The oxygen-burning process is a set of nuclear fusion reactions that take place in massive stars that have used up the lighter elements in their cores. Oxygen-burning is preceded by the neon-burning process and succeeded by the silicon-burning process. As the neon-burning process ends, the core of the star contracts and heats until it reaches the ignition temperature for oxygen burning. Oxygen burning reactions are similar to those of carbon burning; however, they must occur at higher temperatures and densities due to the larger Coulomb barrier of oxygen.
Oxygen ignites in the temperature range of (1.5–2.6)×109 K [1] and in the density range of (2.6–6.7)×1012 kg·m−3. [2] The principal reactions are given below, [3] [4] where the branching ratios assume that the deuteron channel is open (at high temperatures): [3]
16 8O | + | 16 8O | → | 28 14Si | + | 4 2He | + | 9.593 MeV (34%) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
→ | 31 15P | + | 1 1H | + | 7.676 MeV (56%) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
→ | 31 16S | + | n | + | 1.459 MeV (5%) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
→ | 30 14Si | + | 2 1 1H | + | 0.381 MeV | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
→ | 30 15P | + | 2 1D | − | 2.409 MeV (5%) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alternatively: [5] [6] [7] [8] [9] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
→ | 32 16S | + | γ | + | 16.539 MeV | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
→ | 24 12Mg | + | 2 4 2He | − | 0.393 MeV |
Near 2×109 K, the oxygen-burning reaction rate is approximately 2.8×10−12(T9/2)33[ clarification needed ], [3] [5] where T9 is the temperature in billion kelvins. Overall, the major products of the oxygen-burning process are [3] 28Si, 32,33,34S, 35,37Cl, 36,38Ar, 39,41K, and 40,42Ca. Of these, 28Si and 32S constitute 90% of the final composition. [3] The oxygen fuel within the core of the star is exhausted after 0.01–5 years, depending on the star's mass and other parameters. [1] [3] The silicon-burning process, which follows, creates iron, but this iron cannot react further to create energy to support the star.
During the oxygen-burning process, proceeding outward, there is an oxygen-burning shell, followed by a neon shell, a carbon shell, a helium shell, and a hydrogen shell. The oxygen-burning process is the last nuclear reaction in the star's core which does not proceed via the alpha process.
Although 16O is lighter than neon, neon burning occurs before oxygen burning, because 16O is a doubly-magic nucleus and hence extremely stable. Compared to oxygen, neon is much less stable. As a result, neon burning occurs at lower temperatures than 16O + 16O. [9] During neon burning, oxygen and magnesium accumulate in the core of the star. At the onset of oxygen burning, oxygen in the stellar core is plentiful due to the helium-burning process (4He(2α,γ)12C(α,γ)16O), carbon-burning process (12C(12C,α)20Ne, 12C(α,γ)16O), and neon-burning process (20Ne(γ,α)16O). The reaction 12C(α,γ)16O has a significant effect on the reaction rates during oxygen burning, as it produces large quantities of 16O. [3]
For stars with masses greater than 10.3 solar masses, oxygen ignites in the core or not at all. Similarly, for stars with a mass of less than 9 solar masses (without accretion of additional mass) oxygen ignites in the core or not at all. However, in the 9–10.3 solar mass range, oxygen ignites off-center.
For stars in this mass range neon-burning occurs in a convective envelope rather than at the core of the star. For the particular example of a 9.5 solar mass star, the neon-burning process takes place in an envelope of approximately 0.252 solar masses (~1560 kilometers) off center. From the ignition flash, the neon convective zone extends further out to 1.1 solar masses with a peak power around 1036 W. After only a month, the power declines to about 1035 W and stays at this rate for about 10 years. After this phase, the neon in the shell is depleted, resulting in greater inward pressure on the star. This raises the shell's temperature to 1.65 billion kelvins. This results in a neon-burning, convectively-bound flame front that moves toward the core. The motion of the flame is what eventually leads to oxygen-burning. In approximately 3 years, the flame's temperature reaches about 1.83 billion kelvins, enabling the oxygen-burning process to commence. This occurs around 9.5 years before the iron core develops. Similarly to the beginning of neon-burning, off-center oxygen-burning commences with another flash. The convectively burning flame then results from both neon and oxygen burning as it advances towards the core, while the oxygen-burning shell continuously shrinks in mass. [8]
During the oxygen-burning process, energy loss due to neutrino emission becomes relevant. Due to the large energy loss, oxygen must burn at temperatures higher than a billion kelvins in order to maintain a radiation pressure strong enough to support the star against gravity. Further, two electron capture reactions[ clarify ] (which produce neutrinos) become significant when the matter density is high enough (ρ > 2×107 g/cm3). Due to these factors, the timescale of oxygen burning is much shorter for heavy, dense stars. [7]
The oxygen-burning process can occur under hydrostatic and under explosive conditions. The products of explosive oxygen burning are similar to those in hydrostatic oxygen burning. However, stable oxygen burning is accompanied by a multitude of electron captures, while explosive oxygen burning is accompanied by a significantly greater presence of photodisintegration reactions. In the temperature range of (3–4)×109 K, photodisintegration and oxygen fusion occur with comparable reaction rates. [3]
Very massive (140–260 solar masses) population III stars may become unstable during core oxygen burning due to pair production. This results in a thermonuclear explosion, which completely disrupts the star. [2] [6]
The CNO cycle is one of the two known sets of fusion reactions by which stars convert hydrogen to helium, the other being the proton–proton chain reaction, which is more efficient at the Sun's core temperature. The CNO cycle is hypothesized to be dominant in stars that are more than 1.3 times as massive as the Sun.
A star is an astronomical object comprising a luminous spheroid of plasma held together by its gravity. The nearest star to Earth is the Sun. Many other stars are visible to the naked eye at night, but their immense distances from Earth make them appear as fixed points of light. The most prominent stars have been categorised into constellations and asterisms, and many of the brightest stars have proper names. Astronomers have assembled star catalogues that identify the known stars and provide standardized stellar designations. The observable universe contains an estimated 1022 to 1024 stars. Only about 4,000 of these stars are visible to the naked eye, all within the Milky Way galaxy.
Stellar evolution is the process by which a star changes over the course of time. Depending on the mass of the star, its lifetime can range from a few million years for the most massive to trillions of years for the least massive, which is considerably longer than the age of the universe. The table shows the lifetimes of stars as a function of their masses. All stars are formed from collapsing clouds of gas and dust, often called nebulae or molecular clouds. Over the course of millions of years, these protostars settle down into a state of equilibrium, becoming what is known as a main-sequence star.
Stellar nucleosynthesis is the creation (nucleosynthesis) of chemical elements by nuclear fusion reactions within stars. Stellar nucleosynthesis has occurred since the original creation of hydrogen, helium and lithium during the Big Bang. As a predictive theory, it yields accurate estimates of the observed abundances of the elements. It explains why the observed abundances of elements change over time and why some elements and their isotopes are much more abundant than others. The theory was initially proposed by Fred Hoyle in 1946, who later refined it in 1954. Further advances were made, especially to nucleosynthesis by neutron capture of the elements heavier than iron, by Margaret and Geoffrey Burbidge, William Alfred Fowler and Hoyle in their famous 1957 B2FH paper, which became one of the most heavily cited papers in astrophysics history.
Red supergiants (RSGs) are stars with a supergiant luminosity class of spectral type K or M. They are the largest stars in the universe in terms of volume, although they are not the most massive or luminous. Betelgeuse and Antares are the brightest and best known red supergiants (RSGs), indeed the only first magnitude red supergiant stars.
The carbon-burning process or carbon fusion is a set of nuclear fusion reactions that take place in the cores of massive stars (at least 8 at birth) that combines carbon into other elements. It requires high temperatures (> 5×108 K or 50 keV) and densities (> 3×109 kg/m3).
In astrophysics, silicon burning is a very brief sequence of nuclear fusion reactions that occur in massive stars with a minimum of about 8–11 solar masses. Silicon burning is the final stage of fusion for massive stars that have run out of the fuels that power them for their long lives in the main sequence on the Hertzsprung–Russell diagram. It follows the previous stages of hydrogen, helium, carbon, neon and oxygen burning processes.
A helium flash is a very brief thermal runaway nuclear fusion of large quantities of helium into carbon through the triple-alpha process in the core of low mass stars during their red giant phase. A much rarer runaway helium fusion process can also occur on the surface of accreting white dwarf stars.
A giant star is a star with substantially larger radius and luminosity than a main-sequence star of the same surface temperature. They lie above the main sequence on the Hertzsprung–Russell diagram and correspond to luminosity classes II and III. The terms giant and dwarf were coined for stars of quite different luminosity despite similar temperature or spectral type by Ejnar Hertzsprung about 1905.
Stellar structure models describe the internal structure of a star in detail and make predictions about the luminosity, the color and the future evolution of the star. Different classes and ages of stars have different internal structures, reflecting their elemental makeup and energy transport mechanisms.
The asymptotic giant branch (AGB) is a region of the Hertzsprung–Russell diagram populated by evolved cool luminous stars. This is a period of stellar evolution undertaken by all low- to intermediate-mass stars (about 0.5 to 8 solar masses) late in their lives.
A convection zone, convective zone or convective region of a star is a layer which is unstable due to convection. Energy is primarily or partially transported by convection in such a region. In a radiation zone, energy is transported by radiation and conduction.
A subgiant is a star that is brighter than a normal main-sequence star of the same spectral class, but not as bright as giant stars. The term subgiant is applied both to a particular spectral luminosity class and to a stage in the evolution of a star.
The neon-burning process is a set of nuclear fusion reactions that take place in evolved massive stars with at least 8 Solar masses. Neon burning requires high temperatures and densities (around 1.2×109 K or 100 keV and 4×109 kg/m3).
Supernova nucleosynthesis is the nucleosynthesis of chemical elements in supernova explosions.
Photodisintegration is a nuclear process in which an atomic nucleus absorbs a high-energy gamma ray, enters an excited state, and immediately decays by emitting a subatomic particle. The incoming gamma ray effectively knocks one or more neutrons, protons, or an alpha particle out of the nucleus. The reactions are called (γ,n), (γ,p), and (γ,α).
A red giant is a luminous giant star of low or intermediate mass in a late phase of stellar evolution. The outer atmosphere is inflated and tenuous, making the radius large and the surface temperature around 5,000 K or lower. The appearance of the red giant is from yellow-white to reddish-orange, including the spectral types K and M, sometimes G, but also class S stars and most carbon stars.
p-nuclei (p stands for proton-rich) are certain proton-rich, naturally occurring isotopes of some elements between selenium and mercury inclusive which cannot be produced in either the s- or the r-process.
A stellar core is the extremely hot, dense region at the center of a star. For an ordinary main sequence star, the core region is the volume where the temperature and pressure conditions allow for energy production through thermonuclear fusion of hydrogen into helium. This energy in turn counterbalances the mass of the star pressing inward; a process that self-maintains the conditions in thermal and hydrostatic equilibrium. The minimum temperature required for stellar hydrogen fusion exceeds 107 K (10 MK), while the density at the core of the Sun is over 100 g/cm3. The core is surrounded by the stellar envelope, which transports energy from the core to the stellar atmosphere where it is radiated away into space.
A super-AGB star is a star with a mass intermediate between those that end their lives as a white dwarf and those that end with a core collapse supernova, and properties intermediate between asymptotic giant branch (AGB) stars and red supergiants. They have initial masses of 7.5–9.25 M☉ in stellar-evolutionary models, but have exhausted their core hydrogen and helium, left the main sequence, and expanded to become large, cool, and luminous.