Nash embedding theorems

Last updated

The Nash embedding theorems (or imbedding theorems), named after John Forbes Nash Jr., state that every Riemannian manifold can be isometrically embedded into some Euclidean space. Isometric means preserving the length of every path. For instance, bending but neither stretching nor tearing a page of paper gives an isometric embedding of the page into Euclidean space because curves drawn on the page retain the same arclength however the page is bent.

Contents

The first theorem is for continuously differentiable (C1) embeddings and the second for embeddings that are analytic or smooth of class Ck, 3 ≤ k ≤ ∞. These two theorems are very different from each other. The first theorem has a very simple proof but leads to some counterintuitive conclusions, while the second theorem has a technical and counterintuitive proof but leads to a less surprising result.

The C1 theorem was published in 1954, the Ck-theorem in 1956. The real analytic theorem was first treated by Nash in 1966; his argument was simplified considerably by Greene & Jacobowitz (1971). (A local version of this result was proved by Élie Cartan and Maurice Janet in the 1920s.) In the real analytic case, the smoothing operators (see below) in the Nash inverse function argument can be replaced by Cauchy estimates. Nash's proof of the Ck- case was later extrapolated into the h-principle and Nash–Moser implicit function theorem. A simpler proof of the second Nash embedding theorem was obtained by Günther (1989) who reduced the set of nonlinear partial differential equations to an elliptic system, to which the contraction mapping theorem could be applied. [1]

Nash–Kuiper theorem (C1 embedding theorem)

Given an m-dimensional Riemannian manifold (M, g), an isometric embedding is a continuously differentiable topological embedding f: M → ℝn such that the pullback of the Euclidean metric equals g. In analytical terms, this may be viewed (relative to a smooth coordinate chart x) as a system of 1/2m(m + 1) many first-order partial differential equations for n unknown (real-valued) functions:

If n is less than 1/2m(m + 1), then there are more equations than unknowns. From this perspective, the existence of isometric embeddings given by the following theorem is considered surprising.

Nash–Kuiper theorem. [2] Let (M, g) be an m-dimensional Riemannian manifold and f: M → ℝn a short smooth embedding (or immersion) into Euclidean space n, where nm + 1. This map is not required to be isometric. Then there is a sequence of continuously differentiable isometric embeddings (or immersions) M → ℝn of g which converge uniformly to f.

The theorem was originally proved by John Nash with the stronger assumption nm + 2. His method was modified by Nicolaas Kuiper to obtain the theorem above. [3] [4]

The isometric embeddings produced by the Nash–Kuiper theorem are often considered counterintuitive and pathological. [5] They often fail to be smoothly differentiable. For example, a well-known theorem of David Hilbert asserts that the hyperbolic plane cannot be smoothly isometrically immersed into 3. Any Einstein manifold of negative scalar curvature cannot be smoothly isometrically immersed as a hypersurface, [6] and a theorem of Shiing-Shen Chern and Kuiper even says that any closed m-dimensional manifold of nonpositive sectional curvature cannot be smoothly isometrically immersed in 2m – 1. [7] Furthermore, some smooth isometric embeddings exhibit rigidity phenomena which are violated by the largely unrestricted choice of f in the Nash–Kuiper theorem. For example, the image of any smooth isometric hypersurface immersion of the round sphere must itself be a round sphere. [8] By contrast, the Nash–Kuiper theorem ensures the existence of continuously differentiable isometric hypersurface immersions of the round sphere which are arbitrarily close to (for instance) a topological embedding of the sphere as a small ellipsoid.

Any closed and oriented two-dimensional manifold can be smoothly embedded in 3. Any such embedding can be scaled by an arbitrarily small constant so as to become short, relative to any given Riemannian metric on the surface. It follows from the Nash–Kuiper theorem that there are continuously differentiable isometric embeddings of any such Riemannian surface where the radius of a circumscribed ball is arbitrarily small. By contrast, no negatively curved closed surface can even be smoothly isometrically embedded in 3. [9] Moreover, for any smooth (or even C2) isometric embedding of an arbitrary closed Riemannian surface, there is a quantitative (positive) lower bound on the radius of a circumscribed ball in terms of the surface area and curvature of the embedded metric. [10]

In higher dimension, as follows from the Whitney embedding theorem, the Nash–Kuiper theorem shows that any closed m-dimensional Riemannian manifold admits an continuously differentiable isometric embedding into an arbitrarily small neighborhood in 2m-dimensional Euclidean space. Although Whitney's theorem also applies to noncompact manifolds, such embeddings cannot simply be scaled by a small constant so as to become short. Nash proved that every m-dimensional Riemannian manifold admits a continuously differentiable isometric embedding into 2m + 1. [11]

At the time of Nash's work, his theorem was considered to be something of a mathematical curiosity. The result itself has not found major applications. However, Nash's method of proof was adapted by Camillo De Lellis and László Székelyhidi to construct low-regularity solutions, with prescribed kinetic energy, of the Euler equations from the mathematical study of fluid mechanics. In analytical terms, the Euler equations have a formal similarity to the isometric embedding equations, via the quadratic nonlinearity in the first derivatives of the unknown function. [12] The ideas of Nash's proof were abstracted by Mikhael Gromov to the principle of convex integration, with a corresponding h-principle. [13] This was applied by Stefan Müller and Vladimír Šverák to Hilbert's nineteenth problem, constructing minimizers of minimal differentiability in the calculus of variations. [14]

Ck embedding theorem

The technical statement appearing in Nash's original paper is as follows: if M is a given m-dimensional Riemannian manifold (analytic or of class Ck, 3 ≤ k ≤ ∞), then there exists a number n (with nm(3m+11)/2 if M is a compact manifold, and with nm(m+1)(3m+11)/2 if M is a non-compact manifold) and an isometric embedding ƒ: MRn (also analytic or of class Ck). [15] That is ƒ is an embedding of Ck manifolds and for every point p of M, the derivativep is a linear map from the tangent space TpM to Rn which is compatible with the given inner product on TpM and the standard dot product of Rn in the following sense:

for all vectors u, v in TpM. When n is larger than 1/2m(m + 1), this is an underdetermined system of partial differential equations (PDEs).

The Nash embedding theorem is a global theorem in the sense that the whole manifold is embedded into Rn. A local embedding theorem is much simpler and can be proved using the implicit function theorem of advanced calculus in a coordinate neighborhood of the manifold. The proof of the global embedding theorem relies on Nash's implicit function theorem for isometric embeddings. This theorem has been generalized by a number of other authors to abstract contexts, where it is known as Nash–Moser theorem. The basic idea in the proof of Nash's implicit function theorem is the use of Newton's method to construct solutions. The standard Newton's method fails to converge when applied to the system; Nash uses smoothing operators defined by convolution to make the Newton iteration converge: this is Newton's method with postconditioning. The fact that this technique furnishes a solution is in itself an existence theorem and of independent interest. In other contexts, the convergence of the standard Newton's method had earlier been proved by Leonid Kantorovitch.

Citations

  1. Taylor 2011, pp. 147–151.
  2. Eliashberg & Mishachev 2002, Chapter 21; Gromov 1986, Section 2.4.9.
  3. Nash 1954.
  4. Kuiper 1955a; Kuiper 1955b.
  5. Kobayashi & Nomizu 1969, Note 18.
  6. Kobayashi & Nomizu 1969, Theorem VII.5.3.
  7. Kobayashi & Nomizu 1969, Corollary VII.4.8.
  8. Kobayashi & Nomizu 1969, Corollary VII.5.4 and Note 15.
  9. Kobayashi & Nomizu 1969, Theorem VII.5.6.
  10. Burago & Zalgaller 1988, Corollary 6.2.2.
  11. Nash 1954, pp. 394–395.
  12. De Lellis & Székelyhidi 2013; Isett 2018.
  13. Gromov 1986, Section 2.4.
  14. Müller & Šverák 2003.
  15. Nash 1956.

General and cited references

Related Research Articles

In mathematics, an embedding is one instance of some mathematical structure contained within another instance, such as a group that is a subgroup.

<span class="mw-page-title-main">John Forbes Nash Jr.</span> American mathematician and Nobel laureate (1928–2015)

John Forbes Nash, Jr., known and published as John Nash, was an American mathematician who made fundamental contributions to game theory, real algebraic geometry, differential geometry, and partial differential equations. Nash and fellow game theorists John Harsanyi and Reinhard Selten were awarded the 1994 Nobel Memorial Prize in Economics. In 2015, he and Louis Nirenberg were awarded the Abel Prize for their contributions to the field of partial differential equations.

Riemannian geometry is the branch of differential geometry that studies Riemannian manifolds, defined as smooth manifolds with a Riemannian metric. This gives, in particular, local notions of angle, length of curves, surface area and volume. From those, some other global quantities can be derived by integrating local contributions.

<span class="mw-page-title-main">Ricci flow</span> Partial differential equation

In the mathematical fields of differential geometry and geometric analysis, the Ricci flow, sometimes also referred to as Hamilton's Ricci flow, is a certain partial differential equation for a Riemannian metric. It is often said to be analogous to the diffusion of heat and the heat equation, due to formal similarities in the mathematical structure of the equation. However, it is nonlinear and exhibits many phenomena not present in the study of the heat equation.

In mathematics, the Chern theorem states that the Euler–Poincaré characteristic of a closed even-dimensional Riemannian manifold is equal to the integral of a certain polynomial of its curvature form.

<span class="mw-page-title-main">Homotopy principle</span>

In mathematics, the homotopy principle is a very general way to solve partial differential equations (PDEs), and more generally partial differential relations (PDRs). The h-principle is good for underdetermined PDEs or PDRs, such as the immersion problem, isometric immersion problem, fluid dynamics, and other areas.

<span class="mw-page-title-main">Eugenio Calabi</span> Italian-born American mathematician (1923–2023)

Eugenio Calabi was an Italian-born American mathematician and the Thomas A. Scott Professor of Mathematics at the University of Pennsylvania, specializing in differential geometry, partial differential equations and their applications.

<span class="mw-page-title-main">Richard S. Hamilton</span> American mathematician (born 1943)

Richard Streit Hamilton is an American mathematician who serves as the Davies Professor of Mathematics at Columbia University. He is known for contributions to geometric analysis and partial differential equations. Hamilton is best known for foundational contributions to the theory of the Ricci flow and the development of a corresponding program of techniques and ideas for resolving the Poincaré conjecture and geometrization conjecture in the field of geometric topology. Grigori Perelman built upon Hamilton's results to prove the conjectures, and was awarded a Millennium Prize for his work. However, Perelman declined the award, regarding Hamilton's contribution as being equal to his own.

In the mathematical field of Riemannian geometry, the fundamental theorem of Riemannian geometry states that on any Riemannian manifold there is a unique affine connection that is torsion-free and metric-compatible, called the Levi-Civita connection or (pseudo-)Riemannian connection of the given metric. Because it is canonically defined by such properties, often this connection is automatically used when given a metric.

<span class="mw-page-title-main">Differentiable manifold</span> Manifold upon which it is possible to perform calculus

In mathematics, a differentiable manifold is a type of manifold that is locally similar enough to a vector space to allow one to apply calculus. Any manifold can be described by a collection of charts (atlas). One may then apply ideas from calculus while working within the individual charts, since each chart lies within a vector space to which the usual rules of calculus apply. If the charts are suitably compatible, then computations done in one chart are valid in any other differentiable chart.

In the mathematical field of analysis, the Nash–Moser theorem, discovered by mathematician John Forbes Nash and named for him and Jürgen Moser, is a generalization of the inverse function theorem on Banach spaces to settings when the required solution mapping for the linearized problem is not bounded.

<span class="mw-page-title-main">Geometric analysis</span> Field of higher mathematics

Geometric analysis is a mathematical discipline where tools from differential equations, especially elliptic partial differential equations (PDEs), are used to establish new results in differential geometry and differential topology. The use of linear elliptic PDEs dates at least as far back as Hodge theory. More recently, it refers largely to the use of nonlinear partial differential equations to study geometric and topological properties of spaces, such as submanifolds of Euclidean space, Riemannian manifolds, and symplectic manifolds. This approach dates back to the work by Tibor Radó and Jesse Douglas on minimal surfaces, John Forbes Nash Jr. on isometric embeddings of Riemannian manifolds into Euclidean space, work by Louis Nirenberg on the Minkowski problem and the Weyl problem, and work by Aleksandr Danilovich Aleksandrov and Aleksei Pogorelov on convex hypersurfaces. In the 1980s fundamental contributions by Karen Uhlenbeck, Clifford Taubes, Shing-Tung Yau, Richard Schoen, and Richard Hamilton launched a particularly exciting and productive era of geometric analysis that continues to this day. A celebrated achievement was the solution to the Poincaré conjecture by Grigori Perelman, completing a program initiated and largely carried out by Richard Hamilton.

<span class="mw-page-title-main">Immersion (mathematics)</span> Differentiable function whose derivative is everywhere injective

In mathematics, an immersion is a differentiable function between differentiable manifolds whose differential pushforward is everywhere injective. Explicitly, f : MN is an immersion if

In Riemannian geometry, a branch of mathematics, harmonic coordinates are a certain kind of coordinate chart on a smooth manifold, determined by a Riemannian metric on the manifold. They are useful in many problems of geometric analysis due to their regularity properties.

In differential geometry, Mikhail Gromov's filling area conjecture asserts that the hemisphere has minimum area among the orientable surfaces that fill a closed curve of given length without introducing shortcuts between its points.

<span class="mw-page-title-main">Differential geometry of surfaces</span> The mathematics of smooth surfaces

In mathematics, the differential geometry of surfaces deals with the differential geometry of smooth surfaces with various additional structures, most often, a Riemannian metric. Surfaces have been extensively studied from various perspectives: extrinsically, relating to their embedding in Euclidean space and intrinsically, reflecting their properties determined solely by the distance within the surface as measured along curves on the surface. One of the fundamental concepts investigated is the Gaussian curvature, first studied in depth by Carl Friedrich Gauss, who showed that curvature was an intrinsic property of a surface, independent of its isometric embedding in Euclidean space.

In mathematics, the Riemannian connection on a surface or Riemannian 2-manifold refers to several intrinsic geometric structures discovered by Tullio Levi-Civita, Élie Cartan and Hermann Weyl in the early part of the twentieth century: parallel transport, covariant derivative and connection form. These concepts were put in their current form with principal bundles only in the 1950s. The classical nineteenth century approach to the differential geometry of surfaces, due in large part to Carl Friedrich Gauss, has been reworked in this modern framework, which provides the natural setting for the classical theory of the moving frame as well as the Riemannian geometry of higher-dimensional Riemannian manifolds. This account is intended as an introduction to the theory of connections.

<span class="mw-page-title-main">Maps of manifolds</span>

In mathematics, more specifically in differential geometry and topology, various types of functions between manifolds are studied, both as objects in their own right and for the light they shed

In mathematics, Salomon Bochner proved in 1946 that any Killing vector field of a compact Riemannian manifold with negative Ricci curvature must be zero. Consequently the isometry group of the manifold must be finite.

In the mathematical fields of differential geometry and geometric analysis, the Gauss curvature flow is a geometric flow for oriented hypersurfaces of Riemannian manifolds. In the case of curves in a two-dimensional manifold, it is identical with the curve shortening flow. The mean curvature flow is a different geometric flow which also has the curve shortening flow as a special case.