Positional notation

Last updated • 26 min readFrom Wikipedia, The Free Encyclopedia
Glossary of terms used in the positional numeral systems Positional notation glossary-en.svg
Glossary of terms used in the positional numeral systems

Positional notation, also known as place-value notation, positional numeral system, or simply place value, usually denotes the extension to any base of the Hindu–Arabic numeral system (or decimal system). More generally, a positional system is a numeral system in which the contribution of a digit to the value of a number is the value of the digit multiplied by a factor determined by the position of the digit. In early numeral systems, such as Roman numerals, a digit has only one value: I means one, X means ten and C a hundred (however, the values may be modified when combined). In modern positional systems, such as the decimal system, the position of the digit means that its value must be multiplied by some value: in 555, the three identical symbols represent five hundreds, five tens, and five units, respectively, due to their different positions in the digit string.

Contents

The Babylonian numeral system, base 60, was the first positional system to be developed, and its influence is present today in the way time and angles are counted in tallies related to 60, such as 60 minutes in an hour and 360 degrees in a circle. Today, the Hindu–Arabic numeral system (base ten) is the most commonly used system globally. However, the binary numeral system (base two) is used in almost all computers and electronic devices because it is easier to implement efficiently in electronic circuits.

Systems with negative base, complex base or negative digits have been described. Most of them do not require a minus sign for designating negative numbers.

The use of a radix point (decimal point in base ten), extends to include fractions and allows representing any real number with arbitrary accuracy. With positional notation, arithmetical computations are much simpler than with any older numeral system; this led to the rapid spread of the notation when it was introduced in western Europe.

History

Suanpan (the number represented in the picture is 6,302,715,408) Abacus 6.png
Suanpan (the number represented in the picture is 6,302,715,408)

Today, the base-10 (decimal) system, which is presumably motivated by counting with the ten fingers, is ubiquitous. Other bases have been used in the past, and some continue to be used today. For example, the Babylonian numeral system, credited as the first positional numeral system, was base-60. However, it lacked a real zero. Initially inferred only from context, later, by about 700 BC, zero came to be indicated by a "space" or a "punctuation symbol" (such as two slanted wedges) between numerals. [1] It was a placeholder rather than a true zero because it was not used alone or at the end of a number. Numbers like 2 and 120 (2×60) looked the same because the larger number lacked a final placeholder. Only context could differentiate them.

The polymath Archimedes (ca. 287–212 BC) invented a decimal positional system based on 108 in his Sand Reckoner; [2] 19th century German mathematician Carl Gauss lamented how science might have progressed had Archimedes only made the leap to something akin to the modern decimal system. [3] Hellenistic and Roman astronomers used a base-60 system based on the Babylonian model (see Greek numerals § Zero).

Before positional notation became standard, simple additive systems (sign-value notation) such as Roman numerals were used, and accountants in ancient Rome and during the Middle Ages used the abacus or stone counters to do arithmetic. [4]

Chinese rod numerals; Upper row vertical form
Lower row horizontal form Chounumerals.svg
Chinese rod numerals; Upper row vertical form
Lower row horizontal form

Counting rods and most abacuses have been used to represent numbers in a positional numeral system. With counting rods or abacus to perform arithmetic operations, the writing of the starting, intermediate and final values of a calculation could easily be done with a simple additive system in each position or column. This approach required no memorization of tables (as does positional notation) and could produce practical results quickly.

The oldest extant positional notation system is either that of Chinese rod numerals, used from at least the early 8th century, or perhaps Khmer numerals, showing possible usages of positional-numbers in the 7th century. Khmer numerals and other Indian numerals originate with the Brahmi numerals of about the 3rd century BC, which symbols were, at the time, not used positionally. Medieval Indian numerals are positional, as are the derived Arabic numerals, recorded from the 10th century.

After the French Revolution (1789–1799), the new French government promoted the extension of the decimal system. [5] Some of those pro-decimal efforts—such as decimal time and the decimal calendar—were unsuccessful. Other French pro-decimal efforts—currency decimalisation and the metrication of weights and measures—spread widely out of France to almost the whole world.

History of positional fractions

Decimal fractions were first developed and used by the Chinese in the form of rod calculus in the 1st century BC, and then spread to the rest world. [6] [7] J. Lennart Berggren notes that positional decimal fractions were first used in the Arab by mathematician Abu'l-Hasan al-Uqlidisi as early as the 10th century. [8] The Jewish mathematician Immanuel Bonfils used decimal fractions around 1350, but did not develop any notation to represent them. [9] The Persian mathematician Jamshīd al-Kāshī made the same discovery of decimal fractions in the 15th century. [8] Al Khwarizmi introduced fractions to Islamic countries in the early 9th century; his fraction presentation was similar to the traditional Chinese mathematical fractions from Sunzi Suanjing. [10] This form of fraction with numerator on top and denominator at bottom without a horizontal bar was also used by 10th century Abu'l-Hasan al-Uqlidisi and 15th century Jamshīd al-Kāshī's work "Arithmetic Key". [10] [11]

Stevin-decimal notation.svg

The adoption of the decimal representation of numbers less than one, a fraction, is often credited to Simon Stevin through his textbook De Thiende; [12] but both Stevin and E. J. Dijksterhuis indicate that Regiomontanus contributed to the European adoption of general decimals: [13]

European mathematicians, when taking over from the Hindus, via the Arabs, the idea of positional value for integers, neglected to extend this idea to fractions. For some centuries they confined themselves to using common and sexagesimal fractions ... This half-heartedness has never been completely overcome, and sexagesimal fractions still form the basis of our trigonometry, astronomy and measurement of time. ¶ ... Mathematicians sought to avoid fractions by taking the radius R equal to a number of units of length of the form 10n and then assuming for n so great an integral value that all occurring quantities could be expressed with sufficient accuracy by integers. ¶ The first to apply this method was the German astronomer Regiomontanus. To the extent that he expressed goniometrical line-segments in a unit R/10n, Regiomontanus may be called an anticipator of the doctrine of decimal positional fractions. [13] :17,18

In the estimation of Dijksterhuis, "after the publication of De Thiende only a small advance was required to establish the complete system of decimal positional fractions, and this step was taken promptly by a number of writers ... next to Stevin the most important figure in this development was Regiomontanus." Dijksterhuis noted that [Stevin] "gives full credit to Regiomontanus for his prior contribution, saying that the trigonometric tables of the German astronomer actually contain the whole theory of 'numbers of the tenth progress'." [13] :19

Mathematics

Base of the numeral system

In mathematical numeral systems the radix r is usually the number of unique digits, including zero, that a positional numeral system uses to represent numbers. In some cases, such as with a negative base, the radix is the absolute value of the base b. For example, for the decimal system the radix (and base) is ten, because it uses the ten digits from 0 through 9. When a number "hits" 9, the next number will not be another different symbol, but a "1" followed by a "0". In binary, the radix is two, since after it hits "1", instead of "2" or another written symbol, it jumps straight to "10", followed by "11" and "100".

The highest symbol of a positional numeral system usually has the value one less than the value of the radix of that numeral system. The standard positional numeral systems differ from one another only in the base they use.

The radix is an integer that is greater than 1, since a radix of zero would not have any digits, and a radix of 1 would only have the zero digit. Negative bases are rarely used. In a system with more than unique digits, numbers may have many different possible representations.

It is important that the radix is finite, from which follows that the number of digits is quite low. Otherwise, the length of a numeral would not necessarily be logarithmic in its size.

(In certain non-standard positional numeral systems, including bijective numeration, the definition of the base or the allowed digits deviates from the above.)

In standard base-ten (decimal) positional notation, there are ten decimal digits and the number

.

In standard base-sixteen (hexadecimal), there are the sixteen hexadecimal digits (0–9 and A–F) and the number

where B represents the number eleven as a single symbol.

In general, in base-b, there are b digits and the number

has Note that represents a sequence of digits, not multiplication.

Notation

When describing base in mathematical notation, the letter b is generally used as a symbol for this concept, so, for a binary system, b equals 2. Another common way of expressing the base is writing it as a decimal subscript after the number that is being represented (this notation is used in this article). 11110112 implies that the number 1111011 is a base-2 number, equal to 12310 (a decimal notation representation), 1738 (octal) and 7B16 (hexadecimal). In books and articles, when using initially the written abbreviations of number bases, the base is not subsequently printed: it is assumed that binary 1111011 is the same as 11110112.

The base b may also be indicated by the phrase "base-b". So binary numbers are "base-2"; octal numbers are "base-8"; decimal numbers are "base-10"; and so on.

To a given radix b the set of digits {0, 1, ..., b−2, b−1} is called the standard set of digits. Thus, binary numbers have digits {0, 1}; decimal numbers have digits {0, 1, 2, ..., 8, 9}; and so on. Therefore, the following are notational errors: 522, 22, 1A9. (In all cases, one or more digits is not in the set of allowed digits for the given base.)

Exponentiation

Positional numeral systems work using exponentiation of the base. A digit's value is the digit multiplied by the value of its place. Place values are the number of the base raised to the nth power, where n is the number of other digits between a given digit and the radix point. If a given digit is on the left hand side of the radix point (i.e. its value is an integer) then n is positive or zero; if the digit is on the right hand side of the radix point (i.e., its value is fractional) then n is negative.

As an example of usage, the number 465 in its respective base b (which must be at least base 7 because the highest digit in it is 6) is equal to:

If the number 465 was in base-10, then it would equal:

(46510 = 46510)

If however, the number were in base 7, then it would equal:

(4657 = 24310)

10b = b for any base b, since 10b = 1×b1 + 0×b0. For example, 102 = 2; 103 = 3; 1016 = 1610. Note that the last "16" is indicated to be in base 10. The base makes no difference for one-digit numerals.

This concept can be demonstrated using a diagram. One object represents one unit. When the number of objects is equal to or greater than the base b, then a group of objects is created with b objects. When the number of these groups exceeds b, then a group of these groups of objects is created with b groups of b objects; and so on. Thus the same number in different bases will have different values:

241 in base 5:    2 groups of 52 (25)           4 groups of 5          1 group of 1    ooooo    ooooo    ooooo    ooooo                ooooo   ooooo    ooooo    ooooo         +                         +         o    ooooo    ooooo                ooooo   ooooo    ooooo    ooooo
241 in base 8:    2 groups of 82 (64)          4 groups of 8          1 group of 1  oooooooo  oooooooo  oooooooo  oooooooo  oooooooo  oooooooo         oooooooo   oooooooo  oooooooo  oooooooo    +                            +        o  oooooooo  oooooooo  oooooooo  oooooooo         oooooooo   oooooooo  oooooooo  oooooooo  oooooooo  oooooooo

The notation can be further augmented by allowing a leading minus sign. This allows the representation of negative numbers. For a given base, every representation corresponds to exactly one real number and every real number has at least one representation. The representations of rational numbers are those representations that are finite, use the bar notation, or end with an infinitely repeating cycle of digits.

Digits and numerals

A digit is a symbol that is used for positional notation, and a numeral consists of one or more digits used for representing a number with positional notation. Today's most common digits are the decimal digits "0", "1", "2", "3", "4", "5", "6", "7", "8", and "9". The distinction between a digit and a numeral is most pronounced in the context of a number base.

A non-zero numeral with more than one digit position will mean a different number in a different number base, but in general, the digits will mean the same. [14] For example, the base-8 numeral 238 contains two digits, "2" and "3", and with a base number (subscripted) "8". When converted to base-10, the 238 is equivalent to 1910, i.e. 238 = 1910. In our notation here, the subscript "8" of the numeral 238 is part of the numeral, but this may not always be the case.

Imagine the numeral "23" as having an ambiguous base number. Then "23" could likely be any base, from base-4 up. In base-4, the "23" means 1110, i.e. 234 = 1110. In base-60, the "23" means the number 12310, i.e. 2360 = 12310. The numeral "23" then, in this case, corresponds to the set of base-10 numbers {11, 13, 15, 17, 19, 21, 23, ..., 121, 123} while its digits "2" and "3" always retain their original meaning: the "2" means "two of", and the "3" means "three of".

In certain applications when a numeral with a fixed number of positions needs to represent a greater number, a higher number-base with more digits per position can be used. A three-digit, decimal numeral can represent only up to 999. But if the number-base is increased to 11, say, by adding the digit "A", then the same three positions, maximized to "AAA", can represent a number as great as 1330. We could increase the number base again and assign "B" to 11, and so on (but there is also a possible encryption between number and digit in the number-digit-numeral hierarchy). A three-digit numeral "ZZZ" in base-60 could mean 215999. If we use the entire collection of our alphanumerics we could ultimately serve a base-62 numeral system, but we remove two digits, uppercase "I" and uppercase "O", to reduce confusion with digits "1" and "0". [15] We are left with a base-60, or sexagesimal numeral system utilizing 60 of the 62 standard alphanumerics. (But see Sexagesimal system below.) In general, the number of possible values that can be represented by a digit number in base is .

The common numeral systems in computer science are binary (radix 2), octal (radix 8), and hexadecimal (radix 16). In binary only digits "0" and "1" are in the numerals. In the octal numerals, are the eight digits 0–7. Hex is 0–9 A–F, where the ten numerics retain their usual meaning, and the alphabetics correspond to values 10–15, for a total of sixteen digits. The numeral "10" is binary numeral "2", octal numeral "8", or hexadecimal numeral "16".

Radix point

The notation can be extended into the negative exponents of the base b. Thereby the so-called radix point, mostly ».«, is used as separator of the positions with non-negative from those with negative exponent.

Numbers that are not integers use places beyond the radix point. For every position behind this point (and thus after the units digit), the exponent n of the power bn decreases by 1 and the power approaches 0. For example, the number 2.35 is equal to:

Sign

If the base and all the digits in the set of digits are non-negative, negative numbers cannot be expressed. To overcome this, a minus sign, here »−«, is added to the numeral system. In the usual notation it is prepended to the string of digits representing the otherwise non-negative number.

Base conversion

The conversion to a base of an integer n represented in base can be done by a succession of Euclidean divisions by the right-most digit in base is the remainder of the division of n by the second right-most digit is the remainder of the division of the quotient by and so on. The left-most digit is the last quotient. In general, the kth digit from the right is the remainder of the division by of the (k−1)th quotient.

For example: converting A10BHex to decimal (41227):

0xA10B/10 = 0x101A R: 7 (ones place) 0x101A/10 = 0x19C  R: 2 (tens place)  0x19C/10 = 0x29   R: 2 (hundreds place)   0x29/10 = 0x4    R: 1  ...                       4

When converting to a larger base (such as from binary to decimal), the remainder represents as a single digit, using digits from . For example: converting 0b11111001 (binary) to 249 (decimal):

0b11111001/10 = 0b11000 R: 0b1001 (0b1001 = "9" for ones place)    0b11000/10 = 0b10    R: 0b100  (0b100 =  "4" for tens)       0b10/10 = 0b0     R: 0b10   (0b10 =   "2" for hundreds)

For the fractional part, conversion can be done by taking digits after the radix point (the numerator), and dividing it by the implied denominator in the target radix. Approximation may be needed due to a possibility of non-terminating digits if the reduced fraction's denominator has a prime factor other than any of the base's prime factor(s) to convert to. For example, 0.1 in decimal (1/10) is 0b1/0b1010 in binary, by dividing this in that radix, the result is 0b0.00011 (because one of the prime factors of 10 is 5). For more general fractions and bases see the algorithm for positive bases.

Alternatively, Horner's method can be used for base conversion using repeated multiplications, with the same computational complexity as repeated divisions. [16] A number in positional notation can be thought of as a polynomial, where each digit is a coefficient. Coefficients can be larger than one digit, so an efficient way to convert bases is to convert each digit, then evaluate the polynomial via Horner's method within the target base. Converting each digit is a simple lookup table, removing the need for expensive division or modulus operations; and multiplication by x becomes right-shifting. However, other polynomial evaluation algorithms would work as well, like repeated squaring for single or sparse digits. Example:

Convert 0xA10B to 41227  A10B = (10*16^3) + (1*16^2) + (0*16^1) + (11*16^0)   Lookup table:   0x0 = 0   0x1 = 1   ...   0x9 = 9   0xA = 10   0xB = 11   0xC = 12   0xD = 13   0xE = 14   0xF = 15  Therefore 0xA10B's decimal digits are 10, 1, 0, and 11.    Lay out the digits out like this. The most significant digit (10) is "dropped":   10 1   0    11 <- Digits of 0xA10B    ---------------   10  Then we multiply the bottom number from the source base (16), the product is placed under the next digit of the source value, and then add:   10 1   0    11      160   ---------------   10 161   Repeat until the final addition is performed:   10 1   0    11      160 2576 41216   ---------------   10 161 2576 41227     and that is 41227 in decimal.
Convert 0b11111001 to 249  Lookup table:   0b0 = 0   0b1 = 1  Result:  1  1  1  1  1  0  0   1 <- Digits of 0b11111001     2  6  14 30 62 124 248  -------------------------  1  3  7  15 31 62 124 249

Terminating fractions

The numbers which have a finite representation form the semiring

More explicitly, if is a factorization of into the primes with exponents , [17] then with the non-empty set of denominators we have

where is the group generated by the and is the so-called localization of with respect to .

The denominator of an element of contains if reduced to lowest terms only prime factors out of . This ring of all terminating fractions to base is dense in the field of rational numbers . Its completion for the usual (Archimedean) metric is the same as for , namely the real numbers . So, if then has not to be confused with , the discrete valuation ring for the prime , which is equal to with .

If divides , we have

Infinite representations

Rational numbers

The representation of non-integers can be extended to allow an infinite string of digits beyond the point. For example, 1.12112111211112 ... base-3 represents the sum of the infinite series:

Since a complete infinite string of digits cannot be explicitly written, the trailing ellipsis (...) designates the omitted digits, which may or may not follow a pattern of some kind. One common pattern is when a finite sequence of digits repeats infinitely. This is designated by drawing a vinculum across the repeating block: [18]

This is the repeating decimal notation (to which there does not exist a single universally accepted notation or phrasing). For base 10 it is called a repeating decimal or recurring decimal.

An irrational number has an infinite non-repeating representation in all integer bases. Whether a rational number has a finite representation or requires an infinite repeating representation depends on the base. For example, one third can be represented by:

or, with the base implied:
(see also 0.999...)

For integers p and q with gcd (p, q) = 1, the fraction p/q has a finite representation in base b if and only if each prime factor of q is also a prime factor of b.

For a given base, any number that can be represented by a finite number of digits (without using the bar notation) will have multiple representations, including one or two infinite representations:

  1. A finite or infinite number of zeroes can be appended:
  2. The last non-zero digit can be reduced by one and an infinite string of digits, each corresponding to one less than the base, are appended (or replace any following zero digits):
    (see also 0.999...)

Irrational numbers

A (real) irrational number has an infinite non-repeating representation in all integer bases. [19]

Examples are the non-solvable nth roots

with and yQ, numbers which are called algebraic, or numbers like

which are transcendental. The number of transcendentals is uncountable and the sole way to write them down with a finite number of symbols is to give them a symbol or a finite sequence of symbols.

Applications

Decimal system

In the decimal (base-10) Hindu–Arabic numeral system, each position starting from the right is a higher power of 10. The first position represents 100 (1), the second position 101 (10), the third position 102 (10 × 10 or 100), the fourth position 103 (10 × 10 × 10 or 1000), and so on.

Fractional values are indicated by a separator, which can vary in different locations. Usually this separator is a period or full stop, or a comma. Digits to the right of it are multiplied by 10 raised to a negative power or exponent. The first position to the right of the separator indicates 10−1 (0.1), the second position 10−2 (0.01), and so on for each successive position.

As an example, the number 2674 in a base-10 numeral system is:

(2 × 103) + (6 × 102) + (7 × 101) + (4 × 100)

or

(2 × 1000) + (6 × 100) + (7 × 10) + (4 × 1).

Sexagesimal system

The sexagesimal or base-60 system was used for the integral and fractional portions of Babylonian numerals and other Mesopotamian systems, by Hellenistic astronomers using Greek numerals for the fractional portion only, and is still used for modern time and angles, but only for minutes and seconds. However, not all of these uses were positional.

Modern time separates each position by a colon or a prime symbol. For example, the time might be 10:25:59 (10 hours 25 minutes 59 seconds). Angles use similar notation. For example, an angle might be 10°25′59″ (10 degrees 25 minutes 59 seconds). In both cases, only minutes and seconds use sexagesimal notation—angular degrees can be larger than 59 (one rotation around a circle is 360°, two rotations are 720°, etc.), and both time and angles use decimal fractions of a second.[ citation needed ] This contrasts with the numbers used by Hellenistic and Renaissance astronomers, who used thirds, fourths, etc. for finer increments. Where we might write 10°25′59.392″, they would have written 10°25′59′′23′′′31′′′′12′′′′′ or 10°25i59ii23iii31iv12v.

Using a digit set of digits with upper and lowercase letters allows short notation for sexagesimal numbers, e.g. 10:25:59 becomes 'ARz' (by omitting I and O, but not i and o), which is useful for use in URLs, etc., but it is not very intelligible to humans.

In the 1930s, Otto Neugebauer introduced a modern notational system for Babylonian and Hellenistic numbers that substitutes modern decimal notation from 0 to 59 in each position, while using a semicolon (;) to separate the integral and fractional portions of the number and using a comma (,) to separate the positions within each portion. [20] For example, the mean synodic month used by both Babylonian and Hellenistic astronomers and still used in the Hebrew calendar is 29;31,50,8,20 days, and the angle used in the example above would be written 10;25,59,23,31,12 degrees.

Computing

In computing, the binary (base-2), octal (base-8) and hexadecimal (base-16) bases are most commonly used. Computers, at the most basic level, deal only with sequences of conventional zeroes and ones, thus it is easier in this sense to deal with powers of two. The hexadecimal system is used as "shorthand" for binary—every 4 binary digits (bits) relate to one and only one hexadecimal digit. In hexadecimal, the six digits after 9 are denoted by A, B, C, D, E, and F (and sometimes a, b, c, d, e, and f).

The octal numbering system is also used as another way to represent binary numbers. In this case the base is 8 and therefore only digits 0, 1, 2, 3, 4, 5, 6, and 7 are used. When converting from binary to octal every 3 bits relate to one and only one octal digit.

Hexadecimal, decimal, octal, and a wide variety of other bases have been used for binary-to-text encoding, implementations of arbitrary-precision arithmetic, and other applications.

For a list of bases and their applications, see list of numeral systems.

Other bases in human language

Base-12 systems (duodecimal or dozenal) have been popular because multiplication and division are easier than in base-10, with addition and subtraction being just as easy. Twelve is a useful base because it has many factors. It is the smallest common multiple of one, two, three, four and six. There is still a special word for "dozen" in English, and by analogy with the word for 102, hundred, commerce developed a word for 122, gross. The standard 12-hour clock and common use of 12 in English units emphasize the utility of the base. In addition, prior to its conversion to decimal, the old British currency Pound Sterling (GBP) partially used base-12; there were 12 pence (d) in a shilling (s), 20 shillings in a pound (£), and therefore 240 pence in a pound. Hence the term LSD or, more properly, £sd.

The Maya civilization and other civilizations of pre-Columbian Mesoamerica used base-20 (vigesimal), as did several North American tribes (two being in southern California). Evidence of base-20 counting systems is also found in the languages of central and western Africa.

Remnants of a Gaulish base-20 system also exist in French, as seen today in the names of the numbers from 60 through 99. For example, sixty-five is soixante-cinq (literally, "sixty [and] five"), while seventy-five is soixante-quinze (literally, "sixty [and] fifteen"). Furthermore, for any number between 80 and 99, the "tens-column" number is expressed as a multiple of twenty. For example, eighty-two is quatre-vingt-deux (literally, four twenty[s] [and] two), while ninety-two is quatre-vingt-douze (literally, four twenty[s] [and] twelve). In Old French, forty was expressed as two twenties and sixty was three twenties, so that fifty-three was expressed as two twenties [and] thirteen, and so on.

In English the same base-20 counting appears in the use of "scores". Although mostly historical, it is occasionally used colloquially. Verse 10 of Psalm 90 in the King James Version of the Bible starts: "The days of our years are threescore years and ten; and if by reason of strength they be fourscore years, yet is their strength labour and sorrow". The Gettysburg Address starts: "Four score and seven years ago".

The Irish language also used base-20 in the past, twenty being fichid, forty dhá fhichid, sixty trí fhichid and eighty ceithre fhichid. A remnant of this system may be seen in the modern word for 40, daoichead.

The Welsh language continues to use a base-20 counting system, particularly for the age of people, dates and in common phrases. 15 is also important, with 16–19 being "one on 15", "two on 15" etc. 18 is normally "two nines". A decimal system is commonly used.

The Inuit languages use a base-20 counting system. Students from Kaktovik, Alaska invented a base-20 numeral system in 1994 [21]

Danish numerals display a similar base-20 structure.

The Māori language of New Zealand also has evidence of an underlying base-20 system as seen in the terms Te Hokowhitu a Tu referring to a war party (literally "the seven 20s of Tu") and Tama-hokotahi, referring to a great warrior ("the one man equal to 20").

The binary system was used in the Egyptian Old Kingdom, 3000 BC to 2050 BC. It was cursive by rounding off rational numbers smaller than 1 to 1/2 + 1/4 + 1/8 + 1/16 + 1/32 + 1/64, with a 1/64 term thrown away (the system was called the Eye of Horus).

A number of Australian Aboriginal languages employ binary or binary-like counting systems. For example, in Kala Lagaw Ya, the numbers one through six are urapon, ukasar, ukasar-urapon, ukasar-ukasar, ukasar-ukasar-urapon, ukasar-ukasar-ukasar.

North and Central American natives used base-4 (quaternary) to represent the four cardinal directions. Mesoamericans tended to add a second base-5 system to create a modified base-20 system.

A base-5 system (quinary) has been used in many cultures for counting. Plainly it is based on the number of digits on a human hand. It may also be regarded as a sub-base of other bases, such as base-10, base-20, and base-60.

A base-8 system (octal) was devised by the Yuki tribe of Northern California, who used the spaces between the fingers to count, corresponding to the digits one through eight. [22] There is also linguistic evidence which suggests that the Bronze Age Proto-Indo Europeans (from whom most European and Indic languages descend) might have replaced a base-8 system (or a system which could only count up to 8) with a base-10 system. The evidence is that the word for 9, newm, is suggested by some to derive from the word for "new", newo-, suggesting that the number 9 had been recently invented and called the "new number". [23]

Many ancient counting systems use five as a primary base, almost surely coming from the number of fingers on a person's hand. Often these systems are supplemented with a secondary base, sometimes ten, sometimes twenty. In some African languages the word for five is the same as "hand" or "fist" (Dyola language of Guinea-Bissau, Banda language of Central Africa). Counting continues by adding 1, 2, 3, or 4 to combinations of 5, until the secondary base is reached. In the case of twenty, this word often means "man complete". This system is referred to as quinquavigesimal. It is found in many languages of the Sudan region.

The Telefol language, spoken in Papua New Guinea, is notable for possessing a base-27 numeral system.

Non-standard positional numeral systems

Interesting properties exist when the base is not fixed or positive and when the digit symbol sets denote negative values. There are many more variations. These systems are of practical and theoretic value to computer scientists.

Balanced ternary [24] uses a base of 3 but the digit set is {1,0,1} instead of {0,1,2}. The "1" has an equivalent value of −1. The negation of a number is easily formed by switching the    on the 1s. This system can be used to solve the balance problem, which requires finding a minimal set of known counter-weights to determine an unknown weight. Weights of 1, 3, 9, ..., 3n known units can be used to determine any unknown weight up to 1 + 3 + ... + 3n units. A weight can be used on either side of the balance or not at all. Weights used on the balance pan with the unknown weight are designated with 1, with 1 if used on the empty pan, and with 0 if not used. If an unknown weight W is balanced with 3 (31) on its pan and 1 and 27 (30 and 33) on the other, then its weight in decimal is 25 or 1011 in balanced base-3.

10113 = 1 × 33 + 0 × 32 − 1 × 31 + 1 × 30 = 25.

The factorial number system uses a varying radix, giving factorials as place values; they are related to Chinese remainder theorem and residue number system enumerations. This system effectively enumerates permutations. A derivative of this uses the Towers of Hanoi puzzle configuration as a counting system. The configuration of the towers can be put into 1-to-1 correspondence with the decimal count of the step at which the configuration occurs and vice versa.

Decimal equivalents−3−2−1012345678
Balanced base 31011101111011111110111101
Base −21101101101110111100101110101101111000
Factoroid010100110200210100010101100

Non-positional positions

Each position does not need to be positional itself. Babylonian sexagesimal numerals were positional, but in each position were groups of two kinds of wedges representing ones and tens (a narrow vertical wedge | for the one and an open left pointing wedge ⟨ for the ten) — up to 5+9=14 symbols per position (i.e. 5 tens ⟨⟨⟨⟨⟨ and 9 ones ||||||||| grouped into one or two near squares containing up to three tiers of symbols, or a place holder (\\) for the lack of a position). [25] Hellenistic astronomers used one or two alphabetic Greek numerals for each position (one chosen from 5 letters representing 10–50 and/or one chosen from 9 letters representing 1–9, or a zero symbol). [26]

See also

Examples:

Related topics:

Other:

Notes

  1. Kaplan, Robert (2000). The Nothing That Is: A Natural History of Zero . Oxford: Oxford University Press. pp. 11–12 via archive.org.
  2. "Greek numerals". Archived from the original on 26 November 2016. Retrieved 31 May 2016.
  3. Menninger, Karl: Zahlwort und Ziffer. Eine Kulturgeschichte der Zahl, Vandenhoeck und Ruprecht, 3rd. ed., 1979, ISBN   3-525-40725-4, pp. 150–153
  4. Ifrah, page 187
  5. L. F. Menabrea. Translated by Ada Augusta, Countess of Lovelace. "Sketch of The Analytical Engine Invented by Charles Babbage" Archived 15 September 2008 at the Wayback Machine . 1842.
  6. Lam Lay Yong, "The Development of Hindu-Arabic and Traditional Chinese Arithmetic", Chinese Science, 1996 p38, Kurt Vogel notation
  7. Joseph Needham (1959). "Decimal System". Science and Civilisation in China, Volume III, Mathematics and the Sciences of the Heavens and the Earth . Cambridge University Press.
  8. 1 2 Berggren, J. Lennart (2007). "Mathematics in Medieval Islam". The Mathematics of Egypt, Mesopotamia, China, India, and Islam: A Sourcebook. Princeton University Press. p. 518. ISBN   978-0-691-11485-9.
  9. Gandz, S.: The invention of the decimal fractions and the application of the exponential calculus by Immanuel Bonfils of Tarascon (c. 1350), Isis 25 (1936), 16–45.
  10. 1 2 Lam Lay Yong, "The Development of Hindu-Arabic and Traditional Chinese Arithmetic", Chinese Science, 1996, p. 38, Kurt Vogel notation
  11. Lay Yong, Lam. "A Chinese Genesis, Rewriting the history of our numeral system". Archive for History of Exact Sciences. 38: 101–108.
  12. B. L. van der Waerden (1985). A History of Algebra. From Khwarizmi to Emmy Noether . Berlin: Springer-Verlag.
  13. 1 2 3 E. J. Dijksterhuis (1970) Simon Stevin: Science in the Netherlands around 1600, Martinus Nijhoff Publishers, Dutch original 1943
  14. The digit will retain its meaning in other number bases, in general, because a higher number base would normally be a notational extension of the lower number base in any systematic organization. In the mathematical sciences there is virtually only one positional-notation numeral system for each base below 10, and this extends with few, if insignificant, variations on the choice of alphabetic digits for those bases above 10.
  15. We do not usually remove the lowercase digits "l" and lowercase "o", for in most fonts they are discernible from the digits "1" and "0".
  16. Collins, G. E.; Mignotte, M.; Winkler, F. (1983). "Arithmetic in basic algebraic domains" (PDF). In Buchberger, Bruno; Collins, George Edwin; Loos, Rüdiger; Albrecht, Rudolf (eds.). Computer Algebra: Symbolic and Algebraic Computation. Computing Supplementa. Vol. 4. Vienna: Springer. pp. 189–220. doi:10.1007/978-3-7091-7551-4_13. ISBN   3-211-81776-X. MR   0728973.
  17. The exact size of the does not matter. They only have to be 1.
  18. Weisstein, Eric W. "Vinculum". mathworld.wolfram.com. Retrieved 22 August 2024.
  19. "Irrational Numbers: Definition, Examples and Properties". flamath.com. 10 April 2024. Retrieved 22 August 2024.
  20. Neugebauer, Otto; Sachs, Abraham Joseph; Götze, Albrecht (1945), Mathematical Cuneiform Texts, American Oriental Series, vol. 29, New Haven: American Oriental Society and the American Schools of Oriental Research, p. 2, ISBN   9780940490291, archived from the original on 1 October 2016, retrieved 18 September 2019
  21. Bartley, Wm. Clark (January–February 1997). "Making the Old Way Count" (PDF). Sharing Our Pathways. 2 (1): 12–13. Archived (PDF) from the original on 25 June 2013. Retrieved 27 February 2017.
  22. Barrow, John D. (1992), Pi in the sky: counting, thinking, and being , Clarendon Press, p. 38, ISBN   9780198539568 .
  23. (Mallory & Adams 1997) Encyclopedia of Indo-European Culture
  24. Knuth, pages 195–213
  25. Ifrah, pages 326, 379
  26. Ifrah, pages 261–264

Related Research Articles

<span class="mw-page-title-main">Decimal</span> Number in base-10 numeral system

The decimal numeral system is the standard system for denoting integer and non-integer numbers. It is the extension to non-integer numbers of the Hindu–Arabic numeral system. The way of denoting numbers in the decimal system is often referred to as decimal notation.

The duodecimal system, also known as base twelve or dozenal, is a positional numeral system using twelve as its base. In duodecimal, the number twelve is denoted "10", meaning 1 twelve and 0 units; in the decimal system, this number is instead written as "12" meaning 1 ten and 2 units, and the string "10" means ten. In duodecimal, "100" means twelve squared, "1000" means twelve cubed, and "0.1" means a twelfth.

Hexadecimal is a positional numeral system that represents numbers using a radix (base) of sixteen. Unlike the decimal system representing numbers using ten symbols, hexadecimal uses sixteen distinct symbols, most often the symbols "0"–"9" to represent values 0 to 9 and "A"–"F" to represent values from ten to fifteen.

<span class="mw-page-title-main">Numeral system</span> Notation for expressing numbers

A numeral system is a writing system for expressing numbers; that is, a mathematical notation for representing numbers of a given set, using digits or other symbols in a consistent manner.

<span class="mw-page-title-main">Number</span> Used to count, measure, and label

A number is a mathematical object used to count, measure, and label. The most basic examples are the natural numbers 1, 2, 3, 4, and so forth. Numbers can be represented in language with number words. More universally, individual numbers can be represented by symbols, called numerals; for example, "5" is a numeral that represents the number five. As only a relatively small number of symbols can be memorized, basic numerals are commonly organized in a numeral system, which is an organized way to represent any number. The most common numeral system is the Hindu–Arabic numeral system, which allows for the representation of any non-negative integer using a combination of ten fundamental numeric symbols, called digits. In addition to their use in counting and measuring, numerals are often used for labels, for ordering, and for codes. In common usage, a numeral is not clearly distinguished from the number that it represents.

Octal is a numeral system with eight as the base.

A senary numeral system has six as its base. It has been adopted independently by a small number of cultures. Like the decimal base 10, the base is a semiprime, though it is unique as the product of the only two consecutive numbers that are both prime. As six is a superior highly composite number, many of the arguments made in favor of the duodecimal system also apply to the senary system.

<span class="mw-page-title-main">Babylonian cuneiform numerals</span> Numeral system

Babylonian cuneiform numerals, also used in Assyria and Chaldea, were written in cuneiform, using a wedge-tipped reed stylus to print a mark on a soft clay tablet which would be exposed in the sun to harden to create a permanent record.

A binary number is a number expressed in the base-2 numeral system or binary numeral system, a method for representing numbers that uses only two symbols for the natural numbers: typically "0" (zero) and "1" (one). A binary number may also refer to a rational number that has a finite representation in the binary numeral system, that is, the quotient of an integer by a power of two.

The quater-imaginary numeral system is a numeral system, first proposed by Donald Knuth in 1960. Unlike standard numeral systems, which use an integer as their bases, it uses the imaginary number as its base. It is able to uniquely represent every complex number using only the digits 0, 1, 2, and 3. Numbers less than zero, which are ordinarily represented with a minus sign, are representable as digit strings in quater-imaginary; for example, the number −1 is represented as "103" in quater-imaginary notation.

A numerical digit or numeral is a single symbol used alone, or in combinations, to represent numbers in positional notation, such as the common base 10. The name "digit" originates from the Latin digiti meaning fingers.

Balanced ternary is a ternary numeral system that uses a balanced signed-digit representation of the integers in which the digits have the values −1, 0, and 1. This stands in contrast to the standard (unbalanced) ternary system, in which digits have values 0, 1 and 2. The balanced ternary system can represent all integers without using a separate minus sign; the value of the leading non-zero digit of a number has the sign of the number itself. The balanced ternary system is an example of a non-standard positional numeral system. It was used in some early computers and has also been used to solve balance puzzles.

In a positional numeral system, the radix or base is the number of unique digits, including the digit zero, used to represent numbers. For example, for the decimal system the radix is ten, because it uses the ten digits from 0 through 9.

In mathematical notation for numbers, a signed-digit representation is a positional numeral system with a set of signed digits used to encode the integers.

Many letters of the Latin alphabet, both capital and small, are used in mathematics, science, and engineering to denote by convention specific or abstracted constants, variables of a certain type, units, multipliers, or physical entities. Certain letters, when combined with special formatting, take on special meaning.

Bijective numeration is any numeral system in which every non-negative integer can be represented in exactly one way using a finite string of digits. The name refers to the bijection that exists in this case between the set of non-negative integers and the set of finite strings using a finite set of symbols.

Non-standard positional numeral systems here designates numeral systems that may loosely be described as positional systems, but that do not entirely comply with the following description of standard positional systems:

A negative base may be used to construct a non-standard positional numeral system. Like other place-value systems, each position holds multiples of the appropriate power of the system's base; but that base is negative—that is to say, the base b is equal to −r for some natural number r.

In arithmetic, a complex-base system is a positional numeral system whose radix is an imaginary or complex number.

References