Clearview (typeface)

Last updated
Clearview
Clearview font.svg
Category Sans-serif
Designer(s) Donald Meeker [1]
James Montalbano [1]
Christopher O'Hara [1]
Harriet Spear [1]
Foundry Terminal Design Inc.
License Proprietary
Clearview sample.svg
Sample

Clearview, also known as Clearview Hwy, is the name of a humanist sans-serif typeface family for guide signs used on roads in the United States, Canada, Indonesia, the Philippines, Israel, Brazil and Sri Lanka. It was developed by independent researchers with the help of the Texas A&M Transportation Institute and the Pennsylvania Transportation Institute, under the supervision of the Federal Highway Administration (FHWA). It was once expected to replace the FHWA typefaces in many applications, although newer studies of its effectiveness have called its benefits into question. [1] [2]

Contents

Initial testing indicated that Clearview was 2 to 8 percent more legible in both day- and night-time viewing than the then-dominant Series E (Modified) on overhead signs, particularly benefiting older drivers, with a 6 percent increase in legibility distance. [3] A design goal of Clearview was the reduction of irradiation effects of retroreflective sign materials. [3] Reduced nighttime overglow or haloing was expected also to improve recognition rates for computer road sign detection. [4] However, these tests also compared new signs in Clearview to existing, weathered signs in the existing Highway Gothic font. [5] The new font's apparent legibility "was more due to the fact that older, worn signs were being replaced with nice, fresh, clean signs which were, naturally, more legible." Better testing also revealed that legibility was worse for negative contrast signs (dark lettering on light backgrounds) such as on speed limit and yellow warning signs. [5]

History

A highway sign using Clearview in Farmington Hills, Michigan, near the terminus of westbound I-696 (2005) ClearviewBGS-I696W-I275-I96.JPG
A highway sign using Clearview in Farmington Hills, Michigan, near the terminus of westbound I-696 (2005)

The standard FHWA typefaces, developed in the 1940s, were designed to work with a system of highway signs in which almost all words are capitalized; its standard mixed-case form (Series E Modified) was designed to be most visible under the now-obsolete reflector system of button copy, which has since been superseded by retroreflective sheeting. [6] The designers of Clearview sought to create a typeface adapted for mixed-case signage, initially expecting it would be based on an existing European sans-serif typeface. [7] Instead, using a similar weight to the FHWA fonts, a new font was created from scratch. Two key differences are much larger counter spaces, the enclosed spaces in letters like the lower case "e" or "a", and a higher x-height, the relative height of the lower case "x" to the upper case "X". Smaller counter spaces in the FHWA fonts reduced legibility, particularly when the letters glowed from headlight illumination at night.

Official acceptance

Highway signs in Danville, Virginia, using both Highway Gothic and Clearview fonts (2007) ClearviewVsFHWAfont.jpg
Highway signs in Danville, Virginia, using both Highway Gothic and Clearview fonts (2007)

Clearview was granted interim approval by the FHWA for use on positive-contrast road signs (light legend on dark background, such as white on black, green, blue, brown, purple or red) on September 2, 2004, [8] though not on negative-contrast road signs (dark legend on light background, such as black on white, yellow or orange), given its inferior legibility to the existing FHWA typefaces in these applications. [9] The FHWA also refused to add Clearview to the 2009 MUTCD, citing lack of testing on Clearview's numerals, symbols, and narrower typefaces. [10] In April 2014, FHWA indicated it expected to rescind Interim Approval to use Clearview in the future, [2] eventually doing so in January 2016. [11] [12] Congress ordered the FHWA to reinstate the interim approval on March 28, 2018. [13]

Outside the US, Clearview has been adopted in Canada where it has been the standard typeface for signs in British Columbia since 2006 [14] and used for street signs in Toronto. [15] Clearview has been adopted as the standard typeface for road signs in Indonesia since 2014. [16] Since 2016, Ontario's Ministry of Transportation has started using Clearview on some signs on the Queen Elizabeth Way.

Variants

In addition to its appearance on road signage, a customized version of the ClearviewText typeface was adopted by AT&T for corporate use, including advertising, used from 2006 to 2016. [1] Since 2018, Toyota has used another variant of ClearviewText in its advertisements. ClearviewText and ClearviewADA are versions of the typeface intended for use in general graphic design and ADA-compliant signage. An example of ClearviewADA in use is signage at Dallas/Fort Worth International Airport. [17]

An example of the Clearview typeface. Clearview.png
An example of the Clearview typeface.

Adoption

United States

Between 20 and 30 states have adopted the use of the typeface as of 2013. [18] [19] [20] It was not the official font recommended for use by the FHWA and states were required to request interim approval from the Federal Highway Administration to use the font. [18]

On January 25, 2016, the Federal Highway Administration issued a notice in the Federal Register of the agency's intent to rescind interim approval for use of the Clearview font in 30 days. [11] FHWA discussed the current state of road signage research and concluded that "the consistent finding among all the research evaluations is that the brightness of the retroreflective sheeting is the primary factor in nighttime legibility." [11] Even worse, significant misunderstandings and misapplications of the interim approval for Clearview were resulting in badly designed non-uniform signs that violated the uniformity central to the Manual on Uniform Traffic Control Devices. [11] Accordingly, the notice concluded, "FHWA does not intend to pursue further consideration, development, or support of an alternative letter style." [11] The rescission of the interim approval drew negative response from government officials as well as one of the typeface's designers. [21] [22] [23]

The FHWA reinstated the interim approval on March 28, 2018, [13] per Division L, Title I, Section 125 of the Consolidated Appropriations Act, 2018. [24]

Canada

The Transportation Association of Canada's MUTCD for Canada allows the use of Clearview, and the Ministry of Transportation of Ontario uses it for positive contrast guide signs. [25] The Ontario transportation agency Metrolinx has adopted Clearview for its wayfinding design standard. [26] Toronto has been replacing its black-on-white street signs with newer white-on-blue signs that use Clearview since 2004, with exceptions for certain older neighborhoods. [27] [28] [29] British Columbia has been switching to Clearview for all signage, including regulatory and guide signage.

Indonesia

Highway signs using Clearview in Indonesia Indonesia Road Sign Toll Road exit 3.png
Highway signs using Clearview in Indonesia

The Ministry of Transportation promulgated a regulation in 2014 to introduce new road signs that would use the Clearview typeface. [30] This new regulation was intended to meet ASEAN Economic Community standards starting in 2015. [31] Previously, road signs in Indonesia had traditionally used FHWA Series fonts since 1993. [32]

Philippines

Signage in the Philippines uses Clearview on newer signs. The numbered shields in the Philippine highway network use Clearview.[ citation needed ]

See also

Related Research Articles

<span class="mw-page-title-main">Interstate Highway System</span> Network of freeways in the United States

The Dwight D. Eisenhower National System of Interstate and Defense Highways, commonly known as the Interstate Highway System, or the Eisenhower Interstate System, is a network of controlled-access highways that forms part of the National Highway System in the United States. The system extends throughout the contiguous United States and has routes in Hawaii, Alaska, and Puerto Rico.

<span class="mw-page-title-main">Traffic sign</span> Signboard displaying information for road users

Traffic signs or road signs are signs erected at the side of or above roads to give instructions or provide information to road users. The earliest signs were simple wooden or stone milestones. Later, signs with directional arms were introduced, for example the fingerposts in the United Kingdom and their wooden counterparts in Saxony.

<span class="mw-page-title-main">Bike lane</span> Road traffic lane for cyclists

Bike lanes (US) or cycle lanes (UK) are types of bikeways (cycleways) with lanes on the roadway for cyclists only. In the United Kingdom, an on-road cycle-lane can be firmly restricted to cycles or advisory. In the United States, a designated bicycle lane or class II bikeway (Caltrans) is always marked by a solid white stripe on the pavement and is for 'preferential use' by bicyclists. There is also a class III bicycle route, which has roadside signs suggesting a route for cyclists, and urging sharing the road. A class IV separated bike way (Caltrans) is a bike lane that is physically separate from motor traffic and restricted to bicyclists only.

<i>Manual on Uniform Traffic Control Devices</i> National traffic control manual of the Federal Highway Administration

The Manual on Uniform Traffic Control Devices for Streets and Highways is a document issued by the Federal Highway Administration (FHWA) of the United States Department of Transportation (USDOT) to specify the standards by which traffic signs, road surface markings, and signals are designed, installed, and used. In the United States, all traffic control devices must legally conform to these standards. The manual is used by state and local agencies as well as private construction firms to ensure that the traffic control devices they use conform to the national standard. While some state agencies have developed their own sets of standards, including their own MUTCDs, these must substantially conform to the federal MUTCD.

<span class="mw-page-title-main">Federal Highway Administration</span> US highway transportation agency

The Federal Highway Administration (FHWA) is a division of the United States Department of Transportation that specializes in highway transportation. The agency's major activities are grouped into two programs, the Federal-aid Highway Program and the Federal Lands Highway Program. Its role had previously been performed by the Office of Road Inquiry, Office of Public Roads and the Bureau of Public Roads.

The U.S. Route shield is the highway marker used for United States Numbered Highways. Since the first U.S. Route signs were installed in 1926, the general idea has remained the same, but many changes have been made in the details. Originally, the shield included the name of the state in which the sign was erected and the letters "U S" on a shield-shaped sign. Over time, the shield has been simplified to consist of a white shield outline on a black square background, containing only a black route number. However, because each state is responsible for the production and maintenance of U.S. Route shields, several variants of the shield have existed over the years.

<span class="mw-page-title-main">Yield sign</span> Traffic sign

In road transport, a yield or give way sign indicates that merging drivers must prepare to stop if necessary to let a driver on another approach proceed. A driver who stops or slows down to let another vehicle through has yielded the right of way to that vehicle. In contrast, a stop sign requires each driver to stop completely before proceeding, whether or not other traffic is present. Under the Vienna Convention on Road Signs and Signals, the international standard for the modern sign is an inverted equilateral triangle with a red border and either a white or yellow background. Particular regulations regarding appearance, installation, and compliance with the signs vary by some jurisdiction.

<span class="mw-page-title-main">Street name sign</span> Type of traffic sign used to identify named roads

A street name sign is a type of traffic sign used to identify named roads, generally those that do not qualify as expressways or highways. Street name signs are most often found posted at intersections; sometimes, especially in the United States, in perpendicularly oriented pairs identifying each of the crossing streets.

<span class="mw-page-title-main">Highway Gothic</span> Font commonly used for highway signs

The Standard Alphabets For Traffic Control Devices,, is a sans-serif typeface developed by the United States Federal Highway Administration (FHWA). The font is used for road signage in the United States and many other countries around the world. The typefaces were developed to maximize legibility at a distance and at high speed. The typeface has 6 fonts, from narrow to wider strokes:

<span class="mw-page-title-main">Speed limits in the United States</span>

In the United States, speed limits are set by each state or territory. States have also allowed counties and municipalities to enact typically lower limits. Highway speed limits can range from an urban low of 25 mph (40 km/h) to a rural high of 85 mph (137 km/h). Speed limits are typically posted in increments of five miles per hour (8 km/h). Some states have lower limits for trucks, some also have night and/or minimum speed limits.

<span class="mw-page-title-main">Transport (typeface)</span> Road sign typeface used in the United Kingdom

Transport is a sans serif typeface first designed for road signs in the United Kingdom. It was created between 1957 and 1963 by Jock Kinneir and Margaret Calvert as part of their work as designers for the Department of Transport's Anderson and Worboys committees.

<span class="mw-page-title-main">Interstate (typeface)</span> Sans-serif typeface

Interstate is a digital typeface designed by Tobias Frere-Jones in the period 1993–1999, and licensed by Font Bureau. The typeface is based on Style Type E of the FHWA series of fonts, a signage alphabet drawn for the United States Federal Highway Administration by Dr. Theodore W. Forbes in 1949.

<span class="mw-page-title-main">Radar speed sign</span> Interactive traffic sign

A radar speed sign or speed feedback sign is an interactive sign comprising a speed-measuring device and a message sign generally constructed of a series of LEDs, which displays vehicle speed of approaching motorists. The purpose of radar speed signs is to slow cars down by making drivers aware when they are driving at speeds above the posted limits. They are used as a traffic calming device in addition to or instead of physical devices such as speed bumps and rumble strips.

<span class="mw-page-title-main">HAWK beacon</span> Traffic control device

A HAWK beacon is a traffic control device used to stop road traffic and allow pedestrians to cross safely. It is officially known as a pedestrian hybrid beacon. The purpose of a HAWK beacon is to allow protected pedestrian crossings, stopping vehicular traffic only as needed. The HAWK beacon is a type of traffic control alternative to traffic control signals and/or where an intersection does not meet traffic signal warrants.

James Montalbano is a Brooklyn-based type designer and founder of Terminal Design Inc. He is a past president of the Type Directors Club, and has taught typography and typeface design at Pratt Institute, Parsons The New School for Design, and the School of Visual Arts. He has designed custom fonts for magazines including Glamour and Vanity Fair.

<span class="mw-page-title-main">Logo sign</span> Road sign

Logo signs are blue road signs used on freeways that display the logos or trademarks of businesses before travelers reach an exit or interchange. Typically, a business pays a small fee to a transportation department to have their logos displayed on a large panel alongside other businesses. Depending on the jurisdiction, businesses may have to meet certain criteria such as hours of service and distance from the sign.

<span class="mw-page-title-main">Road signs in Indonesia</span> Overview of road signs in Indonesia

Road signs in Indonesia are standardized road signs similar to those used in other nations but with certain distinctions. As a former Dutch colony, until the 1970s road signs in Indonesia closely followed The Netherlands rules on road signs. Nowadays, Indonesian road sign design are a mix of European, US MUTCD, Australia, New Zealand and Japanese road sign features. According to the 2014 Minister of Transport's Regulation No. 13 concerning Traffic Signs, the official typeface for road signs in Indonesia is Clearview. Indonesia formerly used FHWA Series fonts as the designated typeface though the rules are not being implemented properly.

<span class="mw-page-title-main">Overpass (typeface)</span> Geometric sans-serif typeface

Overpass is a geometric sans-serif digital typeface, derived from Highway Gothic, but instead with a focus on usage as a webfont on digital screens for user interfaces and websites. It was designed by Delve Withrington with Dave Bailey, Thomas Jockin, Alan Dague-Greene, and Aaron Bell between 2011–2021. Overpass comprises 18 variants: 9 font weights and corrected obliques for each weight.

<i>Ohio Manual of Uniform Traffic Control Devices</i> State highway manual

The Ohio Manual of Uniform Traffic Control Devices is the standard for traffic signs, road surface markings, and traffic signals in the U.S. state of Ohio. It is developed by the Ohio Department of Transportation's Office of Roadway Engineering "in substantial conformance to" the national Manual on Uniform Traffic Control Devices developed by the Federal Highway Administration. The first edition of the OMUTCD was published in 1924; the most recent edition was published in 2012. Ohio is one of ten states that publish their own editions of the MUTCD.

This article is a summary of traffic signs used in each country.

References

  1. 1 2 3 4 5 6 Yaffa, Joshua (August 12, 2007). "The Road to Clarity". The New York Times Magazine . Retrieved June 5, 2009.
  2. 1 2 Kehrli, Mark R. "IA-5.31 - Clearview - Grays Harbor County, WA (DENIED)" (PDF). Federal Highway Administration . Retrieved April 25, 2014.
  3. 1 2 Castro, Candida; Horberry, Tim (14 April 2004). The Human Factors of Transport Signs. CRC Press. p. 126. ISBN   978-0-203-45741-2 . Retrieved 18 December 2013.
  4. ↑ Li, Li; Wang, Fei-Yue (24 November 2007). Advanced Motion Control and Sensing for Intelligent Vehicles. Springer. p. 375. ISBN   978-0-387-44409-3 . Retrieved 18 December 2013.
  5. 1 2 "The feds are killing off Clearview, the new highway sign font". The Verge. 4 February 2016. Retrieved 2016-02-05.
  6. ↑ Forbes, Theodore W.; Moskowitz, Karl & Morgan, Glen (1950). "A Comparison of Lower Case and Capital Letters for Highway Signs". Proceedings of the Highway Research Board. pp. 355–373.[ full citation needed ]
  7. ↑ Meeker and Associates / Terminal Design, Inc. ClearviewHWY Research & Design Development. Retrieved on 15 April 2007.
  8. ↑ "Interim Approval for Use of Clearview Font for Positive Contrast Legends on Guide Signs". Federal Highway Administration. 2 September 2004. Retrieved 17 December 2013.
  9. ↑ Evaluation of the Clearview Font for Negative Contrast Traffic Signs (PDF), January 2006
  10. ↑ 74 FR 66740
  11. 1 2 3 4 5 Nadeau, Gregory G. (25 January 2016). "Notice of Termination of Interim Approval IA-5". Federal Register. 81 (15). Office of the Federal Register: 4083–4084. Retrieved 31 January 2016.
  12. ↑ "Keeping drivers safe one road sign at a time | Department of Transportation". www.transportation.gov. Archived from the original on 4 March 2016. Retrieved 12 January 2022.
  13. 1 2 Knopp, Martin C. (March 28, 2018). "Information: MUTCD – Interim Approval for Use of Clearview Font for Positive Contrast Legends on Guide Signs (IA-5)—Reinstatement [HOTO-1]" (PDF). Federal Highway Administration. Retrieved April 15, 2018.
  14. ↑ "New Standards for Sign Fonts (Clearview Type Fonts) and Update to Sheeting reflectivity standards on Guide and Custom Signs (ASTM Type 9/3 and ASTM Type 9/9)" (PDF). Archived from the original (PDF) on 2016-02-05. Retrieved 2013-09-01.
  15. ↑ "Toronto's Gorgeous Old Street Signs Might Soon Be for Sale". CityLab. Retrieved 20 May 2015.
  16. ↑ "About Traffic Signs" (PDF). kemhubri.dephub.go.id. Archived from the original (PDF) on 6 October 2014. Retrieved 30 June 2022.
  17. ↑ "Dallas/Fort Worth International Airport wayfinding". Fonts In Use. January 7, 2016. Retrieved September 26, 2016.
  18. 1 2 Murphy, Matt (26 December 2013). "New font making signs more visible". Charleston Daily Mail . Retrieved 16 January 2014.
  19. ↑ Strizver, Ilene (7 October 2013). Type Rules: The Designer's Guide to Professional Typography. Wiley. p. 20. ISBN   978-1-118-74869-5 . Retrieved 18 December 2013.
  20. ↑ "List of approved requests for interim approval – FHWA MUTCD". Manual on Uniform Traffic Control Devices (MUTCD). Federal Highway Administration, U.S. Department of Transportation. Retrieved 16 January 2014.
  21. ↑ "House Report 114-606" (PDF). United States House of Representatives . 7 June 2016. Retrieved 26 September 2016. FHWA is directed to suspend enforcement of actions terminating the interim approval of this alternate font for highway guide signs until the agency provides an opportunity for public comment on this matter, and documents the safety and cost implications of this decision for affected states. [...]
  22. ↑ "H.R.2029 - To require the Administrator of the Federal Highway Administration to issue a final rule that approves the use of Clearview font for positive contrast legends on guide signs, and for other purposes". Congress.gov (published April 6, 2017). 7 April 2017. Retrieved April 10, 2017.
  23. ↑ Rhodes, Margaret (March 8, 2016). "America's Highway Fonts Got More Drama Than The Bachelor". Wired . Retrieved April 15, 2018.
  24. ↑ "Text - H.R. 1625 - 115th Congress (2017-2018): Consolidated Appropriations Act, 2018 | Congress.gov | Library of Congress". Congress.gov. 23 March 2018. For this fiscal year, the Federal Highway Administration shall reinstate Interim Approval IA–5, relating to the provisional use of an alternative lettering style on certain highway guide signs, as it existed before its termination, as announced in the Federal Register on January 25, 2016 (81 Fed. Reg. 4083).
  25. ↑ "Now you see it! MTO's evolution in traffic signs". Road Talk. Ministry of Transportation of Ontario. Archived from the original on 18 January 2014. Retrieved 16 January 2014.
  26. ↑ Metrolinx (August 30, 2019). Design Standard DS-03 (PDF) (3.4 ed.). Metrolinx. p. 82.
  27. ↑ Holden, Alfred (11 July 2004). "The signs are a-changin; Those familiar street markers are getting a new font and a new look; Words are designed with seniors and drivers in mind" . The Toronto Star (ONT Edition). p. B.03. Retrieved 16 January 2014.
  28. ↑ Spears, John (7 March 2007). "The signs they are a changin'; But not right away, as host of exceptions for older neighbourhoods means many existing street signs are sticking around" . The Toronto Star (MET Edition). p. C.1. Retrieved 16 January 2014.
  29. ↑ Byrnes, Mark (10 May 2013). "Toronto's gorgeous old street signs might soon be for sale". The Atlantic Cities. The Atlantic Monthly Group.
  30. ↑ Ministerial Regulation No. 13/2014 about Traffic Signs. Ministry of Transportation of the Republic of Indonesia. Retrieved 7 February 2015.
  31. ↑ All road signs will be changed to meet ASEAN Standard. SuaraSurabaya. Retrieved 7 February 2015.
  32. ↑ Ministerial Regulation No. 61/1993 about Traffic Signs Archived 2021-02-24 at the Wayback Machine . Ministry of Transportation of the Republic of Indonesia. Retrieved 7 February 2015.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.