Bedar (ship)

Last updated
The original Naga Pelangi, a bedar built in 1981, sailing off Singapore The original Naga Pelangi, bedar, off Singapore, 1981.jpg
The original Naga Pelangi, a bedar built in 1981, sailing off Singapore

The term bedar (spelled "bedor" in Terengganu) is applied to a wide variety of boats of the east coast of Malaysia that carry one or two junk sails and lack the typical transom stern of the perahu pinas . These junk rigged boats are usually built in the Terengganu area. The stern of the bedar is a classical "canu" or "pinky stern," being a typical "double ender", a bit like a modern ship's lifeboat, with a very full turn of the bilge and with markedly raked stem and stern. They came in small versions as small one-masted fishing vessels — anak bedar [1] :112 and 114 (Malay for child bedar) and were built as big as 90 feet over deck (LOD). The majority of the bedars were usually 45 to 60 feet (13.7–18.3 m) over deck. The bedar, like all Terengganu boats, was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as a highly seaworthy traditional sailing vessel.[ citation needed ]

Contents

Etymology

The Malay word bedar means an elongated and flattened beak, broadening towards the tip (i.e. like the bill of a platypus). [2]

Description

The last big sailing bedar, Dapat, (87' / 26.5 m LOD) anchored in Kuala Terengganu in 1980 The bedar DAPAT (L.uo.D. 86 Fuss), heavy laden in 1980.jpg
The last big sailing bedar, Dapat, (87' / 26.5 m LOD) anchored in Kuala Terengganu in 1980

The bedar is a sailing junk that is mainly built in the kuala (English: rivermouth) of the Terengganu River. [3]

The smaller and medium-sized bedars often had a fine slanting projecting prow of various lengths and a short one at the similarly built stern. The bowsprit was resting on top of this forward projection which is called sudu (English: spoon or duck's bill). [4]

The boats equipped with a sudu were referred to as bedar luang sudu (from Malay word sudu: spoon, or sudu itek: duck's bill). [4] The conspicuous sheer (ship) of the bedar varied as well. The smaller ones with a long projection having more sheer and the bigger ones with a short sudu and short sheer. Bedars above 70 feet (21 m) rarely carried a long sudu but featured almost straight stem and stern posts, very much like the bedar Dapat. [5]

The bedar Dapat unloaded in the estuary of Kuala Terengganu, 1980 The Bedar Dapat, off loaded Kuala Terengganu, 1981.jpg
The bedar Dapat unloaded in the estuary of Kuala Terengganu, 1980

Like the pinas, the bedar over 45 feet/13.7 m (LOD), carried two masts, one in the bow, called "topan", slightly raked forward; The main mast, called "agung" was placed a bit forward of the center of the boat. The bedar had a very long bowsprit, slightly bent downwards by the bobstay. [5] Both masts carried a fully battened lug or "junk-sail" of typical Chinese design. These sails were not made of cloth but of a matting material called "tikal" that is also used for floor matting and other purposes. Like most junk sails the battens were made of bamboo, usually creating 6 individual panels to the sail. The halyard was attached almost in the middle of the sail, and since the luff, or edges, of the sail was nearly straight and only about half the length of the markedly convex leech, the yard, when hoisted, was sitting in an angle of about 15° – 20° with the vertical. [5]

The foresail was set on the port side of the topan and the mainsail on the starboard side of the agung. A relatively small jib was set on the bowsprit. All bedars, even those up to or more than 80 feet (24 m) were steered by a tiller with a pulley block system easing the strain on a conventional rudder hinged on the stern post. This tiller was operated from within the round cabin (cup) on the dandan platform over the stern. The hold stored cargo. [5]

The hull of the bedar is influenced by the Arab dhow with their long raked stemposts and the dows often being double ended vessels. [5]

Building technique

Che Ali bin Ngah building the bedar Naga Pelangi on Pulau Duyong, Kuala Terengganu, 1981 Che Ali bin Ngah building the bedar Naga Pelangi, 1981.jpg
Che Ali bin Ngah building the bedar Naga Pelangi on Pulau Duyong, Kuala Terengganu, 1981

The bedar boats of Terengganu are built using indigenous Malaysian techniques to build wooden boats. They build without plans, hull first, frames later. The planks are fire bent and joined edge on edge (carvel) using "basok" (wooden dowels) made from Penagaironwood (Mesua ferrea). Rather than the European style caulking hammered into a groove between the planks, a strip of kulit gelam[ citation needed ] (English: paperbarks skin) [6] of the Melaleuca species is placed over the dowels before the new plank is hammered home. This 1 – 2 mm layer of a natural material has remarkable sealing properties. [5]

History

The tradition of building wooden boats in modern Malaysia reaches far back in time, involving overseas trade, fishing, piracy, travelling up the many rivers. For each purpose they developed a special design. [7]

With Malacca becoming the main trading centre for the spices arriving from the Moluccas Islands (Indonesia), the Malay Peninsula turned into a melting pot of the seafaring, trading civilisations: Indians and Chinese, Arabs and Indonesians, Vietnamese and Thai, Burmese, Europeans and others, they all arrived in their distinctive craft, inspiring the Malay shipbuilding. [7]

The two “Perahu Besar”,[ citation needed ] (English: big boat) [8] of Terengganu, the pinas and the bedar are the result of this cultural interchange. Jib and bowsprit of the two are of western origin, with junks almost never carrying one. [5]

The boatbuilders of Terengganu were rediscovered during the Second World War by the Japanese navy who had wooden minesweepers built there by the carpenters and fishing folks. [7]

There were 5 bedars built for westerners since 1945: [9]

Name of boatBuilders (shipyard)LODYear builtOriginal ownerCountry
Foxy LadyHaji Nik36 ft (11 m)1949DominiqueFrance
Burong BahriChe Man32 ft (9.8 m)1976Jerry WilliamsNew Zealand
Anak DuyongChe Man36 ft (11 m)1980Steven BissetAustralia
Naga PelangiChe Ali bin Ngah45 ft (14 m)1981Christoph SwobodaGermany
Raja LautChe Ali bin Ngah45 ft (14 m)1982Uli HorenkohlGermany

See also

Related Research Articles

<span class="mw-page-title-main">Rig (sailing)</span> Description of the specific ways that a sailing craft is rigged

A sailing vessel's rig is its arrangement of masts, sails and rigging. Examples include a schooner rig, cutter rig, junk rig, etc. A rig may be broadly categorized as "fore-and-aft", "square", or a combination of both. Within the fore-and-aft category there is a variety of triangular and quadrilateral sail shapes. Spars or battens may be used to help shape a given kind of sail. Each rig may be described with a sail plan—formally, a drawing of a vessel, viewed from the side.

<span class="mw-page-title-main">Junk (ship)</span> Traditional Chinese type of boat

A junk is a type of Chinese sailing ship characterized by a central rudder, an overhanging flat transom, watertight bulkheads, and a flat-bottomed design. They are also characteristically built using iron nails and clamps. Chinese junk could refer to one of many types of small coastal or river ships, usually serving as a cargo ship, pleasure boat, or houseboat, but also ranging in size up to large ocean-going vessel. There can be significant regional variations in the type of rig or the layout of the vessel.

<span class="mw-page-title-main">Full-rigged pinnace</span> Type of ship in use in the 16th and 17th centuries

The full-rigged pinnace was the larger of two types of vessel called a pinnace in use from the sixteenth century.

<span class="mw-page-title-main">Redang Island</span> Island in Terengganu, Malaysia

Redang Island is an island in Kuala Nerus District, Terengganu, Malaysia. It is one of the largest islands off the east coast of Peninsular Malaysia and one of the most beautiful islands in the world. It is famous for its crystal clear waters and white sandy beaches. It is one of nine islands, which form a marine sanctuary park offering snorkeling and diving opportunities for tourists.

<span class="mw-page-title-main">Junk rig</span> Type of sail rig used in East Asia

The junk rig, also known as the Chinese lugsail, Chinese balanced lug sail, or sampan rig, is a type of sail rig in which rigid members, called battens, span the full width of the sail and extend the sail forward of the mast. While relatively uncommon in use among modern production sailboats, the rig's advantages of easier use and lower maintenance for blue-water cruisers have been explored by individuals such as trans-Atlantic racer Herbert "Blondie" Hasler and author Annie Hill.

<span class="mw-page-title-main">Pinisi</span> Type of rigging of Indonesian sailing vessels

Literally, the word pinisi refers to a type of rigging of Indonesian sailing vessels. A pinisi carries seven to eight sails on two masts, arranged like a gaff-ketch with what is called 'standing gaffs' — i.e., unlike most Western ships using such a rig, the two main sails are not opened by raising the spars they are attached to, but the sails are 'pulled out' like curtains along the gaffs which are fixed at around the centre of the masts.

<span class="mw-page-title-main">Tongkang</span> Type of small boat in Southeast Asia

Tongkang or "Tong'kang" refers to several type of boats used to carry goods along rivers and shoreline in Maritime Southeast Asia. One of the earliest record of tongkang has a background of 14th century, being mentioned in Malay Annals which was composed no earlier than 17th century. One passage mentioned it as being used by Majapahit empire during the 1350 attack on Singapura.

<span class="mw-page-title-main">Lambo (boat)</span> Two types of traditional boats from Indonesia

The term lambo or lamba refer to two types of traditional boats from Indonesia.

<i>Naga Pelangi</i>

Naga Pelangi is a wooden junk rigged schooner of the Malay pinas type built using traditional lashed-lug techniques from 2004 to 2009 in Kuala Terengganu, Malaysia. Finished in 2010, it is operated as a charter vessel in South East Asia.

<i>Pinas</i> (ship) Pinis

The pinas, sometimes called "pinis" as well, is a type of schooner of the east coast of the Malay peninsula, built in the Terengganu area. This kind of vessel was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as one of the two types of traditional sailing vessels the late Malay maritime culture has developed: The bedar and the pinas.

<span class="mw-page-title-main">Kuala Nerus District</span> District of Malaysia in Terengganu

Kuala Nerus is a district in Terengganu, Malaysia. It is the youngest district in the state, having been declared a separate district in 2014. Formerly it was part of Kuala Terengganu district but the district is still governed by Kuala Terengganu City Council (MBKT) which is one of few city councils in Malaysia to govern two separate districts. Its capital is Kuala Nerus town, other major towns and villages include Gong Badak, Seberang Takir, Batu Rakit and Batu Enam, all which are located within city limits of Kuala Terengganu. Kuala Nerus' population is 226,177 people as of 2015 which makes it the most populous district in Terengganu. The district has a total land area of 397.52 km2.

<span class="mw-page-title-main">Tanja sail</span> Oblique quadrilateral sail from south east Asia

Tanja sail or tanja rig is a type of sail commonly used by the Austronesian people, particularly in Maritime Southeast Asia. It is also known as the tilted square sail, canted rectangular sail, rectangular balance lug, or balance lug sail in English. In historical sources, tanja sail is sometimes incorrectly referred to as lateen sail or simply square sail.

<span class="mw-page-title-main">Padewakang</span> Traditional Indonesian sailing vessel

Padewakangs were traditional boats used by the Bugis, Mandar, and Makassar people of South Sulawesi. Padewakangs were used for long-distance voyages serving the south Sulawesi kingdoms.

<span class="mw-page-title-main">Toop (boat)</span> Type of boat-ship produced in the East Indies

Toop is a type of boat-ship produced in East Indies. Appeared at the end of the 18th century, and built in local shipyards, this type of boat is one of the results of the incorporation of 'Western' and 'Nusantaran' technologies that began in the shipyards of the 17th and 18th European trading companies. This type of boat is commonly used for long-distance shipping. In the first half of the 19th century, this was the most common type of boat used by sailors and traders in Nusantara. Majority of toop is owned by merchants from the western area of Nusantara.

<span class="mw-page-title-main">Janggolan</span> Two different type of boats from Indonesia

Janggolan refers to two different type of perahu from Indonesia. One is from Madura, and the other from Bali. The Madurese janggolan is a type of indigenously constructed boat, meanwhile Balinese janggolan is an indigenous boat with western-styled hull construction.

<span class="mw-page-title-main">Palari (boat)</span> Type of Indonesian sailing vessel from South Sulawesi

Palari is a type of Indonesian sailing vessel from South Sulawesi. It was mainly used by the people of Ara and Lemo Lemo, for transporting goods and people. This vessel is rigged with pinisi rig, which often makes it better known as "Pinisi" instead of its name. In Singapore, palari is known as "Makassartrader".

<span class="mw-page-title-main">Sampan panjang</span>

Sampan panjang was a type of Malay fast boat from the 19th century. It was used especially by the sampan-men, or "Orang Laut". Historically, they can be found in Malaysia, Singapore, and Indonesia. This type of boat was used by Malay people as racing boat and as transport boat. The sampan panjang appeared at the first quarter of the 19th century, and disappeared at the turn of that century. These boats proved to be superior than European boats in racing purposes; they were easy winners when racing against the European yachts of that time.

<span class="mw-page-title-main">Perahu payang</span>

Perahu payang or simply payang is a traditional Malay open fishing boat. They are usually found in Terengganu, and to a lesser extent, Kelantan, Pahang, and Johor coasts. A few examples normally come down to Singapore to operate during the period of the north-east monsoon in the South China Sea.

<span class="mw-page-title-main">Lancang (ship)</span>

A lancang is a type of sailing ship from Maritime Southeast Asia. It is used as warship, lighter, and as royal ship, particularly used by the people of Malay Peninsula, Sumatran east coast, but can also be found in the coast of Kalimantan.

<span class="mw-page-title-main">Austronesian vessels</span> Sailing vessels of Austronesian peoples

Austronesian vessels are the traditional seafaring vessels of the Austronesian peoples of Taiwan, Maritime Southeast Asia, Micronesia, coastal New Guinea, Island Melanesia, Polynesia, and Madagascar. They also include indigenous ethnic minorities in Vietnam, Cambodia, Myanmar, Thailand, Hainan, the Comoros, and the Torres Strait Islands.

References

  1. Gibson-Hill, C. A. (June 1949). "Cargo Boats of the East Coast of Malaya". Journal of the Malayan Branch of the Royal Asiatic Society. 22: 106–125 via JSTOR.
  2. Smyth, H. Warrington (May 1902). "Boats and Boat Building in the Malay Peninsula". Journal of the Society of Arts. 50: 569–588 via JSTOR.
  3. Gibson-Hill (1949). p. 106.
  4. 1 2 Gibson-Hill (1949). p. 113.
  5. 1 2 3 4 5 6 7 Cargo Boats of the East Coast of Malaya, Gibson-Hill, C.A. (1949), JMBRAS 22(3), p. 106-125.
  6. "Google Translate Malay to English - kulit gelam" . Retrieved 2013-11-28.
  7. 1 2 3 Keeping the Tradition of Boatbuilding Alive, Keith Ingram, Magazine: Professional Skipper March/April 2007, p. 70.
  8. "Google Translate Malay to English - Perahu Besar" . Retrieved 2013-11-28.
  9. Boats, Boatbuilding and Fishing in Malaysia, The Malaysian Branch of the Royal Asiatic Society, MBRAS 2009, p. 349-350,