Mastcam-Z

Last updated
Mastcam-Z
Mastcam-Z Flight Cameras.jpg
Mastcam-Z cameras
Operator Malin Space Science Systems
Manufacturer Malin Space Science Systems
Instrument typeMultispectral sensors
FunctionLocal geomorphology, chemistry, navigation
Properties
Mass1.38 kg (per camera)
Dimensions11cm × 12cm × 26cm (per camera)
Power consumption7.5 W standby and 11.8 W imaging (per camera)
Resolution1600 × 1200 photoactive pixels (1648 × 1214 total)
Spectral bandvaries
Host spacecraft
Spacecraft Perseverance rover
Operator NASA
Launch date30 July 2020
RocketAtlas V 541
Launch siteCape Canaveral SLC-41
COSPAR ID 2020-052A

Mastcam-Z is a multispectral, stereoscopic imaging instrument. It serves as the primary science camera on NASA's Perseverance rover. The Principal Investigator is Jim Bell of Arizona State University. [1] The instrument was designed and built by Malin Space Science Systems in San Diego, California.

Contents

Objectives

There are three main science objectives: [2]

There are four mission objectives:

Design and capabilities

Mastcam-Z engineering diagram Mastcam-z-lens-packaging-diagram-labeled-full.jpg
Mastcam-Z engineering diagram

Mastcam-Z consists of two zoom cameras mounted on the remote sensing mast of the Perseverance rover. The design is an evolution of the Mastcam instrument provided for the previous Mars rover, Curiosity. They share the same detectors, electronics interface, firmware, and operations protocols. Mastcam-Z adds a 3.6:1 zoom capability, whereas the Mastcam has two fixed focal lengths. Each of the zoom cameras has a broadband red/green/blue (RGB) imaging and narrow-band visible/near-infrared (VNIR) color imaging. The sensor consists of an ON Semiconductor KAI-2020CM CCD with an array size of 1600 x 1200 pixels and can image fields of view (FOV) from ~ 5° to ~ 15°. [4] [5] This is an approximately equivalent field of view to that which a 135-400mm zoom lens provides on a standard 35mm consumer camera.

The Mastcam-Z team consists of approximately 100 scientists, engineers, technicians, managers, administrators, and students, many of whom have worked on the project since NASA selected the instrument in 2014. [6]

Calibration targets

Mastcam-Z's Color Calibration Targets (lower right) as seen on Mars Mastcam-Z Looks at Its Calibration Target.jpg
Mastcam-Z's Color Calibration Targets (lower right) as seen on Mars

In order to accurately represent and analyze images of the martian surface, the Perseverance rover carries two swatches of known colors. Mastcam-Z frequently images these calibration targets to gauge the proper color balance and reflectance properties of its targets. [7]

The primary "caltarget" includes ceramic grayscale and color references with known reflectance, magnets to repel dust, and a shadow-post (Gnomon). Seven vignettes between each ceramic color disk represent the inner Solar System and the evolution of life on Earth, human figures, and a stylized space rocket. The vignettes were created by the Mastcam-Z team and The Planetary Society, and approved by NASA. The base plate is inscribed with the message "TWO WORLDS, ONE BEGINNING". Also included is the following message, written in English, Mandarin, Hindi, Spanish, and Arabic: [8]

Are we alone? We came here to look for signs of life, and to collect samples of Mars for study on Earth. To those who follow, we wish a safe journey and the joy of discovery.

A secondary color calibration target is located nearby and is mounted vertically in order to avoid collecting dust from the Martian atmosphere and to provide cross-correlation measurements with the primary caltarget.

Education and public outreach

Mars Perseverance rover - MastCam-Z - Creation of 360-Panorama Image (4 March 2021) PIA24445-MarsPerseveranceRover-MastCam-PanoramaImage-20210304.jpg
Mars Perseverance rover - MastCam-Z - Creation of 360-Panorama Image (4 March 2021)

The Mastcam-Z science and engineering group teamed up with the Planetary Society of Pasadena, California, to provide public education and outreach. All raw Mastcam-Z images will be published to the web within minutes of downlink to Earth. [9]

Related Research Articles

<i>Mars Pathfinder</i> Mission including first robotic rover to operate on Mars (1997)

Mars Pathfinder is an American robotic spacecraft that landed a base station with a roving probe on Mars in 1997. It consisted of a lander, renamed the Carl Sagan Memorial Station, and a lightweight, 10.6 kg (23 lb) wheeled robotic Mars rover named Sojourner, the first rover to operate outside the Earth–Moon system.

<i>Spirit</i> (rover) NASA Mars rover, active from 2004 to 2010

Spirit, also known as MER-A or MER-2, is a Mars robotic rover, active from 2004 to 2010. Spirit was operational on Mars for 2208 sols or 3.3 Martian years. It was one of two rovers of NASA's Mars Exploration Rover Mission managed by the Jet Propulsion Laboratory (JPL). Spirit landed successfully within the impact crater Gusev on Mars at 04:35 Ground UTC on January 4, 2004, three weeks before its twin, Opportunity (MER-B), which landed on the other side of the planet. Its name was chosen through a NASA-sponsored student essay competition. The rover got stuck in a "sand trap" in late 2009 at an angle that hampered recharging of its batteries; its last communication with Earth was on March 22, 2010.

<span class="mw-page-title-main">Mars rover</span> Robotic vehicle for Mars surface exploration

A Mars rover is a remote-controlled motor vehicle designed to travel on the surface of Mars. Rovers have several advantages over stationary landers: they examine more territory, they can be directed to interesting features, they can place themselves in sunny positions to weather winter months, and they can advance the knowledge of how to perform very remote robotic vehicle control. They serve a different purpose than orbital spacecraft like Mars Reconnaissance Orbiter. A more recent development is the Mars helicopter.

<span class="mw-page-title-main">Mars Science Laboratory</span> Robotic mission that deployed the Curiosity rover to Mars in 2012

Mars Science Laboratory (MSL) is a robotic space probe mission to Mars launched by NASA on November 26, 2011, which successfully landed Curiosity, a Mars rover, in Gale Crater on August 6, 2012. The overall objectives include investigating Mars' habitability, studying its climate and geology, and collecting data for a human mission to Mars. The rover carries a variety of scientific instruments designed by an international team.

<span class="mw-page-title-main">Malin Space Science Systems</span> Private technology company

Malin Space Science Systems (MSSS) is a San Diego, California-based private technology company that designs, develops, and operates instruments and technical equipment to fly on uncrewed spacecraft. MSSS is headed by chief scientist and CEO Michael C. Malin.

<span class="mw-page-title-main">HiRISE</span> Camera on board the Mars Reconnaissance Orbiter

High Resolution Imaging Science Experiment is a camera on board the Mars Reconnaissance Orbiter which has been orbiting and studying Mars since 2006. The 65 kg (143 lb), US$40 million instrument was built under the direction of the University of Arizona's Lunar and Planetary Laboratory by Ball Aerospace & Technologies Corp. It consists of a 0.5 m (19.7 in) aperture reflecting telescope, the largest so far of any deep space mission, which allows it to take pictures of Mars with resolutions of 0.3 m/pixel, resolving objects below a meter across.

<span class="mw-page-title-main">James F. Bell III</span> American astronomer

James F. Bell III is a professor of Astronomy at Arizona State University, specializing in the study of planetary geology, geochemistry and mineralogy using data obtained from telescopes and from various spacecraft missions. Bell's active research has involved the NASA Mars Pathfinder, Near Earth Asteroid Rendezvous (NEAR), Comet Nucleus Tour (CONTOUR), 2001 Mars Odyssey, Mars Reconnaissance Orbiter, Lunar Reconnaissance Orbiter, and the Mars Science Laboratory missions. His book Postcards from Mars includes many images taken by the Mars rovers. Bell is currently an editor of the space science journal Icarus and president of The Planetary Society. He has served as the lead scientist in charge of the Panoramic camera (Pancam) color imaging system on Mars rovers Spirit and Opportunity.

<span class="mw-page-title-main">MAVEN</span> NASA Mars orbiter

MAVEN is a NASA spacecraft orbiting Mars to study the loss of that planet's atmospheric gases to space, providing insight into the history of the planet's climate and water. The name is an acronym for "Mars Atmosphere and Volatile Evolution" while the word maven also denotes "a person who has special knowledge or experience; an expert". MAVEN was launched on an Atlas V rocket from Cape Canaveral Air Force Station, Florida, on 18 November 2013 UTC and went into orbit around Mars on 22 September 2014 UTC. The mission is the first by NASA to study the Mars atmosphere. The probe is analyzing the planet's upper atmosphere and ionosphere to examine how and at what rate the solar wind is stripping away volatile compounds.

<span class="mw-page-title-main">Mars Astrobiology Explorer-Cacher</span> Cancelled NASA Mars rover concept

The Mars Astrobiology Explorer-Cacher (MAX-C), also known as Mars 2018 mission, was a NASA concept for a Mars rover mission, proposed to be launched in 2018 together with the European ExoMars rover. The MAX-C rover concept was cancelled in April 2011 due to budget cuts.

<i>Curiosity</i> (rover) NASA robotic rover exploring Gale crater on Mars

Curiosity is a car-sized Mars rover exploring Gale crater and Mount Sharp on Mars as part of NASA's Mars Science Laboratory (MSL) mission. Curiosity was launched from Cape Canaveral (CCAFS) on November 26, 2011, at 15:02:00 UTC and landed on Aeolis Palus inside Gale crater on Mars on August 6, 2012, 05:17:57 UTC. The Bradbury Landing site was less than 2.4 km (1.5 mi) from the center of the rover's touchdown target after a 560 million km (350 million mi) journey.

<i>Sojourner</i> (rover) First NASA Mars rover on Mars Pathfinder mission

Sojourner is a robotic Mars rover that landed in the Ares Vallis channel in the Chryse Planitia region of the Oxia Palus quadrangle on July 4, 1997. Sojourner was operational on Mars for 92 sols. It was the first wheeled vehicle to rove on a planet other than Earth and formed part of the Mars Pathfinder mission.

The PanCam assembly is a set of two wide angle cameras for multi-spectral stereoscopic panoramic imaging, and a high resolution camera for colour imaging that has been designed to search for textural information or shapes that can be related to the presence of microorganisms on Mars. This camera assembly is part of the science payload on board the European Space Agency'sRosalind Franklin rover, tasked to search for biosignatures and biomarkers on Mars. The rover is planned to be launched in August–October 2022 and land on Mars in spring 2023.

<span class="mw-page-title-main">Mars 2020</span> Astrobiology Mars rover mission by NASA

Mars 2020 is a Mars rover mission that includes the rover Perseverance, the small robotic helicopter Ingenuity, and associated delivery systems, as part of NASA's Mars Exploration Program. Mars 2020 was launched from Earth on an Atlas V launch vehicle at 11:50:01 UTC on 30 July 2020, and confirmation of touch down in the Martian crater Jezero was received at 20:55 UTC on 18 February 2021. On 5 March 2021, NASA named the landing site of the rover Octavia E. Butler Landing. As of 8 January 2024, Perseverance and Ingenuity have been on Mars for 1026 sols.

<span class="mw-page-title-main">Chemistry and Camera complex</span> Suite of remote sensing instruments for the Curiosity rover

Chemistry and Camera complex (ChemCam) is a suite of remote sensing instruments on Mars for the Curiosity rover. As the name implies, ChemCam is actually two different instruments combined as one: a laser-induced breakdown spectroscopy (LIBS) and a Remote Micro Imager (RMI) telescope. The purpose of the LIBS instrument is to provide elemental compositions of rock and soil, while the RMI will give ChemCam scientists high-resolution images of the sampling areas of the rocks and soil that LIBS targets. The LIBS instrument can target a rock or soil sample from up to 7 m (23 ft) away, vaporizing a small amount of it with about 30 5-nanosecond pulses from a 1067 nm infrared laser and then observing the spectrum of the light emitted by the vaporized rock.

<span class="mw-page-title-main">Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals</span> Raman spectrometer using an UV laser to determine fine-scale mineralogy and detect organic compounds

Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) is an ultraviolet Raman spectrometer that uses fine-scale imaging and an ultraviolet (UV) laser to determine fine-scale mineralogy, and detect organic compounds designed for the Perseverance rover as part of the Mars 2020 mission. It was constructed at the Jet Propulsion Laboratory with major subsystems being delivered from Malin Space Science Systems and Los Alamos National Laboratory. The Principal Investigator is Luther Beegle, and the Deputy Principal Investigator is Rohit Bhartia.

<i>DAVINCI</i> Planned late-2020s Venus atmospheric probe

DAVINCI is a planned mission for an orbiter and atmospheric probe to the planet Venus. Together with the separate VERITAS mission, which will also study Venus, it was selected by NASA on 2 June 2021 to be part of their Discovery Program. Its acronym is inspired by Leonardo da Vinci in honor of his scientific innovations, aerial sketches and constructions.

<span class="mw-page-title-main">RIMFAX</span>

The Radar Imager for Mars' subsurface experiment (RIMFAX) is a ground-penetrating radar on NASA's Perseverance rover, part of the Mars 2020 mission. It uses radar waves to see geologic features under the surface.

<span class="mw-page-title-main">Moon Diver (spacecraft)</span>

Moon Diver is a proposed lunar mission concept by NASA's Jet Propulsion Laboratory that would employ a robotic lander and a – distant coaxial – two-wheeled rover called Axel to investigate the exposed geological layers on the walls of a deep lunar pit.

<i>Perseverance</i> (rover) NASA Mars rover deployed in 2021

Perseverance, nicknamed Percy, is a car-sized Mars rover designed to explore the Jezero crater on Mars as part of NASA's Mars 2020 mission. It was manufactured by the Jet Propulsion Laboratory and launched on July 30, 2020, at 11:50 UTC. Confirmation that the rover successfully landed on Mars was received on February 18, 2021, at 20:55 UTC. As of 8 January 2024, Perseverance has been active on Mars for 1026 sols since its landing. Following the rover's arrival, NASA named the landing site Octavia E. Butler Landing.

<span class="mw-page-title-main">Timeline of Mars 2020</span> Event timeline of the NASA Mars 2020 mission

The Mars 2020 mission, along with its rover Perseverance and helicopter Ingenuity, was launched from Earth on July 30, 2020. On February 15, 2022, The New York Times provided an overview of the Mars 2020 mission events since the landing in Jezero crater on Mars in February 2021. As of January 8, 2024, Perseverance has been on the planet Mars for 1026 sols.

References

  1. "NASA chooses ASU to design, operate camera system for Mars 2020 mission". ASU News. 31 July 2014. Retrieved 25 August 2015.
  2. Bell, J. F.; et al. (15 February 2021). "The Mars 2020 Perseverance Rover Mast Camera Zoom (Mastcam-Z) Multispectral, Stereoscopic Imaging Investigation". Space Science Reviews. 217 (1): 24. Bibcode:2021SSRv..217...24B. doi: 10.1007/s11214-020-00755-x . ISSN   1572-9672. PMC   7883548 . PMID   33612866.
  3. "Objectives". mars.nasa.gov. Retrieved 7 October 2020.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  4. "Mastcam-Z". Jet Propulsion Lab. Retrieved 25 August 2015.
  5. Bell, J.F. "Mastcam-Z: A Geologic, Stereoscopic, and Multispectral Investigation on the NASA Mars-2020 Rover" (PDF). Archived from the original (PDF) on 26 September 2015. Retrieved 25 August 2015.
  6. "The Team". Mastcam-Z.
  7. Kinch, K. M.; Madsen, M. B.; Bell, J. F.; et al. (3 December 2020). "Radiometric Calibration Targets for the Mastcam-Z Camera on the Mars 2020 Rover Mission". Space Science Reviews. 216 (8): 141. Bibcode:2020SSRv..216..141K. doi: 10.1007/s11214-020-00774-8 . hdl: 10261/234124 . ISSN   1572-9672.
  8. "Mars in Full Color: Calibration targets for the Mastcam-Z Cameras on NASA's Mars 2020 Perseverance rover". Mastcam-Z. Arizona State University. 10 December 2020. Retrieved 24 February 2021.
  9. "Planetary Society Selected as Mars 2020 Camera Partner". Planetary Society. Retrieved 1 September 2015.