Geobotanical prospecting refers to prospecting based on the composition and health of surrounding botanical life to identify potential resource deposits. [1] Using a variety of techniques, including indicator plant identification, [2] remote sensing [3] and determining the physical and chemical condition of the botanical life in the area, [4] [5] geobotanical prospecting can be used to discover different minerals. This process has clear advantages and benefits, such as being relatively non-invasive and cost efficient. [2] [3] However, the efficacy of this method is not without question. There is evidence that this form of prospecting is a valid scientific method, especially when used in conjunction with other prospecting methods. [6] [2] But as identification of commercial mines are invariably guided by geological principles and confirmed by chemical assays, it is unclear as to whether this prospecting method is a valid standalone scientific method or an outdated method of the past. [7]
There is a complex interaction between soil and plants. [8] The nutrient and mineral composition of the soil heavily influences both the type and physical condition of botanical life it can support. [8] [9] Using this principle, in certain cases, it is theoretically possible to determine the mineral content of the underlying soils and rocks (i.e., mineral deposits) using the overlying botanical life. [10]
In 2015, Stephen E. Haggerty identified Pandanus candelabrum as a botanical indicator for kimberlite pipes, a source of mined diamonds. [6]
The technique has been used in China since in the 5th century BC. People in the region noticed a connection between vegetation and the minerals located underground. There were particular plants that throve on and indicated areas rich in copper, nickel, zinc, and allegedly gold though the latter has not been confirmed. The connection arose out of an agricultural interest concerning soil compositions. While the process had been known to the Chinese region since antiquity, it was not written about and studied in the west until the 18th century in Italy. [11]
Geobotanical prospecting can be done through a variety of different methods. Any method that uses the overlying botanical life (in any way) as an indication of the underlying mineral composition can be considered geobotanical prospecting. [12] These methods can include indicator plant identification, [2] remote sensing, [3] and determining the physical and chemical condition of the botanical life through laboratory techniques. [13] [5]
Indicator plant identification is determining the presence and distribution of certain indicator plants. [2] Certain plants prefer certain concentrations of minerals in the soil and would thus be more plentiful in areas with higher concentrations of their preferred mineral. [2] [1] By mapping the distribution of indicator plants, it is possible to get an overview of the geology of the area. [2]
For example, the Viscaria Mine in Sweden was named after the plant Silene suecica (syn. Viscaria alpina ) that was used by prospectors to discover the ore deposits. [14]
Aerial photography is simply taking photographs of the ground from a higher elevation. [3] Using aerial photography it is possible to survey a large area of land relatively quickly at relatively low cost to get an overview of the plant diversity of an area. [3] This can lead to the mapping of underlying mineral deposits. [2] [3]
For example, using aerial photography, it is possible to determine the existence of premature leaf senescence (premature aging of cells). [3] In some cases, this can lead to the detection of increased copper concentrations in the soil, leading to the discovery of copper deposits. [3]
Satellite imagery can be used to capture large amounts of data in a large area. [15] This data, when analyzed correctly, can be used to aid in the geobotanical prospecting process. [15] [16] Satellite imagery can be used to determine concentrations of certain minerals and elements in certain plants. [17] For example, satellite imagery has been used to determine potassium concentrations in tea plants. [17] Satellite imagery has also been used to monitor invasive plant movement. [18] Using satellite imagery, it is possible to get a detailed image of the overlying botanical life. [15] [16] Using the overlying botanical life it is possible to get a overview of the underlying geological composition. [10] [15]
As plants uptake minerals from their surrounding soils, the minerals get deposited into their tissues. [5] In a laboratory setting, plant tissues can be analyzed to determine the concentrations of these minerals. [19] Once the concentrations of these minerals are known, it is possible to determine the concentrations of minerals in these plants soils and thus the underlying geology of the area. [10] This method is particularly useful for nanoparticles i.e., particles that are too low in concentration to detect in soils but get fixed in plant tissue. [20] This is the case when prospecting for gold. [21]
Using the botanical life in the area to determine the underlying geological composition has been used in a variety of ways and for a variety of minerals. [1]
Copper (Cu) is an essential micronutrient that plants absorb from the soil. [22] Copper that is absorbed from the soil is used in various internal process such as photosynthesis, plant respiration and enzyme function. [23] However, increased concentrations of copper can lead to copper toxicity or copper mineralization in the plant, causing specific physiological responses. [24] This mineralization can then be detected through geobotanical surveys. [24]
Geobotanical prospecting for copper generally takes the form of identifying indicator plants, i.e., metallophyte species. [25] Metallophytes are plants that can tolerate high levels of heavy metals in the soils such as copper. [26] These metallophyte species can show symptoms of copper toxicity that can be detected through geobotanical methods like remote sensing or field surveys. [3] These symptoms of copper toxicity can include altered photosynthesis cycles, stunted growth, discoloration and inhibition of root growth. [27] [28]
Some popular examples of copper indicator plants include the Zambian copper flower Becium centraliafricanum, [29] Huumaniastrum kutungense, [30] [7] and Ocimum centraliafricanum A "most faithful" indicator plant, the "copper plant" or "copper flower" formerly known as Becium homblei, found only on copper (and nickel) rich soils in central to southern Africa. [31] [30] Lichens (Lecanora cascadensis) have also been used to determine copper mineralization. [32]
Geobotanical surveys for copper are most likely to consist of a variation of methods such as field observations and remote sensing (aerial photography and satellite imagery). [3] [15] After potential copper rich areas are discovered through the methods such as those listed above, further exploration techniques can be used to confirm the presence of mineral deposits. [3] These exploration techniques can include soil sampling and geochemical analysis, [33] [34] geophysical surveys and drilling. [35] [36] Geobotanical prospecting is a useful first step in the prospecting process for copper deposits, and its full potential can be reached when used in conjunction with other prospecting methods. [36] [37]
Prospecting for gold using geobotanical methods usually involves determining the gold content that has been absorbed by botanical life. [21] However, because the gold content in soils and in the corresponding vegetation is usually very low (practically undetectable), direct measuring of gold is unlikely to be effective. [38] [39] To overcome this obstacle, detecting a suitable pathfinder mineral is the method usually employed. [21] Pathfinder minerals (a mineral that almost always occurs in conjunction with another mineral) most commonly associated with gold is Arsenic. [40] As for which plants are most likely to contain elevated levels of gold, shrubs from the genus Artemisia (sagebrush or wormwood) are recommended. [39]
Research has been ongoing for many years on the interaction between gold and vegetation. [10] [41] These new methods could increase the accuracy of gold detection in vegetation. [41] However, presently because of the difficulties in identifying gold contained within vegetation, geobotanical prospecting for gold is most effective when combined with other prospecting methods like geophysical surveys. [42] [35]
Uranium is not an essential nutrient to plants, but if uranium is present in the surrounding soils the element will be taken up into the plant system. [8] Uranium is toxic to plants due to its radioactive nature. [43] Plants that have accumulated a larger than normal amount of uranium, will show signs of uranium toxicity. [44] Uranium toxicity results in various physiological processes of the plants being hindered. [44] [45] These hindered physiological processes include seed germination and photosynthesis.[ citation needed ] Because of these changes in physiology, uranium toxicity is relatively easy to detect in plants. [43]
Plants that generally show increased uranium levels are bryophytes. [46] Bryophytes include plants such as mosses and liverworts. [47] Some other indicator plants include Aster venustns, and Astragalns albulus. [7]
Geobotanical prospecting for uranium deposits usually consists of rigorous systematic sampling of vegetation as well as laboratory analysis to determine uranium content. [46] [47]
Geobotanical prospecting has also been used to discover a variety of other resources. One such resource is Kimberlite pipes, an igneous rock feature that often contains diamonds. [6] The indicator plant, Pandanus candelabrum, was found to be biochemically distinct when growing on kimberlite pipes when compared to samples growing on country rock. [48] This discovery makes it possible for future prospecting of kimberlite pipes and by association, diamonds, using geobotanical prospecting. [6] [48]
In some cases direct detection of the mineral of interest is not possible, and detection of pathfinder minerals is required. [40] Such is the case with arsenic and gold, [40] and in scandium and ultramafic regolith's (rich in cobalt and nickel). [49] In cases such as these, the mineral concentration in the local flora is especially useful. [49]
Other minerals have also been discovered using indicator plants. Iron and Zinc can be located with the indicator plant Pinus brutia. [50] Chromite deposits can be located using the indicator plant Pteropyrum olivieri. [51]
There are many advantages and benefits associated with geobotanical prospecting, making it a valuable addition to modern and traditional prospecting methods. It is a relatively cost effective method of prospecting when compared to traditional methods such as drilling. [19] By taking advantage of the indications from local flora, it is possible to get an overview of the local geology. [52] This overview can be accomplished with a significantly lower investment in manpower and expensive equipment that is needed for more traditional prospecting methods such as drilling. [52] [53] Geobotanical prospecting is a minimally invasive process, allowing for large scale initial prospecting with minimal environmental disruption. [3] Making it a relatively environmentally sustainable prospecting method. [1]
Along with its minimally invasive nature, geobotanical prospecting allows for time efficient large-scale prospecting. [3] With continual advancements in remote sensing technologies such as aerial photography and satellite imaging, it is possible to get a detailed map of an area's botany in a relatively short amount of time. [2] This large scale fast spatial coverage increases the likelihood of locating mineral deposits and resulting in successful prospecting efforts. [52] [15]
Another benefit of geobotanical prospecting is an educational one. [54] Mapping the vegetation of an area and determining its underlying geology, allows researchers to increase their understanding of the earths geochemical processes, i.e., the interaction between minerals and living botany. [52] [54] By analyzing the distribution and concentration of various elements and minerals in botanical life, researcher's understanding of the mineralization process will increase. [2] This rise in understanding will allow for a broader understanding of the interactions between inorganic substances, such as minerals, and organic life, such as plants. [54]
Geobotanical prospecting can be applied to many minerals, including copper and uranium. [24] [46] This versatility is an advantage of geobotanical prospecting. [7]
Geobotanical prospecting is not without limitations. The success of geobotanical prospecting methods depends on many factors including, local plant species diversity, [2] [1] soil composition [8] and climate conditions. [3] [55] All these factors can obscure key results or cause a misinterpretation of findings.
One limitation is that this method relies on the presence of specific indicator plants, i.e., local plant species diversity. [1] [7] The specific indicator plants needed to determine mineral deposits may not be established in every area where those mineral deposits are located. [55] These deposits would remain undetected if geobotanical prospecting was the only method of prospecting used. [7] Additionally, even if the indicator plants were present but the mineral deposit had not released enough minerals into the surrounding soils, the soil composition of the area would not allow for indicator plants to intake sufficient concentrations of the desired minerals. [8] These deposits would remain undetected. The remote sensing methods depend on climate conditions. Some indicator plants will not show all identifiable features in all seasons, i.e., some plants only bloom in summer and autumn. [55] If climate is not conducive to accurate results, mineral deposits may remain undetected. [3]
As anthropogenic influences increase, vegetation-based indicators may be heavily influenced. [56] As land use changes and pollution could alter plant-soil interactions and element uptake patterns, results from geobotanical prospecting ventures may be incorrectly interpreted. [8] [56] The incorrect results could lead to misidentification of mineral deposits or missing mineral deposits altogether. [7]
Another limitation of geobotanical prospecting is that these methods require specialized expertise in both geology and botany, two fields of expertise not commonly studied together. [5] In order to confirm results, samples need to be analyzed in laboratories which could require specialized equipment and expertise. [20]
Geobotanical prospecting will likely show the most efficacy when integrated with other prospecting methods, such as geological and geophysical data and surveys. [5] [57] [36]
Ore is natural rock or sediment that contains one or more valuable minerals concentrated above background levels, typically containing metals, that can be mined, treated and sold at a profit. The grade of ore refers to the concentration of the desired material it contains. The value of the metals or minerals a rock contains must be weighed against the cost of extraction to determine whether it is of sufficiently high grade to be worth mining and is therefore considered an ore. A complex ore is one containing more than one valuable mineral.
Kimberlite, an igneous rock and a rare variant of peridotite, is most commonly known to be the main host matrix for diamonds. It is named after the town of Kimberley in South Africa, where the discovery of an 83.5-carat diamond called the Star of South Africa in 1869 spawned a diamond rush and led to the excavation of the open-pit mine called the Big Hole. Previously, the term kimberlite has been applied to olivine lamproites as Kimberlite II, however this has been in error.
Malachite is a copper carbonate hydroxide mineral, with the formula Cu2CO3(OH)2. This opaque, green-banded mineral crystallizes in the monoclinic crystal system, and most often forms botryoidal, fibrous, or stalagmitic masses, in fractures and deep, underground spaces, where the water table and hydrothermal fluids provide the means for chemical precipitation. Individual crystals are rare, but occur as slender to acicular prisms. Pseudomorphs after more tabular or blocky azurite crystals also occur.
Mining in the engineering discipline is the extraction of minerals from the ground. Mining engineering is associated with many other disciplines, such as mineral processing, exploration, excavation, geology, metallurgy, geotechnical engineering and surveying. A mining engineer may manage any phase of mining operations, from exploration and discovery of the mineral resources, through feasibility study, mine design, development of plans, production and operations to mine closure.
Prospecting is the first stage of the geological analysis of a territory. It is the search for minerals, fossils, precious metals, or mineral specimens. It is also known as fossicking.
Gold prospecting is the act of searching for new gold deposits. Methods used vary with the type of deposit sought and the resources of the prospector. Although traditionally a commercial activity, in some developed countries placer gold prospecting has also become a popular outdoor recreation. Gold prospecting has been popular since antiquity. From the earliest textual and archaeological references, gold prospecting was a common thread for gaining wealth.
Exploration geophysics is an applied branch of geophysics and economic geology, which uses physical methods at the surface of the Earth, such as seismic, gravitational, magnetic, electrical and electromagnetic, to measure the physical properties of the subsurface, along with the anomalies in those properties. It is most often used to detect or infer the presence and position of economically useful geological deposits, such as ore minerals; fossil fuels and other hydrocarbons; geothermal reservoirs; and groundwater reservoirs. It can also be used to detect the presence of unexploded ordnance.
Botanical prospecting for uranium is a method of finding uranium deposits either by observation of plant life growing on the surface, or by geochemical analysis of plant material in a process known as Geobotanical prospecting.
Andrew A. Snelling is a young-Earth creationist geologist who works for Answers in Genesis.
Iron oxide copper gold ore deposits (IOCG) are important and highly valuable concentrations of copper, gold and uranium ores hosted within iron oxide dominant gangue assemblages which share a common genetic origin.
Saprolite is a chemically weathered rock. Saprolites form in the lower zones of soil profiles and represent deep weathering of the bedrock surface. In most outcrops, its color comes from ferric compounds. Deeply weathered profiles are widespread on the continental landmasses between latitudes 35°N and 35°S.
A nickel mine is a mine that produces nickel. Some mines produce nickel primarily, while some mines produce nickel as a side-product of some other metal that has a higher concentration in the ore.
Brine mining is the extraction of useful materials which are naturally dissolved in brine. The brine may be seawater, other surface water, groundwater, or hyper-saline solutions from several industries. It differs from solution mining or in-situ leaching in that those methods inject water or chemicals to dissolve materials which are in a solid state; in brine mining, the materials are already dissolved.
Choquelimpie is a 5,327 metres (17,477 ft) high volcano in Chile. It is constructed from several separate layers of andesite and dacite on top of Tertiary and Precambrian layers. The volcano was active over six million years ago, with the neighbouring volcano Ajoya active over seven million years ago. Since then, erosion and glacial activity have dramatically reduced the height of the volcano and excavated a central depression.
A primary mineral is any mineral formed during the original crystallization of the host igneous primary rock and includes the essential mineral(s) used to classify the rock along with any accessory minerals. In ore deposit geology, hypogene processes occur deep below the Earth's surface, and tend to form deposits of primary minerals, as opposed to supergene processes that occur at or near the surface, and tend to form secondary minerals.
Helen Leighton Cannon was an American geologist specifying in geobotany and studying the effects of geological chemicals on the environment. She was a woman in science making large contributions to geology and advancements for women in science. She had a long lasting career at the United States Geological Survey in Washington, D.C., and Denver, Colorado, soon becoming well known for her research and important discoveries. Cannon, along with two colleagues at USGS, set up and participated in the first organized unit studying chemicals in the real environment. The team concluded that by analyzing plants in a given area they could determine what metals were present in the soil and earth in that same area. In 1952, Cannon published a paper based on the findings and this paved the way for more research in geology and plants, geobotany. This research developed further into an important association with health issues, including cancer, as well as aided the United States to find uranium deposits during the Cold War. As an author, she has been largely collected by libraries.
Quesnellia, or the Quesnel terrane, is a terrane in British Columbia, Canada; constituent of the Canadian Cordillera. It formed volcanic arc during the Mesozoic era, in the Triassic and Jurassic periods.
Michel Jébrak is a Franco-Canadian geologist, academic and a researcher. He is an emeritus professor at University of Quebec’s Department of Earth and Atmospheric Sciences. He is a former Vice-Rector for Research and Creation at UQAM and holder of the UQAT-UQAM Mining Entrepreneurship Chair.
Rachel Haymon is a marine geologist known for her work linking geological and biological processes occurring at deep-sea hydrothermal vents. In 2005 she was elected a fellow of the Geological Society of America.
Heterogenite is a natural tri-valent cobalt oxyhydroxide mineral. It is the most abundant oxidised cobalt mineral in the Katanga Copperbelt, a region in the Democratic Republic of the Congo. About 70% of known heterogenite is located in the DRC.