In astronomy, metallicity is the abundance of elements present in objects that are heavier than hydrogen and helium. Most of the normal currently detectable (i.e. non-dark) matter in the universe is either hydrogen or helium, and astronomers use the word "metals" as convenient shorthand for "all elements except hydrogen and helium". This word-use is distinct from the conventional chemical or physical definition of a metal as an electrically conducting solid. Stars and nebulae with relatively high abundances of heavier elements are called "metal-rich" when discussing metallicity, even though many of those elements are called nonmetals in chemistry.
In 1802, William Hyde Wollaston [1] noted the appearance of a number of dark features in the solar spectrum. [2] In 1814, Joseph von Fraunhofer independently rediscovered the lines and began to systematically study and measure their wavelengths, and they are now called Fraunhofer lines. He mapped over 570 lines, designating the most prominent with the letters A through K and weaker lines with other letters. [3] [4] [5]
About 45 years later, Gustav Kirchhoff and Robert Bunsen [6] noticed that several Fraunhofer lines coincide with characteristic emission lines identifies in the spectra of heated chemical elements. [7] They inferred that dark lines in the solar spectrum are caused by absorption by chemical elements in the solar atmosphere. [8] Their observations [9] were in the visible range where the strongest lines come from metals such as sodium, potassium, and iron. [10] In the early work on the chemical composition of the sun the only elements that were detected in spectra were hydrogen and various metals, [11] : 23–24 with the term metallic frequently used when describing them. [11] : Part 2 In contemporary usage in astronomy all the extra elements beyond just hydrogen and helium are termed metallic.
The presence of heavier elements results from stellar nucleosynthesis, where the majority of elements heavier than hydrogen and helium in the Universe (metals, hereafter) are formed in the cores of stars as they evolve. Over time, stellar winds and supernovae deposit the metals into the surrounding environment, enriching the interstellar medium and providing recycling materials for the birth of new stars. It follows that older generations of stars, which formed in the metal-poor early Universe, generally have lower metallicities than those of younger generations, which formed in a more metal-rich Universe.
Observed changes in the chemical abundances of different types of stars, based on the spectral peculiarities that were later attributed to metallicity, led astronomer Walter Baade in 1944 to propose the existence of two different populations of stars. [12] These became commonly known as population I (metal-rich) and population II (metal-poor) stars. A third, earliest stellar population was hypothesized in 1978, known as population III stars. [13] [14] [15] These "extremely metal-poor" (XMP) stars are theorized to have been the "first-born" stars created in the Universe.
Astronomers use several different methods to describe and approximate metal abundances, depending on the available tools and the object of interest. Some methods include determining the fraction of mass that is attributed to gas versus metals, or measuring the ratios of the number of atoms of two different elements as compared to the ratios found in the Sun.
Stellar composition is often simply defined by the parameters X, Y, and Z. Here X represents the mass fraction of hydrogen, Y is the mass fraction of helium, and Z is the mass fraction of all the remaining chemical elements. Thus
In most stars, nebulae, HII regions, and other astronomical sources, hydrogen and helium are the two dominant elements. The hydrogen mass fraction is generally expressed as where M is the total mass of the system, and is the mass of the hydrogen it contains. Similarly, the helium mass fraction is denoted as The remainder of the elements are collectively referred to as "metals", and the mass fraction of metals is calculated as
For the surface of the Sun (symbol ), these parameters are measured to have the following values: [16]
Description | Solar value |
---|---|
Hydrogen mass fraction | |
Helium mass fraction | |
Metal mass fraction |
Due to the effects of stellar evolution, neither the initial composition nor the present day bulk composition of the Sun is the same as its present-day surface composition.
The overall stellar metallicity is conventionally defined using the total hydrogen content, since its abundance is considered to be relatively constant in the Universe, or the iron content of the star, which has an abundance that is generally linearly increasing in time in the Universe. [17] Hence, iron can be used as a chronological indicator of nucleosynthesis. Iron is relatively easy to measure with spectral observations in the star's spectrum given the large number of iron lines in the star's spectra (even though oxygen is the most abundant heavy element – see metallicities in HII regions below). The abundance ratio is the common logarithm of the ratio of a star's iron abundance compared to that of the Sun and is calculated thus: [18]
where and are the number of iron and hydrogen atoms per unit of volume respectively, is the standard symbol for the Sun, and for a star (often omitted below). The unit often used for metallicity is the dex, contraction of "decimal exponent". By this formulation, stars with a higher metallicity than the Sun have a positive common logarithm, whereas those more dominated by hydrogen have a corresponding negative value. For example, stars with a value of +1 have 10 times the metallicity of the Sun (10+1); conversely, those with a value of −1 have 1/10, while those with a value of 0 have the same metallicity as the Sun, and so on. [19]
Young population I stars have significantly higher iron-to-hydrogen ratios than older population II stars. Primordial population III stars are estimated to have metallicity less than −6, a millionth of the abundance of iron in the Sun. [20] [21] The same notation is used to express variations in abundances between other individual elements as compared to solar proportions. For example, the notation represents the difference in the logarithm of the star's oxygen abundance versus its iron content compared to that of the Sun. In general, a given stellar nucleosynthetic process alters the proportions of only a few elements or isotopes, so a star or gas sample with certain values may well be indicative of an associated, studied nuclear process.
Astronomers can estimate metallicities through measured and calibrated systems that correlate photometric measurements and spectroscopic measurements (see also Spectrophotometry). For example, the Johnson UVB filters can be used to detect an ultraviolet (UV) excess in stars, [22] where a smaller UV excess indicates a larger presence of metals that absorb the UV radiation, thereby making the star appear "redder". [23] [24] [25] The UV excess, δ(U−B), is defined as the difference between a star's U and B band magnitudes, compared to the difference between U and B band magnitudes of metal-rich stars in the Hyades cluster. [26] Unfortunately, δ(U−B) is sensitive to both metallicity and temperature: If two stars are equally metal-rich, but one is cooler than the other, they will likely have different δ(U−B) values [26] (see also Blanketing effect [27] [28] ). To help mitigate this degeneracy, a star's B−V color index can be used as an indicator for temperature. Furthermore, the UV excess and B−V index can be corrected to relate the δ(U−B) value to iron abundances. [29] [30] [31]
Other photometric systems that can be used to determine metallicities of certain astrophysical objects include the Strӧmgren system, [32] [33] the Geneva system, [34] [35] the Washington system, [36] [37] and the DDO system. [38] [39]
At a given mass and age, a metal-poor star will be slightly warmer. Population II stars' metallicities are roughly 1/1000 to 1/10 of the Sun's but the group appears cooler than population I overall, as heavy population II stars have long since died. Above 40 solar masses, metallicity influences how a star will die: Outside the pair-instability window, lower metallicity stars will collapse directly to a black hole, while higher metallicity stars undergo a type Ib/c supernova and may leave a neutron star.
A star's metallicity measurement is one parameter that helps determine whether a star may have a giant planet, as there is a direct correlation between metallicity and the presence of a giant planet. Measurements have demonstrated the connection between a star's metallicity and gas giant planets, like Jupiter and Saturn. The more metals in a star and thus its planetary system and protoplanetary disk, the more likely the system may have gas giant planets. Current models show that the metallicity along with the correct planetary system temperature and distance from the star are key to planet and planetesimal formation. For two stars that have equal age and mass but different metallicity, the less metallic star is bluer. Among stars of the same color, less metallic stars emit more ultraviolet radiation. The Sun, with eight planets and nine consensus dwarf planets, is used as the reference, with a of 0.00. [40] [41] [42] [43] [44]
Young, massive and hot stars (typically of spectral types O and B) in HII regions emit UV photons that ionize ground-state hydrogen atoms, knocking electrons free; this process is known as photoionization. The free electrons can strike other atoms nearby, exciting bound metallic electrons into a metastable state, which eventually decay back into a ground state, emitting photons with energies that correspond to forbidden lines. Through these transitions, astronomers have developed several observational methods to estimate metal abundances in HII regions, where the stronger the forbidden lines in spectroscopic observations, the higher the metallicity. [45] [46] These methods are dependent on one or more of the following: the variety of asymmetrical densities inside HII regions, the varied temperatures of the embedded stars, and/or the electron density within the ionized region. [47] [48] [49] [50]
Theoretically, to determine the total abundance of a single element in an HII region, all transition lines should be observed and summed. However, this can be observationally difficult due to variation in line strength. [51] [52] Some of the most common forbidden lines used to determine metal abundances in HII regions are from oxygen (e.g. [OII] λ = (3727, 7318, 7324) Å, and [OIII] λ = (4363, 4959, 5007) Å), nitrogen (e.g. [NII] λ = (5755, 6548, 6584) Å), and sulfur (e.g. [SII] λ = (6717, 6731) Å and [SIII] λ = (6312, 9069, 9531) Å) in the optical spectrum, and the [OIII] λ = (52, 88) μm and [NIII] λ = 57 μm lines in the infrared spectrum. Oxygen has some of the stronger, more abundant lines in HII regions, making it a main target for metallicity estimates within these objects. To calculate metal abundances in HII regions using oxygen flux measurements, astronomers often use the R23 method, in which
where is the sum of the fluxes from oxygen emission lines measured at the rest frame λ = (3727, 4959 and 5007) Å wavelengths, divided by the flux from the Balmer series Hβ emission line at the rest frame λ = 4861 Å wavelength. [53] This ratio is well defined through models and observational studies, [54] [55] [56] but caution should be taken, as the ratio is often degenerate, providing both a low and high metallicity solution, which can be broken with additional line measurements. [57] Similarly, other strong forbidden line ratios can be used, e.g. for sulfur, where [58]
Metal abundances within HII regions are typically less than 1%, with the percentage decreasing on average with distance from the Galactic Center. [51] [59] [60] [61] [62]
The Eddington luminosity, also referred to as the Eddington limit, is the maximum luminosity a body can achieve when there is balance between the force of radiation acting outward and the gravitational force acting inward. The state of balance is called hydrostatic equilibrium. When a star exceeds the Eddington luminosity, it will initiate a very intense radiation-driven stellar wind from its outer layers. Since most massive stars have luminosities far below the Eddington luminosity, their winds are driven mostly by the less intense line absorption. The Eddington limit is invoked to explain the observed luminosities of accreting black holes such as quasars.
In 1944, Walter Baade categorized groups of stars within the Milky Way into stellar populations. In the abstract of the article by Baade, he recognizes that Jan Oort originally conceived this type of classification in 1926.
A subdwarf, sometimes denoted by "sd", is a star with luminosity class VI under the Yerkes spectral classification system. They are defined as stars with luminosity 1.5 to 2 magnitudes lower than that of main-sequence stars of the same spectral type. On a Hertzsprung–Russell diagram subdwarfs appear to lie below the main sequence.
18 Scorpii is a solitary star located at a distance of some 46.1 light-years from the Sun at the northern edge of the Scorpius constellation. It has an apparent visual magnitude of 5.5, which is bright enough to be seen with the naked eye outside of urban areas. The star is drifting further away with a radial velocity of +11.6.
A galactic disc is a component of disc galaxies, such as spiral galaxies like the Milky Way and lenticular galaxies. Galactic discs consist of a stellar component and a gaseous component. The stellar population of galactic discs tend to exhibit very little random motion with most of its stars undergoing nearly circular orbits about the galactic center. Discs can be fairly thin because the disc material's motion lies predominantly on the plane of the disc. The Milky Way's disc, for example, is approximately 1 kly thick, but thickness can vary for discs in other galaxies.
The red clump is a clustering of red giants in the Hertzsprung–Russell diagram at around 5,000 K and absolute magnitude (MV) +0.5, slightly hotter than most red-giant-branch stars of the same luminosity. It is visible as a denser region of the red-giant branch or a bulge towards hotter temperatures. It is prominent in many galactic open clusters, and it is also noticeable in many intermediate-age globular clusters and in nearby field stars.
Sigma Boötis, its name Latinized from σ Boötis, is a single star in the northern constellation of Boötes. It has a yellow-white hue and is visible to the naked eye with an apparent visual magnitude of 4.46. Located to the southeast of Rho Boötis, the dwarf Sigma may at first appear as a naked-eye double, but the angular proximity with Rho is merely line-of-sight. Sigma Boötis is located at a distance of 51.1 light years from the Sun based on parallax. The star has a relatively high proper motion and is traversing the sky at the rate of 0.230″ yr−1.
In astronomy, the initial mass function (IMF) is an empirical function that describes the initial distribution of masses for a population of stars during star formation. IMF not only describes the formation and evolution of individual stars, it also serves as an important link that describes the formation and evolution of galaxies.
NGC 1427 is a low-luminosity elliptical galaxy located approximately 71 million light-years away from Earth. It was discovered by John Frederick William Herschel on November 28, 1837. It is a member of the Fornax Cluster. The galaxy has a stellar mass of 7.9 × 1010M☉, and a total mass of 9.4 × 1010M☉. However, the mass of the dark matter halo surrounding the galaxy is around 4.3 × 1012M☉.
HD 20782 is the primary of a wide binary system located in the southern constellation Fornax. It has an apparent magnitude of 7.38, making it readily visible in binoculars but not to the naked eye. The system is located relatively close at a distance of 117 light-years based on Gaia DR3 parallax measurements, but it is receding with a heliocentric radial velocity of 40.7 km/s. At its current distance, HD 20782's brightness is diminished by 0.12 magnitudes due to interstellar extinction and it has an absolute magnitude of +4.61.
A super star cluster (SSC) is a very massive young open cluster that is thought to be the precursor of a globular cluster. These clusters called "super" because they are relatively more luminous and contain more mass than other young star clusters. The SSC, however, does not have to physically be larger than other clusters of lower mass and luminosity. They typically contain a very large number of young, massive stars that ionize a surrounding HII region or a so-called "Ultra dense HII region (UDHII)" in the Milky Way Galaxy or in other galaxies. An SSC's HII region is in turn surrounded by a cocoon of dust. In many cases, the stars and the HII regions will be invisible to observations in certain wavelengths of light, such as the visible spectrum, due to high levels of extinction. As a result, the youngest SSCs are best observed and photographed in radio and infrared. SSCs, such as Westerlund 1 (Wd1), have been found in the Milky Way Galaxy. However, most have been observed in farther regions of the universe. In the galaxy M82 alone, 197 young SSCs have been observed and identified using the Hubble Space Telescope.
2MASS J05325346+8246465 is possibly the first brown dwarf observed in the galactic halo of the Milky Way, and the first known substellar subdwarf star. It was discovered from Two Micron All-Sky Survey data, and verified by observations at Palomar Observatory and W. M. Keck Observatory. It has a low metallicity, which indicates it is an old star.
Pi Hydrae, Latinized from π Hydrae, is a star in the constellation Hydra with an apparent visual magnitude of 3.3, making it visible to the naked eye. Parallax measurements put this star at a distance of about 101 light-years from the Earth.
Zeta Eridani is a binary star in the constellation of Eridanus. With an apparent visual magnitude of 4.80, it is visible to the naked eye on a clear dark night. Based on parallax measurements taken during the Hipparcos mission, it is approximately 110 light-years from the Sun.
The metallicity distribution function is an important concept in stellar and galactic evolution. It is a curve of what proportion of stars have a particular metallicity of a population of stars such as in a cluster or galaxy.
The Antlia-Sextans Group is a small Galaxy group in the constellations Hydra, Sextans, Antlia and Leo. It is, on average, approximately 4.3 million light-years away from the Milky Way. It is generally considered to be at the very edge of the Local Group and thus part of it. However, other researchers indicate it is an independent Galaxy group, unlikely to be gravitationally bound to the Local Group due to probably lying outside the Local Group's Zero-velocity surface, and thus the nearest Galaxy group to the Local Group rather than a subgroup within the Local Group. Nonetheless—this possible independence may disappear as the Milky Way continues coalescing with Andromeda due to the increased mass, and density thereof, plausibly widening the radius of the Zero-velocity surface of the Local Group.
The [α/Fe] versus [Fe/H] diagram is a type of graph commonly used in stellar and galactic astrophysics. It shows the logarithmic ratio number densities of diagnostic elements in stellar atmospheres compared to the solar value. The x-axis represents the abundance of iron (Fe) vs. hydrogen (H), that is, [Fe/H]. The y-axis represents the combination of one or several of the alpha process elements compared to iron (Fe), denoted as [α/Fe].
HD 27022, also known as HR 1327, is a star located in the northern circumpolar constellation Camelopardalis. The object has also been designated as 20 H. Camelopardalis, but is not commonly used in modern times. It has an apparent magnitude of 5.27, allowing it to be faintly visible to the naked eye. Based on parallax measurements from Gaia DR3, the star has been estimated to be 347 light years away. It appears to be approaching the Solar System, having a heliocentric radial velocity of −19.5 km/s.
NGC 6822-WR 12 is a WN-type Wolf-Rayet star located in the galaxy NGC 6822, about 1.54 million light years away in the constellation of Sagittarius. NGC 6822-WR 12 was the first Wolf-Rayet star to be discovered in the galaxy, and is one of only four known in the galaxy.
HD 193472 is a solitary star in the equatorial constellation Delphinus. It has an apparent magnitude of 5.94, making it visible with the naked eye if viewed under ideal conditions. Parallax measurements put it at a distance of 282 light years and has a radial velocity of −8 km/s, indicating that the object drifting towards the Solar System.