Rabboni (steam tug)

Last updated
History
Name:Rabboni
Builder: George Middlemas [1]
Launched: April 9, 1865, at San Francisco. [2]
General characteristics
Type: steam tug
Tonnage: 48.67 regist. [3]
Length: 100  ft (30.48  m) [2]
Beam: 23  ft (7.01  m) [3]
Depth: 9  ft (2.74  m) depth of hold
Installed power: single cylinder high pressure steam engine; cylinder bore 24  in (61.0  cm) ; stroke 28  in (71.1  cm); reengined in 1900 to compound steeple type engine. [2]
Propulsion: propeller (8.5  ft (2.59  m) diameter. [2]

Rabboni was a steam tug that operated on the west coast of the United States starting in 1865.

Contents

Career

Rabboni was built in San Francisco, California, and launched on April 9, 1865. The tug was brought north to the mouth of the Columbia river, arriving in July 1865, and reaching Portland, Oregon on July 29, 1865. The vessel was commanded by Capt. Paul Corno, who was also its main owner. En route Rabboni had stopped at Coos Bay and procured a three-month supply of coal, and picked up 18,000 board feet of lumber.

On August 10, 1865, Rabboni towed in the bark Almatia, which became the first vessel towed across the Columbia bar by a regular tug. [3] Rabboni was considered a good tug for the time, but ran into opposition at the Columbia from the bar pilots and prejudice among sailing ship owners against steam craft of any kind. In March, 1866 Rabboni proving unable to win sufficient business, was returned to San Francisco. [3]

After many years out of the area, Rabboni was returned to the Pacific Northwest, this time to the Strait of Juan de Fuca, in an effort to pick up tow work from inbound ships headed for ports in Puget Sound. This placed Rabboni in opposition to the powerful Puget Sound Tug Company, and again Rabboni proved unable to compete. [2] There was thereafter no steam tug on the Columbia river bar until 1869. [3]

In 1890, Rabboni came under the ownership of F.B. Cornwall. By 1898 Rabboni had been laid up for some time at the Stetson and Post lumber mill in Seattle. The Klondike gold rush created a great demand for shipping, which resulted, as one historian as written, in “large number of old vessels pulled off the mudflats and out of backwater sloughs from Oakland Creek to British Columbia." [4] Rabboni was one of these vessels, and was refitted for tow work in Alaska, but proved to be unsuccessful. [2]

Reconstruction

In 1900, Rabboni, still owned by F.B. Cornwall, was rebuilt, and a new compound steeple-type steam engine was installed. Rabboni was last used in service for the Bellingham Bay Improvement Company, whose lumber mills were controlled by Cornwall. [2]

Notes

  1. Overland Monthly, at 293.
  2. 1 2 3 4 5 6 7 Newell, ed. H.W. McCurdy Marine History, at 31 and 58.
  3. 1 2 3 4 5 Wright, ed. Lewis and Dryden Marine History, at 138, 147, 397.
  4. Newell, H.W. McCurdy Marine History, at 31.

Related Research Articles

Coos Bay Mosquito Fleet

The Coos Bay Mosquito Fleet comprised numerous small steamboats and motor vessels which operated in the late 19th and early 20th centuries on Coos Bay, a large and mostly shallow harbor on the southwest coast of the U.S. state of Oregon, to the north of the Coquille River valley. Coos Bay is the major harbor on the west coast of the United States between San Francisco and the mouth of the Columbia River.

<i>Idaho</i> (sidewheeler) sidewheeler steamboat

The sidewheeler Idaho was a steamboat that ran on the Columbia River and Puget Sound from 1860 to 1898. There is some confusion as to the origins of the name; many historians have proposed it is the inspiration for the name of the State of Idaho. Considerable doubt has been cast on this due to the fact that it is unclear if the boat was named before or after the idea of 'Idaho' as a territory name was proposed. John Ruckel also allegedly stated he had named the boat after a Native American term meaning 'Gem of the Mountains' he got from a mining friend from what is now Colorado territory. This steamer should not be confused with the many other vessels of the same name, including the sternwheeler Idaho built in 1903 for service on Lake Coeur d'Alene and the steamship Idaho of the Pacific Coast Steamship Line which sank near Port Townsend, Washington.

<i>Ramona</i> (sternwheeler 1892) 1892 sternwheeler

The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.

<i>Carrier Dove</i> (schooner)

The Carrier Dove was a 4-masted schooner built by the Hall Brothers in Port Blakely in 1890. She worked in the West coast lumber trade and in fishing.

<i>Henry Bailey</i> (sternwheeler) Sternwheel steamboat

Henry Bailey was a sternwheel steamboat that operated on Puget Sound from 1888 to 1910. The vessel was named after Henry Bailey, a steamboat captain in the 1870s who lived in Ballard, Washington.

Elk was a steam tug that operated on Puget Sound, and earlier, from 1880 to 1896, on Lake Washington under the name of Katherine.

<i>Alice</i> (steam tug 1897) Puget Sound steam passenger ship built in 1897; later a diesel tugboat

Alice was a Puget Sound steam passenger ship built in 1897. Alice was later rebuilt into a steam tug, and later converted to diesel power and renamed Simon Foss. As a tug, the vessel was in service until 1963. This vessel should not be confused with the similarly designed vessel Alice, built in 1892, which later became Foss 18.

<i>Lady of the Lake</i> (steamboat, 1897)

Lady of the Lake was a wooden steamboat that operated on Puget Sound from 1897 to 1903. Following a fire in 1903, the vessel was rebuilt as the tug Ruth.

Portland was a steam tug built in Portland, Oregon, United States. This vessel was also known as Clayoquat and Phoenix.

<i>Richard Holyoke</i> (steam tug)

Richard Holyoke was a seagoing steam tug boat built in 1877 in Seattle, Washington and which was in service on Puget Sound and other areas of the northwest Pacific coast until 1935. The vessel was considered to be one of the most powerful tugs of its time.

<i>Quickstep</i> (steamboat)

Quickstep was a steamboat that operated from 1877 to 1897 in coastal, inland waters and rivers of the Pacific Northwest. This vessel should not be confused with a number of other vessels with the same name, some of which operated in the same area about the same time.

<i>Otter</i> (sternwheeler)

Otter was a wooden sternwheel steamboat that was used in Puget Sound and briefly on the Columbia and Stikine rivers from 1874 to 1897.

<i>Teaser</i> (sternwheeler)

Teaser was a steamboat which ran on the Columbia River and Puget Sound from 1874 to 1880.

Old Settler was a sternwheel steamboat that operated on Puget Sound from 1878 to 1895.

<i>Alice Gertrude</i>

Alice Gertrude was a wooden steamship which operated on the Strait of Juan de Fuca and Puget Sound from 1898 to January 1907, when she was wrecked at Clallam Bay in Washington.

<i>General Miles</i>

General Miles was a steamship constructed in 1882 which served in various coastal areas of the states of Oregon and Washington, as well as British Columbia and the territory of Alaska. It was apparently named after US General Nelson A. Miles.

<i>Kirkland</i> (sidewheeler) sidewheel steamboat that ran on Lake Washington from 1888 to 1898

Kirkland was a sidewheel steamboat that ran on Lake Washington from 1888 to 1898.

<i>Cutch</i> (steamship) steamship built in 1884

Cutch was a steamship built in 1884 in Hull, England. The ship served as a pilgrimage vessel and a yacht in India from 1884 to 1890, then as a steamship in British Columbia from 1890 to 1900 under the ownership of the Union Steamship Company. The ship was wrecked in August 1900, then salvaged and registered in the United States as Jessie Banning. In 1902 the ship was transferred to the navy of Colombia where it was armed with cannon and served in the Colombian navy as the gunboat Bogota. Bogota shelled the city of Panama on November 3, 1903 during the secession of Panama from Colombia.

<i>No Wonder</i> (sternwheeler) stern-wheel driven steamboat

No Wonder was a stern-wheel driven steamboat that operated on the Willamette, Columbia and Cowlitz rivers from 1889 to 1930. No Wonder was originally built in 1877 as Wonder, which was dismantled in 1888, with components being shifted over to a new hull, which when launched in late 1889 was called No Wonder.

<i>Governor Newell</i> (sternwheeler) steamboat

Governor Newell was a sternwheel-driven steamboat that operated from 1883 to 1902 in the Pacific Northwest.

References