New South Wales Z12 class locomotive</span>

The New South Wales Z12 class was a class of 4-4-0 steam locomotives operated by the New South Wales Government Railways of Australia.

<span class="mw-page-title-main">New South Wales AD60 class locomotive</span>

The New South Wales AD60 class were Beyer-Garratt patent articulated four-cylinder, simple, non-condensing, coal-fired superheated, 4-8-4+4-8-4 heavy goods steam locomotives built by Beyer, Peacock & Company for the New South Wales Government Railways in Australia.

<span class="mw-page-title-main">3642</span>

Locomotive 3642 is a two-cylinder, simple, non-condensing, coal-fired superheated, 4-6-0 36 class express passenger steam locomotive built for the New South Wales Government Railways in 1926 by Clyde Engineering. It is one of three 36 class locomotives that were preserved.

<span class="mw-page-title-main">3265</span>

3265 is a preserved former New South Wales Government Railways C32 class steam locomotive. Built in 1902 by Beyer, Peacock & Company, England, it is owned by the Powerhouse Museum and based at the NSW Rail Museum, Thirlmere.

<span class="mw-page-title-main">Canberra Railway Museum</span> Railway museum in Kingston, Canberra

The Canberra Railway Museum is located at Kingston in the Australian Capital Territory next to Canberra railway station on the Bombala railway line. Since May 2018, Canberra Railway Museum has been the trading name of a not-for-profit company, Capital Region Heritage Rail Limited, established to run the museum, while ACT Heritage Rail Holdings Limited is the company responsible for safeguarding the heritage assets of the museum.

<span class="mw-page-title-main">Queensland Beyer-Garratt class</span> Class of 30 Australian 4-8-2+2-8-4 locomotives

The Queensland Railways Beyer-Garratt class locomotive was a class of 4-8-2+2-8-4 steam locomotives operated by the Queensland Railways.

The South African Railways Class GA 2-6-0+0-6-2 of 1921 was an articulated steam locomotive.

<span class="mw-page-title-main">South African Class GB 2-6-2+2-6-2</span> Articulated steam locomotive

The South African Railways Class GB 2-6-2+2-6-2 of 1921 was an articulated steam locomotive.

<span class="mw-page-title-main">Z1210</span>

1210 is a preserved former New South Wales Government Railways Z12 class steam locomotive. Built in 1878 by Beyer, Peacock & Company, England, it is preserved at the Canberra Railway Museum.

References

  1. 1 2 3 4 "Preserved Steam Locomotives Down Under - 6029". australiansteam.com. Retrieved 20 January 2021.
  2. 6029 Steams to Canberra, will be a National Museum Exhibit The Recorder January 1975 page 31
  3. Garratt's Last Fling The Railway Magazine issue 894 October 1975 page 493
  4. 6029 tour Continental Railway Journal issue 45 March 1981 page 249
  5. 6029 set to steam again Railway Digest February 2008 page 54
  6. AD60 Class Beyer Garatt Locomotives of the New South Wales Railways Locomotives International issue 24 June 1994 page 18
  7. Here & There Australian Railway Historical Society Bulletin issue 726 April 1998 page 154
  8. Gul, Jonathon; Nairn, Jessica (25 July 2014). "Massive restored steam train completes first test run". ABC News . Retrieved 20 January 2021.
  9. Project 6029 Project 6029 blog
  10. Beyer-Garratt 6029 Inaugural Trip Archived 5 November 2016 at the Wayback Machine Canberra Railway Museum
  11. Whitford, Richard, ed. (2015), Federal City Express, Canberra: ARHS(ACT div), p. 1
  12. Largest steam loco in southern hemisphere returns to action The Railway Magazine issue 1374 September 2015 page 118
  13. Walmsley, Hannah (13 July 2017). "Canberra Railway Museum forced to sell off historic train carriages". ABC News. Retrieved 20 January 2021.
  14. 1953 Beyer Garrett AD60 Class 4-8-4 + 4-8-4 Articulated Steam Locomotive Slattery Auctions Archived 4 September 2017 at the Wayback Machine
  15. New owners for Beyer-Garratt 6029 Railway Digest January 2018 page 54
  16. Australian Garratt saved and back on main line The Railway Magazine issue 1407 June 2018 page 94
  17. "Full steam ahead for Beyer-Garratt 6029". Transport Heritage NSW. 7 May 2022. Retrieved 7 May 2022.
  18. UK built Garratt recruited to museum fleet in bargain buy Heritage Railway issue 294 10 June 2022 page 28

Commons-logo.svg Media related to AD6029 at Wikimedia Commons