Victorian Railways V class (1857)

Last updated

Victorian Railways V class (1857)
Type and origin
Power typeSteam
Builder George England and Co., Newcastle upon Tyne, UK
Serial number142 - 145
Build date1857
Total produced4
Specifications
Configuration:
   Whyte 0-6-0
Gauge 5 ft 3 in (1,600 mm) Victorian broad gauge
Driver dia.5 ft 0 in (1,520 mm) [1]
Tender wheels3 ft 6 in (1.07 m) [1]
Wheelbase 31 ft 11+12 in (9.741 m) [1]
  Coupled15 ft 0 in (4.57 m) [1]
  Tender10 ft 2 in (3.10 m) [1]
Length:
  Over couplers42 ft 8+12 in (13.018 m) [1]
Height13 ft 3 in (4.04 m) [1]
Axle load 10  long tons  12 cwt (23,700 lb or 10.8 t) [2]
Reboilered 1880's: 12  long tons  8 cwt (27,800 lb or 12.6 t) [1]
Loco weight30  long tons  6 cwt (67,900 lb or 30.8 t) [2]
Reboilered 1880's: 30  long tons  8 cwt 2 qr (68,150 lb or 30.91 t) [1]
Tender weight18  long tons  16 cwt (42,100 lb or 19.1 t) [2]
Reboilered 1880's: 19  long tons  2 cwt (42,800 lb or 19.4 t) [1]
Total weight49  long tons  2 cwt (110,000 lb or 49.9 t) [2]
Reboilered 1880's: 49  long tons  10 cwt 2 qr (110,940 lb or 50.32 t) [1]
Fuel capacity60  long cwt (6,700 lb or 3,000 kg) [1]
Water cap.1,646 imp gal (7,480 L; 1,977 US gal) [1]
Firebox:
  Grate area14.81 sq ft (1.376 m2) [2]
Boiler pressureReboilered 1880's: 130  psi (896  kPa)
Heating surface:
  Firebox90.89 sq ft (8.444 m2) [2]
  Tubes1,287.77 sq ft (119.638 m2) [2]
  Total surface1,378.66 sq ft (128 m2) [2]
Cylinders 2, inside
Cylinder size 16 in × 22 in (406 mm × 559 mm) [2]
Performance figures
Tractive effort Reboilered 1880's: 9,386  lbf (41.75  kN) at 100 psi [2]
Career
Operators Victorian Railways
Number in class4
Numbers1-4, Later 2-5, 1860: 11-17 (odd only), 1895: 497
Delivered1858
First run16 September 1858
Last run13 September 1904
(45.7 years)
Withdrawn1891 - 1904
DispositionAll scrapped

The Victorian Railways V class of 1857 was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1858 and 1904, built by George England and Co., Newcastle upon Tyne, England.

Contents

History

Victorian Railways initially numbered passenger and goods locomotives separately. The goods engines were numbered 1–4 (the first passenger engine was also numbered 1). This was changed to consecutive numbering between June 1859 and March 1860 with the goods locos being numbers 2–5. [3] With the introduction of the J class in 1860, to avoid confusion these were temporarily altered to 2A–5A. The numbering was once again changed in the late 1860's to odd numbers for goods locomotives and even numbers for passenger locos with these locomotives taking the odd numbers 11–17. [3] This odd and even system remained in use until 1912. In 1886, they were allocated to Class V.

Production

The four locomotives were built in 1857 with builder's numbers 142–145 at a cost of £2300, +£900 freight and insurance, for each loco. The first arrived in Port Phillip on 12 May 1858 along with 2-2-2 passenger locomotive No. 1, the remaining three arrived in Port Phillip on 31 May 1858. [4] [3]

Regular service

In addition to regular goods service, some were loaned to contractors, like Cornish & Bruce, for line construction and ballasting purposes. In 1894, it was noted that three were allocated one each to Daylesford, Geelong, and Sale. [3]

Design improvements

Over the years they were fitted with various new cabs. There were also various upgrades over the years; with constant improvements to safety — these including things like updates to safety valves (and domes), brakes, and cowcatchers — and improvements for their useability — handrails and footboards. [3] The original brakes provided was a hand brake on the tender with wood blocks on all six wheels. This was upgraded to steam brakes on the engines in 1884-1886, and at least two (V15 and V17) were later fitted with Westinghouse air brakes [3] .
New boilers with a working pressure of 130psi were fitted, starting with V11 in 1880, and the remaining 3 locomotives in 1884-1885. [3]

Accidents

Demise

All the locomotives were removed from the Victorian Railways register between 1891 and 1904. V13 was sold to an unknown buyer in 1893, then bought back and renumbered 497 (unclassed). [5] [3] V11 was sold in May 1891 to contractor Andrew O'Keefe for £1900($2700). [3] The remaining locomotives were withdrawn in 1904, with the last V15 being withdrawn on 13 September.

Fleet summary

Key:In ServicePreservedStored or withdrawnScrapped
LocomotivePrevious numbersBuilder No.Entered serviceWithdrawnScrappedStatusNotes
V111, 2, 2A142January 1859May 1891ScrappedNew cab - 1880. Sold to O'Keefe (£1900) - May 1891 [3]
V132, 3, 3A143January 18591893-Sold - 1893 [3]
V153, 4, 4A144January 185913 September 1904ScrappedNew chimney - 23 October 1882. Reboilered - 9 May 1884 [3]
V174, 5, 5A145January 18598 August 1904Scrapped [3]
497(ex V13)14412 December 18957 September 1904ScrappedRepurchased by Victorian Railway [3]

Related Research Articles

<span class="mw-page-title-main">Victorian Railways X class</span> Class of Australian 2-8-2 steam locomotives

The Victorian Railways X class was a mainline goods locomotive of the 2-8-2 'Mikado' type operated by the Victorian Railways (VR) between 1929 and 1960. They were the most powerful goods locomotive on the VR, aside from the single H class, H220, which was confined to the North East line, until the advent of diesel-electric traction, and operated over the key Bendigo, Wodonga, and Gippsland mainlines.

<span class="mw-page-title-main">Victorian Railways AA class</span> Class of Australian 4-4-0 steam locomotives

The AA class was an express passenger locomotive that ran on the Victorian Railways between 1900 and 1932. The largest, heaviest and most powerful 4-4-0 steam locomotive to run in Australia, it was the final development of this locomotive type in Australia.

<span class="mw-page-title-main">Victorian Railways B class (1861)</span> Class of Australian 2-4-0 steam locomotives

The Victorian Railways B class was a class of 2-4-0 passenger locomotives operated by the Victorian Railways (VR) between 1862 and 1917, built by various builders. The B class locomotives are regarded as the first mainline VR motive power, and were highly successful in passenger operations.

<span class="mw-page-title-main">Victorian Railways E class</span> Class of Australian 2-4-2 steam locomotives

The E class was a class of suburban tank steam locomotive that ran on Australia's Victorian Railways (VR).

<span class="mw-page-title-main">Victorian Railways F class (1874)</span> Class of Australian 2-4-0 steam locomotives

The Victorian Railways F class was originally a class of 2-4-0 light line passenger locomotives operated by the Victorian Railways between 1874 and 1929.

The Victorian Railways X class was a class of 0-6-0 mainline goods locomotives operated by the Victorian Railways between 1886 and 1920.

The Victorian Railways G class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1904.

The Victorian Railways H class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1916.

<span class="mw-page-title-main">Victorian Railways D class (1887)</span>

The D class of 1887 were Phoenix-built locomotives to be used on Victorian Railways.

The D class of 1876 was the first example of American-built locomotives to be used on Victorian Railways, and among the first such engines to operate in Australia.

The Victorian Railways No. 1 was the first government passenger steam locomotive on Victorian Railways. It was a 2-2-2 passenger locomotive operated by the Victorian Railways between 1858 and 1890 and again between 1893 and 1904, built by George England and Co., Newcastle upon Tyne, England.

The Victorian Railways J class of 1859 was a class of 2-2-2 main line passenger locomotives operated by the Victorian Railways between 1860 and 1912, built by Beyer, Peacock & Company, Manchester, England.

The Victorian Railways P class was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1860 and 1921, built by Beyer, Peacock & Company, Manchester, England.

The Victorian Railways L class was a class of 2-4-0ST passenger locomotives operated by the Victorian Railways between 1861 and 1906, built by both George England and Co., Newcastle upon Tyne, England and Slaughter, Gruning & Co., Bristol, England.

The Geelong & Melbourne Railway Company operated a total of 1 locomotive that fell under the Whyte notation of 0-4-0T, with a Vertical boiler, between 1855 and 1860. Later it was operated by the Victorian Railways between 1860 and 1893. This was the second locomotive manufactured in Australia.

The Geelong and Melbourne Railway Company operated a total of four 2-2-2WT locomotives between 1856 and 1860. They were later operated by the Victorian Railways between 1860 and 1889.

<span class="mw-page-title-main">Victorian Railways O class (1861)</span> Class of Australian 0-6-0 steam locomotives

The Victorian Railways O class was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1862 and 1922, built by various builders.

The Victorian Railways No. 100 was the first government built steam locomotive on Victorian Railways. It was a 2-4-0 passenger locomotive operated by the Victorian Railways between 1872 and 1916, built by Williamstown Workshops.

This was a group of 18 2-4-0WT passenger steam locomotives, built by Robert Stephenson & Company and an extra locomotive built from spare parts supplied with the other 18. These locomotives not only provided the bulk workforce of the early private railway operators in Victoria, but upon their withdrawal they once again proved themselves as useful as contractors locos building some of the railway lines for the then expanding Victorian Railway network.

This was a group of 6 4-4-0WT passenger steam locomotives, built by Robert Stephenson & Company for an early private railway operator in Victoria, and expanded by another 20 locomotives locally built by Robinson Brothers and Phoenix Foundry for the Victorian Railways. They later were known as the Victorian Railways C class.

References

Specific

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1904 ed.). Vic: Victorian Railways. 1904. p. 11.
  2. 1 2 3 4 5 6 7 8 9 10 Cave, Norman; Buckland, John; Beardsell, David (2002). Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. p. 22. ISBN   1876677384.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Cave, Norman; Buckland, John; Beardsell, David (2002). "Chapter 3". Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. ISBN   1876677384.
  4. "George England Locos" . Retrieved 17 November 2014.
  5. Oberg, Leon (2010). Locomotives of Australia 1854–2010 (5th ed.). Dural, NSW: Rosenberg Publishing. p. 17. ISBN   978-1921719011.