Stop sign

Last updated

A stop sign in Australia. This style, a red octagon with the word "Stop" in either English or the national language of that particular region, is used by the greatest number of countries STOP sign.jpg
A stop sign in Australia. This style, a red octagon with the word "Stop" in either English or the national language of that particular region, is used by the greatest number of countries
A circular stop sign in France. The Vienna Convention on Road Signs and Signals still allows this older style Panneau Stop Square Georges Guyon - Maisons-Alfort (FR94) - 2021-03-22 - 1.jpg
A circular stop sign in France. The Vienna Convention on Road Signs and Signals still allows this older style

A stop sign is a traffic sign designed to notify drivers that they must come to a complete stop and make sure the intersection (or railroad crossing) is safely clear of vehicles and pedestrians before continuing past the sign. [1] In many countries, the sign is a red octagon with the word STOP, in either English, the national language of that particular country, or both, displayed in white or yellow. The Vienna Convention on Road Signs and Signals also allows an alternative version: a red circle with a red inverted triangle with either a white or yellow background, and a black or dark blue STOP. Some countries may also use other types, such as Japan's inverted red triangle stop sign. Particular regulations regarding appearance, installation, and compliance with the signs vary by some jurisdictions.

Contents

Design and configuration

The 1968 Vienna Convention on Road Signs and Signals allows for two types of stop signs as well as several acceptable variants. Sign B2a is a red octagon with a white stop legend. The European Annex to the convention also allows the background to be "light yellow". Sign B2b is a red circle with a red inverted triangle with either a white or yellow background, and a black or dark blue stop legend. The Convention allows for the word "STOP" to be in either English or the national language of the particular country. The finalized version by the United Nations Economic and Social Council's Conference on Road Traffic in 1968 (and in force in 1978) proposed standard stop sign diameters of 600, 900 or 1200 mm (24, 36 or 48 inches).

The United Kingdom and New Zealand stop signs are 750, 900 or 1200 mm (about 30, 36 or 48 inches), according to sign location and traffic speeds. [2] [3]

In the United States, stop signs are 30 inches (76 cm) across opposite flats of the red octagon, with a ⁠3/4⁠-inch (2 cm) white border. The white uppercase stop legend is 10 inches (25 cm) tall. [4] [5] Larger signs of 35 inches (89 cm) with 12-inch (30 cm) legend and 1-inch (2.5 cm) border are used on multi-lane expressways. Regulatory provisions exist for extra-large 45-inch (110 cm) signs with 16-inch (41 cm) legend and ⁠1+3/4⁠-inch border for use where sign visibility or reaction distance are limited, and the smallest permissible stop sign size for general usage is 24 inches (61 cm) with an 8-inch (20 cm) legend and ⁠5/8⁠-inch (1.5 cm) border. [6] The metric units specified in the US regulatory manuals are rounded approximations of US customary units, not exact conversions. [5] [7] The field, legend, and border are all retroreflective.

Some modern stop signs have flashing LEDs around the perimeter, which has been shown to substantially reduce crashes. [8]

History

Yellow U.S. 1924-1954 stop sign Yellow stop sign.jpg
Yellow U.S. 1924–1954 stop sign

The first stop sign was created in 1914 [9] by Detroit police sergeant Harold "Harry" Jackson, who was working as a traffic guard at a busy city intersection. One of the cross streets had a particularly low-visibility turn entering the intersection, almost always forcing Sgt. Jackson to slow down and hold back the traffic entering from that street. Looking for ways to make his job easier, he took a rectangular piece of plywood, cut off the corners to give it a distinct shape, wrote "STOP" over the center and placed facing the street. He noticed that his innovation improved the overall traffic flow through the intersection. After he shared his experience with fellow officers at a meeting, the practice started to spread across the city intersections. [10] The next year, 1915, stop signs were adopted across Michigan. [11] [ better source needed ] [12] The first ones had black lettering on a white background and were 24 by 24 inches (61 cm × 61 cm), somewhat smaller than the current sign. As stop signs became more widespread, a rural-dominated committee supported by the American Association of State Highway Officials (AASHO) met in 1922 to standardize them and selected the octagonal shape that has been used in the United States ever since. The unique eight-sided shape of the sign allows drivers facing the back of the sign to identify that oncoming drivers have a stop sign and prevent confusion with other traffic signs. Another consideration of the AASHO was visibility and driver literacy, as summarized in subsequent State Highway Commission reports in the states of the U.S., was that the goal for signs "standardized throughout the Union" was that "The shape of the sign will indicate what it will mean. This has been worked up very carefully by the best-qualified men in the country and men who have made a thorough study of this question. It has been found that so many people have trouble in reading the sign that the shape of the sign is very much more important than the reading matter on it." [13]

The octagon was also chosen so that it could be identified easily at night since the original signs were not reflective.[ citation needed ] The more urban-oriented National Conference on Street and Highway Safety (NCSHS) advocated a smaller red-on-yellow stop sign. [11] These two organizations eventually merged to form the Joint Committee on Uniform Traffic Control Devices, which in 1935 published the first Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD) detailing the stop sign's specifications.

The MUTCD's stop sign specifications were altered eight times between 1935 and 1971. From 1924 to 1954, stop signs bore a red or black stop legend on a yellow field. [11] Yellow was chosen because fade-resistant red materials were not available. [14] [15] Retro-reflective or self-lit signs were permitted in the 1935 MUTCD; retro-reflective ones were first required by the 1948 edition of the MUTCD, which also called for a 2+1/2-foot (0.76-metre) height from the road crown to the bottom of the stop sign. [16] The 1954 MUTCD newly specified a white stop legend on a red field, and increased the mount height specification to 5 feet in rural areas. [11] Red traffic lights signify stop, so the new specification unified red as a stop signal whether given by a sign or a light. The current mounting height of 7 ft (2.13 m) was first specified in 1971. [11]

US mandate, international adoption

The MUTCD stop sign was already widely deployed in the United States when the use of other types of stop signs was eliminated in 1966. [11] In 1968, this sign was adopted by the Vienna Convention on Road Signs and Signals as part of United Nations Economic Commission for Europe's effort to standardize road travel across borders. The Convention specifies that stop be written in English or the national language, and also allows a circular sign with red legend. Forty European countries [17] are party to the convention.

Stop signs around the world

World map of countries' current and historical stop sign shapes: .mw-parser-output .legend{page-break-inside:avoid;break-inside:avoid-column}.mw-parser-output .legend-color{display:inline-block;min-width:1.25em;height:1.25em;line-height:1.25;margin:1px 0;text-align:center;border:1px solid black;background-color:transparent;color:black}.mw-parser-output .legend-text{} Octagonal Historically circular, now octagonal Triangular Historically triangular, now octagonal Circular Unknown World stop sign shapes.svg
World map of countries' current and historical stop sign shapes:
  Octagonal
  Historically circular, now octagonal
  Triangular
  Historically triangular, now octagonal
  Circular
  Unknown
Blue and green stop signs are sometimes used on private property in Hawaii. Blue stop sign - hawaii - oct 2015.jpg
Blue and green stop signs are sometimes used on private property in Hawaii.

The red octagonal field with white English-language stop legend is the most common stop sign used around the world, but it is not universal; Japan uses an inverted solid red triangle, for example, and Zimbabwe until 2016 used a disc bearing a black cross. Moreover, there are many variants of the red-and-white octagonal sign. Although all English-speaking and many other countries use the word stop on stop signs, some jurisdictions use an equivalent word in their primary language instead, or in addition. Also, several languages borrowed the English word "stop" a long time ago, such as French, and therefore do not consider it to be a foreign word any more. The use of native languages is common on U.S. native reservations, especially those promoting language revitalization efforts,[ citation needed ] for example, and Israel uses no word, but rather a pictogram of a hand in a palm-forward "stop" gesture.

Asia

A stop sign in Thailand. Thai Stop Sign.JPG
A stop sign in Thailand.

Countries in Asia generally use a native word, often in a non-Latin script. The sign's shape varies by location, with places such as South Korea, Hong Kong, or Taiwan using the standard octagon shape, with Japan using a triangle. [19]

Europe

Countries in Europe generally have stop signs with the text stop, regardless of local language. There were some objections to this when introduced around the 1970s, but now this is accepted. Turkey (and the unrecognized Turkish Republic of Northern Cyprus ) is a notable exception to this, instead using the Turkish word for stop: "dur".

Latin America

Stop sign in Monterrey, Mexico. Avenida las mitras.jpg
Stop sign in Monterrey, Mexico.

In Spanish and Portuguese-speaking Caribbean and South American countries (Argentina, Bolivia, Brazil, Chile, Colombia, Cuba, Dominican Republic, Ecuador, Paraguay, Peru, Puerto Rico, Uruguay, and Venezuela), signs bear the legend pare ("stop" in Portuguese and Spanish). Mexico and Central American countries bear the legend alto ("halt") instead.

Canada

French stop sign in Quebec City, Quebec, along with a diagram underneath showing who else needs to stop. Stop sign quebec city.jpg
French stop sign in Quebec City, Quebec, along with a diagram underneath showing who else needs to stop.
Bilingual stop sign in Ottawa, Ontario, Canada Bilingualstopsign.jpg
Bilingual stop sign in Ottawa, Ontario, Canada
Bilingual sign (English and Inuktitut) in Nunavut STOP (232020582).jpg
Bilingual sign (English and Inuktitut) in Nunavut

In the Canadian province of Quebec, modern signs read either arrêt or stop. [20] As of 1987, Quebec removed the English stop from its road signs in favor of arrêt. [21] Both stop and arrêt are considered valid French words, with France actually using the word "STOP" on its stop signs, and the Office québécois de la langue française (OQLF) notes that the use of "stop" on stop signs is attested in French since 1927. [22] At the time of the debates surrounding the adoption of the Charter of the French Language ("Bill 101") in 1977, the usage of "stop" was considered to be English and therefore controversial; some signs were occasionally vandalized with red spray paint to turn the word stop into "101". [23] However, it was later officially determined by the OQLF that "stop" is a valid French word in this context, and the older dual arrêt / stop usage is therefore considered redundant and therefore deprecated (à éviter). Newly installed signs thus use only one word, more commonly only arrêt in Québec, while stop is seen in predominantly English-speaking areas. The latter version of stop signs has been disagreed upon by some Quebec residents. [24] Bilingual signs with stop arrêt are still placed in areas of Alberta, New Brunswick and Manitoba; the Acadian regions of Nova Scotia, and Prince Edward Island; on federal property in the National Capital Region; and at all border crossings of the Canada–United States border.[ citation needed ] On First Nations or Inuit territories, stop signs sometimes use the local aboriginal language in addition or instead of English, French, or both, such as Inuktitut notkagit. All other English-speaking areas of Canada use stop.

Other countries

Bilingual Algerian stop sign in Arabic and in English Algerian Stop Sign.jpg
Bilingual Algerian stop sign in Arabic and in English
Stop sign used in Russia to indicate to drivers to stop at the line at traffic lights 030527-2-SaintPetersburg-IMG 0570-2.jpg
Stop sign used in Russia to indicate to drivers to stop at the line at traffic lights
Unofficial sign seen in the Gaeltacht in Ireland. Both stad and stop are Irish words for "stop". Stad Irish stop sign.jpg
Unofficial sign seen in the Gaeltacht in Ireland. Both stad and stop are Irish words for "stop".

The following are some older stop sign designs, used before the Vienna Road Traffic Convention standardized the design:

Application

The use of stop signs varies by country. North America and South Africa use all-way stops in some intersections unlike in some countries where they are legally prohibited. [27] In a majority[ citation needed ] of Central Asian countries, as well as Cuba in North America, junctions without traffic lights or roundabouts are controlled by stop signs on minor roads and by white, yellow and black priority diamond signs on the major road. In Europe and Australia, stop signs are restricted to places where coming to a dead stop is deemed necessary because of severely limited sight lines. At the vast majority of minor intersections in these countries give way signs or equivalent road markings are used, or the intersections are no-priority; roundabouts also work on the give way (rather than stop) principle.

North America

Stop signs are often used in North America to control conflicting traffic movements at intersections that are deemed not busy enough to justify the installation of a traffic signal or roundabout. In the United States, the stop sign is not intended as a traffic calming device, [6] but is meant to be installed mainly for safety or to assign right-of-way. Stop signs may be erected on all intersecting roads, resulting in an all-way stop. [6] Some research has concluded that stop signs do not offer measurable safety benefits over the Yield approach. [28] [29] Other research has concluded that multiway stop signs do not effectively control traffic speeds, and can give rise to negative effects including increased traffic noise and pollution from braking and accelerating vehicles, enforcement problems, and reduced sign compliance. [30]

On school buses

An American school bus displaying front and rear folding stop signs Thomas School Bus Bus.jpg
An American school bus displaying front and rear folding stop signs

A stop sign on a pivoting arm is required equipment on North American school buses. The sign normally stows flat on the left side of the bus, and is deployed by the driver when opening the door for picking up or dropping off passengers. Some buses have two such stop arms, one near the front facing forwards, and one near the rear facing backwards. The stop sign is retroreflective and equipped either with red blinking lights above and below the stop legend or with a legend that is illuminated by LEDs. Unlike a normal stop sign, this sign indicates a two-way absolute stop, requiring other vehicles travelling in both directions to remain stopped until the sign is retracted.[ citation needed ]

Europe

In Europe, stop signs are generally placed at sites where visibility is severely restricted, or where a high crash rate has been noted. In some European countries, stop signs are placed at level crossings to mark the stop line. For most situations, Europe uses the give way sign instead. [31] [32] All-way stops, which are common in North America, are exceedingly rare in Europe. Comparatively, roundabouts and priority to the right intersections are more common.

United Kingdom

In the United Kingdom, stop signs may only be placed at junctions with tramways or sites with severely restricted visibility. [33] Until 2016, each stop sign had to be individually approved by the Secretary of State for Transport. [34] [35] This requirement was removed by the 2016 amendments to the Traffic Signs Regulations and General Directions; [36] [37] the responsibility for approving stop signs now lies with local authorities.

Section 79 of the Highways Act 1980 enables the government to improve visibility at junctions, as by removing or shortening walls or hedges. The Department for Transport considers improving visibility to be preferable to installing a stop sign. [33] The former UK practice of using "Halt" or "Slow" at Major Road Ahead signs was discontinued in 1965 at the recommendation of the Worboys Committee. [38] Instead of replacing all the old halt signs with the new Vienna Convention stop sign, the give way sign became the standard one at UK priority junctions. [39]

Compliance requirements

Laws and regulations regarding how drivers must comply with a stop sign vary by jurisdiction. In the United States and Canada, these rules are set and enforced at the state or provincial level. At a junction where two or more traffic directions are controlled by stop signs, US and Canada practice generally has the driver who arrives and stops first continue first. If two or three drivers in different directions stop simultaneously at a junction controlled by stop signs, generally the drivers on the left must yield the right-of-way to the driver on the far right.

In all countries, the driver must come to a complete stop before passing a stop sign, even if no other vehicle or pedestrian is visible. If a stop line is marked on the pavement, drivers must stop before crossing the line. Slowing but not completely stopping is called a "rolling stop", sometimes nicknamed after a city or region where it is considered endemic (e.g., "Rhode Island roll" or "California stop" [40] ) – slowing down significantly but not stopping completely at the sign. [41] This partial stop is not acceptable to most law enforcement officials, and can result in a traffic citation. However, enforcement of this rule varies widely among countries. The automobile manufacturer Tesla removed a "rolling stop" feature from its self-driving software after the National Highway Traffic Safety Administration complained the practice is unsafe and illegal everywhere in the United States. [42]

In some countries such as Czechia and Russia, stopping is required only at a place where a driver has a sufficient view into the intersection, not at the border of the intersection (where a "STOP" line is not present). Therefore, if multiple drivers come from the same direction and all of them stop at appropriate place, they can continue without stopping again. [43]

Bicyclists

In some jurisdictions, such as the U.S. state of Idaho, the traffic code allows for bicyclists approaching a stop sign to slow down and yield to conflicting traffic, then proceed without stopping unless safety requires a full stop. [44] The Idaho law has been in effect since 1982 and has not been shown to be detrimental to safety. [45] Since 2017, more states have implemented changes to the law similar to Idaho's: Delaware (2017), [46] Oregon (2020), Washington (2020), Utah (2021) and North Dakota (2021). Cyclist advocacy groups have sought similar "Idaho stop" laws for other jurisdictions in the United States. [47] [48] [49]

Disadvantages

Stop sign placement can pose difficulties and hazards in applications where cross traffic is not controlled by a sign or light. Relatively long distance between the stop sign and the crossroad facilitates accurate perception of the speed of approaching cross traffic, but lengthens the time and distance required to enter and clear the junction. Relatively short distance between the stop sign and the crossroad shortens the time required for safe passage through the intersection, but degrades the ability of the stopped driver to accurately perceive the speed of approaching cross traffic. Specifically, drivers approaching an intersection from beyond the subtended angular velocity detection threshold (SAVT) limit may be perceived by a stopped driver as standing still rather than approaching, [50] which means the stopped driver may not make an accurate decision as to whether it is safe to proceed past the stop sign. [51] Whether the distance between the stop sign and the crossroad is officially short or is shortened by drivers creeping past the stop line, they can lose the visual acuity of lateral motion, [52] leaving them to rely on the SAVT. [51] This can make it challenging to accurately estimate the movement of approaching cross traffic. [51] [50] According to recent game-theoretical analysis, at intersections where all directions face stop signs, drivers have strong incentives to run the stop sign. A better solution is to randomly remove one stop sign from all directions, which could lead to significant efficiency gains while ensure safe traffic. [53]

See also

Related Research Articles

<span class="mw-page-title-main">Intersection (road)</span> Road junction where two or more roads either meet or cross at grade

An intersection or an at-grade junction is a junction where two or more roads converge, diverge, meet or cross at the same height, as opposed to an interchange, which uses bridges or tunnels to separate different roads. Major intersections are often delineated by gores and may be classified by road segments, traffic controls and lane design.

<span class="mw-page-title-main">Pedestrian crossing</span> Place designated for pedestrians to cross a road, street or avenue

A pedestrian crossing is a place designated for pedestrians to cross a road, street or avenue. The term "pedestrian crossing" is also used in the Vienna and Geneva Conventions, both of which pertain to road signs and road traffic.

<span class="mw-page-title-main">Traffic light</span> Signaling device to control competing flows of traffic

Traffic lights, traffic signals, or stoplights – also known as robots in South Africa, Zambia, and Namibia – are signaling devices positioned at road intersections, pedestrian crossings, and other locations in order to control the flow of traffic.

<span class="mw-page-title-main">Traffic sign</span> Signboard displaying information for road users

Traffic signs or road signs are signs erected at the side of or above roads to give instructions or provide information to road users. The earliest signs were simple wooden or stone milestones. Later, signs with directional arms were introduced, for example the fingerposts in the United Kingdom and their wooden counterparts in Saxony.

<span class="mw-page-title-main">Traffic warning sign</span> Sign that warns people for a risk or danger

A warning sign is a type of sign which indicates a potential hazard, obstacle, or condition requiring special attention. Some are traffic signs that indicate hazards on roads that may not be readily apparent to a driver.

<i>Manual on Uniform Traffic Control Devices</i> National traffic control manual of the Federal Highway Administration

The Manual on Uniform Traffic Control Devices for Streets and Highways is a document issued by the Federal Highway Administration (FHWA) of the United States Department of Transportation (USDOT) to specify the standards by which traffic signs, road surface markings, and signals are designed, installed, and used. In the United States, all traffic control devices must legally conform to these standards. The manual is used by state and local agencies as well as private construction firms to ensure that the traffic control devices they use conform to the national standard. While some state agencies have developed their own sets of standards, including their own MUTCDs, these must substantially conform to the federal MUTCD.

<span class="mw-page-title-main">Yield sign</span> Traffic sign

In road transport, a give way or yield sign indicates that merging drivers must prepare to stop if necessary to let a driver on another approach proceed. A driver who stops or slows down to let another vehicle through has yielded the right of way to that vehicle. In contrast, a stop sign requires each driver to stop completely before proceeding, whether or not other traffic is present. Under the Vienna Convention on Road Signs and Signals, the international standard for the modern sign is an inverted equilateral triangle with a red border and either a white or yellow background. Particular regulations regarding appearance, installation, and compliance with the signs vary by some jurisdiction.

A reassurance marker or confirming marker is a type of traffic sign that confirms the identity of the route being traveled on. It does not provide information found on other types of road signs, such as distances traveled, distances to other locations or upcoming intersections, as is done by highway location markers.

A regulatory sign is used to indicate or reinforce traffic laws, regulations or requirements which apply either at all times or at specified times or places upon a street or highway, the disregard of which may constitute a violation, or a sign in general that regulates public behavior in places open to the public. The FHWA defines regulatory sign as "a sign that gives notice to road users of traffic laws or regulations".

For driving in the United States, each state and territory has its own traffic code or rules of the road, although most of the rules of the road are similar for the purpose of uniformity, given that all states grant reciprocal driving privileges to each other's licensed drivers. There is also a "Uniform Vehicle Code" which was proposed by a private, non-profit group, based upon input by its members. The UVC was not adopted in its entirety by any state. As with uniform acts in general, some states adopted selected sections as written or with modifications, while others created their own sui generis statutes touching upon the same subject matter. As required by the federal Highway Safety Act of 1966, all states and territories have adopted substantially similar standards for the vast majority of signs, signals, and road surface markings, based upon the Manual on Uniform Traffic Control Devices from the U.S. Department of Transportation. Many of the standard rules of the road involve consistent interpretation of the standard signs, signals, and markings such as what to do when approaching a stop sign, or the driving requirements imposed by a double yellow line on the street or highway. In order to implement their own traffic laws on the property of their own facilities, several federal agencies have also developed their own traffic laws.

<span class="mw-page-title-main">Variations in traffic light operation</span>

In traffic engineering, there are regional and national variations in traffic light operation. This may be in the standard traffic light sequence or by the use of special signals.

<span class="mw-page-title-main">Vienna Convention on Road Signs and Signals</span> 1968 international treaty

The Convention on Road Signs and Signals, commonly known as the Vienna Convention on Road Signs and Signals, is a multilateral treaty to standardize the signing system for road traffic in use internationally.

Traffic sign design involves any tasks in the process of designing traffic signage. Traffic signs may provide information about the law, warn about dangerous conditions and guide roadway users. Traffic signs vary depending upon their use, using different symbols, colors and shapes for easy identification.

<span class="mw-page-title-main">All-way stop</span> Road intersection with stop signs on all approaches

An all-way stop – also known as a four-way stop – is a traffic management system which requires vehicles on all the approaches to a road intersection to stop at the intersection before proceeding through it. Designed for use at low traffic-volume locations, the arrangement is common in the United States, Canada, Mexico, South Africa, and Liberia, as well as in a number of, usually rural, locations in Australia where visibility on the junction approaches is particularly poor. The stop signs at such intersections may be supplemented with additional plates stating the number of approaches.

<span class="mw-page-title-main">Road signs in Japan</span> Overview of road signs in Japan

In Japan, road signs are standardized by the "Order on Road Sign, Road Line, and Road Surface Marking (道路標識、区画線及び道路標示に関する命令)" established in 1968 with origins from the Tokyo Metropolitan Police Department's "Order on Standardization of Road Sign" of 1934 and the Home Ministry of Japan's "Order on Road Signs" of 1942. The previous designs have been used since 1986 after several amendments of order.

Road traffic control devices are markers, signs and signal devices used to inform, guide and control traffic, including pedestrians, motor vehicle drivers and bicyclists. These devices are usually placed adjacent, over or along the highways, roads, traffic facilities and other public areas that require traffic control.

<span class="mw-page-title-main">Comparison of MUTCD-influenced traffic signs</span>

Road signs used by countries in the Americas are significantly influenced by the Manual on Uniform Traffic Control Devices (MUTCD), first released in 1935, reflecting the influence of the United States throughout the region. Other non-American countries using road signs similar to the MUTCD include Australia, Indonesia, Ireland, Japan, Malaysia, New Zealand, and Thailand. They, along with the US Virgin Islands, are also the only countries listed here which drive on the left—with the exception of Liberia and the Philippines, both of which drive on the right.

Road signs in Canada may conform to the Manual of Uniform Traffic Control Devices for Canada (MUTCDC) by the Transportation Association of Canada (TAC) for use by Canadian jurisdictions. Although it serves a similar role to the MUTCD from the US Federal Highway Administration, it has been independently developed and has a number of key differences with its American counterpart, most notably the inclusion of bilingual (English/French) signage for jurisdictions such as New Brunswick with significant anglophone and francophone population, and a heavier reliance on symbols rather than text legends.

This article is a summary of traffic signs used in each country.

<span class="mw-page-title-main">Crosswalks in North America</span>

Crosswalks in the United States and Canada are normally found at intersections, though sometimes may be found mid-block. Crosswalk installations must follow the regulations specified in the Manual on Uniform Traffic Control Devices (MUTCD). At signalized intersections, crosswalks may have pedestrian signals which display symbols to mandate when pedestrians may cross the street.

References

  1. ↑ Vienna Convention on Road Signs and Signals, 1968. United Nations Publication. ISBN   978-92-1-116973-7
  2. ↑ "UK Department of Transport. Traffic Signs Manual, Chapter 3: Regulatory Signs" (PDF). 9 September 2008. Archived from the original (PDF) on 1 June 2010. (2.0 MB)
  3. ↑ New Zealand Transport Agency. Traffic Control Devices Manual: General requirements for traffic signs Archived 17 January 2015 at the Wayback Machine , (963 KB)
  4. ↑ "Standard Highway Signs manual, 2004 Metric edition" (PDF).
  5. 1 2 "Standard Highway Signs manual, 2004 English edition" (PDF). (8.49 MB)
  6. 1 2 3 "Manual on Uniform Traffic Control Devices 2003, Section 2B". Federal Highway Administration (FHWA) . Retrieved 11 March 2012.
  7. ↑ "Standard Highway Signs manual, 2004 Metric edition" (PDF). (8.36 MB)
  8. ↑ Increase Visibility of Stop Signs: LEDs Around Stop Sign Face
  9. ↑ "The Town Crier: Stop! (part 1)". The Daily Citizen. 28 August 2022. Retrieved 8 August 2023.
  10. ↑ Vanderbilt, Tom (25 May 2010). "The quest to design a better stop sign". Slate.
  11. 1 2 3 4 5 6 Signalfan. History of the Stop Sign in America. 1997.
  12. ↑ Greenbaum, Hilary; Rubinstein, Dana (9 December 2011). "The Stop Sign Wasn't Always Red". The New York Times. Retrieved 10 February 2013.
  13. ↑ "Seventeenth and Eighteenth Reports of the State Highway Commission to the Governor of Virginia for the Twenty-one months ending June 30, 1925" (Virginia State Highway Commission, 1925) p.37
  14. ↑ Felton, Ryan (14 October 2017). "Here's Why Stop Signs Are Red". Jalopnik. Gawker Media . Retrieved 16 October 2017.
  15. ↑ Manaul on Uniform Traffic Control Devices (PDF). Department of Commerce. 1954. p. 2. Retrieved 16 October 2017.
  16. ↑ Manual on Uniform Traffic Control Devices. 1948 Edition. Part 1A, Section 31. "[A stop sign] shall be mounted so that its bottom will be 21⁄2 feet above the crown of the roadway."
  17. ↑ "Convention on Road Signs and Signals". United Nations Treaty Collection. United Nations.
  18. ↑ Watanabe, June (20 September 2006). "Malls can erect non-red stop signs". Star-Bulletin. Retrieved 29 December 2020.
  19. ↑ Yoh, Kento; Uchiyama, Chiemi; Hung, Pai-Hsien; Doi, Kenji (1 October 2019). "A video-based approach to promote safe driving among foreign visitors to Japan". IATSS Research. 43 (3): 139–147. doi: 10.1016/j.iatssr.2018.11.004 . S2CID   115443805.
  20. ↑ "Répertoire des dispositifs de signalisation routière du Québec, Transports Québec". Mtqsignalisation.mtq.gouv.qc.ca. Archived from the original on 22 February 2012. Retrieved 11 March 2012.
  21. ↑ "Quebec Calling a Halt To English Stop Sign". The New York Times. 14 May 1982. Retrieved 26 August 2023.
  22. ↑ panneau ARRÊT, Office québécois de la langue française, granddictionnaire.com.
  23. ↑ Photo by Flickr.com user "imagesdistributioncanada"
  24. ↑ "Quebec activists want English stop signs to 'arret'". CTVNews. 16 March 2008. Retrieved 26 August 2023.
  25. ↑ "Catálogo de señales verticales de circulación (Tomo I)" (PDF) (in Spanish). Ministry of the Interior of Spain. Retrieved 1 December 2022.
  26. ↑ "Catálogo de señales verticales de circulación (Tomo II)" (PDF) (in Spanish). Ministry of the Interior of Spain. Retrieved 3 November 2024.
  27. ↑ "Traffic Signs Manual, Chapter 3: Regulatory Signs, Section 3.4" (PDF). UK Department of Transport. 8 September 2008. (2.0 MB)
  28. ↑ Some factors influencing the road behaviour of vehicle drivers. R.J. Smeed, UK Road Research Laboratory. Operational Research Quarterly, Journal of the Operational Research Society, Birmingham, England, 1952.
  29. ↑ "Driver behaviour and accident records at unsignalized urban intersections". Abishai Polusa, Department of Civil Engineering & Transportation Research Institute, Technion-Israel Institute of Technology, Haifa 32000, Israel. June 1984. Available online 4 July 2002.
  30. ↑ Bretherton, M. "Multi-Way Stops—The MUTCD Is Correct!" 1999 ITE Compendium of Technical Papers. Institute of Transportation Engineers, August 1999.
  31. ↑ "Here's Why There Isn't a Single Stop Sign in Paris". 1 October 2020.
  32. ↑ "Dutch Traffic: Why the stop sign is so rare in the Netherlands". Dutch Language Blog | Language and Culture of the Dutch-Speaking World. 28 June 2018.
  33. 1 2 "Chapter 3: Regulatory Signs". Traffic Signs Manual (PDF). London: TSO. 2019. p. 18. ISBN   978-0-11-553223-8 . Retrieved 27 April 2020.
  34. ↑ UK Department of Transport. Traffic Signs Manual, Chapter 3: Regulatory Signs, Section 3.2, 9 September 2008
  35. ↑ "The Traffic Signs Regulations and General Directions 2002". www.legislation.gov.uk. Retrieved 27 April 2020.
  36. ↑ "Annex A". DfT Circular: The Traffic Signs Regulations and General Directions 2016 (PDF). 2016. p. 76. Retrieved 27 April 2020.
  37. ↑ "The Traffic Signs Regulations and General Directions 2016". www.legislation.gov.uk. Retrieved 27 April 2020.
  38. ↑ Great Britain. Report of the Traffic Signs Committee [Chairman, Sir Walter Worboys], 18 April 1963.
  39. ↑ "New traffic signs demonstrated on road at Birmingham." The Surveyor and Municipal Engineer, vol 122, p880, 1963.
  40. ↑ Rosenberg, Mike (30 September 2010). "Cheaper fines for right turn on red? No way, governor says". San Jose Mercury News. Retrieved 30 September 2010.
  41. ↑ "Dictionary.com definition". Dictionary.reference.com. Retrieved 11 March 2012.
  42. ↑ "Tesla recalls autos over software that allows them to roll through stop signs". NPR . Archived from the original on 10 May 2023.
  43. ↑ "Musím na stopce zastavit za dalším vozidlem? :: Autoškola Příkaský". www.autoskolaprikasky.cz. Archived from the original on 27 September 2020. Retrieved 31 July 2020.
  44. ↑ "Bicycle-related Idaho Code" (PDF). Idaho Vehicle Code Title 49, Chapter 7. Idaho Transportation Department. Retrieved 7 February 2013.
  45. ↑ "Bike Law University: Idaho Stop". The League of American Bicyclists. 22 August 2013.
  46. ↑ "Delaware Code Online". delcode.delaware.gov. Retrieved 23 March 2021.
  47. ↑ Maus, Jonathan (15 January 2009). "Exclusive: BTA will go for "Idaho style" stop sign law". BikePortland.org. Retrieved 7 February 2013.
  48. ↑ "Idaho-style STOP law". San Francisco Bicycle Coalition. Retrieved 7 February 2013.
  49. ↑ Cano, Ricardo (18 September 2021). "California cyclists could treat stop signs as yields if 'Idaho Stop' bill becomes law". San Francisco Chronicle. Retrieved 19 March 2022.
  50. 1 2 Hershel Weinberger (19 February 1971). "Conjecture on the Visual Estimation of Relative Radial Motion". Nature . 229 (5286): 562. Bibcode:1971Natur.229..562W. doi: 10.1038/229562a0 . PMID   4925353. S2CID   4290244.
  51. 1 2 3 Michael E. Maddox; Aaron Kiefer (September 2012). "Looming Threshold Limits and Their Use in Forensic Practice". Proceedings of the Human Factors and Ergonomics Society Annual Meeting. 50 (1): 700–704. doi:10.1177/1071181312561146. S2CID   109898296.
  52. ↑ Joseph S. Lappin; Duje Tadin; Jeffrey B. Nyquist; Anne L. Corn (January 2009). "Spatial and temporal limits of motion perception across variations in speed, eccentricity, and low vision". Journal of Vision. 9 (30): 30.1–14. doi: 10.1167/9.1.30 . PMID   19271900. Displacement thresholds for peripheral motion were affected by acuity limits for speeds below 0.5 degrees/s.
  53. ↑ Li, Jiasun (14 September 2022). "Four-Way Stops". Rochester, NY. SSRN   4197885.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.