Hoy (boat)

Last updated

18th-century diagram of a hoy, with the names of essential parts and a legend giving dimensions 18th-century hoy.jpg
18th-century diagram of a hoy, with the names of essential parts and a legend giving dimensions

A hoy is a small Gaff-rigged coasting ship or a heavy barge used for freight, usually with a burthen of about 60 tons (bm). The word derives from the Middle Dutch hoey. In 1495, one of the Paston Letters included the phrase, An hoye of Dorderycht (a hoy of Dordrecht), [2] in such a way as to indicate that such contact was then no more than mildly unusual. The English term was first used on the Dutch Heude-ships that entered service with the Royal Navy.

Contents

Evolution and use

A Scene on board a Margate Hoy as described by Dibden (caricature), 1804, National Maritime Museum, Greenwich Scene aboard a Margate hoy.jpg
A Scene on board a Margate Hoy as described by Dibden (caricature), 1804, National Maritime Museum, Greenwich

Over time the hoy evolved in terms of its design and use. In the fifteenth century a hoy might be a small spritsail-rigged warship like a cromster. Like the earlier forms of the French chaloupe, it could be a heavy and unseaworthy harbour boat or a small coastal sailing vessel (latterly, the chaloupe was a pulling cutter – nowadays motorized). In the sixteenth century, Sir Roger Williams considered that a combination of manoeuvrability, shallow draught, and heavy artillery made the hoy the most effective warship in Dutch coastal waters. [3] Hoys played a significant role in the Siege of Sluis (1587). [4]

By the 18th and 19th Century hoys were sloop-rigged and the mainsail could be fitted with or without a boom. English hoys tended to be single-masted, whereas Dutch hoys had two masts. Principally, and more so latterly, the hoy was a passenger or cargo boat. For the English, a hoy was a ship working in the Thames Estuary and southern North Sea in the manner of the Thames sailing barge of the nineteenth and early twentieth centuries. In the Netherlands a slightly different vessel did the same sort of work in similar waters. Before the development of steam engines, the passage of boats in places like the Thames estuary and the estuaries of the Netherlands, required the skillful use of tides as much as of the wind.

Hoys also would carry cargo or passengers to the larger ships anchored in the Thames. The British East India Company used hoys as lighters for larger ships that could not travel up the Thames to London. These were commonly referred to as East India hoys.

In the eighteenth and early nineteenth centuries, English hoys plied a trade between London and the north Kent coast that enabled middle class Londoners to escape the city for the more rural air of Margate, for example. [5] Others sailed between London and Southampton. These were known as Margate or Southampton hoys and one could hail them from the shore to pick up goods and passengers.

The introduction of the early steamers greatly expanded this sort of trade. At the same time, barges were taking over the cargo coasting trade on the short routes. Together, these developments meant that hoys fell out of use.

Royal Navy

Admiralty plan of the hoy Lyon, 1709, National Maritime Museum, Greenwich Hoy Lyon - plan.jpg
Admiralty plan of the hoy Lyon, 1709, National Maritime Museum, Greenwich

The British Royal Navy used hoys that were specially built to carry fresh water, gunpowder, or ballast. Some were employed in such tasks as laying buoys or survey work, while others served to escort coastal convoys. Still others were in the Revenue Service.

In 1793–94 the Royal Navy purchased 19 Dutch hoys as coastal gun-vessels, particularly for service under Admiral Sir Sidney Smith. In naval service these had 30-man crews and each carried one 24-pounder gun and three 32-pounder carronades. [6] Examples include HMS Scourge and HMS Shark (Shark's crew mutinied in 1795 and handed her over to the French). Around the end of the French Revolutionary Wars, the Navy sold its remaining armed hoys.

Concern about a possible French invasion led the Royal Navy on 28 September 1804 to arm 16 hoys at Margate for the defense of the coast. One of these bore the name King George. The Navy manned each hoy with a captain and nine men from the Sea Fencibles. [7] The same concern also led the British to build over a hundred Martello towers along the British and Irish coasts.

Because most hoys were merchantmen, they were also frequently taken as prizes during time of war. Many of the hoys in British naval service had been captured from enemies. One of the earliest on record was the Mary Grace, captured in 1522 and listed until 1525.

See also

Footnotes

  1. Sutherland (1717), facing p. 17.
  2. "The Paston Letters". archive.org. Retrieved 16 December 2019.
  3. G Gascoigne, A Hundred Sundrie Flowers (Oxford 2000) p. 720
  4. G Mattingley, The Defeat of the Spanish Armada (Penguin) p. 158 and p. 152
  5. Whyman (1993).
  6. Winfield (2008), pp. 324–5.
  7. The Naval chronicle, Volume 12, p.329,

Related Research Articles

<span class="mw-page-title-main">Barge</span> Flat-bottomed watercraft for transport of bulk goods

Barge often refers to a flat-bottomed inland waterway vessel which does not have its own means of mechanical propulsion. The first modern barges were pulled by tugs, but on inland waterways, most are pushed by pusher boats, or other vessels. The term barge has a rich history, and therefore there are many other types of barges.

<span class="mw-page-title-main">Schooner</span> Sailing vessel

A schooner is a type of sailing vessel defined by its rig: fore-and-aft rigged on all of two or more masts and, in the case of a two-masted schooner, the foremast generally being shorter than the mainmast. A common variant, the topsail schooner also has a square topsail on the foremast, to which may be added a topgallant. Differing definitions leave uncertain whether the addition of a fore course would make such a vessel a brigantine. Many schooners are gaff-rigged, but other examples include Bermuda rig and the staysail schooner.

<span class="mw-page-title-main">Brig</span> Sailing vessel with two square-rigged masts

A brig is a type of sailing vessel defined by its rig: two masts which are both square-rigged. Brigs originated in the second half of the 18th century and were a common type of smaller merchant vessel or warship from then until the latter part of the 19th century. In commercial use, they were gradually replaced by fore-and-aft rigged vessels such as schooners, as owners sought to reduce crew costs by having rigs that could be handled by fewer men. In Royal Navy use, brigs were retained for training use when the battle fleets consisted almost entirely of iron-hulled steamships.

<span class="mw-page-title-main">Barque</span> Type of sailing vessel

A barque, barc, or bark is a type of sailing vessel with three or more masts consisting of a fore mast, mainmast and additional masts rigged square and only the aftmost mast rigged fore and aft. Sometimes, the mizzen is only partly fore-and-aft rigged, bearing a square-rigged sail above.

<span class="mw-page-title-main">Sloop-of-war</span> Type of warship

During the 18th and 19th centuries, a sloop-of-war was a warship of the British Royal Navy with a single gun deck that carried up to 18 guns. The rating system of the Royal Navy covered all vessels with 20 or more guns; thus, the term encompassed all unrated warships, including gun-brigs and cutters. In technical terms, even the more specialised bomb vessels and fire ships were classed by the Royal Navy as sloops-of-war, and in practice these were employed in the role of a sloop-of-war when not carrying out their specialised functions.

<span class="mw-page-title-main">Hulk (ship type)</span> Ship that is afloat, but not seagoing

A hulk is a ship that is afloat, but incapable of going to sea. Hulk may be used to describe a ship that has been launched but not completed, an abandoned wreck or shell, or to refer to a ship whose propulsion system is no longer maintained or has been removed altogether. The word hulk also may be used as a verb: a ship is "hulked" to convert it to a hulk. The verb was also applied to crews of Royal Navy ships in dock, who were sent to the receiving ship for accommodation, or "hulked". Hulks have a variety of uses such as housing, prisons, salvage pontoons, gambling sites, naval training, or cargo storage.

<span class="mw-page-title-main">Cutter (boat)</span> Type of boat

A cutter is a name for various types of watercraft. It can apply to the rig of a sailing vessel, to a governmental enforcement agency vessel, to a type of ship's boat which can be used under sail or oars, or, historically, to a type of fast-sailing vessel introduced in the 18th century, some of which were used as small warships.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<span class="mw-page-title-main">Thames sailing barge</span> Type of commercial sailing boat

A Thames sailing barge is a type of commercial sailing boat once common on the River Thames in London. The flat-bottomed barges, with a shallow draught and leeboards, were perfectly adapted to the Thames Estuary, with its shallow waters and narrow tributary rivers. The larger barges were seaworthy vessels, and were the largest sailing vessel to be handled by just two men. The average size was about 120 tons and they carried 4,200 square feet (390 m2) of canvas sail in six working sails. The mainsail was loose-footed and set up with a sprit, and was brailed to the mast when not needed. It is sheeted to a horse, as is the foresail; they require no attention when tacking. The foresail is often held back by the mate to help the vessel come about more swiftly.

<span class="mw-page-title-main">Spritsail</span>

The spritsail is a four-sided, fore-and-aft sail that is supported at its highest points by the mast and a diagonally running spar known as the sprit. The foot of the sail can be stretched by a boom or held loose-footed just by its sheets. A spritsail has four corners: the throat, peak, clew, and tack. The Spritsail can also be used to describe a rig that uses a spritsail.

<span class="mw-page-title-main">Galiot</span> Ship type

A galiot, galliot or galiote, was a small galley boat propelled by sail or oars. There are three different types of naval galiots that sailed on different seas.

A balinger, or ballinger was a type of small, sea-going vessel. It was swift and performed well under both sail and oars. It was probably developed in Bayonne for hunting whales. The ships were used in the conquest of Anglesey in 1282. They were also in use in the 15th and 16th centuries. They were distinguished by their lack of a forecastle, and by carrying either a square sail, or a sail extended on a sprit on a single mast. They were generally less than 100 tons, with a shallow draught, and the earlier vessels at least carried 30 or more oars for use in sheltered areas or for close fighting. They were mainly used for coastal trade, but could also be used as transports, carrying around forty soldiers. A number were employed in the early Royal Navy for this purpose.

<i>Thalatta</i> (Thames barge) Thames sailing barge

Thalatta is a Thames sailing barge, built in Harwich, Essex, in 1906 and rebuilt in St Osyth in 2012. She is 90 feet (27 m) long and 26 feet (7.9 m) across the widest part of the deck. Like all Thames barges, she is flat-bottomed and has leeboards instead of a keel. She spent some of her life ketch-rigged and some of it spritsail-rigged. She is now permanently spritsail rigged, and has a mainmast and topmast that, together, are about 90 feet (27 m) high, and a mizzen mast. Thalatta has had two periods with an auxiliary engine and two without. She carried cargo for sixty years and was then converted for use as a sail training ship in 1966. She was completely rebuilt between 2006 and 2012 at St Osyth with assistance from lottery funds.

<i>Rose Hill Packet</i>

Rose Hill Packet, was a marine craft built in Australia to serve the second place of European settlement in Australia, "Rose Hill", the furthest navigable point inland on the Parramatta River. When launched the vessel was named Prince of Wales but was later named the Rosehill Packet by the convicts. The boat design was later called a packet boat, because its use was that of running the first Parramatta River trade ferry, passenger, cargo, and mail service between the Sydney Cove and the Rose Hill (Parramatta) First Fleet settlements after she was launched in Sydney Cove in September and commissioned on 5 October 1789. She was the first purpose-built sailing vessel constructed in Sydney. She later earned the nickname 'The Lump'. Some authorities believe that a 1790 drawing by First Fleet MIdshipman George Raper shows the vessel in the centre of Sydney Cove.

<i>Will</i> (Thames barge)

Will is a Thames sailing barge, built in Great Yarmouth by Fellows & Co in 1925. She is 97.6 ft (29.75 m) long, 23.1 ft (7.04 m) across and 9.6 ft (2.93 m) deep. Will Everard, as she was originally known, was commissioned as one of four steel barges; the largest ever built. She is a mulie, with a spritsail rigged mainmast, a topmast and a gaff-rigged mizzen. She has a flat bottom with leeboards as is customary for Thames sailing barges. As one of the last sailing cargo vessels to operate in UK waters she left trade in 1966. After a few years lying derelict, she was refitted and eventually entered into the service of P&O where she was used as a floating board room until 1999. This role in corporate hospitality continued and she now is fully engaged in private charter work. She currently operates out of the Pool of London from a base at Hermitage Community Moorings, Reeds Wharf and St Katherine Docks for cruises through London, the east coast and beyond.

SB <i>Centaur</i> British wooden Thames sailing barge

SB Centaur is a wooden Thames sailing barge, built in Harwich, Essex, England in 1895. She was used to carry various cargoes, mainly grain, for the next 60 years. During the First World War she carried food and coal to the French Channel ports. During the Second World War Centaur was damaged when sailing to assist with the Dunkirk Evacuation. She did war work for the duration of the conflict.

SB Decima

SB Decima is a steel Thames sailing barge constructed in Southampton in 1899 by J.G. Fay and Co, Southampton for E. J. Goldsmith of Grays, Essex. She is back under sail and resident on the River Darent in Dartford, Kent. She is a notable "Historic Ship".

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

This glossary defines the various types of ships and accessory watercraft that have been used in service of the United States. Such service is mainly defined as military vessels used in the United States Navy and United States Coast Guard, as well as the defunct, incorporated, or renamed institutions such as the United States Revenue Cutter Service. Service of the United States can also be defined in this context as special government missions in the form of expeditions, such as the Wilkes Expedition or the North Pacific Exploring and Surveying Expedition. The scope of the glossary encompasses both the "Old Navy" of the United States, from its beginnings as the "Continental Navy", through the "New Navy" and up to modern day. The watercraft included in the glossary are derived from United States ships with logbooks published by the National Archives and Records Administration.

References