Forth Road Bridge | |
---|---|
Coordinates | 56°00′03″N03°24′15″W / 56.00083°N 3.40417°W |
Carries |
|
Crosses | Firth of Forth |
Locale | Edinburgh and Fife, Scotland |
Official name | Forth Road Bridge |
Maintained by | Transport Scotland |
Characteristics | |
Design | Suspension bridge |
Total length | 2,512 m (8,241 ft) [1] |
Width | 33 m (108 ft) dual two-lane carriageway, two cycle/footpaths [1] |
Height | 156 m (512 ft) [2] |
Longest span | 1,006 m (3,301 ft) [1] |
Clearance below | 44.3 m (145 ft) [1] |
History | |
Constructed by | |
Opened | 4 September 1964 |
Statistics | |
Daily traffic | 65,000 vpd (2012 figures) [3] |
Toll | Free since 11 February 2008 |
Location | |
The Forth Road Bridge is a suspension bridge in east central Scotland. The bridge opened in 1964 and at the time was the longest suspension bridge in the world outside the United States. [4] [5] The bridge spans the Firth of Forth, connecting Edinburgh, at South Queensferry, to Fife, at North Queensferry. It replaced a centuries-old ferry service to carry vehicular traffic, cyclists and pedestrians across the Forth; railway crossings are made by the nearby Forth Bridge, opened in 1890.
The Scottish Parliament voted to scrap tolls on the bridge from February 2008. [6] The adjacent Queensferry Crossing was opened in August 2017 to carry the M90 motorway across the Firth of Forth, replacing the Forth Road Bridge which had exceeded its design capacity. [7] At its peak, the Forth Road Bridge carried 65,000 vehicles per day.
The Forth Road Bridge was subsequently closed for repairs and refurbishment. It reopened in February 2018, now redesignated as a dedicated Public Transport Corridor, with access to motor vehicles other than buses and taxis restricted; [lower-alpha 1] pedestrians and cyclists are still permitted to use the bridge. [9] In May 2023, Stagecoach Fife started the first driverless bus service to carry passengers in the United Kingdom along a park-and-ride route which includes the Forth Road Bridge as its main section. [10] [11]
The first crossing at the site of the bridge was established in the 11th century by Margaret, queen consort of King Malcolm III, who founded a ferry service to transport religious pilgrims from Edinburgh to Dunfermline Abbey and St Andrews. [12] Its creation gave rise to the port towns of Queensferry and North Queensferry, which remain to this day; the passenger ferry service continued without interruption for over 800 years. There were proposals as early as the 1740s for a road crossing at the site, although its viability was only considered after the Forth Bridge was built in 1890. [13]
The importance of the crossing for vehicular traffic was underpinned when the Great Britain road numbering scheme was drawn up in the 1920s. The planners wished the arterial A9 road to be routed across the Forth here, although the unwillingness to have a ferry crossing as part of this route led to the A90 number being assigned instead. [14]
There was more lobbying for a road crossing in the 1920s and 1930s, when the only vehicle crossing was a single passenger and vehicle ferry. Sir William Denny championed the expansion of that service in the 1930s, providing and operating on behalf of the London and North Eastern Railway two additional ferries to supplement the nearby railway bridge. Due to their success, two more ferry boats were added in the 1940s and 1950s, [15] by which time the ferries were making 40,000 crossings annually, carrying 1.5 million passengers and 800,000 vehicles.
With the then newest and nearest bridge spanning the Forth (the Kincardine Bridge, built in 1936) still around 15 miles (24 km) upstream, the upsurge in demand for a road crossing between Edinburgh and Fife [16] prompted the UK Government to establish the Forth Road Bridge Joint Board (FRBJB) by Act of Parliament in 1947 to oversee the implementation of a new bridge to replace the ferry service. [17] The authorities on both sides investigated in 1955, and drew up an alternative scheme for a tunnel beneath the estuary. This was known as the Maunsell Scheme, and was projected to run somewhat closer to the rail bridge than the present road bridge. The scheme was abandoned as too ambitious, and a bridge was built instead. [18]
The final construction plan was accepted in February 1958 and work began that September. [19] Mott, Hay and Anderson and Freeman Fox & Partners carried out the design work and a joint venture of Sir William Arrol & Co., Cleveland Bridge & Engineering Company and Dorman Long constructed the bridge at a cost of £15.1 million. [20] The resident design engineer was John Alexander King Hamilton FRSE (1900–1982). [21]
It was the longest steel suspension bridge in Europe. [22] It used 210,000 tons of concrete, with 9 miles (14 kilometres) of grade-separated dual-carriageway approach roads. Reed & Mallik built the approach viaducts. [23]
Twenty-four individual bridges were built for the approach roads. The 4+1⁄2-mile (7.2 km) southern approach road of the A90 began at Cramond Bridge, over the River Almond on the western outskirts of Edinburgh, near Craigiehall. There were two-level interchanges built at Burnshot, Dolphington (B924) and the Echline junction (A904 and B800). At Dalmeny there was a bridge over the railway. The southern approach roads were built by A.M. Carmichael Ltd. The 4 mi (6 km) northern approach road had three two-level junctions at Ferry Toll [24] (for the B980), Admiralty (for Rosyth Dockyard via the A985, and Inverkeithing via the A921) and at Mastertown/Masterton (for what would be the fledgling M90 southern terminus). The Masterton junction was an octopus junction, a variation of a clover-leaf junction, with six bridges and a 600 ft viaduct. There were fifteen bridges built for this approach road. The northern approach road terminated as the A823(M) at a roundabout with the A823 south of Dunfermline, next to Rosyth railway station. [25] The northern approach roads were built by Whatlings Ltd of Glasgow, later bought by Alfred McAlpine.
Seven people died during construction before the bridge was opened by Queen Elizabeth II and the Duke of Edinburgh on 4 September 1964. [26] The ferry service was discontinued as of that date.
The bridge's management was delegated to the FRBJB, and remained so until 2002 when its operation was transferred to a new body with a wider remit, the Forth Estuary Transport Authority. [27]
On 1 December 2010, the bridge was closed for the first time due to heavy snow. After several accidents meant snowploughs were unable to clear the carriageways, the bridge was closed in both directions at 6.40 a.m. and remained closed for several hours. [28]
As part of celebrations of the 50th anniversary of the bridge's operation, artist Kate Downie was commissioned to create a print of the bridge and hold an exhibition of works portraying it. [29]
On 1 June 2015, Amey took over the maintenance and operating of the bridge on behalf of Transport Scotland from the Forth Estuary Transport Authority, [30] [31] and are now called the Forth Bridges Unit. [32]
Forth Estuary Transport Authority (FETA) began to be concerned over the structural wear of the bridge in the early years of the 21st century. The planned theoretical capacity for the bridge (30,000 vehicles per day in each direction) was routinely exceeded as traffic levels outstripped predictions. The Scottish Government stated in 2006 that 60,000 vehicles travelled on more than half the days in a year. [33] This raised concerns about the lifespan of the bridge, originally planned at 120 years. [33]
In 2003, an inspection programme was launched (costing £1.2 million) to assess the condition of the main suspension cables after corrosion was discovered in a number of older bridges in the United States of a similar design and size. The study was completed two years later and reported that the main cables had suffered an 8%–10% loss of strength. This weakening was projected to accelerate, with traffic restrictions to limit loading required in 2014 in the worst-case scenario, followed by full closure by 2020. [34]
An acoustic monitoring system was commissioned in August 2006, using listening devices to monitor any further strands snapping and pinpoint their location within the main cables. In January 2006, the Scottish Executive completed a third-party audit on the bridge which concluded that FETA had performed the initial internal inspection and cable strength calculation in accordance with accepted practice. The report suggested that traffic restrictions could be required by 2013. [35]
Several actions were taken to increase the bridge's lifespan. These included a dehumidification programme that slowed the rate of corrosion in the main cables by keeping air in the voids between the main cables' strands below 40% humidity. Engineering consultants Faber Maunsell began work on the project in 2006; it took two and a half years to complete at a cost of £7.8 million. [36] As part of the works, some of the corroded cable strands were spliced. [37]
The southbound carriageway of the bridge was closed on 1 December 2015, with all traffic using a single lane each way on the northbound carriageway after steelwork defects had been discovered during routine inspections, [38] and traffic was restricted to 7.5 tonnes or less (public service vehicles excepted). [39] On 4 December, the bridge was fully closed when further structural faults were found. It was initially not expected to reopen until January 2016, and Transport Scotland began work to lay on extra trains and buses and considered whether to reintroduce a ferry service to mitigate the impact on travellers. [40] [41] [42]
On 23 December, the bridge was reopened for all traffic except heavy goods vehicles (HGVs). On 4 February, it was announced this had been pushed back to March, [43] [44] due to further problems with the truss end link pins in the southern towers, which required additional remedial work. [45] [46] [47] However, a limited number of HGVs were allowed to cross, in a northbound direction only, between 11 pm and 4 am each night. [48] On 20 February 2016, the bridge was fully reopened. [49]
On 20 January 2016, the Scottish Parliament began an inquiry led by the Infrastructure and Capital Investment Committee (ICI) to determine the circumstances that led to the discovery of a cracked truss in the bridge's undercarriage. [50] Evidence was heard from: FETA, Transport Minister Derek Mackay, engineers and officials from Amey along with a number of other experts and key personnel.
On the first day, Richard Hornby, of engineering consulting firm Arup, stated that the truss end in question had been inspected 23 times since 2001, and no fault had been found. It was revealed that a pin had seized up, which caused the truss end to crack, and it was only the quality of the steel which had stopped its cracking appearing earlier. Hornby also made clear that even if the seized pin had been picked up earlier, it was "virtually impossible" to lubricate the bearing. [51] [52] Several witnesses defended a decision by previous operator FETA not to proceed with a £15 million truss end link replacement project in 2010. This was disputed by Barry Colford, former chief engineer and bridgemaster at FETA. Lesley Hinds, FETA's former convener, pointed out that the bridge budget had been cut by 58% in 2011, [53] while senior staff at FETA had "deep concerns" about the transfer of bridge management to a private company. [54] [55]
The strategic transport importance of the road bridge and the threat of closure by 2020 if major structural work were not undertaken led to fears of serious economic consequences. [56] Increasing traffic levels across the Firth of Forth had also led to the construction of the Clackmannanshire Bridge [57] adjacent to the existing Kincardine Bridge. This bridge opened in November 2008.
Proposals for a second road crossing at Queensferry had been made in the 1990s, but were shelved, despite preliminary work on route selection. Following the discovery of potentially serious structural issues with the Forth Road Bridge in 2005 the proposals were revisited and plans advanced. The decision to proceed with a replacement bridge was taken at the end of 2007, and it was announced the following year that the existing bridge would be retained as a public transport link. The Forth Crossing Act received Royal Assent in January 2011, [58] and the new bridge was opened in late 2017.
On 1 February 2018, the Forth Road Bridge became a Public Transport Corridor, with all approach roads in full operation. [59] [60] The bridge was closed between September and mid October 2017 for roadworks before partially reopening for public buses. [61]
As of December 2020, work was underway that would allow the Forth Road Bridge to become an emergency diversion route for private transport. [62] The Queensferry Crossing has proofing that makes it less vulnerable to high winds than the Forth Road Bridge, but it was closed for the first time in February 2020 due to accumulations of ice on its towers. [62]
On 22 November 2018, it was announced that £4.35 million of funding had been secured for the United Kingdom's first passenger-carrying driverless bus trial, planned to take place across the Forth Road Bridge public transport corridor by 2021. [63] Five brand new autonomous 42-seater Alexander Dennis Enviro200AV single-decker buses, with autonomous control modifications supplied by Fusion Processing, are operated by Stagecoach Fife on a 14 miles (23 km) park-and-ride route in mixed traffic at up to 50 mph (80 km/h) between Inverkeithing, on the north side of the Forth, and Edinburgh Park Transport Exchange, across the bridge. The service has two members of staff onboard – for operational reasons and to comply with UK legislation, a safety driver is still present in the cab to monitor the technology, but they do not operate the vehicle other than in exceptional circumstances. A 'captain' takes tickets and answers questions. The service started on 15 May 2023 and runs on a frequent timetable with capacity anticipated to be around 10,000 passenger journeys a week. [64] [11]
The bridge's central main span is 1,006 metres (3,301 ft) long, its two side spans are each 408 metres (1,339 ft) long, and the approach viaducts are 257 metres (843 ft) on the north side and 438 metres (1,437 ft) on the south side. The total length is 2,512 metres (8,241 ft). [65] It was the longest suspension bridge span outside the United States and the fourth-longest span in the world at the time of its construction. The bridge is made of 39,000 tonnes of steel and 115,000 cubic metres of concrete. The towers reach 156 metres (512 ft) above mean water level. There is a dual carriageway road with two lanes in each direction, and cycle/footpaths on each side. The main strung cables are 590 millimetres (23 in) in diameter, with 11,618 high tensile wires, each five millimetres in diameter, and each cable carries 13,800 tonnes of the bridge's load. [1] [2]
The bridge formed a crucial part of the corridor between south-east and north-east Scotland, linking Edinburgh to Perth, Dundee and Aberdeen by the A90 road and its sister M90 motorway, which used to begin 1+2⁄3 miles (2.7 km) north of the bridge's northern end. The bridge carried around 2.5 million vehicles in its first year, increasing to around 21.4 million vehicles in 2008. [66] The bridge carried its 250 millionth vehicle in 2002.
It was awarded Historic Scotland's Category A listed structure status in 2001. [67] [68]
On 11 February 2008, tolls were abolished on the bridge by The Scottish Government. [69]
Initially, it was suggested that tolls would cease once the original cost of construction (plus accrued interest) was repaid. This was achieved in 1993, and it was planned that tolls would not be levied after May 1995. Instead, legislation enabling the continued levying of tolls was renewed by Parliament (originally that of the UK but now the Scottish Parliament) in 1998, 2003 and 2006. [70]
Originally, a toll was paid for each direction of travel, with sets of tollbooths on both carriageways. In 1997, the northbound toll was doubled (from 40p to 80p) and the southbound toll abolished on the presumption that almost all traffic makes a return journey across the bridge, and that the removal of the southbound toll would result in a reduction of congestion without reducing revenue.
FETA said the continued charging of tolls was necessary to fund maintenance and improvement works. These included the construction of defences around the submerged piers forming the bases of the main towers to guard against collisions. The main towers were also strengthened with internal steel columns (the original tower structure was hollow) and had hydraulic rams jack up these sections to transfer a portion of the load to the new steelwork. Also, the vertical cables suspending the deck had their bolts replaced after a detected failure. A new paint system required development for the bridge (the original was phased out due to environmental concerns). [71]
In late-2005, FETA's committee approved a proposed revamp of the tolls. The minimum toll would stay fixed at £1, but higher tolls would be charged at some times of day, with a maximum of £4 during evening rush hours. All tolls would be halved for cars with more than one occupant, as an incentive for motorists to share cars and make fewer journeys. [72] According to FETA's chairman Lawrence Marshall, the system would provide the most efficiency; he said that 80% of peak-time journeys are made by single-occupant vehicles. The proposal, passed with the chairman's casting vote after the committee was deadlocked, was referred to the Scottish Executive in December 2005, and implementation planned for October 2007 subject to approval by Transport Minister Tavish Scott. Environmental groups welcomed the proposal, but local politicians condemned it as simply a means of raising capital. At the same time, Fife councillors counter-proposed the complete removal of tolls. [73]
The Scottish Parliament debated the proposals in January 2006, and the affair became a major political issue after UK Cabinet Ministers Gordon Brown and Alistair Darling (Chancellor of the Exchequer and Secretary of State for Scotland respectively) were seen to describe the variable tolling plan as "dead in the water". [74] Scottish First Minister Jack McConnell insisted his Labour Party colleagues were misquoted, and refused to rule out the plan, receiving criticism from the opposition Scottish National Party. [75]
There was a by-election on 9 February 2006 for Dunfermline and West Fife, the constituency in which the north end of the bridge is situated. It was contested (in addition to the major political parties in Scotland) by an Abolish Forth Bridge Tolls Party. Liberal Democrat candidate Willie Rennie won the election, overturning a large Labour majority on a 16% swing. Afterwards, media speculated that the Executive had turned against the proposals, and Tavish Scott eventually confirmed their rejection and the retention of the existing toll structure on 1 March 2006. FETA condemned the decision, while local opposition MSPs charged the Minister that his tolling review short-changed Fifers as tolls were axed on the Erskine Bridge, leaving tolls on just the Forth and Tay Road Bridges. [76]
When an SNP minority government was formed after the Scottish parliamentary election of May 2007, a new debate on the abolition of tolls was opened by Transport Minister Stewart Stevenson on 31 May 2007, and the abolition was agreed by a large majority. Annual toll income at that point totalled £16,000,000. [77]
The Abolition of Bridge Tolls (Scotland) Bill was introduced in the Scottish Parliament on 3 September 2007, passed on 20 December 2007, and received royal assent on 24 January 2008. [78] The tolls were removed on 11 February 2008 at 00:01 GMT. [79] The abolition of the tolls was enacted immediately after a major reconstruction of the northbound toll plaza was completed. [80]
In 2011, it was stated that around 800 people had fallen to their deaths since the bridge had opened. [81] A report in 2000 stated that prior to then, four people had survived falling from the bridge. [82]
The Dartford–Thurrock River Crossing, commonly known as the Dartford Crossing and until 1991 the Dartford Tunnel, is a major road crossing of the River Thames in England, carrying the A282 road between Dartford in Kent in the south and Thurrock in Essex in the north.
The Firth of Forth is the estuary, or firth, of several Scottish rivers including the River Forth. It meets the North Sea with Fife to its north and Lothian to its south.
The Tamar Bridge is a suspension bridge over the River Tamar between Saltash, Cornwall and Plymouth, Devon in southwest England. It is 335 metres (1,099 ft) long, running adjacent the Royal Albert Bridge, and part of the A38, a main road between the two counties.
North Queensferry is a historic coastal village in Fife, Scotland, situated on the Firth of Forth, 9 mi (14 km) from Edinburgh city centre. Located on the North Queensferry Peninsula, it is the southernmost settlement in Fife.
Queensferry, also called South Queensferry or simply "The Ferry", is a town to the west of Edinburgh, Scotland. Traditionally a royal burgh of West Lothian, it is now administered by the City of Edinburgh Council. It lies ten miles to the north-west of Edinburgh city centre, on the shore of the Firth of Forth between the Forth Bridge, Forth Road Bridge and the Queensferry Crossing.
The M90 is a motorway in Scotland. It runs from Junction 1A of the M9 motorway, south of the Queensferry Crossing, to Perth. It is the northernmost motorway in the United Kingdom. The northern point goes to the western suburbs of Perth at Broxden. A small part of the M90 was originally numbered as the M85 motorway.
Rosyth is a town and Garden City in Fife, Scotland, on the coast of the Firth of Forth.
The Skye Bridge is a road bridge over Loch Alsh, Scotland, connecting the Isle of Skye to the island of Eilean Bàn. The name is also used for the whole Skye Crossing, which further connects Eilean Bàn to the mainland across the Carrich Viaduct. The crossing forms part of the A87.
Stagecoach East Scotland is a bus operator providing services in eastern Scotland, with its regional base in Dunfermline, Fife. The company is a subsidiary of the Stagecoach Group.
The Erskine Bridge is a multi span cable-stayed box girder bridge spanning the River Clyde in west central Scotland. The bridge connects West Dunbartonshire with Renfrewshire and can be used by all types of motor vehicles, cyclists and pedestrians. As well as crossing the Clyde, the bridge also crosses the Forth and Clyde Canal and the North Clyde railway line. A small part of Kilpatrick railway station is situated underneath the bridge at the north side. The bridge is part of the A898 road. On completion the bridge replaced the Erskine to Old Kilpatrick ferry service.
The Fife Circle Line is the local rail service north from Edinburgh. It links towns of south Fife and the coastal towns along the Firth of Forth before heading to Edinburgh. Operationally, the service is not strictly a circle route, but, rather, a point to point service that reverses at the Edinburgh end, and has a large bi-directional balloon loop at the Fife end.
The Forth Estuary Transport Authority (FETA) was the authority responsible for the maintenance of the Forth Road Bridge over the Firth of Forth in eastern central Scotland. FETA was created in 2001 by the Transport (Scotland) Act 2001 - to replace the Forth Road Bridge Joint Board.
The Severn Bridge is a motorway suspension bridge that spans the River Severn between South Gloucestershire in England and Monmouthshire in South East Wales. It is the original Severn road crossing between England and Wales, and took three and a half years to build, at a cost of £8 million. It replaced the 137-year-old Aust Ferry.
Edinburgh is a major transport hub in east central Scotland and is at the centre of a multi-modal transport network with road, rail and air communications connecting the city with the rest of Scotland and internationally.
The B800 is a short road in eastern Scotland, connecting the Forth Road Bridge to Kirkliston. It is a two-way single carriageway road.
The Clackmannanshire Bridge is a road bridge over the Firth of Forth in Scotland which opened to traffic on 19 November 2008. Prior to 1 October 2008 the bridge was referred to as the upper Forth crossing while the name was chosen.
The Queensferry Crossing is a road bridge in Scotland. It was built alongside the existing Forth Road Bridge and the Forth Bridge. It carries the M90 motorway across the Firth of Forth between Edinburgh, at South Queensferry, and Fife, at North Queensferry.
The Forth Bridge is a cantilever railway bridge across the Firth of Forth in the east of Scotland, 9 miles west of central Edinburgh. Completed in 1890, it is considered a symbol of Scotland, and is a UNESCO World Heritage Site. It was designed by English engineers Sir John Fowler and Sir Benjamin Baker. It is sometimes referred to as the Forth Rail Bridge, although this is not its official name.
Trinity Chain Pier, originally called Trinity Pier of Suspension, was built in Trinity, Edinburgh, Scotland in 1821. The pier was designed by Samuel Brown, a pioneer of chains and suspension bridges. It was intended to serve ferry traffic on the routes between Edinburgh and the smaller ports around the Firth of Forth, and was built during a time of rapid technological advance. It was well used for its original purpose for less than twenty years before traffic was attracted to newly developed nearby ports, and it was mainly used for most of its life for sea bathing. It was destroyed by a storm in 1898; a building at the shore end survives, much reconstructed, as a pub and restaurant called the Old Chain Pier.
The Dunfermline and Queensferry Railway was a railway company founded to form part of a rail and ferry route between Dunfermline and Edinburgh, in Scotland. It was authorised in 1873 and its promoters had obtained informal promises from the larger North British Railway that the NBR would provide financial help, and also operate the ferry and the necessary railway on the southern side of the Firth of Forth.
Traffic: Each year, almost 24 million vehicles cross the bridge. Statistics show that, typically, 2% more vehicles head south than north.
{{cite web}}
: CS1 maint: numeric names: authors list (link)