 | This article contains content that is written like an advertisement .(March 2013) |
Weightless was a set of low-power wide-area network (LPWAN) wireless technology specifications for exchanging data between a base station and many of machines around it.
Cambridge Wireless held an event at the Moller Centre in Cambridge, United Kingdom on September 30, 2011. Neul, Landis+Gyr, Cable & Wireless, and ARM Holdings provided presentations. The Weightless Special Interest Group promoted the technology (SIG), announced on December 7, 2012. The group was led by William Webb, a professor at Cambridge and a founder of the company Neul. A subsequent event was held in September 2013, when version 1.0 was published.
The name Weightless was chosen to reflect the intention at a low overhead per transmission for devices that need to communicate just a low amounts of data. The Weightless logo appears in uppercase letters with the 'W' appearing in the top-right corner of a light blue box with a solid blue line above it.
In September 2014, Neul was acquired by Huawei for an estimated $25 million. By 2015, the company Nwave Technologies announced deployments in Copenhagen, Denmark, and Esbjerg, Denmark. However, observers noted no products on the market. A company called Ubiik, based in Taiwan, announced pre-orders in 2017.
Weightless-N uses a differential binary phase shift keying (DBPSK) digital modulation scheme to transmit within narrow frequency bands using a frequency hopping algorithm for interference mitigation and enhanced security. It provides encryption and implicit authentication using a shared secret key regime to encode transmitted information via a 128-bit AES algorithm. The technology supports mobility with the network automatically routing terminal messages to the correct destination. Multiple networks, typically operated by different companies, are enabled and can be co-located. Each base station queries a central database to determine which network the terminal is registered to decode and route data accordingly.
Weightless-W uses time-division duplex operation with frequency hopping and variable spreading factors to increase range and accommodate low-power devices in frequency bands, or channels, within the terrestrial television broadcast band. Channels used by a nearby television transmitter are identified and left unaffected, while channels not being used for broadcasting television can be allocated for use by Weightless devices. [1]
A network of base stations communicates with the Internet, or a private network, to pass information from devices to a computer system; and data back to the devices. The downlink to devices uses time slots (TDMA), and the uplink to the base station is divided into sub-channels so that several devices can communicate with the base station.
Initially, there were three published Weightless connectivity standards Weightless-P, Weightless-N, and Weightless-W. Weightless-N was an uplink-only LPWAN technology. Weightless W was designed to operate in the TV whitespace. Weightless-P, with bi-directional, narrowband technology intended to be operated in licensed and unlicensed ISM frequencies, was then just called "Weightless." [2]
A base station transmits a Weightless frame received by a few thousand devices. The devices are allocated a specific time and frequency to transfer their data back to the base station. The base station is connected to the Internet or a private network. The base station accesses a database to identify the frequencies or channels that it can use without interfering with terrestrial television broadcasts in its local area. [3]
Weightless is a wireless communications protocol for machine-to-machine (M2M) communications known as the Internet of things (IoT) – over distances ranging from a few meters to about 10 km. [4]
Other technologies which use the channels not used for terrestrial television broadcast in a particular area are also said to be in development. One is Wi-Fi under the standard IEEE 802.11af. The IEEE 802.22 standard defines a MAC and PHY layer for TV white spaces that comply with the FCC and international standards for broadcasting in this spectrum. It also defines a general protocol model for negotiating and selecting a shared spectrum band for device operation. A Weightless Radio implementation would comply with this standard to cooperatively share the available spectrum.
The original Weightless specification was developed for machine-to-machine, low-cost, low-power communication system for use in the white space between TV channels in 2011 by engineers working at Neul in Cambridge, UK. [6] The Weightless-W specification is based on time-division duplex technology with spread spectrum frequency hopping in an attempt to minimise the impact of interference and with variable spreading factors in an attempt to increase range (at the expense of lower data rate) and to accommodate low power devices with low data rates.
The formal Weightless-W Standard was published in February 2013. The Weightless-N Standard was published in May 2015. For networks using Weightless-W technology, a base station queries a database which identifies the channels that are being used for terrestrial television broadcast in its local area. The channels not in use – the so-called white space – can be used by the base station to communicate with terminals using the Weightless-W protocol. Terminal endpoints were designed to be low-cost devices using minimal power so that they could work autonomously for up to several years. [7]
The Weightless-W protocol operates in the TV channels band. The Weightless-W protocol divides the band into channels. A database is queried by a base station to determine which channels are in use by terrestrial television broadcast stations in the area, and which ones are free for use by white space devices (such as those using Weightless). A range of modulation and encoding techniques are used to permit each base station to communicate at a variety of speeds with terminals, some of which may be nearby and others several km away. Data rates may vary depending on the distance and the presence of radio interference – the typical range is alleged to be between about 0.1 Mbit/s and 16 Mbit/s. The design of the air interface and protocol minimises the costs of the equipment and its power consumption. A broadband downlink from a base station to a terminal uses single carrier in an unused 6 MHz (for US) or 8 MHz (for UK) TV channel. [8]
Digital Enhanced Cordless Telecommunications (DECT) is a cordless telephony standard maintained by ETSI. It originated in Europe, where it is the common standard, replacing earlier standards, such as CT1 and CT2. Since the DECT-2020 standard, it also includes IoT communication.
A personal area network (PAN) is a computer network for interconnecting electronic devices within an individual person's workspace. A PAN provides data transmission among devices such as computers, smartphones, tablets and personal digital assistants. PANs can be used for communication among the personal devices themselves, or for connecting to a higher level network and the Internet where one master device takes up the role as gateway.
A wireless network is a computer network that uses wireless data connections between network nodes. Wireless networking allows homes, telecommunications networks and business installations to avoid the costly process of introducing cables into a building, or as a connection between various equipment locations. Admin telecommunications networks are generally implemented and administered using radio communication. This implementation takes place at the physical level (layer) of the OSI model network structure.
Wi-Fi is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks, used globally in home and small office networks to link devices and to provide Internet access with wireless routers and wireless access points in public places such as coffee shops, hotels, libraries, and airports to provide visitors.
Zigbee is an IEEE 802.15.4-based specification for a suite of high-level communication protocols used to create personal area networks with small, low-power digital radios, such as for home automation, medical device data collection, and other low-power low-bandwidth needs, designed for small scale projects which need wireless connection. Hence, Zigbee is a low-power, low-data-rate, and close proximity wireless ad hoc network.
IEEE 802.22, is a standard for wireless regional area network (WRAN) using white spaces in the television (TV) frequency spectrum. The development of the IEEE 802.22 WRAN standard is aimed at using cognitive radio (CR) techniques to allow sharing of geographically unused spectrum allocated to the television broadcast service, on a non-interfering basis, to bring broadband access to hard-to-reach, low population density areas, typical of rural environments, and is therefore timely and has the potential for a wide applicability worldwide. It is the first worldwide effort to define a standardized air interface based on CR techniques for the opportunistic use of TV bands on a non-interfering basis.
Machine to machine (M2M) is direct communication between devices using any communications channel, including wired and wireless. Machine to machine communication can include industrial instrumentation, enabling a sensor or meter to communicate the information it records to application software that can use it. Such communication was originally accomplished by having a remote network of machines relay information back to a central hub for analysis, which would then be rerouted into a system like a personal computer.
6LoWPAN was a working group of the Internet Engineering Task Force (IETF). It was created with the intention of applying the Internet Protocol (IP) even to the smallest devices, enabling low-power devices with limited processing capabilities to participate in the Internet of Things.
A wide variety of different wireless data technologies exist, some in direct competition with one another, others designed for specific applications. Wireless technologies can be evaluated by a variety of different metrics of which some are described in this entry.
Bluetooth Low Energy is a wireless personal area network technology designed and marketed by the Bluetooth Special Interest Group aimed at novel applications in the healthcare, fitness, beacons, security, and home entertainment industries. Compared to Classic Bluetooth, Bluetooth Low Energy is intended to provide considerably reduced power consumption and cost while maintaining a similar communication range.
DASH7 Alliance Protocol (D7A) is an open-source wireless sensor and actuator network protocol, which operates in the 433 MHz, 868 MHz and 915 MHz unlicensed ISM/SRD band. DASH7 provides multi-year battery life, range of up to 2 km, low latency for connecting with moving things, a very small open-source protocol stack, AES 128-bit shared-key encryption support, and data transfer of up to 167 kbit/s. The DASH7 Alliance Protocol is the name of the technology promoted by the non-profit consortium called the DASH7 Alliance.
IEEE 802.11ah is a wireless networking protocol published in 2017 called Wi-Fi HaLow as an amendment of the IEEE 802.11-2007 wireless networking standard. It uses 900 MHz license-exempt bands to provide extended-range Wi-Fi networks, compared to conventional Wi-Fi networks operating in the 2.4 GHz, 5 GHz and 6 GHz bands. It also benefits from lower energy consumption, allowing the creation of large groups of stations or sensors that cooperate to share signals, supporting the concept of the Internet of things (IoT). The protocol's low power consumption competes with Bluetooth, LoRa, and Zigbee, and has the added benefit of higher data rates and wider coverage range.
DECT Ultra Low Energy is a wireless communication standard used to design wireless sensor and actuator networks for smart home applications. DECT ULE originated from the DECT and NG-DECT (Cat-iq) technology. DECT ULE devices are used in home automation, home security, and climate control.
A low-power, wide-area network is a type of wireless telecommunication wide area network designed to allow long-range communication at a low bit rate between IoT devices, such as sensors operated on a battery.
Link Labs is an American company based in Annapolis, Maryland, that develops computer network technology for business and industrial customers. Link Labs technologies are marketed for Internet of things (IoT) applications and devices.
LoRa is a physical proprietary radio communication technique. It is based on spread spectrum modulation techniques derived from chirp spread spectrum (CSS) technology. It was developed by Cycleo, a company of Grenoble, France, and patented in 2014. Cycleo was later acquired by Semtech.
IO-Link is a short distance, bi-directional, digital, point-to-point, wired, industrial communications networking standard used for connecting digital sensors and actuators to either a type of industrial fieldbus or a type of industrial Ethernet. Its objective is to provide a technological platform that enables the development and use of sensors and actuators that can produce and consume enriched sets of data that in turn can be used for economically optimizing industrial automated processes and operations. The technology standard is managed by the industry association Profibus and Profinet International.
Wize technology is a low-power wide-area network technology using the 169 MHz radio frequency. It was created by the Wize Alliance in 2017. Derived from the European Standard Wireless M-Bus, it has mainly been used by utility companies for smart metering infrastructures (AMI) for gas, water and electricity but is equally open to other applications in industry and 'Smart City' spaces.
mioty is a low-power wide-area network (LPWAN) protocol. It is using telegram splitting, a standardized LPWAN technology in the license-free spectrum. This technology splits a data telegram into multiple sub packets and sends them after applying error correcting codes, in a partly predefined time and frequency pattern. This makes a transmission robust to interferences and packet collisions. It is standardised in the TS 103 357 ETSI. Its uplink operates at the 868 MHz band, license free in Europe, and 916MHz band in North America. It requires a bandwidth of 200 kHz for two channels.
Static Context Header Compression(SCHC) is a standard compression and fragmentation mechanism defined in the IPv6 over LPWAN working group at the IETF. It offers compression and fragmentation of IPv6/UDP/CoAP packets to allow their transmission over the Low-Power Wide-Area Networks (LPWAN).
