Sarma method

Last updated

The Sarma method is a method used primarily to assess the stability of soil slopes under seismic conditions. Using appropriate assumptions the method can also be employed for static slope stability analysis. It was proposed by Sarada K. Sarma in the early 1970s as an improvement over the other conventional methods of analysis which had adopted numerous simplifying assumptions.

Contents

History

Sarma worked in the area of seismic analysis of earth dams under Ambraseys at Imperial College for his doctoral studies in the mid 1960s. [1] The methods for seismic analysis of dams available at that time were based on the Limit Equilibrium approach and were restricted to planar or circular failures surfaces adopting several assumptions regarding force and moment equilibrium (usually satisfying one of the two) and about the magnitude of the forces (such as interslice forces being equal to zero).

Sarma looked into the various available methods of analysis and developed a new method for analysis in seismic conditions and calculating the permanent displacements due to strong shaking. His method was published in the 1970s (the very first publication was in 1973 [2] and later improvements came in 1975 [3] and 1979 [4] ).

Method

Assumptions

The method satisfies all conditions of equilibrium, (i.e. horizontal and vertical force equilibrium and moment equilibrium for each slice). It may be applied to any shape of slip surface as the slip surfaces are not assumed to be vertical, but they may be inclined. It is assumed that magnitudes of vertical side forces follow prescribed patterns. For n slices (or wedges), there are 3n equations and 3n unknowns, and therefore it statically determinate without the need of any further additional assumptions.

Advantages

The Sarma method is called an advanced and rigorous method of static and seismic slope stability analysis. It is called advanced because it can take account of non-circular failure surfaces. Also, the multi-wedge approach allows for non-vertical slices [5] and irregular slope geometry. [6] It is called a rigorous method because it can satisfy all the three conditions of equilibrium, horizontal and vertical forces and moments. The Sarma method is nowadays used as a verification to finite element programs (also FE limit analysis) and it is the standard method used for seismic analysis.

Use

The method is used mainly for two purposes, to analyse earth slopes and earth dams. When used to analyse seismic slope stability it can provide the factor of safety against failure for a given earthquake load, i.e. horizontal seismic force or acceleration (critical acceleration). Besides, it can provide the required earthquake load (force or acceleration) for which a given slope will fail, i.e. the factor of safety will be equal to 1.

When the method is used in the analysis of earth dams (i.e. the slopes of the dam faces), the results of the analysis, i.e. the critical acceleration is used in the Newmark's sliding block analysis [7] in order to calculate the induced permanent displacements. This follows the assumption that displacements will result if the earthquake induced accelerations exceed the value of the critical acceleration for stability.

Accuracy

General acceptance

The Sarma method has been extensively used in seismic analysis software for many years and has been the standard practice until recently for seismic slope stability for many years (similar to the Mononobe–Okabe method [8] [9] for retaining walls). Its accuracy has been verified by various researchers and it has been proved to yield results quite similar to the modern safe Lower Bound numerical stability Limit Analysis methods (e.g. the 51st Rankine Lecture [10] [11] ).

Modern alternatives

However, nowadays modern numerical analysis software employing usually the finite element, finite difference and boundary element methods are more widely used for special case studies. [12] [13] Particular attention has been recently given to the finite element method [14] which can provide very accurate results through the release of several assumptions usually adopted by the conventional methods of analysis. Special boundary conditions and constitutive laws can model the case in a more realistic fashion.

See also

Related Research Articles

Geotechnical engineering Scientific study of earth materials in engineering problems

Geotechnical engineering, also known as geotechnics, is the branch of civil engineering concerned with the engineering behavior of earth materials. It uses the principles of soil mechanics and rock mechanics for the solution of its respective engineering problems. It also relies on knowledge of geology, hydrology, geophysics, and other related sciences. Geotechnical (rock) engineering is a subdiscipline of geological engineering.

Engineering geology Application of geology to engineering practice

Engineering geology is the application of geology to engineering study for the purpose of assuring that the geological factors regarding the location, design, construction, operation and maintenance of engineering works are recognized and accounted for. Engineering geologists provide geological and geotechnical recommendations, analysis, and design associated with human development and various types of structures. The realm of the engineering geologist is essentially in the area of earth-structure interactions, or investigation of how the earth or earth processes impact human made structures and human activities.

Earthquake engineering Interdisciplinary branch of engineering

Earthquake engineering is an interdisciplinary branch of engineering that designs and analyzes structures, such as buildings and bridges, with earthquakes in mind. Its overall goal is to make such structures more resistant to earthquakes. An earthquake engineer aims to construct structures that will not be damaged in minor shaking and will avoid serious damage or collapse in a major earthquake. Earthquake engineering is the scientific field concerned with protecting society, the natural environment, and the man-made environment from earthquakes by limiting the seismic risk to socio-economically acceptable levels. Traditionally, it has been narrowly defined as the study of the behavior of structures and geo-structures subject to seismic loading; it is considered as a subset of structural engineering, geotechnical engineering, mechanical engineering, chemical engineering, applied physics, etc. However, the tremendous costs experienced in recent earthquakes have led to an expansion of its scope to encompass disciplines from the wider field of civil engineering, mechanical engineering, nuclear engineering, and from the social sciences, especially sociology, political science, economics, and finance.

Nathan M. Newmark

Nathan Mortimore Newmark was an American structural engineer and academic, who is widely considered one of the founding fathers of earthquake engineering. He was awarded the National Medal of Science for engineering.

Internal erosion is the formation of voids within a soil caused by the removal of material by seepage. It is the second most common cause of failure in levees and one of the leading causes of failures in earth dams, responsible for about half of embankment dam failures.

UTEXAS

UTEXAS is a slope stability analysis program written by Stephen G. Wright of the University of Texas at Austin. The program is used in the field of civil engineering to analyze levees, earth dams, natural slopes, and anywhere there is concern for mass wasting. UTEXAS finds the factor of safety for the slope and the critical failure surface. Recently the software was used to help determine the reasons behind the failure of I-walls during Hurricane Katrina.

Peter Rolfe Vaughan

Peter Rolfe Vaughan ACGI, DIC, FREng, FICE, FCGI, MASCE, FGS, was Emeritus Professor of Ground Engineering in the Geotechnics department of Imperial College London.

Slope stability analysis is a static or dynamic, analytical or empirical method to evaluate the stability of earth and rock-fill dams, embankments, excavated slopes, and natural slopes in soil and rock. Slope stability refers to the condition of inclined soil or rock slopes to withstand or undergo movement. The stability condition of slopes is a subject of study and research in soil mechanics, geotechnical engineering and engineering geology. Analyses are generally aimed at understanding the causes of an occurred slope failure, or the factors that can potentially trigger a slope movement, resulting in a landslide, as well as at preventing the initiation of such movement, slowing it down or arresting it through mitigation countermeasures.

SVSLOPE is a slope stability analysis program developed by SoilVision Systems Ltd.. The software is designed to analyze slopes using both the classic "method of slices" as well as newer stress-based methods. The program is used in the field of civil engineering to analyze levees, earth dams, natural slopes, tailings dams, heap leach piles, waste rock piles, and anywhere there is concern for mass wasting. SVSLOPE finds the factor of safety or the probability of failure for the slope. The software makes use of advanced searching methods to determine the critical failure surface.

Solid waste landfills can be affected by seismic activity. The tension in a landfill liner rises significantly during an earthquake, and can lead to stretching or tearing of the material. The top of the landfill may crack, and methane collection systems can be moved relative to the cover.

A finite element limit analysis (FELA) uses optimisation techniques to directly compute the upper or lower bound plastic collapse load for a mechanical system rather than time stepping to a collapse load, as might be undertaken with conventional non-linear finite element techniques. The problem may be formulated in either a kinematic or equilibrium form.

The Rankine lecture is an annual lecture organised by the British Geotechnical Association named after William John Macquorn Rankine, an early contributor to the theory of soil mechanics.

Alan Wilfred Bishop was a British geotechnical engineer and academic, working at Imperial College London.

Sarada Kanta Sarma is a geotechnical engineer, emeritus reader of engineering seismology and senior research investigator at Imperial College London. He has developed a method of seismic slope stability analysis which is named after him, the Sarma method.

Department of Civil and Environmental Engineering, Imperial College London

The Department of Civil and Environmental Engineering is the academic department at Imperial College London dedicated to civil engineering. It is located at the South Kensington Campus in London, along Imperial College Road. The department is currently a part of the college's Faculty of Engineering, which was formed in 2001 when Imperial College restructured. The department has consistently ranked within the top five on the QS World University Rankings in recent years.

Thomas Denis O’Rourke is an American educator, engineer and serves as the Thomas R. Biggs Professor, Civil & Environmental Engineering at the College of Engineering, Cornell University. Professor O’Rourke took his Bachelor of Science in civil engineering at Cornell's engineering college in 1970 and his doctorate at the University of Illinois at Urbana-Champaign in 1975.

The Newmark's sliding block analysis method is an engineering that calculates permanent displacements of soil slopes during seismic loading. Newmark analysis does not calculate actual displacement, but rather is an index value that can be used to provide an indication of the structures likelihood of failure during a seismic event. It is also simply called Newmark's analysis or Sliding block method of slope stability analysis.

Geotechnical centrifuge modeling

Geotechnical centrifuge modeling is a technique for testing physical scale models of geotechnical engineering systems such as natural and man-made slopes and earth retaining structures and building or bridge foundations.

David Malcolm Potts is a professor of Analytical Soil Mechanics at Imperial College London and the head of the Geotechnics Section at Imperial College. He has been a member of the academic staff at Imperial College since 1979, responsible for teaching the use of analytical methods in geomechanics and the design of slopes and earth retaining structures, both at undergraduate and postgraduate levels.

Nicholas Ambraseys Greek seismologist (1929-2012)

Nicholas Neocles Ambraseys FICE FREng was a Greek engineering seismologist. He was emeritus professor of Engineering Seismology and Senior Research Fellow at Imperial College London. For many years Ambraseys was considered as the leading figure and an authority in earthquake engineering and seismology in Europe.

References

  1. ↑ Sarma S. K. (1968) Response characteristics and stability of earth dams during strong earthquakes . PhD Thesis, Imperial College of Science & Technology, University of London
  2. ↑ Sarma, S. K. (1973). "Stability analysis of embankments and slopes". Géotechnique. 23 (3): 423–433. doi:10.1680/geot.1973.23.3.423.
  3. ↑ Sarma, S. K. (1975). "Seismic stability of earth dams and embankments". Géotechnique. 25 (4): 743–761. doi:10.1680/geot.1975.25.4.743.
  4. ↑ Sarma S. K. (1979), Stability analysis of embankments and slopes. Journal of Geotechnical Engineering, ASCE, 1979, 105, 1511–1524, ISSN   0093-6405
  5. ↑ Non-vertical slices using Sarma's method
  6. ↑ Advantages of using Sarma's method
  7. ↑ Newmark, N. M. (1965) Effects of earthquakes on dams and embankments. Geotechnique, 15 (2) 139–160.
  8. ↑ Okabe, S. (1926) General theory of earth pressures. Journal of the Japanese Society of Civil Engineers, 12 (1)
  9. ↑ Mononobe, N & Matsuo, H. (1929) On the determination of earth pressures during earthquakes. Proceedings of the World Engineering Congress, 9.
  10. ↑ Sloan, S. W. (2013). "Geotechnical stability analysis". Géotechnique. 63 (7): 531–571. doi:10.1680/geot.12.RL.001. hdl: 1959.13/1060002 .
  11. ↑ 51st Rankine Lecture – Geotechnical Stability Analysis
  12. ↑ Zienkiewicz O C, Chan A H C, Pastor M, Schrefler B A, Shiomi T (1999) Computational Geomechanics with Special Reference to Earthquake Engineering. John Wiley & Sons, London.
  13. ↑ Zienkiewicz, O. C. & Taylor, R. L. (1989) The Finite Element Method. McGraw–Hill, London.
  14. ↑ Griffiths, D. V. & Lane, P. V. (1999) Slope stability analysis by finite elements. Geotechnique, 49 (3) 387–403

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.