This article includes a list of general references, but it lacks sufficient corresponding inline citations .(February 2012) |
The obsolete units of measurement of German-speaking countries consist of a variety of units, with varying local standard definitions. Some of these units are still used in everyday speech and even in stores and on street markets as shorthand for similar amounts in the metric system. For example, some customers ask for one pound (ein Pfund) of something when they want 500 grams.
The metric system became compulsory on 1 January 1872, in Germany and on 1 January 1876, in Austria. [1]
Some obsolete German units have names similar to units that were traditionally used in other countries, and that are still used in a limited number of cases in the United Kingdom (imperial units) and fully in the United States (United States customary units).
Before the introduction of the metric system in German, almost every town had its own definitions of the units shown below. Often towns posted local definitions on a wall of the city hall. For example, the front wall of the old city hall of Rudolstadt (still standing) has two marks which show the “Rudolstädter Elle”, the proper length of the Elle in that city. Supposedly by 1810 there were 112 different standards for the Elle around Germany. [ citation needed ]
“...the measure of cloth, for example, was elle which in each region stood for a different length. An elle of textile material brought in Frankfurt would get you 54.7 cm of cloth, in Mainz 55.1 cm, in Nuremberg 65.6 cm, in Freiburg 53.5 cm...”
A German geographic mile (geographische Meile) is defined as 1⁄15 equatorial degrees, equal to 7,420.54 m (24,345.6 ft ). A common German mile, land mile, or post mile (Gemeine deutsche Meile, Landmeile, Postmeile) was defined in various ways at different places and different times. After the introduction of the metric system in the 19th century, the Landmeile was generally fixed at 7,500 m (24,606 ft) (the Reichsmeile), but before then there were many local and regional variants (of which some are shown below):
Some kinds of Meile | ||
---|---|---|
Place | Distance in metres (feet) | Notes |
Breslau (Wrocław) | 6,700 m (22,000 ft) | Used in all Silesia [2] [3] |
Bavaria (Bayern) | 7,415 m (24,327 ft) | Connected to a 1⁄15 equatorial degree as 25,406 Bavarian feet. |
Württemberg | 7,449 m (24,439 ft) | |
Reichsmeile | 7.5 km (4.7 mi) 7,500 m (24,606 ft) | 'imperial mile' – New mile when the metric system was introduced. Prohibited by law in 1908. |
Anhalt | 7,532 m (24,711 ft) | |
Denmark, Prussia | 7,532 m (24,711 ft) | 24,000 Prussian feet. Also known as "(Dänische/Preußische) Landmeile". In 1816, king Frederick William III of Prussia adopted the Danish mile at 7,532 m (24,711 ft), or 24,000 Prussian feet. |
Saxony (Sachsen) | 7,500 m (24,606 ft) | In the 17th–18th century or so, 9,062 m (29,731 ft) = 32,000 (Saxon) feet; later 7,500 m (24,606 ft) (as in Prussia and the rest of Germany). |
Schleswig-Holstein | 8,803 m (28,881 ft) | |
Baden | 8,000 m (26,247 ft) | 8889 m before 1810, 8,944 m (29,344 ft) before 1871 |
Hesse-Kassel | 9,206 m (30,203 ft) | |
Lippe-Detmold | 9,264 m (30,394 ft) | |
Saxony (Sachsen) | 9,062 m (29,731 ft) | 32,000 (Saxon) feet (in the 19th century 7,500 m or 24,606 ft see above). |
Westfalia (Westfalen) | 11,100 m (36,417 ft) | but also 9,250 m (30,348 ft) |
Oldenburg | 9,894 m (32,461 ft) | |
Rhineland (Rheinland) | 4,119 m (13,514 ft) | |
Palatinate (Pfalz) | 4,630 m (15,190 ft) | |
Osnabrück/France | 5,160 m (16,929 ft) | |
Wiesbaden | 1,000 m (3,281 ft) |
One hour's travel, used up to the 19th century. In Germany 1⁄2 Meile or 3.71 km (2.31 mi ). After 1722 in Saxony 1⁄2 post mile = 1000 Dresden rods = 4531 m. [4] In Switzerland 16,000 ft or 4.88 km.
The Fuß or German foot varied widely from place to place in the German-speaking world, and also with time. In some places, more than one type of Fuß was in use. One source from 1830 [5] gives the following values:
Some kinds of Fuß | |||
---|---|---|---|
Place | Name | Local equivalent | International (English) equivalents |
Aachen (Aix-la-Chapelle) | Feldmaßfuß | 1⁄6 Klafter | 282 mm (11.10 in ) |
Aachen | Baufuß | 1⁄16 Ruthe | 288 mm (11.34 in) |
Aargau, Canton of | Fuß | 300 mm (11.81 in) | |
Aichstadt, Bavaria | old Fuß | 307 mm (12.09 in) | |
Altona, Holstein | Fuß | 286 mm (11.26 in) | |
Anspach, Bavaria | Werkfuß | 299 mm (11.77 in) | |
Appenzell, Canton of | Fuß | 313 mm (12.32 in) | |
Aschaffenberg, Bavaria | Fuß | 288 mm (11.34 in) | |
Augsburg, Bavaria | Werkschuh | 296 mm (11.65 in) | |
Baden | Reichsfuß | 10 Zoll, 1⁄10 Ruthe | 300 mm (11.81 in) |
Baireuth, Bavaria | Fuß | 298 mm (11.73 in) | |
Bamberg, Bavaria | Fuß | 303 mm (11.93 in) | |
Basel, Canton of | Stadtschuh | 304 mm (11.97 in) | |
Bavaria | Fuß | 292 mm (11.50 in) | |
Bergamo, Austria | Fuß | 1⁄6 Cavezzo | 435 mm (17.13 in) |
Berlin | Prussian Reichsfuß | 313.8536 mm (12.36 in) [6] | |
Bern, Canton of | gewöhnlicher Fuß | 12 Zoll | 298 mm (11.73 in) |
Bern, Canton of | Steinbrecherfuß | 13 Zoll | 317 mm (12.48 in) |
Bohemia | Fuß or Stopa | 296 mm (11.65 in) | |
Bozen, Austria | Tyroler-Fuß | 334 mm (13.15 in) | |
Braunschweig (Brunswick) | Fuß | 1⁄16 Ruthe | 285 mm (11.22 in) |
Bremen | Fuß | 1⁄16 Ruthe | 289 mm (11.38 in) |
Breslau | old Silesian Fuß | 1⁄16 Ruthe | 283 mm (11.14 in) |
Bünden, Canton of | churischer Fuß | 322 mm (12.68 in) | |
Calenberg Land | Fuß | 1⁄16 Ruthe | 292 mm (11.50 in) |
Carlsruhe (as Baden) | Fuß | 300 mm (11.81 in) | |
Cassel, Hessen | Fuß | 1⁄14 Ruthe | 287 mm (11.30 in) |
Cleve, Prussia | Fuß | 295 mm (11.61 in) | |
Cöln am Rhein (Cologne), Prussia | Fuß | 287 mm (11.30 in) | |
Cremona, Austria | old Fuß | 480 mm (18.90 in) | |
Danzig, Prussia | old Fuß | 1⁄2 Elle | 287 mm (11.30 in) |
Darmstadt | Hessian Reichsfuß | 10 Zoll | 250 mm (9.84 in) |
Darmstadt | old Darmstadt Fuß | 12 Zoll | 288 mm (11.34 in) |
Dordrecht, Netherlands | Fuß | 361 mm (14.21 in) | |
Dresden, Saxony | Fuß | 260 mm (10.24 in) | |
Duderstadt, Hanover | Fuß | 290 mm (11.42 in) | |
Durlach (as Baden) | Fuß | 300 mm (11.81 in) | |
Durlach | old Fuß | 291 mm (11.46 in) | |
Emden, Hanover | Fuß | 296 mm (11.65 in) | |
Erfurt, Prussia | old Fuß | 1⁄14 Feldruthe, 1⁄16 Bauruthe | 283 mm (11.14 in) |
Frankfurt am Main | Fuß | 285 mm (11.22 in) | |
Freiburg, Canton of | Werkfuß | 12 Zoll, 1⁄10 Werkklafter | 293 mm (11.54 in) |
Friedberg in der Wetterau, Oberhessen | Fuß | 291 mm (11.46 in) | |
Friedrichsstadt, Denmark | Fuß | 296 mm (11.65 in) | |
Fulda, Kurhessen | Werkfuß | 1⁄2 Elle | 250 mm (9.84 in) |
Genf (Geneva), Canton of | Fuß | 1⁄8 Ruthe | 325 mm (12.80 in) |
Gießen, Oberhessen | Fuß | 298 mm (11.73 in) | |
Glarus, Canton of | Fuß | 300 mm (11.81 in) | |
Glatz, Prussia | Werkfuß | 287 mm (11.30 in) | |
Göttingen, Hanover | Fuß | 291 mm (11.46 in) | |
Gotha, Saxe-Coburg-Gotha | Fuß | 287 mm (11.30 in) | |
Halle an der Saale, Prussia | Werkfuß | 288 mm (11.34 in) | |
Halle an der Saale, Prussia | Feldfuß | 433 mm (17.05 in) | |
Hamburg | Fuß | 1⁄6 Klafter, 1⁄16 Geestruthe | 286 mm (11.26 in) |
Hanau, Hessen | Fuß | 2⁄25 Ruthe | 285 mm (11.22 in) |
Hanover, capital of the Kingdom | Fuß | 1⁄2 Elle, 1⁄16 Ruthe | 292 mm (11.50 in) |
Heidelberg, Baden | Fuß | 278 mm (10.94 in) | |
Heilbronn, Württemberg | Fuß | 278 mm (10.94 in) | |
Heiligenstadt, Prussia | old Fuß | 283 mm (11.14 in) | |
Herford, Prussia | old Fuß | 295 mm (11.61 in) | |
Hildesheim, Hanover | Fuß | 1⁄16 Ruthe | 280 mm (11.02 in) |
Holstein | Fuß | 296 mm (11.65 in) | |
Innsbruck, Austria | Tyroler-Fuß | 317 mm (12.48 in) | |
Königsberg, Prussia | old Fuß | 1⁄15 Ruthe | 307 mm (12.09 in) |
Krakau | Fuß or Stopa | 356 mm (14.02 in) | |
Lausanne, Canton of Waadt | Fuß | 293 mm (11.54 in) | |
Leipzig, Saxony | gewöhnlicher Fuß | 1⁄2 Elle, 1⁄6 Klafter 1⁄16 Ruthe | 282 mm (11.10 in) |
Lemberg, Austria | Galizian Fuß | 297 mm (11.69 in) | |
Lemgo, Lippe | Fuß | 287 mm (11.30 in) | |
Lindau, Bavaria | Fuß | 307 mm (12.09 in) | |
Lindau, Bavaria | Feldmeßschuh, Bauschuh | 289 mm (11.38 in) | |
Linz, Austria | Fuß | Klafter | 303 mm (11.93 in) |
Lübeck | Fuß | 291 mm (11.46 in) | |
Lucern, Canton of | Fuß (for wood measure) | 314 mm (12.36 in) | |
Lucern, Canton of | Zimmerwerkschuh | 304 mm (11.97 in) | |
Lucern, Canton of | Bau- and Feldmeßschuh | 284 mm (11.18 in) | |
Milan, Austria | old Fuß | 398 mm (15.67 in) | |
Mainz, Hessen | Werkfuß | 314 mm (12.36 in) | |
Mainz, Hessen | Kameralfuß (for firewood) | 287 mm (11.30 in) | |
Mannheim, Baden | Fuß | 290 mm (11.42 in) | |
Mecklenburg | Fuß | 1⁄2 Elle, 1⁄16 Ruthe | 291 mm (11.46 in) |
Metz, France | old Fuß | 406 mm (15.98 in) | |
Mühlhausen, Prussia | Fuß | 1⁄16 Ruthe | 281 mm (11.06 in) |
Neufchatel, Principality of | Werkfuß | 293 mm (11.54 in) | |
Neufchatel, Principality of | Feldmeßfuß | 318 mm (12.52 in) | |
Nordhausen, Prussia | old Fuß | 292 mm (11.50 in) | |
Nuremberg, Bavaria | Stadtfuß | 1⁄16 Ruthe | 304 mm (11.97 in) |
Nuremberg, Bavaria | Artillery Fuß | 292 mm (11.50 in) | |
Oldenburg | Fuß | 1⁄20 Ruthe | 296 mm (11.65 in) |
Osnabrück, Hanover | Fuß | 279 mm (10.98 in) | |
Padua, Austria | Fuß | 1⁄6 Cavezzo | 428 mm (16.85 in) |
Prague, Austria | Bohemian Fuß or Česká stopa | 296 mm (11.65 in) | |
Prussia, Rheinland | Reichsfuß | 313.8536 mm (12.36 in) [6] | |
Ratzeburg, Mecklenburg-Schwerin | Fuß | 291 mm (11.46 in) | |
Regensburg, Bavaria | Fuß | 313 mm (12.32 in) | |
Rheinbaiern | Fuß | 12 Zoll, 1⁄3 metre | 333 mm (13.11 in) |
Rheinland | Rheinländischer Fuß | 313.8536 mm (12.36 in) [6] | |
Rostock, Mecklenburg-Schwerin | Fuß | 1⁄2 Elle, 1⁄16 Ruthe | 286 mm (11.26 in) |
Sanct Gallen, Canton of | Fuß | 313 mm (12.32 in) | |
Schaffhausen, Canton of | Fuß | 298 mm (11.73 in) | |
Silesia (Austrian part) | Fuß | 289 mm (11.38 in) | |
Solothurn, Canton of | Fuß | 293 mm (11.54 in) | |
Stade, Hanover | Fuß | 291 mm (11.46 in) | |
Stettin, Prussia | old Pomeranian Fuß | 285 mm (11.22 in) | |
Stralsund, Prussia | old Fuß | 291 mm (11.46 in) | |
Strassburg, France | Fuß | 289 mm (11.38 in) | |
Stuttgart | Reichsfuß | 1⁄2 Elle, 1⁄10 Ruthe | 286 mm (11.26 in) |
Tessin, Canton of | Fuß | 397 mm (15.63 in) | |
Thorn, Prussia | old Fuß | 297 mm (11.69 in) | |
Trento, Austria | Fuß | 366 mm (14.41 in) | |
Trier, Prussia | Land- and Werkfuß | 294 mm (11.57 in) | |
Trier, Prussia | Waldfuß | 310 mm (12.20 in) | |
Trier, Prussia | Zimmermannsfuß | 305 mm (12.01 in) | |
Tyrol, Austria | Fuß | 334 mm (13.15 in) | |
Udine, Austria | Fuß | 329 mm (12.95 in) | |
Ulm, Württemberg | Fuß | 289 mm (11.38 in) | |
Venice, Austria | Fuß | 1⁄5 Passo | 348 mm (13.70 in) |
Verden, Hanover | Fuß | 291 mm (11.46 in) | |
Verona, Austria | Fuß | 1⁄6 Cavezzo | 347 mm (13.66 in) |
Vienna, Austria | Fuß | 1⁄6 Klafter | 316 mm (12.44 in) |
Waadt, Canton of | Fuß | 10 Zoll, 1⁄10 Ruthe | 300 mm (11.81 in) |
Wallis, Canton of | Fuß | 325 mm (12.80 in) | |
Weimar | Fuß | 282 mm (11.10 in) | |
Wesel, Prussia | old Fuß | 236 mm (9.29 in) | |
Wetzlar, Prussia | old Fuß | 274 mm (10.79 in) | |
Wiesbaden, Nassau | Fuß | 288 mm (11.34 in) | |
Wismar, Mecklenburg-Schwerin | Fuß | 292 mm (11.50 in) | |
Wittenberg, Prussia | old Fuß | 283 mm (11.14 in) | |
Worbis, Prussia | old Fuß | 286 mm (11.26 in) | |
Württemberg | Reichsfuß | 1⁄2 Elle, 1⁄10 Ruthe | 286 mm (11.26 in) |
Würzburg, Bavaria | Fuß | 1⁄2 Elle | 294 mm (11.57 in) |
Zug, Canton of | Fuß | 301 mm (11.85 in) | |
Zug, Canton of | Steinfuß | 268 mm (10.55 in) | |
Zürich, Canton of | Fuß | 1⁄6 Klafter, 1⁄10 Ruthe | 301 mm (11.85 in ) |
Except where noted, based on Niemann (1830). [5] The values of the other local units mentioned also varied widely. | |||
The Rute or Ruthe is of Carolingian origin,[ citation needed ] and was used as a land measure. Many different kinds of Ruthe were used at various times in various parts of the German-speaking world. They were subdivided into differing numbers of local Fuß, and were of many different lengths. One source from 1830 [5] lists the following:
Some kinds of Ruthe | |||
---|---|---|---|
Place | Name | Local equivalent | Metric (Imperial) equivalents |
Aachen (Aix-la-Capelle) | Feldmeßruthe | 16 Fuß | 4.512 m (14 ft 9.6 in ) |
Baden | Ruthe | 10 Fuß | 3 m (9 ft 10 in) |
Basel, Canton of | Ruthe | 16 Fuss | 4.864 m (15 ft 11.5 in) |
Bern, Canton of | Ruthe | 10 Fuss | 2.932 m (9 ft 7.4 in) |
Braunschweig (Brunswick) | Ruthe | 16 Fuß | 4.565 m (14 ft 11.7 in) |
Bremen | Ruthe | 8 Ellen or 16 Fuß | 4.626 m (15 ft 2.1 in) |
Calenberg | Ruthe | 16 Fuß | 4.677 m (15 ft 4.1 in) |
Cassel, Hessen | Ruthe | 14 Fuß | 4.026 m (13 ft 2.5 in) |
Hamburg | Geestruthe | 16 Fuß | 4.583 m (15 ft 0.4 in) |
Hamburg | Marschruthe | 14 Fuß | 4.010 m (13 ft 1.9 in) |
Hannover | Ruthe | 16 Fuß | 4.671 m (15 ft 3.9 in) |
Lever, Oldenburg | Ruthe | 20 Fuß | 4.377 m (14 ft 4.3 in) |
Mecklenburg | Ruthe | 16 Fuß | 4.655 m (15 ft 3.3 in) |
Nuremberg, Bavaria | Ruthe | 16 Fuß | 4.861 m (15 ft 11.4 in) |
Oldenburg | Ruthe | 20 Fuß | 5.927 m (19 ft 5.3 in) |
Prussia, Rheinland | Ruthe | 12 Fuß | 3.766 m (12 ft 4.3 in) |
Saxony | Ruthe | 16 Leipziger Fuß | 4.512 m (14 ft 9.6 in) |
Württemberg | Reichsruthe | 10 Fuß | 2.865 m (9 ft 4.8 in) |
Württemberg | old Ruthe | 16 Fuß | 4.583 m (15 ft 0.4 in) |
Zürich, Canton of | Ruthe | 10 Fuss | 3.009 m (9 ft 10.5 in) |
Except where noted, based on Niemann (1830). [5] The value of the local Fuß also varied widely. | |||
Originally 6 feet, after introduction of the metric system 10 feet.[ dubious ] Regional variants from 1.75 m (5 ft 9 in) in Baden to 3 m (9 ft 10 in) in Switzerland.
The Lachter was the most common unit of length used in mining in German-speaking areas. Its exact length varied from place to place but was roughly between 1.9 and 2.1 metres (6 ft 3 in and 6 ft 11 in).
Distance between elbow and fingertip. In the North, often 2 feet, In Prussia 17⁄8 feet, in the South variable, often 2+1⁄2 feet. The smallest known German Elle is 402.8 mm (15.86 in ), the longest 811 mm (31.9 in).
Usually 1⁄12 foot, but also 1⁄11 and 1⁄10.
Usually 1⁄12 inch, but also 1⁄10.
Being 1/5 of any measure
For firewood, 2.905 m3 (102.6 cu ft)
In general, the Nösel (also spelled Össel) was a measure of liquid volume equal to half a Kanne ("jar," "jug," "bottle," "can"). Volume often varied depending on whether it was beer or wine. Its subdivisions were the Halbnösel ("Half-Nösel") and the Viertelnösel ("Quarter-Nösel).
An Ahm was a measure used for wine or beer. An Eimer ("Bucket") was a container that was a fifth of an Ahm. A Viertel ("Fourth") was a fourth of an Eimer. A Stübchen ("Cozy Room") also a Stauf was a measure of wine or beer that was equal to 2 Kannen. It was the approximate amount of wine or beer that could serve an entire room in a tavern. A Kanne was a measure of wine or beer large enough to fill a humpen (tankard) or krug (wine flagon or beer pitcher). A Quartier ("quarter-measure") was a fourth of a Stübchen. A Nösel was a cup or mug of wine or beer.
Actual volumes so measured, however, varied from one state or even one city to another. Within Saxony, for example, the "Dresden jar" held approximately 1 US quart or 0.95 litres or 0.83 imperial quarts, so a nösel in Dresden was about 1 US pint (0.47 L; 0.83 imp pt). The full volume of a "Leipzig jar" measured 1.2 liters (1.3 U.S. qt; 1.1 imp qt); the Leipzig nösel was therefore 0.6 liters (0.63 U.S. qt; 0.53 imp qt).
The nösel was used in minor commerce, as well as in the household to measure meal, grain, and such. These units of measure were officially valid in Saxony until 1868, when the metric system was introduced. Nevertheless, the old measures have continued in private use for decades.
One modification was introduced in Thuringia. There, the nösel was, by extension, also a measure of area; namely, the area of land which could be sown with one nösel of seed — or about 19.36 square yards (16.19 m2; 0.00400 acres)
Old German (Prussian) Pfund: Unit equivalent to 467.7 g (1.031 lb)
more recent Zollpfund : 500 g (1.102 lb)
1⁄2Pfund. Equal to 233.9g (Roughly 8.250oz)
1⁄16 of a Pfund. Equal to 29.23g (Roughly 1.031oz)
1⁄32 of a Pfund, or 1⁄16 of a Mark. Equal to 14.62g (Roughly 0.512oz)
1⁄96 of a Pfund. Roughly Equal to 4.872g
1⁄128 of a Pfund. Roughly Equal to 3.654g
1⁄512 of a Pfund. Roughly Equal to 0.9135g
1⁄7690 of a Pfund. Equal to 60.9 mg (0.9398306 grains)
The mile, sometimes the international mile or statute mile to distinguish it from other miles, is a British imperial unit and US customary unit of distance; both are based on the older English unit of length equal to 5,280 English feet, or 1,760 yards. The statute mile was standardised between the British Commonwealth and the United States by an international agreement in 1959, when it was formally redefined with respect to SI units as exactly 1,609.344 metres.
The pound or pound-mass is a unit of mass used in British imperial and United States customary systems of measurement. Various definitions have been used; the most common today is the international avoirdupois pound, which is legally defined as exactly 0.45359237 kilograms, and which is divided into 16 avoirdupois ounces. The international standard symbol for the avoirdupois pound is lb; an alternative symbol is lbm, #, and ℔ or ″̶.
The foot (pl. feet), standard symbol: ft, is a unit of length in the British imperial and United States customary systems of measurement. The prime symbol, ′, is a customarily used alternative symbol. Since the International Yard and Pound Agreement of 1959, one foot is defined as 0.3048 meters exactly. In both customary and imperial units, one foot comprises 12 inches and one yard comprises three feet.
The quart is an English unit of volume equal to a quarter gallon. Three kinds of quarts are currently used: the liquid quart and dry quart of the US customary system and the imperial quart of the British imperial system. All are roughly equal to one liter. It is divided into two pints or four cups. Historically, the exact size of the quart has varied with the different values of gallons over time and in reference to different commodities.
The rod, perch, or pole is a surveyor's tool and unit of length of various historical definitions, often between approximately 9'10" and 26'2" ft.. In modern US customary units it is defined as 16+1⁄2 US survey feet, equal to exactly 1⁄320 of a surveyor's mile, or a quarter of a surveyor's chain, and is approximately 5.0292 meters. The rod is useful as a unit of length because whole number multiples of it can form one acre of square measure (area). The 'perfect acre' is a rectangular area of 43,560 square feet, bounded by sides 660 feet long and 66 feet wide or, equivalently, 40 rods and 4 rods. An acre is therefore 160 square rods or 10 square chains.
The apothecaries' system, or apothecaries' weights and measures, is a historical system of mass and volume units that were used by physicians and apothecaries for medical recipes and also sometimes by scientists. The English version of the system is closely related to the English troy system of weights, the pound and grain being exactly the same in both. It divides a pound into 12 ounces, an ounce into 8 drachms, and a drachm into 3 scruples of 20 grains each. This exact form of the system was used in the United Kingdom; in some of its former colonies, it survived well into the 20th century. The apothecaries' system of measures is a similar system of volume units based on the fluid ounce. For a long time, medical recipes were written in Latin, often using special symbols to denote weights and measures.
A system of measurement is a collection of units of measurement and rules relating them to each other. Systems of measurement have historically been important, regulated and defined for the purposes of science and commerce. Systems of measurement in use include the International System of Units or SI, the British imperial system, and the United States customary system.
The following systems arose from earlier systems, and in many cases utilise parts of much older systems. For the most part they were used to varying degrees in the Middle Ages and surrounding time periods. Some of these systems found their way into later systems, such as the Imperial system and even SI.
A league is a unit of length. It was common in Europe and Latin America, but is no longer an official unit in any nation. Derived from an ancient Celtic unit and adopted by the Romans as the leuga, the league became a common unit of measurement throughout western Europe. It was intended to represent, roughly, the distance a person could walk in an hour. Since the Middle Ages, many values have been specified in several countries.
The zentner is a name for a unit of mass which was used predominantly in Germany, Austria, and Switzerland, although it was also sometimes used in the United Kingdom – for example, as a measure of the weight of certain crops including hops for beer production – and similar units were used in Scandinavia. Like the notion of hundredweight, the zentner is the weight of 100 units, where the value of the unit depends on the time and location. Traditionally the unit was one hundred pounds with the precise value being context-dependent, making one zentner equal to about 50 kilograms (110 lb).
The Lot was a unit of measurement of mass, which was mainly used in German-speaking states of the Holy Roman Empire and in Scandinavia.
The lachter was a common unit of length used in the mining industry in Europe, usually to measure depth, tunnel driving and the size of mining fields; it was also used for contract work. In most German-speaking mining fields it was the most important unit of length.
A number of units of measurement were used in Estonia to measure length, mass, area, capacity, etc.
A number of units of measurement were used in Hungary to measure length, area, volume, and so on. The metric system was adopted in Hungary in 1874 and has been compulsory since 1876.
A number of units of measurements were used in Latvia to measure length, mass, area, and so on. Russian and local measures were used since 1845, and the former system before those, was that of the Netherlands.
A number of units of measurement were used in Switzerland to measure length, mass, etc. Metric system was optional in 1868, and has been compulsory since 1877.
A number of units of measurement were used in South Africa to measure quantities like length, mass, capacity, etc. The Imperial system of measurements was made standard in 1922 and the metric system was adopted in 1970.
Moio, older spelling moyo, also as mojo, from the Latin "modius", was a metrological term used for grain and liquid in Galicia, Portugal and its colonies.
The klafter is an historical unit of length, volume and area that was used in Central Europe.
A Münzfuß is an historical term, used especially in the Holy Roman Empire, for an official minting or coinage standard that determines how many coins of a given type were to be struck from a specified unit of weight of precious metal. The Münzfuß, or Fuß ("foot") for short in numismatics), determined how much of a precious metal (fineness) a coin would have. Mintmaster Julian Eberhard Volckmar Claus defined the standard in his 1753 work, Kurzgefaßte Anleitung zum Probieren und Münzen, as follows: "The appropriate proportion of metals and the weight of the coin, measured according to their internal and external worth, or determined according to their quality, additives and fineness, number and weight, is called the Münzfuß."
{{cite book}}
: CS1 maint: others (link)