Sakman

Last updated
Plan of a Micronesian "flying proa", from a 1742 sketch by Lt. Peircy Brett, an officer on Lord Anson's round-the-world voyage Anson proa.jpg
Plan of a Micronesian "flying proa", from a 1742 sketch by Lt. Peircy Brett, an officer on Lord Anson's round-the-world voyage

Sakman, better known in western sources as flying proas, are traditional sailing outrigger boats of the Chamorro people of the Northern Marianas. They are characterized by a single outrigger and a crab claw sail. They are the largest native sailing ships ( ladjak ) of the Chamorro people. Followed by the slightly smaller lelek and the medium-sized duding . [1] They are similar to other traditional sailing ships of Micronesia, like the wa , baurua , and the walap . These ships were once used for trade and transportation between islands.

Contents

Description

Sakman was a single-outrigger boat. Its basic design consists of a very narrow dugout canoe which served as the main hull, to which an outrigger was attached on one side. The main hull was typically around 30 to 40 ft (9.1 to 12.2 m) long, but only around 2 ft (0.61 m) wide and 3 ft (0.91 m) deep. It had a single mast known as the palu, and a steering oar known as the umulin. A platform was usually built on the spars connecting the main hull and the outrigger, which was used to carry cargo and passengers. [2]

The hull was typically painted with protective designs in white, black, red, and orange using ochre, lime (afok), and coconut oil and soot. It was rigged with a crab claw sail made from woven mats of pandanus leaves (akgak). The canoes were usually made from dokdok (breadfruit) trees. They were hollowed out and carved by men. The sails (layak) were woven by women. [2]

The main hull was asymmetrical on its left and right sides to counteract the drag of the outrigger float. However, it was symmetrical at both ends, which meant the boat can be sailed in reverse. This was a necessity to accomplish the shunting technique, in which the outrigger was always kept windward. This allowed the boats to sail leeward without having to turn the ship. [2]

History

The sakman were the very first Pacific outrigger boats encountered by Europeans. The Venetian scholar Antonio Pigafetta, who was part of Ferdinand Magellan's 1519–1522 circumnavigation, mistakenly described the outrigger hull as a "small boat fastened astern". Magellan's crew were impressed by the ships' speed, maneuverability, and their ability to reverse directions. They were the first accounts that described the sakman as "flying." [3] Further accounts by the Spanish described the sakman as being capable of sailing from Guam to Manila in only four days, averaging more than 20 mi (32 km) per hour. [2]

During his 1740–1744 circumnavigation, Lord Anson applied the term proa to the sakman. His fleet captured one in 1742, and Lt. Peircy Brett of HMS Centurion made a detailed sketch of it. [4] Rev. Richard Walter, chaplain of HMS Centurion, estimated the speed of the sakman at twenty miles per hour (32 km/h). [1] Although aware of earlier Spanish accounts of the boats of the Spanish East Indies, Anson's account was the first detailed description of a sakman to the English-speaking world. [5] These accounts fascinated both the British and American public, ushering in a period of interest in the design by sports sailors. Working from the drawings and descriptions of explorers, western builders often took liberties with the traditional designs, merging their interpretation of native designs with Western boat building methods. Thus this Western "proa" often diverged radically from the sakman to the point that the only shared feature was the windward/leeward hull arrangement. [5]

The Chamorro population was near-decimated during the Spanish colonial period after the ravages of epidemics of European diseases, as well as wars with the Spanish. The Spanish also forbade the sakman to be sailed in open ocean, leading to the eventual erosion of sailing skills. The techniques of building sakman and other traditional sailing ships were lost some time during the 19th century. [6] [7] However, there have been attempts in modern times to revive the sakman traditions. The first sakman to be built after nearly 200 years was the Saina, which was built between 2007 and 2008. [7]

See also

Related Research Articles

Multihull ship type

A multihull is a ship or boat with more than one hull, whereas a vessel with a single hull is a monohull.

Sail plan Diagram of the masts, spars, rigging, and sails of a sailing vessel

A sail plan is a description of the specific ways that a sailing craft is rigged, as discussed below. Also, the term “sail plan” is a graphic depiction of the arrangement of the sails for a given sailing craft.

Catamaran multi-hulled watercraft

A catamaran is a multi-hulled watercraft featuring two parallel hulls of equal size. It is a geometry-stabilized craft, deriving its stability from its wide beam, rather than from a ballasted keel as with a monohull boat. Catamarans typically have less hull volume, smaller displacement, and shallower draft (draught) than monohulls of comparable length. The two hulls combined also often have a smaller hydrodynamic resistance than comparable monohulls, requiring less propulsive power from either sails or motors. The catamaran's wider stance on the water can reduce both heeling and wave-induced motion, as compared with a monohull, and can give reduced wakes.

Trimaran triple-hulled boat

A trimaran is a multihull boat that comprises a main hull and two smaller outrigger hulls which are attached to the main hull with lateral beams. Most modern trimarans are sailing yachts designed for recreation or racing; others are ferries or warships. They originated from the traditional double-outrigger hulls of the Austronesian cultures of Maritime Southeast Asia; particularly in the Philippines and Eastern Indonesia, where it remains the dominant hull design of traditional fishing boats. Double-outriggers are derived from the older catamaran and single-outrigger boat designs.

Outrigger Projecting structure on a boat

An outrigger is a projecting structure on a boat, with specific meaning depending on types of vessel. Outriggers may also refer to legs on a wheeled vehicle that are folded out when it needs stabilization, for example on a crane that lifts heavy loads.

Outrigger boat Boat with stabilizer(s)

Outrigger boats are various watercraft featuring one or more lateral support floats known as outriggers, which are fastened to one or both sides of the main hull. They can range from small dugout canoes to large plank-built vessels. Outrigger boats can also vary in their configuration, from the ancestral double-hull configuration (catamarans), to single-outrigger vessels prevalent in the Pacific Islands and Madagascar, to the double-outrigger vessels (trimarans) prevalent in Island Southeast Asia. They are traditionally fitted with Austronesian sails, like the crab claw sails and tanja sails, but in modern times are often fitted with petrol engines.

Proa Type of multihull sailboat

Proas are various types of multi-hull outrigger sailboats of the Austronesian peoples. The terms were used for native Austronesian ships in European records during the Colonial era indiscriminately, and thus can confusingly refer to the double-ended single-outrigger boats of Oceania, the double-outrigger boats of Island Southeast Asia, and sometimes ships with no outriggers or sails at all.

Waka (canoe) Māori watercraft, usually canoes

Waka are Māori watercraft, usually canoes ranging in size from small, unornamented canoes used for fishing and river travel to large, decorated war canoes up to 40 metres (130 ft) long.

Tepukei

A tepukei or tepuke is a Polynesian boat type, characterized by its elaborate decking. Tepukei boats are produced primarily by the Polynesian-speaking inhabitants of Taumako, and have been occasionally borrowed by other Polynesian, or even Melanesian, societies.

Canoe sailing refers to the practice of fitting an Austronesian outrigger or Western canoe with sails.

Crab claw sail Triangular sail with spars along upper and lower edges used by traditional Austronesians

The crab claw sail or, as it is sometimes known, Oceanic lateen or Oceanic sprit, is a triangular sail with spars along upper and lower edges. The crab claw sail is used in many traditional Austronesian cultures, as can be seen by the traditional paraw, proa, lakana, and tepukei.

Drua

Drua, also known as Na Drua, N'drua, Ndrua or Waqa Tabu, is a double-hull sailing boat that originated in the south-western Pacific islands. Druas do not tack but rather shunt. Both ends of each hull are identical, but the hulls are of different sizes and the smaller one is always sailed to windward. The main differences, compared to proas, are that the hulls have a symmetric U-form profile, and a second hull is used instead of an outrigger. When a float (cama) is used in place of the smaller hull, the craft is called a camakau.

The Fijian double canoe was the largest and finest sea-going vessel ever designed and built by natives of Oceania before contact with Europeans.

Walap

The Walap is a traditional ocean-going sailing outrigger canoe from the Marshall Islands.

Hilu outrigger

The Hilu outrigger is a personal size, beach launched sports boat in the sailing canoe style. Hilu was AMF's production version of a boat variety more commonly found in designs hand built by outrigger aficionados. Hilu utilizes fiberglass pontoons and carries a single polyester lateen sail mounted to an un-stayed aluminum mast.

Paraw sail boat type (Philippines)

Paraw are various double outrigger sail boats in the Philippines. It is a general term and thus can refer to a range of ship types, from small fishing canoes to large merchant lashed-lug plank boats with two outriggers (katig) propelled by sails

Traditional fishing boat

Traditionally, many different kinds of boats have been used as fishing boats to catch fish in the sea, or on a lake or river. Even today, many traditional fishing boats are still in use. According to the United Nations Food and Agriculture Organization (FAO), at the end of 2004, the world fishing fleet consisted of about 4 million vessels, of which 2.7 million were undecked (open) boats. While nearly all decked vessels were mechanised, only one-third of the undecked fishing boats were powered, usually with outboard engines. The remaining 1.8 million boats were traditional craft of various types, operated by sail and oars.

<i>Wa</i> (watercraft) Type of outrigger canoe from the Caroline Islands

Wa are traditional sailing outrigger canoes of the Caroline Islands. They have a single outrigger. They are similar to the sakman of the Northern Marianas.

Kaep is a traditional type of double-ended Proa sailboat native to Palau. Some of the essential design elements have also been adopted as a modern smaller multihull prototype variant.

Bangka (boat)

Bangka are various native watercraft of the Philippines. It originally referred to small double-outrigger dugout canoes used in rivers and shallow coastal waters, but since the 18th century, it has expanded to include larger lashed-lug ships, with or without outriggers. Though the term used is the same throughout the Philippines, "bangka" can refer to a very diverse range of boats specific to different regions. Bangka were also spelled as banca, panca, or panga in Spanish.

Polynesian multihull terminology part of the framework for a sailing vessels outrigger

Polynesian multihull terminology, such as "ama", "aka" and "vaka" are multihull terms that have been have been widely adopted beyond the South Pacific where these terms originated. This Polynesian terminology is in common use in the Americas and the Pacific but is almost unknown in Europe, where the anglo-saxon terms "hull" and "outrigger" form normal parlance. Outriggers, catamarans, and outrigger boats are a common heritage of all Austronesian peoples and predate the Micronesian and Polynesian expansion into the Pacific. They are also the dominant forms of traditional ships in Island Southeast Asian and Malagasy Austronesian cultures, where local terms are used.

References

  1. 1 2 Henry Coleman Folkard (1870). The sailing boat: a description of English and foreign boats. Longmans & Co., London. pp.  242–249.
  2. 1 2 3 4 Bevacqua, Michael Lujan. "Agad'na: Canoe Builders". Guampedia. Retrieved 23 June 2019.
  3. Emma Helen Blair; James Alexander Robertson; Edward Gaylord Bourne (1906). The Philippine Islands, 1493–1803: Explorations by Early Navigators. A. H. Clark Co. p.  99.
  4. "History: Drake and Anson" . Retrieved 2007-10-26.
  5. 1 2 Charnock, John (1802). An History of Marine Architecture. London: R. Faulder. pp. 313–316.
  6. Goetzfridt, Nicholas J. "Proa and Navigation". Guampedia. Retrieved 22 June 2019.
  7. 1 2 Roberts, Brian Russell; Stephens, Michelle Ann, eds. (2017). "Shades of Paradise". Archipelagic American Studies. Duke University Press. ISBN   9780822373209.