Square rig

Last updated
Main-mast of a square-rigged brig, with all square sails set except the course Square-rigged mainmast.jpg
Main-mast of a square-rigged brig, with all square sails set except the course

Square rig is a generic type of sail and rigging arrangement in which the primary driving sails are carried on horizontal spars which are perpendicular, or square, to the keel of the vessel and to the masts. These spars are called yards and their tips, outside the lifts, are called the yardarms. [1] A ship mainly rigged so is called a square-rigger. [2]

Contents

In 'Jackspeak' (Royal Navy slang) it also refers to the dress uniform of Junior Ratings.

History

The single-masted, square-rigged Humber keel performed well to windward. Humber Keel Ada Dews painted by Reuben Chappell.jpg
The single-masted, square-rigged Humber keel performed well to windward.

Single sail square rigs were used by the ancient Egyptians, the Phoenicians, the Greeks, the Romans, and the Celts. Later the Scandinavians, the Germanic peoples, and the Slavs adopted the single square-rigged sail, with it becoming one of the defining characteristics of the classic “Viking” ships. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Sloop</span> Sail boat with a single mast and a fore-and-aft rig

A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sails fore and aft, or as a gaff-rig with triangular foresail(s) and a gaff rigged mainsail.

<span class="mw-page-title-main">Rigging</span> Ropes, cables and chains which support masts of sailing ships

Rigging comprises the system of ropes, cables and chains, which support and control a sailing ship or sail boat's masts and sails. Standing rigging is the fixed rigging that supports masts including shrouds and stays. Running rigging is rigging which adjusts the position of the vessel's sails and spars including halyards, braces, sheets and vangs.

<span class="mw-page-title-main">Sailing ship</span> Large wind-powered water vessel

A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships carry square sails on each mast—the brig and full-rigged ship, said to be "ship-rigged" when there are three or more masts. Others carry only fore-and-aft sails on each mast, for instance some schooners. Still others employ a combination of square and fore-and-aft sails, including the barque, barquentine, and brigantine.

<span class="mw-page-title-main">Rig (sailing)</span> Arrangement of a ships masts, sails, and ropes

A sailing vessel's rig is its arrangement of masts, sails and rigging. Examples include a schooner rig, cutter rig, junk rig, etc. A rig may be broadly categorized as "fore-and-aft", "square", or a combination of both. Within the fore-and-aft category there is a variety of triangular and quadrilateral sail shapes. Spars or battens may be used to help shape a given kind of sail. Each rig may be described with a sail plan—formally, a drawing of a vessel, viewed from the side.

<span class="mw-page-title-main">Yawl</span> Type of boat

A yawl is a type of boat. The term has several meanings. It can apply to the rig, to the hull type or to the use which the vessel is put.

<span class="mw-page-title-main">Gaff rig</span> Sailing rig configuration

Gaff rig is a sailing rig in which the sail is four-cornered, fore-and-aft rigged, controlled at its peak and, usually, its entire head by a spar (pole) called the gaff. Because of the size and shape of the sail, a gaff rig will have running backstays rather than permanent backstays.

<span class="mw-page-title-main">Lateen</span> Type of sailing rig

A lateen or latin-rig is a triangular sail set on a long yard mounted at an angle on the mast, and running in a fore-and-aft direction. The settee can be considered to be an associated type of the same overall category of sail.

<span class="mw-page-title-main">Mast (sailing)</span> Pole used in rigging of a sailing vessel

The mast of a sailing vessel is a tall spar, or arrangement of spars, erected more or less vertically on the centre-line of a ship or boat. Its purposes include carrying sails, spars, and derricks, giving necessary height to a navigation light, look-out position, signal yard, control position, radio aerial or signal lamp. Large ships have several masts, with the size and configuration depending on the style of ship. Nearly all sailing masts are guyed.

<span class="mw-page-title-main">Yard (sailing)</span> Sail-carrying part of the rigging of a sailing ship

A yard is a spar on a mast from which sails are set. It may be constructed of timber or steel or from more modern materials such as aluminium or carbon fibre. Although some types of fore and aft rigs have yards, the term is usually used to describe the horizontal spars used on square rigged sails. In addition, for some decades after square sails were generally dispensed with, some yards were retained for deploying wireless (radio) aerials and signal flags.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<span class="mw-page-title-main">Bermuda rig</span> Configuration of mast and rigging for a type of sailboat

A Bermuda rig, Bermudian rig, or Marconi rig is a configuration of mast and rigging for a type of sailboat and is the typical configuration for most modern sailboats. This configuration was developed in Bermuda in the 17th century; the term Marconi, a reference to the inventor of the radio, Guglielmo Marconi, became associated with this configuration in the early 20th century, because the wires that stabilize the mast of a Bermuda rig reminded observers of the wires on early radio masts.

<span class="mw-page-title-main">Sail components</span> Features that define a (ship) sails shape and function

Sail components include the features that define a sail's shape and function, plus its constituent parts from which it is manufactured. A sail may be classified in a variety of ways, including by its orientation to the vessel and its shape,. Sails are typically constructed out of flexible material that is shaped by various means, while in use, to offer an appropriate airfoil, according to the strength and apparent direction of the wind. A variety of features and fittings allow the sail to be attached to lines and spars.

<span class="mw-page-title-main">Full-rigged ship</span> Sailing vessel with three or more square-rigged masts

A full-rigged ship or fully rigged ship is a sailing vessel with a sail plan of three or more masts, all of them square-rigged. Such a vessel is said to have a ship rig or be ship-rigged, with each mast stepped in three segments: lower, top, and topgallant.

<span class="mw-page-title-main">Reefing</span> Reducing the area of a sail

Reefing reduces the area of a sail, usually by folding or rolling one edge of the canvas in on itself and attaching the unused portion to a spar or a stay, as the primary measure to preserve a sailing vessel's stability in strong winds. Restoring full sail area is termed shaking out a reef.

<span class="mw-page-title-main">Spritsail</span>

The spritsail is a four-sided, fore-and-aft sail that is supported at its highest points by the mast and a diagonally running spar known as the sprit. The foot of the sail can be stretched by a boom or held loose-footed just by its sheets. A spritsail has four corners: the throat, peak, clew, and tack. The Spritsail can also be used to describe a rig that uses a spritsail.

A boat or yacht that is cat-rigged has a single mast, stepped well forward, carrying a single fore and aft sail, behind the mast. A boat that is cat-rigged can also be described as having a Una rig.

<span class="mw-page-title-main">Sail</span> Fabric or other surface supported by a mast to allow wind propulsion

A sail is a tensile structure, which is made from fabric or other membrane materials, that uses wind power to propel sailing craft, including sailing ships, sailboats, windsurfers, ice boats, and even sail-powered land vehicles. Sails may be made from a combination of woven materials—including canvas or polyester cloth, laminated membranes or bonded filaments, usually in a three- or four-sided shape.

The following outline is provided as an overview of and topical guide to sailing:

<span class="mw-page-title-main">Tanja sail</span> Oblique quadrilateral sail from south east Asia

Tanja sail or tanja rig is a type of sail commonly used by the Austronesian people, particularly in Maritime Southeast Asia. It is also known as the tilted square sail, canted rectangular sail, rectangular balance lug, or balance lug sail in English. In historical sources, a tanja sail is sometimes incorrectly referred to as a lateen sail or simply square sail.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

References

  1. Oxford English Dictionary
  2. Keegan, John (1989). The Price of Admiralty . New York: Viking. p.  280. ISBN   0-670-81416-4.
  3. Mannering, Julian, ed. (1997). The Chatham directory of inshore craft : traditional working vessels of the British Isles. London: Chatham Pub. ISBN   1-86176-029-9.
  4. The Viking ship's single square-rigged sail. http://Longshipco.org/sail.html Retrieved 2018-8-20