Manual telegraph codes
Optical telegraph codes
Prior to the electrical telegraph, a widely used method of building national telegraph networks was the optical telegraph consisting of a chain of towers from which signals could be sent by semaphore or shutters from tower to tower. This was particularly highly developed in France and had its beginnings during the French Revolution. The code used in France was the Chappe code, named after Claude Chappe the inventor. The British Admiralty also used the semaphore telegraph, but with their own code. The British code was necessarily different from that used in France because the British optical telegraph worked in a different way. The Chappe system had moveable arms, as if it were waving flags as in flag semaphore. The British system used an array of shutters that could be opened or closed. [1]
Chappe code
The Chappe system consisted of a large pivoted beam (the regulator) with an arm at each end (the indicators) which pivoted around the regulator on one extremity. The angles these components were allowed to take was limited to multiples of 45° to aid readability. This gave a code space of 8×4×8 code points, but the indicator position inline with the regulator was never used because it was hard to distinguish from the indicator being folded back on top of the regulator, leaving a code space of 7×4×7 = 196. Symbols were always formed with the regulator on either the left- or right-leaning diagonal (oblique) and only accepted as valid when the regulator moved to either the vertical or horizontal position. The left oblique was always used for messages, with the right oblique being used for control of the system. This further reduced the code space to 98, of which either four or six code points (depending on version) were control characters, leaving a code space for text of 94 or 92 respectively.
The Chappe system mostly transmitted messages using a code book with a large number of set words and phrases. It was first used on an experimental chain of towers in 1793 and put into service from Paris to Lille in 1794. The code book used this early is not known for certain, but an unidentified code book in the Paris Postal Museum may have been for the Chappe system. The arrangement of this code in columns of 88 entries led Holzmann & Pehrson to suggest that 88 code points might have been used. However, the proposal in 1793 was for ten code points representing the numerals 0–9, and Bouchet says this system was still in use as late as 1800 (Holzmann & Pehrson put the change at 1795). The code book was revised and simplified in 1795 to speed up transmission. The code was in two divisions, the first division was 94 alphabetic and numeric characters plus some commonly used letter combinations. The second division was a code book of 94 pages with 94 entries on each page. A code point was assigned for each number up to 94. Thus, only two symbols needed to be sent to transmit an entire sentence – the page and line numbers of the code book, compared to four symbols using the ten-symbol code.
In 1799, three additional divisions were added. These had additional words and phrases, geographical places, and names of people. These three divisions required extra symbols to be added in front of the code symbol to identify the correct book. The code was revised again in 1809 and remained stable thereafter. In 1837 a horizontal only coding system was introduced by Gabriel Flocon which did not require the heavy regulator to be moved. Instead, an additional indicator was provided in the centre of the regulator to transmit that element of the code. [2]
Edelcrantz code
The Edelcrantz system was used in Sweden and was the second largest network built after that of France. The telegraph consisted of a set of ten shutters. Nine of these were arranged in a 3×3 matrix. Each column of shutters represented a binary-coded octal digit with a closed shutter representing "1" and the most significant digit at the bottom. Each symbol of telegraph transmission was thus a three-digit octal number. The tenth shutter was an extra-large one at the top. Its meaning was that the codepoint should be preceded by "A".
One use of the "A" shutter was that a numeral codepoint preceded by "A" meant add a zero (multiply by ten) to the digit. Larger numbers could be indicated by following the numeral with the code for hundreds (236), thousands (631) or a combination of these. This required fewer symbols to be transmitted than sending all the zero digits individually. However, the main purpose of the "A" codepoints was for a codebook of predetermined messages, much like the Chappe codebook.
The symbols without "A" were a large set of numerals, letters, common syllables and words to aid code compaction. Around 1809, Edelcrantz introduced a new codebook with 5,120 codepoints, each requiring a two-symbol transmission to identify.
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 003 | 026 | ✗ | 055 | 112 | 125 | 162 | 210 | 254 | ✗ | 274 | 325 | 362 | 422 | 450 | 462 | ✗ | 500 | 530 | 610 |
| U | V | W | X | Y | Z | Å | Ä | Ö | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 00 | 000 |
| 640 | 650 | ✗ | 710 | 711 | 712 | 713 | 723 | 737 | 001 | 002 | 004 | 010 | 020 | 040 | 100 | 200 | 400 | 236 | 631 |
There were many codepoints for error correction (272, error), flow control, and supervisory messages. Usually, messages were expected to be passed all the way down the line, but there were circumstances when individual stations needed to communicate directly, usually for managerial purposes. The most common, and simplest situation was communication between adjacent stations. Codepoints 722 and 227 were used for this purpose, to get the attention of the next station towards, or away from, the sun, respectively. For more remote stations codepoints 557 and 755 respectively were used, followed by the identification of the requesting and target stations. [3]
Wig-wag
Flag signalling was widely used for point-to-point signalling prior to the optical telegraph, but it was difficult to construct a nationwide network with hand-held flags. The much larger mechanical apparatus of the semaphore telegraph towers was needed so that a greater distance between links could be achieved. However, an extensive network with hand-held flags was constructed during the American Civil War. This was the wig-wag system which used the code invented by Albert J. Myer. Some of the towers used were enormous, up to 130 feet, to get a good range. Myer's code required only one flag using a ternary code. That is, each code element consisted of one of three distinct flag positions. However, the alphabetical codepoints required only two positions, the third position only being used in control characters. Using a ternary code in the alphabet would have resulted in shorter messages because fewer elements are required in each codepoint, but a binary system is easier to read at long distance since fewer flag positions need to be distinguished. Myer's manual also describes a ternary-coded alphabet with a fixed length of three elements for each codepoint. [4]
Electrical telegraph codes
Cooke and Wheatstone and other early codes
Many different codes were invented during the early development of the electrical telegraph. Virtually every inventor produced a different code to suit their particular apparatus. The earliest code used commercially on an electrical telegraph was the Cooke and Wheatstone telegraph five needle code (C&W5). This was first used on the Great Western Railway in 1838. C&W5 had the major advantage that the code did not need to be learned by the operator; the letters could be read directly off the display board. However, it had the disadvantage that it required too many wires. A one needle code, C&W1, was developed that required only one wire. C&W1 was widely used in the UK and the British Empire.
Some other countries used C&W1, but it never became an international standard and generally each country developed their own code. In the US, American Morse code was used, whose elements consisted of dots and dashes distinguished from each other by the length of the pulse of current on the telegraph line. This code was used on the telegraph invented by Samuel Morse and Alfred Vail and was first used commercially in 1844. Morse initially had code points only for numerals. He planned that numbers sent over the telegraph would be used as an index to a dictionary with a limited set of words. Vail invented an extended code that included code points for all the letters so that any desired word could be sent. It was Vail's code that became American Morse. In France, the telegraph used the Foy-Breguet telegraph, a two-needle telegraph that displayed the needles in Chappe code, the same code as the French optical telegraph, which was still more widely used than the electrical telegraph in France. To the French, this had the great advantage that they did not need to retrain their operators in a new code. [5]
Standardisation—Morse code
In Germany in 1848, Friedrich Clemens Gerke developed a heavily modified version of American Morse for use on German railways. American Morse had three different lengths of dashes and two different lengths of space between the dots and dashes in a code point. The Gerke code had only one length of dash and all inter-element spaces within a code point were equal. Gerke also created code points for the German umlaut letters, which do not exist in English. Many central European countries belonged to the German-Austrian Telegraph Union. In 1851, the Union decided to adopt a common code across all its countries so that messages could be sent between them without the need for operators to recode them at borders. The Gerke code was adopted for this purpose.
In 1865, a conference in Paris adopted the Gerke code as the international standard, calling it International Morse Code. With some very minor changes, this is the Morse code used today. The Cooke and Wheatstone telegraph needle instruments were capable of using Morse code since dots and dashes could be sent as left and right movements of the needle. By this time, the needle instruments were being made with end stops that made two distinctly different notes as the needle hit them. This enabled the operator to write the message without looking up at the needle which was much more efficient. This was a similar advantage to the Morse telegraph in which the operators could hear the message from the clicking of the relay armature. Nevertheless, after the British telegraph companies were nationalised in 1870 the General Post Office decided to standardise on the Morse telegraph and get rid of the many different systems they had inherited from private companies.
In the US, telegraph companies refused to use International Morse because of the cost of retraining operators. They opposed attempts by the government to make it law. In most other countries, the telegraph was state controlled so the change could simply be mandated. In the US, there was no single entity running the telegraph. Rather, it was a multiplicity of private companies. This resulted in international operators needing to be fluent in both versions of Morse and to recode both incoming and outgoing messages. The US continued to use American Morse on landlines (radiotelegraphy generally used International Morse) and this remained the case until the advent of teleprinters which required entirely different codes and rendered the issue moot. [6]
Transmission speed
The speed of sending in a manual telegraph is limited by the speed the operator can send each code element. Speeds are typically stated in words per minute. Words are not all the same length, so literally counting the words will get a different result depending on message content. Instead, a word is defined as five characters for the purpose of measuring speed, regardless of how many words are actually in the message. Morse code, and many other codes, also do not have the same length of code for each character of the word, again introducing a content-related variable. To overcome this, the speed of the operator repeatedly transmitting a standard word is used. PARIS is classically chosen as this standard because that is the length of an average word in Morse. [7]
In American Morse, the characters are generally shorter than International Morse. This is partly because American Morse uses more dot elements, and partly because the most common dash, the short dash, is shorter than the International Morse dash—two dot elements against three dot elements long. In principle, American Morse will be transmitted faster than International Morse if all other variables are equal. In practice, there are two things that detract from this. Firstly, American Morse, with around five coding elements was harder to get the timings right when sent quickly. Inexperienced operators were apt to send garbled messages, an effect known as hog Morse. The second reason is that American Morse is more prone to intersymbol interference (ISI) because of the larger density of closely spaced dots. This problem was particularly severe on submarine telegraph cables, making American Morse less suitable for international communications. The only solution an operator had immediately to hand to deal with ISI was to slow down the transmission speed. [8]
Language character encodings
Morse code for non-Latin alphabets, such as Cyrillic or Arabic script, is achieved by constructing a character encoding for the alphabet in question using the same, or nearly the same code points as used in the Latin alphabet. Syllabaries, such as Japanese katakana, are also handled this way (Wabun code). The alternative of adding more code points to Morse code for each new character would result in code transmissions being very long in some languages. [9]
Languages that use logograms are more difficult to handle due to the much larger number of characters required. The Chinese telegraph code uses a codebook of around 9,800 characters (7,000 when originally launched in 1871) which are each assigned a four-digit number. It is these numbers that are transmitted, so Chinese Morse code consists entirely of numerals. The numbers must be looked up at the receiving end making this a slow process, but in the era when telegraph was widely used, skilled Chinese telegraphers could recall many thousands of the common codes from memory. The Chinese telegraph code is still used by law enforcement because it is an unambiguous method of recording Chinese names in non-Chinese scripts. [10]
