Victorian Railways J class (1859)

This article is about the 1859 J class steam locomotive. For the 1954 J class steam locomotives, see Victorian Railways J class (1954).

Victorian Railways J class (1859)
Type and origin Power type Steam Builder Beyer, Peacock & Company, Manchester, UK Serial number 110 - 114 Build date 1859 Total produced 5 Rebuild date 1872 Number rebuilt 5
Specifications Configuration: ​  •  Whyte 2-2-2 Rebuilt 1872: 2-4-0 Gauge 5 ft 3 in (1,600 mm) Victorian broad gauge Leading dia. Unknown Rebuilt 1872: 3 ft 1+1⁄2 in (952 mm) [1] Driver dia. 6 ft 0 in (1,830 mm) [2] Rebuilt 1872: 5 ft 0 in (1,520 mm) [1] Trailing dia. Unknown Rebuilt 1872: N/A Tender wheels 3 ft 6 in (1.07 m) [1] Wheelbase 31 ft 4+1⁄2 in (9.563 m) [2] Rebuilt 1872: 33 ft 5+5⁄8 in (10.201 m) [1] 1914 diagram: 31 ft 11+1⁄2 in (9.741 m) [3] ​  • Engine Rebuilt 1872: 15 ft 10 in (4,830 mm) [1]  • Coupled Rebuilt 1872: 7 ft 0 in (2,130 mm) [1]  • Tender 11 ft 0 in (3.35 m) [1] 1914 diagram: 9 ft 0 in (2.74 m) [3] Length: ​  • Over couplers Rebuilt 1872: 42 ft 0+1⁄8 in (12.805 m) [1] 1914 diagram: 40 ft 4 in (12.29 m) [3] Height 13 ft 0 in (3.96 m) [1] Axle load 10  long tons  1 cwt 2 qr (22,570 lb or 10.24 t) [2] 1914 diagram: 10  long tons  5 cwt (23,000 lb or 10.4 t) [3] Loco weight Rebuilt 1872: 27  long tons  3 cwt 1 qr (60,840 lb or 27.6 t) [2] 1914 diagram: 27  long tons  10 cwt (61,600 lb or 27.9 t) [3] Tender weight Rebuilt 1872: 23  long tons  5 cwt 3 qr (52,160 lb or 23.66 t) [2] 1914 diagram: 17  long tons  11 cwt (39,300 lb or 17.8 t) [3] Total weight Rebuilt 1872: 50  long tons  9 cwt (113,000 lb or 51.3 t) [2] 1914 diagram: 45  long tons  1 cwt (100,900 lb or 45.8 t) [3] Fuel capacity 60  long cwt (6,700 lb or 3,000 kg) [1] Water cap. 1,710 imp gal (7,800 L; 2,050 US gal) [1] 1914 diagram: 1,220 imp gal (5,500 L; 1,470 US gal) [3] Firebox: ​  • Grate area 13.00 sq ft (1.208 m2) [2] Boiler pressure Reboilered pre 1896: 2: 120  psi (827  kPa) 4 - 10: 130  psi (896  kPa) Reboilered 1896: 6: 140  psi (965  kPa) Reboilered 1908: 6: 130  psi (896  kPa) Re-rated 1912: 6: 100  psi (689  kPa) Heating surface: ​  • Firebox 77.22 sq ft (7.174 m2) [2]  • Tubes 937.92 sq ft (87.136 m2) [2]  • Total surface 1,015.14 sq ft (94 m2) [2] Cylinders 2, inside Cylinder size 14 in × 21 in (356 mm × 533 mm) [2] 1894 diagram: 15 in × 22 in (381 mm × 559 mm) [2]
Performance figures Tractive effort 1904 diagram - 140psi: 9,240  lbf (41.1  kN) [1] 1914 diagram: 8,580  lbf (38.2  kN) at 100 psi [3]
Career Operators Victorian Railways Number in class 5 Numbers 2-6, 1860: 2-10 (even only) Delivered 1860 First run May 1860 Last run 9 November 1912 (52.5 years) Withdrawn 1904 - 1912 Disposition All scrapped

The Victorian Railways J class of 1859 was a class of 2-2-2 main line passenger locomotives operated by the Victorian Railways between 1860 and 1912, built by Beyer, Peacock & Company, Manchester, England.

History

Victorian Railways initially numbered passenger and goods locomotives separately. The engines were numbered 2–6 (sharing numbers with the V Class goods locomotives). This was changed in the late 1860's to odd numbers for goods locomotives and even numbers for passenger locos with these locomotives taking the even numbers 2–10. ^[4] This odd and even system remained in use until 1912. In 1886, they were allocated to Class J.

Production

The five locomotives were built in 1859 with builder's numbers 110–114 at an average cost of £3774-3-7 for each loco. They arrived in Port Phillip in March 1860. ^[4]

Regular service

J2 was one of the locos used to haul the Victorian Railways Royal Train for Prince Alfred Duke of Edinburgh during his visit in 1867. ^[4]
In 1894, three were allocated to Bendigo and two to Geelong. ^[4]
From 1908, J4 and J6 were used for motor service.

Design improvements

In about 1872, they were rebuilt to 2-4-0 wheel arrangement to improve adhesion and allow greater tractive effort to cope with heavier loads and steeper gradients on the new routes.
Over the years they were fitted with various alterations to the cabs. There were also various upgrades over the years; with constant improvements to safety — these including things like updates to safety valves (and domes), smokeboxs and chimneys (with spark arrestors), and brakes.
At some point before 1894 they were reboilered and the new boiler pressures varied from 120–130psi. ^[4] J6 received another two boilers, the first in 1896, and again in 1908. ^[4] In 1908–09 J4 and J6 were modified for motor service. This involved fitting air brakes and cowcatchers, reducing the size of the tenders (using spare 4 wheel versions from previously scrapped locomotives), and the addition of footplats and handrails on the tenders to allow guards to return to the engine while the train was moving. ^[5]

Accidents

• 11 April 1895 - J4 broke driving wheels at Lancefield ^[4]

Demise

J2 and J8 were withdrawn in 1904. In 1907, the cylinders and frame of J10 were used as a stationary engine at Newport Workshops to drive forging machines. ^[4] J4 sold to Mr Findlay of Serviceton for £700 in 1912. After being withdrawn from service in 1912, J6 was used as a hot water engine until being reported as broken up on 19 February 1916. It reappeared as a hot water engine at Geelong and last reported in a boiler test on 9 March 1917. ^[5]

Fleet summary

Key:	In service	Preserved	Stored or withdrawn	Scrapped

Locomotive	Previous numbers	Builder no.	Entered service	Withdrawn	Scrapped	Status	Notes
J2	2	110	May 1860	23 April 1904		Scrapped	[4]
J4	4	112	July 1860	9 November 1912		Scrapped	Sold to Mr Findlay of Serviceton (£700) - 9 November 1912 [4]
J6	6	114	August 1860	10 August 1912		Scrapped	Hot water engine - 10 August 1912. Broken up? - 19 February 1916. Last seen - 9 March 1917 [4]
J8	3	111	June 1860	5 July 1904		Scrapped	[4]
J10	5	113	July 1860	28 April 1907		Scrapped	Stationary engine at Newport - 29 April 1907 [4]

References

• Dee; et al. (1981). Power Parade. Melbourne: VicRail Public Relations Division. p. 3. ISBN   0-7241-3323-2.
• Cave, Norman; Buckland, John; Beardsell, David (2002). "Chapter 4". Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. pp. 23–33, 35. ISBN   1876677384.

Specific

1. Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1904 ed.). Vic: Victorian Railways. 1904. p. 4.
2. Cave, Norman; Buckland, John; Beardsell, David (2002). Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. p. 35. ISBN   1876677384.
3. Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1914 ed.). Vic: Victorian Railways. 1914. p. 6.
4. Cave, Norman; Buckland, John; Beardsell, David (2002). "Chapter 4". Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. ISBN   1876677384.
5. Cave, Norman; Buckland, John; Beardsell, David (2002). Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. pp. 169–170. ISBN   1876677384.

External links

• J class steam locomotive no. 10, Spencer Street
• VPRS 12903/P0001, 301/02 - Drawing of J class steam locomotive c1860; gls; locomotive; diagrams and drawings
• VPRS 12903/P0001, 301/03 - Drawing of J class steam locomotive c1861; gls; locomotive; diagrams and drawings (as motors)
• VPRS 12903/P0001, 307/05 - J class steam locomotive 2-4-0
• VPRS 12800/P0001, H 3889 - J2 ready for the visit of the Duke of Edinburgh
• VPRS 12800/P0001, H 1092 - J class steam locomotive side view converted to 2-4-0
• VPRS 12800/P0001, H 1714 - J class steam locomotive no. 6 at Birchip 1903
• VPRS 12800/P0001, H 1113 - J class steam locomotive no.6 at Boort perspective view circa early 1880's