Fire-control radar

Last updated
United States Navy Fire Controlman (FC), USN rating badge Fc-rate.gif
United States Navy Fire Controlman (FC), USN rating badge

A fire-control radar (FCR) is a radar that is designed specifically to provide information (mainly target azimuth, elevation, range and range rate) to a fire-control system in order to direct weapons such that they hit a target. They are sometimes known as narrow beam radars, [1] targeting radars, tracking radars, or in the UK, gun-laying radars. If the radar is used to guide a missile, it is often known as a target illuminator or illuminator radar.

Contents

A typical fire-control radar emits a narrow, intense beam of radio waves to ensure accurate tracking information and to minimize the chance of losing track of the target. This makes them less suitable for initial detection of the target, and FCRs are often partnered with a medium-range search radar to fill this role. In British terminology, these medium-range systems were known as tactical control radars.

Most modern radars have a track-while-scan capability, enabling them to function simultaneously as both fire-control radar and search radar. This works either by having the radar switch between sweeping the search sector and sending directed pulses at the target to be tracked, or by using a phased-array antenna to generate multiple simultaneous radar beams that both search and track.

Operational phases

Fire-control radars operate in three different phases: [2]

Designation or vectoring phase
The fire-control radar must be directed to the general location of the target due to the radar's narrow beam width. This phase is also called "lighting up". [3] It ends when lock-on is acquired.
Acquisition phase
The fire-control radar switches to the acquisition phase of operation once the radar is in the general vicinity of the target. During this phase, the radar system searches in the designated area in a predetermined search pattern until the target is located or redesignated. This phase terminates when a weapon is launched.
Tracking phase
The fire-control radar enters into the track phase when the target is located. The radar system locks onto the target during this phase. This phase ends when the target is destroyed.

Performance

The performance of a fire-control radar is determined primarily by two factors: radar resolution and atmospheric conditions. Radar resolution is the ability of the radar to differentiate between two targets closely located. The first, and most difficult, is range resolution, finding exactly how far is the target. To do this well, in a basic fire-control radar system, it must send very short pulses. Bearing resolution is typically ensured by using a narrow (one or two degree) beam width. Atmospheric conditions, such as moisture lapse, temperature inversion, and dust particles affect radar performance as well. Moisture lapse and temperature inversion often cause ducting, in which RF energy is bent as it passes through hot and cold layers. This can either extend or shorten the radar horizon, depending on which way the RF is bent. Dust particles, as well as water droplets, cause attenuation of the RF energy, resulting in a loss of effective range. In both cases, a lower pulse repetition frequency makes the radar less susceptible to atmospheric conditions.

Countermeasures

Most fire-control radars have unique characteristics, such as radio frequency, pulse duration, pulse frequency and power. These can assist in identifying the radar, and therefore the weapon system it is controlling. This can provide valuable tactical information, like the maximum range of the weapon, or flaws that can be exploited, to combatants that are listening for these signs. During the Cold War Soviet fire control radars were often named and NATO pilots would be able to identify the threats present by the radar signals they received.

Surface based

One of the first successful fire-control radars, the SCR-584, was used effectively and extensively by the Allies during World War II for anti-aircraft gun laying. Since World War II, the U.S. Army has used radar for directing anti-aircraft missiles including the MIM-23 Hawk, the Nike series and currently the MIM-104 Patriot.

Ship based

Examples of fire-control radars currently in use by the United States Navy:

Aircraft based

After World War II, airborne fire control radars have evolved from the simpler gun and rocket laying AN/APG-36 system used in the F-86D to the active electronically scanned array-based AN/APG-81 of the F-35 Lightning II. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Radar</span> Object detection system using radio waves

Radar is a system that uses radio waves to determine the distance (ranging), direction, and radial velocity of objects relative to the site. It is a radiodetermination method used to detect and track aircraft, ships, spacecraft, guided missiles, motor vehicles, map weather formations, and terrain.

<span class="mw-page-title-main">Phased array</span> Array of antennas creating a steerable beam

In antenna theory, a phased array usually means an electronically scanned array, a computer-controlled array of antennas which creates a beam of radio waves that can be electronically steered to point in different directions without moving the antennas. The general theory of an electromagnetic phased array also finds applications in ultrasonic and medical imaging application and in optics optical phased array.

<span class="mw-page-title-main">Active electronically scanned array</span> Type of phased array radar

An active electronically scanned array (AESA) is a type of phased array antenna, which is a computer-controlled antenna array in which the beam of radio waves can be electronically steered to point in different directions without moving the antenna. In the AESA, each antenna element is connected to a small solid-state transmit/receive module (TRM) under the control of a computer, which performs the functions of a transmitter and/or receiver for the antenna. This contrasts with a passive electronically scanned array (PESA), in which all the antenna elements are connected to a single transmitter and/or receiver through phase shifters under the control of the computer. AESA's main use is in radar, and these are known as active phased array radar (APAR).

<span class="mw-page-title-main">Pulse-Doppler radar</span> Type of radar system

A pulse-Doppler radar is a radar system that determines the range to a target using pulse-timing techniques, and uses the Doppler effect of the returned signal to determine the target object's velocity. It combines the features of pulse radars and continuous-wave radars, which were formerly separate due to the complexity of the electronics.

<span class="mw-page-title-main">Rajendra Radar</span> Fire-control radar

Rajendra is a passive electronically scanned array radar developed by the Defence Research and Development Organisation (DRDO). This acts as the Fire-control radar for Akash weapon system. It is a multifunction radar, capable of surveillance, tracking and engaging low radar cross section targets. It is a ground surveillance radar and is a great source of surveillance operating at frequency around 20 GHz. It is mainly used to track enemy's installations.

The AN/APG-65 and AN/APG-73 are designations for a family of all-weather multimode airborne radar systems designed by Hughes Aircraft for the F/A-18 Hornet, and used on a variety of fighter aircraft types. The APG-79 is an upgraded AESA version.

Monopulse radar is a radar system that uses additional encoding of the radio signal to provide accurate directional information. The name refers to its ability to extract range and direction from a single signal pulse.

The AN/APG-76 radar is a pulse Doppler Ku band multi-mode radar developed and manufactured by Northrop Grumman.

<span class="mw-page-title-main">SCANFAR</span> Phased-array radar system that once saw limited use with the United States Navy

The Hughes SCANFAR was the first phased array radar system to be deployed by the US Navy, installed on the USS Long Beach (CGN-9) and USS Enterprise (CVN-65). It consisted of two search radars, the AN/SPS-32 and the AN/SPS-33. In 1982, the system was removed from Long Beach, and was replaced by the AN/SPS-48 during a comprehensive overhaul. Aboard the Long Beach, the system used AN/SPG-55 radars for missile guidance.

<span class="mw-page-title-main">Passive electronically scanned array</span> Type of antenna

A passive electronically scanned array (PESA), also known as passive phased array, is an antenna in which the beam of radio waves can be electronically steered to point in different directions, in which all the antenna elements are connected to a single transmitter and/or receiver. The largest use of phased arrays is in radars. Most phased array radars in the world are PESA. The civilian microwave landing system uses PESA transmit-only arrays.

<span class="mw-page-title-main">JL-10A</span> Type of aircraft radar

The JL-10A airborne radar is a highly digitized pulse-Doppler radar with slotted planar array developed for the People's Liberation Army Air Force (PLAAF) as a replacement for the older Type 232H radar currently employed by the Chinese air force. The radar is built to MIL-STD-1553 standard so it is compatible with western electronics and weaponry. Originally, the radar is capable of simultaneously tracking 10 targets and engaging 2 of the 10 tracked when using semi-active radar homing air-to-air missiles, or 4 of the 10 tracked when using active radar homing air-to-air missiles.

<span class="mw-page-title-main">Giraffe radar</span> Swedish early warning radar system family

The Saab Giraffe Radar is a family of land and naval two- or three-dimensional G/H-band passive electronically scanned array radar-based surveillance and air defense command and control systems. It is tailored for operations with medium- and Short Range Air Defense (SHORAD) missile or gun systems, or for use as gap-fillers in a larger air defense system.

Radar engineering is the design of technical aspects pertaining to the components of a radar and their ability to detect the return energy from moving scatterers — determining an object's position or obstruction in the environment. This includes field of view in terms of solid angle and maximum unambiguous range and velocity, as well as angular, range and velocity resolution. Radar sensors are classified by application, architecture, radar mode, platform, and propagation window.

Electronics and Radar Development Establishment (LRDE) is a laboratory of the Defence Research & Development Organisation (DRDO), India. Located in C.V. Raman Nagar, Bengaluru, Karnataka, its primary function is research and development of radars and related technologies. It was founded by S. P. Chakravarti, the father of Electronics and Telecommunication engineering in India, who also founded DLRL and DRDL.

The AN/APG-67 is a multi-mode all-digital X band coherent pulse doppler radar originally developed by General Electric for the Northrop F-20 Tigershark program of the early 1980s. It offers a variety of air-to-air, air-to-ground, sea-search and mapping modes, and compatibility with most weapons used by the US Air Force in the 1980s.

<span class="mw-page-title-main">Radar lock-on</span> Feature of a type of military offensive technology

Lock-on is a feature of many radar systems that allow it to automatically follow a selected target. Lock-on was first designed for the AI Mk. IX radar in the UK, where it was known as lock-follow or auto-follow. Its first operational use was in the US ground-based SCR-584 radar, which demonstrated the ability to easily track almost any airborne target, from aircraft to artillery shells.

<span class="mw-page-title-main">AN/APQ-120</span> Aircraft fire control radar

The AN/APQ-120 was an aircraft fire control radar (FCR) manufactured by Westinghouse for the McDonnell Douglas F-4E Phantom II. AN/APQ-120 has a long line of lineage, with its origin traced all the way back to Aero-13 FCR developed by the same company in the early 1950s. A total of half a dozen FCRs were tested and evaluated on the first 18 F-4s built, but they were soon replaced by later radars produced in great numbers, including AN/APQ-120.

<span class="mw-page-title-main">Mark 63 Gun Fire Control System</span> Gun Fire Control System of the United States Navy

Mark 63 Gun Fire Control System is a gun fire-control system made up of AN/SPG-34 radar tracker and the Mark 29 gun sight. They were usually equipped for the control of twin QF 4-inch naval gun Mk XVI and Mk.33 twin 3"/50 cal guns.

<span class="mw-page-title-main">AN/SPG-62</span> U.S. Navy fire-control radar

The AN/SPG-62 is a continuous wave fire-control radar developed by the United States, and it is currently deployed on warships equipped with the Aegis Combat System. It provides terminal target illumination for the semi-active SM-2MR/ER and ESSM Block 1 surface-to-air missiles. It also provides illumination for the active SM-6 if it is used in semi-active mode. The antenna is mechanically steered, uses a parabolic reflector, and operates at 8 to 12 GHz. The system is a component of the Mk 99 fire-control system (FCS).

References

  1. Wragg, David W. (1973). A Dictionary of Aviation (first ed.). Osprey. p. 199. ISBN   9780850451634.
  2. Donald J. Povejsil (1965). Airborne Radar. Boston Technical Publishers. p. 101. ISBN   9780598816276 . Retrieved 2009-02-10.
  3. Peter Symonds (26 September 2016). "Japan scrambles fighter to intercept Chinese military aircraft". WSWS. Archived from the original on Dec 5, 2023.
  4. "AN/APG-81 Active Electronically Scanned Array (AESA) Fire Control Radar". Northrop Grumman. Archived from the original on Jan 11, 2024.