Victoria Bridge, Picton

Last updated

Victoria Bridge, Picton
Coordinates 34°10′49″S150°36′38″E / 34.18028°S 150.61056°E / -34.18028; 150.61056
CarriesPrince Street
CrossesStonequarry Creek
Locale Picton, Wollondilly Shire, New South Wales, Australia
Official nameVictoria Bridge over Stonequarry Creek
Named for Queen Victoria
Owner Transport for NSW
Characteristics
Design Allan truss
Material Ironbark timber
Total length83.4 m (274 ft)
Width3.7 m (12 ft)
Longest span27 m (90 ft)
No. of spans3
Clearance above 2.4 m (7 ft 10 in)
Clearance below 28 m (92 ft)
No. of lanes 1
History
Engineering design by Percy Allan
Constructed byC. J. Foord
Construction start1895
Construction end1897
Construction cost 3,700
Opened7 October 1897 [1]
Official nameVictoria Bridge over Stonequarry Creek
TypeState heritage (built)
Designated20 June 2000
Reference no.1484
TypeRoad Bridge
CategoryTransport – Land
Location
Victoria Bridge, Picton

The Victoria Bridge is a heritage-listed timber trestle truss road bridge across the Stonequarry Creek, located at Prince Street in the south-western Sydney town of Picton in the Wollondilly Shire local government area of New South Wales, Australia. The bridge is owned by Transport for NSW, an agency of the Government of New South Wales. The bridge is also known as the Victoria Bridge over Stonequarry Creek. It was added to the New South Wales State Heritage Register on 20 June 2000. [2] Designed by Percy Allan and opened on 7 October 1897, Victoria Bridge employs Allan trusses and was built by C. J. Ford of Sydney. [3]

Contents

It features the tallest trestles in New South Wales, and is one of the oldest surviving bridges of its type. [3] It is named after Queen Victoria, and is classified by the National Trust. Victoria Bridge is wide enough for a pedestrian walkway and one lane of traffic and is 83.4 m (274 ft) long. The bridge has a height limit of 2.4 m (7 ft 10 in). The bridge is listed by the Engineers Institute as historically significant. [4]

History

Picton

The town of Picton was named by Major Antill after Sir Thomas Picton in 1841. The location was previously known as "Stonequarry". The Duke of Wellington described Picton as a "rough foul-mouthed devil as ever lived" but very capable. He was "respected for his courage and feared for his irrascible temperament". He was chiefly remembered for his exploits under Wellington in the Iberinan Peninsular War displaying great bravery and persistence. He was killed at the Battle of Waterloo and was the most senior officer to die there. He was buried in the family vault at St. George's, Hanover Square in London. In 1859 Picton was re-interred in St. Paul's Cathedral, London, lying close to the body of the Duke of Wellington. [5] [2]

Victoria Bridge

Timber truss road bridges have played a significant role in the expansion and improvement of the NSW road network. Prior to the bridges being built, river crossings were often dangerous in times of rain, which caused bulk freight movement to be prohibitively expensive for most agricultural and mining produce. Only the high priced wool clip of the time was able to carry the costs and inconvenience imposed by the generally inadequate river crossings that often existed prior to the trusses construction. Timber truss bridges were preferred by the NSW Public Works Department from the mid 19th to the early 20th century because they were relatively cheap to construct, and used mostly local materials. The financially troubled governments of the day applied pressure to the Public Works Department to produce as much road and bridge work for as little cost as possible, using local materials. This condition effectively prohibited the use of iron and steel, as these, prior to the construction of the steel works at Newcastle in the early 20th century, had to be imported from England. [2]

Timber Allan trusses were the first truly scientifically engineered timber truss bridges, and incorporate American design ideas for the first time. This is a reflection of the changing mindset of the NSW people, who were slowly accepting that American ideas could be as good as or better than European ones. The high quality and low cost of the Allan truss design entrenched the dominance of timber truss bridges for NSW roads for the next thirty years. [2]

Percy Allan, the designer of Allan truss and other bridges, was a senior engineer of the NSW Public Works Department, and a prominent figure in late 19th century NSW. [2] Timber truss bridges, and timber bridges generally were so common that NSW was known to travellers as the "timber bridge state". [2]

Description

The Victoria Bridge is an Allan-type timber truss road bridge. It has three timber truss spans, each of 27.4 m (90 ft). There are no approach spans. The overall length of the bridge is 83.4 m (274 ft). The super structure is supported by timber trestles which carry a single-lane carriageway with a minimum width of 3.7 m (12 ft) and a footpath. A timber post and rail guard rail extends the full length of the bridge and an Armco barrier protects pedestrians from vehicular traffic. [2]

Condition

As of 10 July 2023, fair and intact.

Heritage listing

As at 15 June 2005, completed in 1897, the Victoria bridge is an early example of an Allan type timber truss road bridge, and in 1998 was in fair condition. As a timber truss road bridge, it has many associational links with important historical events, trends, and people, including the expansion of the road network and economic activity throughout NSW, and Percy Allan, the designer of this type of truss. Allan trusses were third in the five-stage design evolution of NSW timber truss bridges, and were a major improvement over the McDonald trusses which preceded them. Allan trusses were twenty per cent cheaper to build than McDonald trusses, could carry 50 per cent more load, and were easier to maintain. Having the tallest timber trestle supporting piers of any timber truss bridge, the Victoria bridge has an imposing appearance, and is both technically and aesthetically significant as a result. [2]

In 1998 there were 38 surviving Allan trusses in NSW of the 105 built, and 82 timber truss road bridges survive from the over 400 built. [2]

The Victoria bridge is a representative example of Allan timber truss road bridges, and is assessed as being State significant, primarily on the basis of its technical and historical significance. [2]

Victoria Bridge over Stonequarry Creek was listed on the New South Wales State Heritage Register on 20 June 2000 having satisfied the following criteria. [2]

The place is important in demonstrating the course, or pattern, of cultural or natural history in New South Wales.

Through the bridge's association with the expansion of the NSW road network, its ability to demonstrate historically important concepts such as the gradual acceptance of NSW people of American design ideas, and its association with Percy Allan, it has historical significance. [2]

The place is important in demonstrating aesthetic characteristics and/or a high degree of creative or technical achievement in New South Wales.

The bridge exhibits the technical excellence of its design, as all of the structural detail is clearly visible. In the context of its landscape it is visually attractive. As such, the bridge has substantial aesthetic significance. Having the tallest timber trestle supporting piers of any timber truss bridge, the Victoria bridge has an imposing appearance, and is both technically and aesthetically significant as a result. [2]

The place has a strong or special association with a particular community or cultural group in New South Wales for social, cultural or spiritual reasons.

Timber truss bridges are prominent to road travellers, and NSW has in the past been referred to as the "timber truss bridge state". Through this, the complete set of bridges gain some social significance, as they could be said to be held in reasonable esteem by many travellers in NSW. The Victoria bridge is valued by the people of the Picton district. [2]

The place possesses uncommon, rare or endangered aspects of the cultural or natural history of New South Wales.

Rare – In 1998 there were 38 surviving Allan trusses in NSW of the 105 built, and 82 timber truss road bridges survive from the over 400 built. [2]

The place is important in demonstrating the principal characteristics of a class of cultural or natural places/environments in New South Wales.

Representative of Allan truss bridges. [2]

See also

Related Research Articles

<span class="mw-page-title-main">Pyrmont Bridge</span> Heritage-listed bridge across Cockle Bay in Sydney, Australia

The Pyrmont Bridge, a heritage-listed swing bridge across Cockle Bay, is located in Darling Harbour, part of Port Jackson, west of the central business district in the City of Sydney local government area of New South Wales, Australia. Opened in 1902, the bridge initially carried motor vehicle traffic via the Pyrmont Bridge Road between the central business district and Pyrmont. Since 1981 the bridge has carried pedestrian and bicycle traffic only, as motor vehicles were diverted to adjacent freeway overpasses. The bridge was added to the New South Wales State Heritage Register on 28 June 2002, the centenary of its opening.

<span class="mw-page-title-main">Picton, New South Wales</span> Town in New South Wales, Australia

Picton is a small town in the Macarthur Region of New South Wales, Australia, in the Wollondilly Shire, in south-western Sydney. The town is located approximately 90 kilometres south-west of the Sydney CBD, close to Camden and Campbelltown. It is also the administrative centre of Wollondilly Shire.

<span class="mw-page-title-main">Historic bridges of New South Wales</span>

This list documents historical bridges located in New South Wales, Australia. Road, rail and pedestrian bridges are listed. Generally bridges built before World War II (1939) have been included in this list.

<span class="mw-page-title-main">Morpeth Bridge</span> Bridge in New South Wales, Australia

Morpeth Bridge is a heritage-listed road bridge over the Hunter River at Morpeth, New South Wales, Australia. It was designed by Percy Allan and built from 1896 to 1898 by Samuel McGill. It is also known as Morpeth Bridge over the Hunter River. The property is owned by Transport for NSW.

<span class="mw-page-title-main">Goodradigbee River Bridge</span> Bridge in New South Wales, Australia

The Goodradigbee River Bridge is a heritage-listed road bridge that carries Main Road across the Goodradigbee River in Wee Jasper, New South Wales, Australia. It was designed by Percy Allan and built in 1896 by W. J. Lansdown. The bridge is also known as the Wee Jasper Bridge over Goodradigbee River. The bridge is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Wallaby Rocks Bridge</span> Bridge in New South Wales, Australia

The Wallaby Rocks Bridge is a heritage-listed road bridge that carries Hill End Road across the Turon River, at Wallaby Rocks near Sofala, New South Wales, Australia. It was designed by Percy Allan and built in 1897 by E. Taylor of Balmain. The bridge is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Old Cobram-Barooga Bridge</span> Historic site in New South Wales, Australia

Old Cobram-Barooga Bridge is a heritage-listed former road bridge and now footbridge over the Murray River at Barooga-Cobram Road, Barooga, New South Wales, Australia. The bridge links Barooga with Cobram, its sister town in Victoria. It was designed by Ernest de Burgh (engineer) and the New South Wales Department of Public Works and built from 1900 to 1902. It is also known as RMS Bridge No 3247. It is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 1 April 2016.

<span class="mw-page-title-main">Murray River bridge, Barham</span> Bridge in New South Wales, Australia

The Murray River bridge is a heritage-listed road bridge that carries Main Road across the Murray River located at Barham in the Murray River Council local government area of New South Wales, Australia. It was designed by Department of Public Works and built in 1904 by John Monash. The bridge is also known as the Barham Bridge over Murray River and the Barham bridge. The bridge is owned by the Murray River Council and was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Murrumbidgee River bridge, Carrathool</span> Bridge in New South Wales, Australia

The Murrumbidgee River bridge, Carrathool is a heritage-listed road bridge that, until its closure in 2019, carried Carrathool Road across the Murrumbidgee River in Carrathool, New South Wales, Australia. The bridge is owned by Transport for NSW. The bridge is also called the Carrathool Bridge over Murrumbidgee River and provides a key connection between the Sturt Highway and the Murrumbidgee Road. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Coonamit Bridge</span> Bridge in New South Wales, Australia

The Coonamit Bridge is a heritage-listed road bridge that carries Swan Hill Road across the Wakool River, connecting Mallan and Dilpurra in the Riverina region of New South Wales, Australia. The bridge was designed by Harvey Dare and built in 1929. The bridge is owned by Transport for NSW and was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Murray River road bridge, Swan Hill</span> Bridge in New South Wales, Australia

The Murray River road bridge is a heritage-listed road bridge that carries Swan Hill Road across the Murray River, on the border between New South Wales and Victoria, Australia. The bridge connects Murray Downs in New South Wales with McCallum Street in Swan Hill, Victoria. The bridge was built in 1896 and is owned by Transport for NSW. The bridge is also called the Swan Hill Bridge and the Swan Hill-Murray River Road Bridge. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Tooleybuc Bridge</span> Bridge crossing Murray River in Victoria, Australia

The Tooleybuc Bridge is a dual heritage-listed road bridge that carries Tooleybuc Road across the Murray River, located in Tooleybuc, New South Wales, Australia. It was built in 1925. The bridge is owned by the Transport for NSW, and is also called the Tooleybuc Bridge over Murray River. The bridge was added to the New South Wales State Heritage Register on 20 June 2000 and the Victorian Heritage Register on 10 July 2008.

<span class="mw-page-title-main">Paterson River bridge, Vacy</span> Bridge in New South Wales, Australia

The Paterson River bridge, Vacy is a heritage-listed road bridge that carries Gresford Road across the Paterson River located in Vacy, New South Wales, Australia. It is situated about 300 metres south of the junction of Gresford Road and Summer Hill Road. The bridge was designed by Percy Allan and built in 1888 by Taylor and Littleproud. The bridge is also known as the Vacy Bridge over Paterson River. The bridge is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Colemans Bridge</span> Bridge in New South Wales, Australia

Colemans Bridge is a heritage-listed road bridge that carries Union Street across the Leycester Creek in Lismore, New South Wales, Australia. It was designed by Harvey Dare and built in 1907 by W. F. Oakes. The bridge is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Dunmore Bridge</span> Bridge in New South Wales, Australia

The Dunmore Bridge is a heritage-listed road bridge that carries Clarence Town Road across the Paterson River in Woodville, New South Wales, Australia. It was designed by Percy Allan and built in 1899 by Morpeth contractor, S. McGill. The property is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Paterson River bridge, Hinton</span> Bridge in New South Wales, Australia

The Hinton Bridge over Paterson River is a heritage-listed road bridge that carrier the Hinton-Morpeth Road across the Paterson River at Hinton, New South Wales, Australia. The bridge was designed by Ernest de Burgh and built in 1901. The bridge is owned by Transport for NSW. The bridge was added to the New South Wales State Heritage Register on 20 June 2000.

<span class="mw-page-title-main">Emu Plains Underbridge</span> Bridge in New South Wales, Australia

Emu Plains Underbridge is a heritage-listed steel truss railway underbridge located off Bruce Neale Dr approximately 1.3 kilometres (0.81 mi) west of the Penrith railway station in the western Sydney suburb of Penrith in the City of Penrith local government area of New South Wales, Australia. It was designed by James Fraser, the existing lines branch and the New South Wales Government Railways. It was built in 1907, with fabrication by R. Tulloch & Co.; and erection by day labour. It is also known as Emu Plains Underbridge and Penrith Underbridge. The property is owned by Transport Asset Holding Entity, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 28 June 2013.

Beckers Bridge is a heritage-listed timber truss road bridge that carries Main Road across Webbers Creek, located in Glendon Brook, New South Wales, Australia. It was designed by Ernest de Burgh. The bridge is owned by Transport for NSW.

The Glennies Creek Bridge is a heritage-listed road bridge that carries the Rixs Creek-Falbrook Road across the Glennies Creek, located at Middle Falbrook, New South Wales, Australia. The bridge was designed by Ernest de Burgh and built in 1902-03 by William Murphy and James Taylor. The property is owned by Transport for NSW. The bridge was added to the New South Wales State Heritage Register on 20 June 2000.

The Wollombi Brook bridge is a heritage-listed road bridge that carries Putty Road across the Wollombi Brook at Bulga, New South Wales, Australia. The bridge was designed by Harvey Dare and built in 1912. The bridge is owned by Transport for NSW. The bridge was added to the New South Wales State Heritage Register on 20 June 2000.

References

  1. "CHRISTENING A NEW BRIDGE". The Sydney Morning Herald . No. 18, 585. New South Wales, Australia. 8 October 1897. p. 5. Archived from the original on 1 February 2022. Retrieved 2 October 2016 via National Library of Australia.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 "Victoria Bridge over Stonequarry Creek". New South Wales State Heritage Register . Department of Planning & Environment. H01484. Retrieved 2 June 2018. CC BY icon.svg Text is licensed by State of New South Wales (Department of Planning and Environment) under CC-BY 4.0 licence .
  3. 1 2 "Victoria Bridge – Picton" (PDF). Institution of Engineers, Australia. Archived from the original (PDF) on 31 December 2006.
  4. "Nomination of the Victoria Bridge Picton" (PDF). Engineers Australia . Archived (PDF) from the original on 2 October 2016. Retrieved 2 October 2016.
  5. Wheeldon, 2015, 3.

Bibliography

Attribution

CC BY icon-80x15.png This Wikipedia article contains material from Victoria Bridge over Stonequarry Creek , entry number 01484 in the New South Wales State Heritage Register published by the State of New South Wales (Department of Planning and Environment) 2018 under CC-BY 4.0 licence , accessed on 2 June 2018.