The Victorian Railways J class was a branch linesteam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time. They should not be confused with an earlier group of five 2-4-0 locomotives built by Beyer, Peacock & Co. in 1860, also designated as J class.[1]
During the early 1950s, the Victorian Railways (VR) embarked on a massive upgrading of its ageing locomotive fleet as part of "Operation Phoenix", an £80 million program to rebuild a network badly run down by years of underinvestment during the Great Depression, and the heavy workload imposed by World War II.[2]
Victoria's branch line railway network, laid with 60lb/yd (29.8kg/m)rail and featuring gradients of up to 1 in 30 (3.33%), was still largely served by the D1, D2 and D3 variants of the once 261-strong 1902-era Dd class4-6-0 which, by the early 1950s, were at the end of their life.[3] The new J class locomotives were supplemented by 53 K class locomotives, some of which had been built as recently as 1946. Although highly successful, K class locomotives were unsuitable for conversion from 5ft3in (1,600mm) to 4ft8+1⁄2in (1,435mm) standard gauge in the event of the Victorian network being standardised, and VR policy was for all new locomotives to be engineered for easy conversion.[4] Consequently, the building of further K class was not a feasuble option.
With mainline electric and diesel-electric locomotives already on order, the VR design team opted for an updated, gauge-convertible K class, which would turn out to be their final steam locomotive design.
Design features
Firebox and boiler, in storageJ class 'SCOA-P' pattern driving wheel centres
The key problem with the K class design was the placement of the firebox between the locomotive frame and rear driving wheels, making conversion to a narrower gauge impossible without a radical redesign of the firebox. A previous attempt to develop a gauge-convertible K class, the N class, utilised a 2-8-2 wheel arrangement and positioned the firebox above the frames and behind the driving wheels. However, the extra length of those locomotives (being a total 67ft or 20.42m long) made them unsuitable for a number of branch lines where only a 50-or-53-foot (15.24 or 16.15m)turntable was available.
The J class adopted an alternative approach to the problem by employing a high-set boiler (with the boiler centre 9ft 2+1⁄2in (2.807m) above rail level,[5] compared with 8ft 4in (2.54m) for the K class[6]) setting the firebox above the frames and driving wheels, and retaining the K class' short wheelbase.
The J class also featured a number of other design advances over the K class. It had a larger grate, enabling grate sections to be compatible with those of the N class and permitting an increase in firebox volume sufficient to allow two arch tubes to be installed.[7] Another innovation was the use of a regulator valve incorporating a centrifugal steam separator (to draw away any water and thus provide the driest steam), rather than the simpler (though extremely reliable) D regulator valve used in the K class.[7] The J class also featured substantially redesigned cylinder porting to improve steam flow and efficiency.[8] The innovative SCOA-P type driving wheel centre developed for the Victorian Railways R class was adapted for the 55in (1,397mm) diameter J class drivers.
The high-set boiler, together with the German-style smoke deflectors, gave the J class a distinctly European appearance.[4]
Production
A total of fifty J class locomotives were initially ordered from the Vulcan Foundry in Lancashire, England. However, the VR reassessed its motive power requirements and opted to sell ten of its brand-new, second-generation N class locomotives to the South Australian Railways, and increased the J class order to sixty locomotives.[9] At the time of order, the per-unit cost of the locomotives was £36,000 ($72,000) each.[10]
With fluctuating oil prices and an unreliable supply of coal in the early 1950s, the VR appeared to take something of a bet either way, ordering thirty of the class as coal burners and thirty as oil burners.[4]
By the time the contract for the J class had been awarded, the VR had already begun to receive deliveries of the B class mainline diesel-electric locomotives, and it unsuccessfully attempted to cancel the J class contract in favour of an order for branch line diesel locomotives.[7]
Service
The J class was introduced for both passenger and goods traffic on Victoria's branch line network, with a maximum permissible speed of 45mph (72km/h), later raised to 50mph (80km/h). Dynamometer car tests showed the locomotive developed 930hp (694kW) at the drawbar at around 20–25mph (32–40km/h), which suited the relatively low speed limits of much of the Victorian branch line network.[7]
Coal-fired J class locomotives were the regular engine on the 09:00 Melbourne to Yarram passenger service, with other duties being from Lilydale to Warburton and local services from Spencer Street to Werribee. The oil-fired J was also pressed into service hauling the final leg of The Gippslander express from Sale to Bairnsdale. In their later years, J class locomotives also ran the Horsham to Dimboola leg of the morning service from Melbourne, one of the last regular steam-hauled passenger train services in Victoria.[7]
Although J class locomotives produced the same nominal tractive effort as the K or N class, they had a slightly higher adhesive weight (and so a better factor of adhesion) and were permitted to haul heavier loads on gradients.[11] They could be found in goods service on branch lines across the state, but were also found on mainlines, running roadside goods services.[7]
Within a year of the introduction of the J class, the T class diesel electric locomotive was also introduced. Although the VR did not publicly indicate the T was intended to replace the J class,[12] the T class proved to be such a successful design that further orders of that locomotive class were made during the late 1950s and 1960s, and T class units gradually displaced the J class from many of the latter's normal duties.
Design Improvements
Together with the K and N classes, the J class had its boiler pressure raised in the early 1960s from 175 to 180psi (1,207 to 1,241kPa),[7] which raised their nominal tractive effort to 29,500lbf (131kN).
Following recommendations from the 1957 Australian and New Zealand Railway Conference, locomotive J 546 was selected for the installation of a Laidlaw-Drew oil firing system in place of the convention weir-type burner. However, the locomotive was found to steam poorly under load using the Laidlaw-Drew system and was converted back to weir burner operation. No further locomotives were converted.[7]
Demise
By the late 1960s, the J class was largely relegated to shunting at various country yards, with many losing their cowcatchers and gaining shunter's steps on sides of the tender. The introduction of the Y class diesel electrics saw the J class even superseded in that role and, in November 1967, J523 became the first J class to be scrapped.[13] Scrappings continued until June 1978, with J538 the last to go.[13] J550 holds the distinction of being the very last steam locomotive in normal revenue service on the Victorian Railways, being rostered on the 6 a.m. Bendigo pilot on 25 May 1972.[9]
The J class lasted as a complete class later than any other VR steam locomotive class. By the time that J class scrapping commenced, interest in railway preservation was sufficient for eleven examples to be preserved.[14]
Operational
J549: Owned and operated by the Victorian Goldfields Railway, the locomotive was out of service between March 2004 and October 2013, undergoing a major overhaul. It underwent load trials along the Maldon branch line on 21 October 2013, and its first public outing was on 26 October 2013. The official re-launch of the engine was held on 27 January 2014.[15]
Under Restoration
J515: Owned by Seymour Railway Heritage Centre and loaned to Victorian Goldfields Railway in December 2006, it was returned to service April 2012 after two years out of traffic due to boiler repairs. It was returned to Seymour Railway Heritage Centre in January 2015 for an overhaul.[16]
J541: Transferred to Newport Workshops April 2012, after its lease to Victorian Goldfields Railway ended. Whilst at Newport Workshops, repairs and maintenance was to be carried out by Steamrail Victoria, prior to its transfer to a new home at Yarra Valley Tourist Railway. It is owned by a private syndicate, which includes Yarra Valley Railway members and the railway itself.
J512 is owned by Seymour Railway Heritage Centre and is awaiting restoration. As part of the restoration, it is to be converted from broad to standard gauge.[17]As of March2010[update], the engine frames had been converted.
J516 is owned by the Yarra Valley Tourist Railway. In June 2009, it was being stripped down for a restoration assessment.
J550 was plinthed at Warragul until 24 March 2013. It is now on public display at Noojee, ahead of a planned restoration to working order.[19]
J556, is preserved at the Newport Railway Museum in Newport, Victoria, wearing the historically significant plates of scrapped J559, the last steam locomotive to enter service on the VR.
Model Railways
HO scale
Steam Era Models has produced a brass and white metal kit for the J Class steam locomotive, as items L9C and L9O for Coal and Oil-burning models respectively.[20][21]
Trainbuilder has released a ready-to-run brass model of the class, featuring numbers J500, 502, 508, 510, 518, 520, 523 as Coal Burners, and 531, 535, 538, 541, 544, 552, 555 and 558 as Oil Burners.[22][23]
Ixion Models have released a ready-to-run plastic model, featuring numbers J500, J506, J507, J515, J519, J525 as Coal Burners, and J535, J541, J544, J549, J554, J556 as Oil Burners.[24][25]
Related Research Articles
The Victorian Goldfields Railway is a 1,600 mm broad gauge tourist railway in Victoria, Australia. It operates along a formerly disused branch line between the towns of Maldon and Castlemaine.
The F Class were a class of diesel locomotive shunters built by Dick Kerr Works for the Victorian Railways between 1951 and 1953. They are similar to the British Rail Class 11 and NS Class 600 shunting locomotives also built by English Electric during this period, but modified for use on the VR's 5 ft 3 in (1,600 mm) broad gauge.
The NZR JA class were a type of 4-8-2 steam locomotive used on the New Zealand railway network. The class was built in two batches, the first batch was built at Dunedin's Hillside Workshops between 1946 and 1956 and the second batch by the North British Locomotive Works in 1951. To distinguish between the batches, locomotives are identified by their maker.
The NZR J class steam locomotives were a type of 4-8-2 steam locomotive built for the New Zealand Railways Department (NZR) and used on the New Zealand railway network. Built by the North British Locomotive Works, although designed to work on the lighter secondary lines the class was frequently used on mainline express passenger trains as well as freight. The class first appeared in distinctive streamlining, which was later removed from 1947 onwards for maintenance reasons. The class should not be confused with the earlier 1874 J class. Three J class lasted until the end of steam-hauled services on 26 October 1971, three locomotives of the forty built have been preserved.
The Spirit of Progress was the premier express passenger train on the Victorian Railways in Australia, running from Melbourne to the New South Wales border at Albury, and later through to Sydney.
The Victorian Railways X class was a mainline goods locomotive of the 2-8-2 'Mikado' type operated by the Victorian Railways (VR) between 1929 and 1960. They were the most powerful goods locomotive on the VR, aside from the single H class, H220, which was confined to the North East line, until the advent of diesel-electric traction, and operated over the key Bendigo, Wodonga, and Gippsland mainlines.
The C class was a mainline goods locomotive of the 2-8-0 'Consolidation' type that ran on the Victorian Railways between 1918 and 1962. Although its original design had some key shortcomings, a number of improvements were made over the class' long career on the VR, many of which were subsequently applied to other locomotive classes on the system.
The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. A highly successful design entirely the work of Victorian Railways' own design office, its long service life was repeatedly extended as economic depression and war delayed the introduction of more modern and powerful replacement locomotives.
An oil burner engine is a steam engine that uses oil as its fuel. The term is usually applied to a locomotive or ship engine that burns oil to heat water, to produce the steam which drives the pistons, or turbines, from which the power is derived.
The Victorian Railways S class was a class of 4-6-2 express passenger steam locomotive operated by the Victorian Railways (VR) in Australia between 1928 and 1954. Built when the VR was at its zenith and assigned to haul the broad gauge-leg of its Melbourne to Sydney interstate express passenger services, the S class remained the VR's most prestigious locomotive class until the advent of diesel electric locomotives in the early 1950s.
The K class was a branch line steam locomotive that ran on Victorian Railways in Australia from 1922 to 1979. Although its design was entirely conventional and its specifications unremarkable, the K class was in practice a remarkably versatile and dependable locomotive. It went on to outlast every other class of steam locomotive in regular service on the VR, and no fewer than 21 examples of the 53 originally built have survived into preservation.
The N class was a branch line steam locomotive that ran on Victorian Railways from 1925 to 1966. A development of the successful K class 2-8-0, it was the first VR locomotive class designed for possible conversion from 5 ft 3 in to 4 ft 8+1⁄2 instandard gauge.
The Victorian Railways H class was an express passenger steam locomotive operated by the Victorian Railways from 1941 to 1958. Intended to eliminate the use of double heading A2 class locomotives on The Overland services on the steeply graded Western line to Adelaide, wartime restrictions led to only one locomotive being built. Nicknamed Heavy Harry, H220 was the largest locomotive ever built in Australia and the largest non-articulated steam locomotive to run on Australian railways.
The R class was an express passenger steam locomotive that ran on Australia's Victorian Railways (VR) from 1951 to 1974. A long overdue replacement for the 1907-era A2 class 4-6-0, their development and construction was repeatedly delayed due to financial constraints caused by the Great Depression and later the manpower and materials shortages of World War II and the immediate postwar period.
The DD class (later reclassified into D1, D2 and D3 subclasses) was a passenger and mixed traffic steam locomotive that ran on Victorian Railways from 1902 to 1974. Originally introduced on mainline express passenger services, they were quickly superseded by the much larger A2 class and were relegated to secondary and branch line passenger and goods service, where they gave excellent service for the next fifty years. The DD design was adapted into a 4-6-2T tank locomotive for suburban passenger use, the DDE (later D4) class. They were the most numerous locomotive class on the VR, with a total of 261 DD and 58 locomotives built.
The B class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways in 1952–1953. Ordered and operated by the Victorian Railways, they initiated the dieselisation of the system and saw use on both passenger and freight services, with many remaining in service today, both in preserved and revenue service. Some were rebuilt as the V/Line A class, while others have been scrapped.
The Victorian Railways NA class is a 2-6-2 tank locomotive built for their four 2 ft 6 in gauge branch lines.
The AA class was an express passenger locomotive that ran on the Victorian Railways between 1900 and 1932. The largest, heaviest and most powerful 4-4-0 steam locomotive to run in Australia, it was the final development of this locomotive type in Australia.
The mainline passenger locomotives, later classified as B class, ran on the Victorian Railways (VR) between 1862 and 1917. They used a 2-4-0 wheel arrangement, which provided greater traction on the new, more heavily graded Geelong–Ballarat railway and the Melbourne-Bendigo-Echuca railway, as opposed to the 2-2-2 arrangement previously selected for the relatively level Geelong line. The B class locomotives are regarded as the first mainline VR motive power, and were highly successful in passenger operations.
The pattern suburban E class tank loco was built by Kitson & Co of Leeds, England, in 1888 and was a typical British tank engine of the 2-4-2 wheel arrangement. The original loco, named "Tasmania" by the builder, was displayed in the Centennial International Exhibition in the Melbourne Exhibition Buildings in 1888.
References
↑ Cave, Norman; Buckland, John; Beardsell, David (2002). Steam Locomotives of the Victorian Railways: the First Fifty Years. Melbourne: Australian Railway Historical Society (Victorian Division). p.23 ff. ISBN1876677384.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
