Victorian Railways J class | |||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() J515 on the Victorian Goldfields Railway in January 2007 | |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
|
The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time. [1]
During the early 1950s, the Victorian Railways (VR) embarked on a massive upgrading of its ageing locomotive fleet as part of Operation Phoenix, an £80 million program to rebuild a network badly run down by years of underinvestment during the Great Depression, and the heavy workload imposed by World War II. [2]
Victoria's branch line railway network, laid with 60 lb/yd (29.8 kg/m ) rail and featuring gradients of up to 1 in 30 (3.33%), was still largely served by the D1, D2 and D3 variants of the once 261-strong 1902-era Dd class 4-6-0 which, by the early 1950s, were at the end of their life. [3] The new J class locomotives were supplemented by 53 K class locomotives, some of which had been built as recently as 1946. Although highly successful, K class locomotives were unsuitable for conversion from 5 ft 3 in (1,600 mm) to 4 ft 8+1⁄2 in (1,435 mm) standard gauge in the event of the Victorian network being standardised, and VR policy was for all new locomotives to be engineered for easy conversion. [4] [5] Consequently, the building of further K class was not a feasible option.
With mainline electric and diesel-electric locomotives already on order, the VR design team opted for an updated, gauge-convertible K class, which would turn out to be their final steam locomotive design. [6] [7] [8]
The key problem with the K class design was the placement of the firebox between the locomotive frame and rear driving wheels, making conversion to a narrower gauge impossible without a radical redesign of the firebox. A previous attempt to develop a gauge-convertible K class, the N class, utilised a 2-8-2 wheel arrangement and positioned the firebox above the frames and behind the driving wheels. However, the extra length of those locomotives (being a total 67 ft or 20.42 m long) made them unsuitable for a number of branch lines where only a 50-or-53-foot (15.24 or 16.15 m) turntable was available. The J class adopted an alternative approach to the problem by employing a high-set boiler (with the boiler centre 9 ft 2+1⁄2 in (2.807 m) above rail level, [9] compared with 8 ft 4 in (2.54 m) for the K class [10] ) setting the firebox above the frames and driving wheels, and retaining the K class' short wheelbase.
The J class also featured a number of other design advances over the K class. It had a larger grate, enabling grate sections to be compatible with those of the N class and permitting an increase in firebox volume sufficient to allow two arch tubes to be installed. [11] Another innovation was the use of a regulator valve incorporating a centrifugal steam separator (to draw away any water and thus provide the driest steam), rather than the simpler (though extremely reliable) D regulator valve used in the K class. [11] The J class also featured substantially redesigned cylinder porting to improve steam flow and efficiency. [12] The innovative SCOA-P type driving wheel centre developed for the Victorian Railways R class was adapted for the 55 in (1,397 mm) diameter J class drivers.
The high-set boiler, together with the German-style smoke deflectors, gave the J class a distinctly European appearance. [5]
A total of fifty J class locomotives were initially ordered from the Vulcan Foundry in Lancashire, England. However, the VR reassessed its motive power requirements and opted to sell 10 of its brand-new, second-generation N class locomotives to the South Australian Railways, and increased the J class order to 60. [13] [14] At the time of order, the per-unit cost of the locomotives was £36,000 ($72,000) each. [15]
With fluctuating oil prices and an unreliable supply of coal in the early 1950s, the VR appeared to take something of a bet either way, ordering thirty of the class as coal burners and thirty as oil burners. [5]
By the time the contract for the J class had been awarded, the VR had already begun to receive deliveries of the B class mainline diesel-electric locomotives, and it unsuccessfully attempted to cancel the J class contract in favour of an order for branch line diesel locomotives. [11]
The J class was introduced for both passenger and goods traffic on Victoria's branch line network, with a maximum permissible speed of 45 mph (72 km/h), later raised to 50 mph (80 km/h). Dynamometer car tests showed the locomotive developed 930 hp (694 kW) at the drawbar at around 20–25 mph (32–40 km/h), which suited the relatively low speed limits of much of the Victorian branch line network. [11]
Coal-fired J class locomotives were the regular engine on the 09:00 Melbourne to Yarram passenger service, with other duties being from Lilydale to Warburton and local services from Spencer Street to Werribee. The oil-fired J was also pressed into service hauling the final leg of The Gippslander express from Sale to Bairnsdale. In their later years, J class locomotives also ran the Horsham to Dimboola leg of the morning service from Melbourne, one of the last regular steam-hauled passenger train services in Victoria. [11]
Although J class locomotives produced the same nominal tractive effort as the K or N class, they had a slightly higher adhesive weight (and so a better factor of adhesion) and were permitted to haul heavier loads on gradients. [16] They could be found in goods service on branch lines across the state, but were also found on mainlines, running roadside goods services. [11]
Within a year of the introduction of the J class, the T class diesel electric locomotive was also introduced. Although the VR did not publicly indicate the T was intended to replace the J class, [17] the T class proved to be such a successful design that further orders of that locomotive class were made during the late 1950s and 1960s, and T class units gradually displaced the J class from many of the latter's normal duties.
Together with the K and N classes, the J class had its boiler pressure raised in the early 1960s from 175 to 180 psi (1,207 to 1,241 kPa), [11] which raised their nominal tractive effort to 29,500 lbf (131 kN ).
Following recommendations from the 1957 Australian and New Zealand Railway Conference, locomotive J546 was selected for the installation of a Laidlaw-Drew oil firing system in place of the convention weir-type burner. However, the locomotive was found to steam poorly under load using the Laidlaw-Drew system and was converted back to weir burner operation. No further locomotives were converted. [11]
By the late 1960s, the J class was largely relegated to shunting at various country yards, with many losing their cowcatchers and gaining shunter's steps on sides of the tender. The introduction of the Y class diesel electrics saw the J class even superseded in that role and, in November 1967, J523 became the first J class to be scrapped. [18] Scrappings continued until June 1978, with J538 the last to go. [18] J550 holds the distinction of being the very last steam locomotive in normal revenue service on the Victorian Railways, being rostered on the 6 a.m. Bendigo pilot on 25 May 1972. [14]
The J class lasted as a complete class later than any other VR steam locomotive class. By the time that J class scrapping commenced, interest in railway preservation was sufficient for eleven examples to be preserved. [20]
Rail transport in the Australian state of Victoria is provided by a number of railway operators who operate over the government-owned railway lines. The network consists of 2,357 km of Victorian broad gauge lines, and 1,912 km of standard gauge freight and interstate lines; the latter increasing with gauge conversion of the former. Historically, a few experimental 762 mm gauge lines were built, along with various private logging, mining and industrial railways. The rail network radiates from the state capital, Melbourne, with main interstate links to Sydney and to Adelaide, as well as major lines running to regional centres, upgraded as part of the Regional Fast Rail project.
The Victorian Goldfields Railway is a 1,600 mm broad gauge tourist railway in Victoria, Australia. It operates along a formerly disused branch line between the towns of Maldon and Castlemaine.
The F Class are a class of diesel locomotive shunters built by Dick Kerr Works for the Victorian Railways between 1951 and 1953. They are similar to the British Rail Class 11 and NS Class 600 shunting locomotives also built by English Electric during this period, but modified for use on the VR's 5 ft 3 in (1,600 mm) broad gauge.
3801 is a 4-6-2 steam locomotive operated by the New South Wales Government Railways between 1943 and 1974. It is arguably Australia's most famous steam locomotive, being the only one to have visited all mainland states and territories.
The Victorian Railways X class was a mainline goods locomotive of the 2-8-2 'Mikado' type operated by the Victorian Railways (VR) between 1929 and 1960. They were the most powerful goods locomotive on the VR, aside from the single H class, H220, which was confined to the North East line, until the advent of diesel-electric traction, and operated over the key Bendigo, Wodonga, and Gippsland mainlines.
The C class was a mainline goods locomotive of the 2-8-0 'Consolidation' type that ran on the Victorian Railways between 1918 and 1962. Although its original design had some key shortcomings, a number of improvements were made over the class' long career on the VR, many of which were subsequently applied to other locomotive classes on the system.
The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. A highly successful design entirely the work of Victorian Railways' own design office, its long service life was repeatedly extended as the Great Depression and later World War II delayed the introduction of more modern and powerful replacement locomotives.
The Victorian Railways S class was a class of 4-6-2 express passenger steam locomotive operated by the Victorian Railways (VR) in Australia between 1928 and 1954. Built when the VR was at its zenith and assigned to haul the broad gauge-leg of its Melbourne to Sydney interstate express passenger services, the S class remained the VR's most prestigious locomotive class until the advent of diesel electric locomotives in the early 1950s.
The K class was a branch line steam locomotive that ran on Victorian Railways in Australia from 1922 to 1979. Although its design was entirely conventional and its specifications unremarkable, the K class was in practice a remarkably versatile and dependable locomotive. It went on to outlast every other class of steam locomotive in regular service on the VR, and no fewer than 21 examples of the 53 originally built have survived into preservation.
The N class was a branch line steam locomotive that ran on the Victorian Railways (VR) from 1925 to 1966. A development of the successful K class 2-8-0, it was the first VR locomotive class designed for possible conversion from 5 ft 3 in to 4 ft 8+1⁄2 instandard gauge.
The Victorian Railways H class was an express passenger steam locomotive operated by the Victorian Railways from 1941 to 1958. Intended to eliminate the use of double heading A2 class locomotives on The Overland services on the steeply graded Western line to Adelaide, wartime restrictions led to only one locomotive being built. Nicknamed Heavy Harry, H220 was the largest locomotive ever built in Australia and the largest non-articulated steam locomotive to run on Australian railways.
The R class was an express passenger steam locomotive that ran on Australia's Victorian Railways (VR) from 1951 to 1974. A long overdue replacement for the 1907-era A2 class 4-6-0, their development and construction was repeatedly delayed due to financial constraints caused by the Great Depression and later the manpower and materials shortages of World War II and the immediate postwar period.
The DD class (later reclassified into D1, D2 and D3 subclasses) was a passenger and mixed traffic steam locomotive that ran on Victorian Railways from 1902 to 1974. Originally introduced on mainline express passenger services, they were quickly superseded by the much larger A2 class and were relegated to secondary and branch line passenger and goods service, where they gave excellent service for the next fifty years. The DD design was adapted into a 4-6-2T tank locomotive for suburban passenger use, the DDE (later D4) class. They were the most numerous locomotive class on the VR, with a total of 261 DD and 58 locomotives built.
The Victorian Railways L class was a class of electric locomotives built by English Electric and operated by the Victorian Railways and later V/Line from 1953 until 1987 primarily on the Gippsland line. They were the only class of main line electric locomotive operated in Victoria.
The B class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways in 1952–1953. Ordered and operated by the Victorian Railways, they initiated the dieselisation of the system and saw use on both passenger and freight services, with many remaining in service today, both in preserved and revenue service. Some were rebuilt as the V/Line A class, while others have been scrapped.
The S class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways between 1957 and 1961.
The Victorian Railways NA class is a 2-6-2 tank locomotive built for their four 2 ft 6 in gauge branch lines.
The AA class was an express passenger locomotive that ran on the Victorian Railways between 1900 and 1932. The largest, heaviest and most powerful 4-4-0 steam locomotive to run in Australia, it was the final development of this locomotive type in Australia.
The Victorian Railways E class was a class of electric locomotive that ran on the Victorian Railways (VR) from 1923 until 1984. Introduced shortly after the electrification of the suburban rail system in Melbourne, Australia, and based on the same electrical and traction equipment as Melbourne's early suburban electric multiple unit fleet, they provided power for suburban goods services and shunting for six decades.
The E class was a class of suburban tank steam locomotive that ran on Australia's Victorian Railways (VR).
Media related to Victorian Railways J class steam locomotives at Wikimedia Commons