Wainscott Windmill | |
Location | Wainscott, East Hampton, New York |
---|---|
Coordinates | 40°56′1″N72°14′16″W / 40.93361°N 72.23778°W |
Built | 1813 |
Architect | Schellinger, Samuel |
MPS | Long Island Wind and Tide Mills TR |
NRHP reference No. | 78001915 [1] |
Added to NRHP | December 27, 1978 |
Wainscott Windmill is an historic windmill on Georgica Association grounds in Wainscott, New York in the Town of East Hampton. Georgica Association grounds are both within Wainscott and the Village of East Hampton to the east. [2] Historically, it is known as one of the most frequently-moved windmills on the east end. It was added to the National Historic Register in 1978.
The windmill was built on Mill Hill in Southampton in 1813, to replace a mill that burned down the previous year.
In 1841 it was purchased by Barney Green, who moved it to another site on the hill bounded by Windmill Lane and Hill Street. In 1858 it was purchased by Cornelius Conklin, who moved it to Wainscott, between Bridgehampton and East Hampton, where it remained for over 50 years. After two further owners, it became the site of the Wainscott Public Library in 1912, with its sails and fantail intact. In 1922, Lathrop Brown purchased the mill and moved it to Montauk, where it was added to the Windmill House (built 1784), a five room a cottage on the cliffs west of the Montauk Lighthouse. [3] In 1942, it was used by the US government as part of the war effort. Later that year, Brown donated it to the Georgica Beach Association, who moved it a final time to Georgica Road in Wainscott. [4] [5]
Since then, much of the machinery has been removed and the structure has been replaced.
It is possible that some of the missing machinery, including the millstones, was removed when the windmill became the Wainscott library. It is also probable that the mill was altered by Lathrop Brown when he moved it to Montauk to be part of his cottage. The roller bearing, cap rack, and cap centering devices were likely removed to allow for firm anchoring of the cap to the mill tower. [5]
When the windmill was moved back to Wainscott in 1943, the mill tower was transported in four sections, of two bays each. During the erection of the tower in Wainscott, one section fell apart. As a result, the mill tower has numerous replaced structural members. [5]
The windmill was winded by a fantail, which may have been original or installed at a later date. Photographs of the mill when the fantail was intact indicate that the components were the same as those of the Beebe and Hayground windmills, with the only difference being that the Wainscott Mill has a starwheel of four sockets instead of eight. The fanstage and starwheel are still in place, but the shaft and pinion are missing. The cap rack has been removed, but a section of it is stored in the mill. [5]
The machinery that remains in the mill includes the windshaft, brake wheel, wallower, great spur wheel, main vertical shaft, stone crane, and regulators. The windshaft may date from when the mill was operated, and there are iron fillets set longitudinally into the neck of the shaft. The compass-arm brake wheel is made of three layers of rear cants bolted together, with the date "March 20 1868" written in pencil on the wheel. The wallower is a clasp-arm spur gear with beveled cogs, unlike that found in any of the other windmills. The stone crane remains in place in the mill, and the worm is stamped "J Conklin." The stone spindles with regulators attached also remain in the mill. [5]
One sign of the mill's comparatively late date of construction, 1813, is the absence of a center post. Instead, the main vertical shaft bears on a bridge beam at the second floor, which is also found in the 1820 Beebe Windmill.< [5]
Upminster Windmill is a Grade II* listed smock mill located in Upminster in the London Borough of Havering, England. It was formerly known as Abraham's Mill and was in Essex when built. It has been restored and is a museum open to the public at selected times.
Great Bircham Windmill is a Grade II listed tower mill in Great Bircham, Norfolk, England.
This glossary of mill machinery covers the major pieces of machinery to be found in windmills, watermills and horse mills. It does not cover machinery found in modern factories.
Beacon Mill is a Grade II listed smock mill in Benenden, Kent, England which is in need of restoration. The mill has been out of use since 1923 and is privately owned.
Edenbridge Mill is a Grade II listed house converted tower mill in Edenbridge, Kent, England. It is on the west side of Mill Hill, just north of the hospital.
Oare Mill is a Grade II listed house converted Tower mill in Oare, Kent, England that was built in the late eighteenth or early nineteenth century.
Blackdown Mill or Cherry Clack Mill is a grade II listed smock mill at Punnetts Town, East Sussex, England, which has been restored.
Barnet Gate Mill or Arkley Windmill is a grade II* listed tower mill at Barnet Gate in the London Borough of Barnet, originally in Hertfordshire. There is no public access.
Beebe Windmill is a historic mill located at the southeast corner of Ocean Road and Hildreth Avenue in Bridgehampton, New York.
Corwith Windmill at Water Mill is a historic mill on NY 27 and Halsey Lane in Southampton, New York.
Debden Windmill is a grade II listed Tower mill at Debden, Essex, England which has been converted to residential use.
Gibraltar Mill is a grade II listed Tower mill at Great Bardfield, Essex, England which has been converted to residential use.
Church End Mill is a grade II listed Tower mill at Great Dunmow, Essex, England which has been converted to residential use.
Stansted Mountfitchet Windmill is a grade II* listed Tower mill at Stansted Mountfitchet, Essex, England which is also a Scheduled Ancient Monument. It has been restored and can turn by wind.
Messing Maypole Mill is a grade II listed Tower mill at Tiptree, Essex, England which has been converted to a residence. Prior to boundary changes made when the civil parish of Tiptree was established in 1934, the mill was in the parish of Tolleshunt Knights.
Gainsford End Mill is a grade II listed tower mill at Gainsford End, near Toppesfield, Essex, England, which has been converted to a residence.
Bardwell Mill is a Grade II* listed tower mill at Bardwell, Suffolk, England, which is under restoration.
Thelnetham Windmill, also known as Button's Mill is a Grade II* listed tower mill constructed of brick. The windmill is located at Thelnetham, Suffolk, England. It was built in the early nineteenth century to grind wheat into flour. Thelnetham windmill worked by wind power until 1924, latterly on two sails, after which it became derelict.
Buttrum's Mill or Trott's Mill is a Grade II listed tower mill at Woodbridge, Suffolk, England which has been restored to working order.
Mill Lane Mill is a Grade II listed tower mill at Carbrooke, Norfolk, England which has been conserved with some machinery remaining.