Tokamak de Fontenay-aux-Roses

Last updated
TFR
Tokamak de Fontenay-aux-Roses
Device type Tokamak
Location Fontenay-aux-Roses, Paris, France
Affiliation Commissariat à l'énergie atomique
Technical specifications
Major radius98 cm (39 in)
(often listed as 1 m)
Minor radius20 cm (7.9 in) (later 24 cm (9.4 in))
Plasma volume1  m3
Magnetic field 6.0 T (60,000 G) (toroidal)
Heating power2.2  MW
Discharge duration0.25  s
Plasma current400  kA (later 600)
Plasma temperature 3  keV (electrons)
History
Date(s) of construction1970 to 1973
Year(s) of operation1973–1986
Succeeded by Tore Supra

The Tokamak de Fontenay-aux-Roses (TFR) was the first French tokamak, built in a research centre of the French Atomic Energy Commission (CEA) in Fontenay-aux-Roses, a commune in the southwestern suburbs of Paris. The project was spearheaded by Paul-Henri Rebut, and is sometimes jokingly referred to as the "Tokamak façon Rebut" – a pun on the name Rebut and the French word "rebut" meaning "rubbish".

Contents

TFR was roughly the same size as the contemporary Soviet T-3 and American Symmetrical Tokamak, but had a larger internal plasma volume and a much more powerful power supply that drove plasma currents up to 400,000 Amps and as long as half a second. Completed in 1973, it remained the world's most powerful tokamak until 1976, when it was surpassed by the Princeton Large Torus. It underwent several major upgrades during its lifetime, which continually improved its performance.

Among the major discoveries made on TFR was the problem of runaway electrons. In 1973, only months after beginning operations, such an event burned holes through the vacuum vessel, requiring extensive repairs. The following investigation identified a new type of plasma instability that was previously not noticed, today known as neoclassical transport. Since this time a number of similar issues have been found and they are now all classified as "disruptions".

A replacement vacuum vessel was quickly supplied and the device soon reached its design goals. It was later expanded several times with more powerful power supplies and more heating systems. TFR was decommissioned in 1986, at which time it was the oldest operating tokamak. It was replaced by Tore Supra at France's main atomic research center, Cadarache.

History

Tokamak rush

When the tokamak concept was first revealed by Soviet researchers in 1965, the results were so good that international observers dismissed them out of hand. A follow-up in 1968 showed even better results, 10 to 100 times the best seen in other labs. [1] [2] Once again the other labs dismissed the Soviet results. This time, however, Lev Artsimovich was prepared. He invited a team of UK researchers, nicknamed "the Culham Five", to measure the electron temperature in the T-3 device, using their newly-developed laser Thomson scattering diagnostic equipment, to see if the temperatures they were measuring were accurate. [3] After months of setup and calibration, by the summer of 1969 the measurements carried out under the supervision of Derek Robinson showed the results were even better than the Soviets had reported the previous year. [4] [5]

The result is what is today known as the "tokamak rush". These results suggested that the tokamak was the first large-scale device that clearly beat a significant barrier to progress up to that date, Bohm diffusion. While some experiments in the UK and US also showed signs of beating this limit, they did so at lower temperatures that were not useful for a fusion device. The tokamak's plasma was remaining stable even at the very highest temperatures the device was capable of. Interest in almost all other approaches waned, and by 1970 there were dozens of efforts around the world to beat the Soviet results. [6]

TFR

In 1970, the decision was made to concentrate all fusion research in France at Fontenay-aux-Roses, mirroring the UK's similar decision that resulted in UKAEA Culham in 1965. Planning for the TFR began immediately under the direction of Paul-Henri Rebut, and the design is sometimes jokingly referred to as the "Tokamak façon Rebut". [7] Based largely on the Soviet T-3 design, TFR was similar in dimensions and construction, but had much larger power supplies that would allow them to produce higher plasma densities and for longer times, [8] and a larger internal plasma volume of 1 cubic meter. For comparison, the modern ITER tokamak is 840 cubic meters. [7]

TFR produced its first plasma on 22 March 1973. The system quickly ramped up its power until three months later when a hole burned through the inner wall of the vacuum chamber. The reason for this was quickly determined to be due to a beam of fast electrons, roughly 50 keV. The beam formed by trapping electrons in a magnetic mirror formed within the torus, which built up to a critical threshold. [9] At this point, the interaction between the electrons and the surrounding plasma causes an effect that had first been proposed as a mechanism for the propagation of lightning. [10]

This previously unseen mirroring effect is today known as neoclassical transport, which is formed by the magnetic field being stronger on the inside radius of the toroid than the outside, causing low-energy particles to be reflected as they travel along paths that take them closer to the inside edge. As more of these particles build up in these "banana orbits", so named for their curved shape, they can reach a point where they have enough density to create a channel of charge that accelerates them in the surrounding plasma and the resulting electron bursts are known as runaway electrons. [9] Today, these events are part of a larger group of similar problems known generically as "disruptions". [11]

The vacuum chamber was replaced and experiments began to increase the performance once again, reaching the original performance goals in October 1974. By that time, TFR was the most powerful tokamak in the world, reaching ion temperatures of 1 keV and a Lawson criterion figure of 2.5 ⨉ 1012/cm³s. [8]

Even with the larger power supplies, the system was not able to heat the plasma to fusion temperatures. This was one of the major problems with the basic tokamak design compared to earlier systems like Z-pinch that also strongly heated their plasmas. To address this, TFR had planned almost from the start [12] to incorporate neutral beam injection, or NBI, which uses a small particle accelerator to fire individual atoms of fuel into the reaction chamber. NBI both supplies fresh fuel as well as energy that heats the plasma. By the end of 1975, the 500 kW injectors had raised the operating temperatures to 2 keV, although at a relatively low electron density of 4.4 ⨉ 1013/cm³. [8]

Continuing improvements

In 1977, the vacuum chamber was replaced with a new design that removed the inner shell of copper that had been included to stabilize the plasma. Soviet researchers had developed a new system using additional magnets and feedback control that prevented vertical movement of the plasma, which the shell had previously performed. [13] As well as simplifying the design, the new layout allowed the chamber to have more access points. [8]

The limiter was changed to one made of Inconel. The system initially used a limiter made of molybdenum, whose high melting point allowed it to better absorb the heat load of the ions hitting it. This also resulted in molybdenum being sputtered off into the plasma, which caused the average atomic mass, or Z, of the plasma to be over 3. Energy is lost from a stable plasma primarily through light production (in this context known as radiation), which is a product of temperature and atomic mass. Due to the Z>3, the electron density could not be increased beyond 6 ⨉ 1013/cm³. The new liner, along with a new systematic cleaning regimen, reduced Z back towards 1 and allowed densities to increase to 1.2 ⨉ 1014/cm³. [8]

After 1978, attention turned to providing more heating through the use of ion cyclotron resonance frequency heating, or ICRF. ICRF uses radio frequency energy tuned to the cyclotron frequency of the ions to add energy to them, similar to the way a microwave oven heats water.

Between August 1976 and September 1977 the TFR was dismantled and replaced by a new design sometimes known as TFR-600. [14] The main difference with the previous version was a maximum plasma radius of 24 centimetres (9.4 in), in combination with an improved power supply capable of generating a plasma current of 600 kA. [13] By August 1981, the addition of five more NBI lines increased the ICRF heating power to 2.2 MW and produced plasmas at 2 keV at a high central electron density of 2 ⨉ 1014/cm³. [12]

The Inconel limiter improved the average Z but still resulted in nickel ions in the plasma. In 1982 it was replaced by one made of carbon that greatly reduced atomic mass, and from this point, the primary losses were not due to radiation but electron losses. Around 1985, a new heating system, electron cyclotron resonance frequency, was installed in cooperation with the Institute for Plasma Physics Rijnhuizen (FOM). With the ending of these experiments, TRF shut down after twelve years of operation, at which time it was the oldest tokamak in operation. [15]

Description

The TFR was typical of early tokamak designs, using a cylindrical cross section for its plasma. The vacuum chamber of the first version (TFR 400) in use from April 1973 to August 1976, was moderately sized to confine plasma within a 20 cm (7.9 in) radius in a tube bent into a ring 98 centimetres (39 in) in radius. [16] The TFR 600 was similar to TFR 400, except that the thick copper shell had been removed allowing a plasma radius of 24 cm (9.4 in) and a plasma current of 600 kA. [14]

However, due to its internal arrangement, the TFR-600 had a larger 1 cubic meter useful plasma volume than other early tokamaks like the Soviet T-3. The other major difference was the much larger power supply, which could provide up to 400,000 Amps for up to a quarter of a second, or lower amperage for up to half a second. [7]

The main support for the plasma was a series of eight large toroidal magnets spread out evenly around the torus capable of generating a toroidal magnetic field up to 6 Teslas. [16] Within them were two smaller poloidal magnets, above and below the plasma chamber. Current was induced into the plasma using a transformer core placed between two of the toroidal magnets, its location can be seen by the large power cables running to it on the top of the assembly. [7] There is significant open room between the toroidal magnets where the plasma chamber is accessible. These portions have a number of ports for fuel injection, heating systems and various diagnostic systems. [7]

The original version cost a total of 15 million francs, almost half of which was financed by Euratom's European Nuclear research and training program. [7] [17] [18]

Related Research Articles

<span class="mw-page-title-main">Stellarator</span> Plasma device using external magnets to confine plasma

A stellarator is a device that confines plasma using external magnets. Scientists aim to use stellarators to achieve controlled nuclear fusion. It is one of many types of magnetic confinement fusion devices, the most common being the tokamak. The name "stellarator" refers to stars as fusion also occurs in stars such as the Sun. It is one of the earliest fusion power devices, along with the z-pinch and magnetic mirror.

<span class="mw-page-title-main">Tokamak</span> Magnetic confinement device used to produce thermonuclear fusion power

A tokamak is a device which uses a powerful magnetic field generated by external magnets to confine plasma in the shape of an axially symmetrical torus. The tokamak is one of several types of magnetic confinement devices being developed to produce controlled thermonuclear fusion power. The tokamak concept is currently one of the leading candidates for a practical fusion reactor.

<span class="mw-page-title-main">Princeton Plasma Physics Laboratory</span> National laboratory for plasma physics and nuclear fusion science at Princeton, New Jersey

Princeton Plasma Physics Laboratory (PPPL) is a United States Department of Energy national laboratory for plasma physics and nuclear fusion science. Its primary mission is research into and development of fusion as an energy source. It is known for the development of the stellarator and tokamak designs, along with numerous fundamental advances in plasma physics and the exploration of many other plasma confinement concepts.

<span class="mw-page-title-main">Joint European Torus</span> Facility in Oxford, United Kingdom

The Joint European Torus (JET) was a magnetically confined plasma physics experiment, located at Culham Centre for Fusion Energy in Oxfordshire, UK. Based on a tokamak design, the fusion research facility was a joint European project with the main purpose of opening the way to future nuclear fusion grid energy. At the time of its design JET was larger than any comparable machine.

<span class="mw-page-title-main">ITER</span> International nuclear fusion research and engineering megaproject

ITER is an international nuclear fusion research and engineering megaproject aimed at creating energy through a fusion process similar to that of the Sun. It is being built next to the Cadarache facility in southern France. Upon completion of construction of the main reactor and first plasma, planned for 2033–2034, ITER will be the largest of more than 100 fusion reactors built since the 1950s, with six times the plasma volume of JT-60SA in Japan, the largest tokamak operating today.

<span class="mw-page-title-main">T-15 (reactor)</span>

The T-15 is a Russian nuclear fusion research reactor located at the Kurchatov Institute, which is based on the (Soviet-invented) tokamak design. It was the first industrial prototype fusion reactor to use superconducting magnets to control the plasma. These enormous superconducting magnets confined the plasma the reactor produced, but failed to sustain it for more than just a few seconds. Despite not being immediately applicable, this new technological advancement proved to the USSR that they were on the right path. In the original shape, a toroidal chamber design, it had a major radius of 2.43 m and minor radius 0.7 m.

<span class="mw-page-title-main">Magnetic confinement fusion</span> Approach to controlled thermonuclear fusion using magnetic fields

Magnetic confinement fusion (MCF) is an approach to generate thermonuclear fusion power that uses magnetic fields to confine fusion fuel in the form of a plasma. Magnetic confinement is one of two major branches of controlled fusion research, along with inertial confinement fusion.

<span class="mw-page-title-main">Alcator C-Mod</span> Tokamak at MIT

Alcator C-Mod was a tokamak that operated between 1991 and 2016 at the Massachusetts Institute of Technology (MIT) Plasma Science and Fusion Center (PSFC). Notable for its high toroidal magnetic field, Alcator C-Mod holds the world record for volume averaged plasma pressure in a magnetically confined fusion device. Until its shutdown in 2016, it was one of the major fusion research facilities in the United States.

<span class="mw-page-title-main">Experimental Advanced Superconducting Tokamak</span> Experimental tokamak

The Experimental Advanced Superconducting Tokamak (EAST), internal designation HT-7U, is an experimental superconducting tokamak magnetic fusion energy reactor in Hefei, China. The Hefei Institutes of Physical Science is conducting the experiment for the Chinese Academy of Sciences. It has operated since 2006.

<span class="mw-page-title-main">KSTAR</span> Nuclear fusion research facility in South Korea

The KSTAR is a magnetic fusion device at the Korea Institute of Fusion Energy in Daejeon, South Korea. It is intended to study aspects of magnetic fusion energy that will be pertinent to the ITER fusion project as part of that country's contribution to the ITER effort. The project was approved in 1995, but construction was delayed by the East Asian financial crisis, which weakened the South Korean economy considerably; however, the project's construction phase was completed on September 14, 2007. The first plasma was achieved in June 2008.

The Enormous Toroidal Plasma Device (ETPD) is an experimental physics device housed at the Basic Plasma Science Facility at University of California, Los Angeles (UCLA). It previously operated as the Electric Tokamak (ET) between 1999 and 2006 and was noted for being the world's largest tokamak before being decommissioned due to the lack of support and funding. The machine was renamed to ETPD in 2009. At present, the machine is undergoing upgrades to be re-purposed into a general laboratory for experimental plasma physics research.

The beta of a plasma, symbolized by β, is the ratio of the plasma pressure (p = nkBT) to the magnetic pressure (pmag = B2/2μ0). The term is commonly used in studies of the Sun and Earth's magnetic field, and in the field of fusion power designs.

<span class="mw-page-title-main">WEST (formerly Tore Supra)</span>

The WEST, or Tungsten Environment in Steady-state Tokamak, is a French tokamak that originally began operating as Tore Supra after the discontinuation of TFR and of Petula. The original name came from the words torus and superconductor, as Tore Supra was for a long time the only tokamak of this size with superconducting toroidal magnets, allowing the creation of a strong permanent toroidal magnetic field. After a major upgrade to install tungsten walls and a divertor, the tokamak was renamed WEST.

<span class="mw-page-title-main">Spherical tokamak</span> Fusion power device

A spherical tokamak is a type of fusion power device based on the tokamak principle. It is notable for its very narrow profile, or aspect ratio. A traditional tokamak has a toroidal confinement area that gives it an overall shape similar to a donut, complete with a large hole in the middle. The spherical tokamak reduces the size of the hole as much as possible, resulting in a plasma shape that is almost spherical, often compared to a cored apple. The spherical tokamak is sometimes referred to as a spherical torus and often shortened to ST.

The ARC fusion reactor is a design for a compact fusion reactor developed by the Massachusetts Institute of Technology (MIT) Plasma Science and Fusion Center (PSFC). ARC aims to achieve an engineering breakeven of three. The key technical innovation is to use high-temperature superconducting magnets in place of ITER's low-temperature superconducting magnets. The proposed device would be about half the diameter of the ITER reactor and cheaper to build.

In plasma physics and magnetic confinement fusion, the high-confinement mode (H-mode) is a phenomenon and operating regime of enhanced confinement in toroidal plasma such as tokamaks. When the applied heating power is raised above some threshold, the plasma transitions from the low-confinement mode (L-mode) to the H-mode where the energy confinement time approximately doubles in magnitude. The H-mode was discovered by Friedrich Wagner and team in 1982 during neutral-beam heating experiments on ASDEX. It has since been reproduced in all major toroidal confinement devices, and is foreseen to be the standard operational scenario of ITER.

The Model C stellarator was the first large-scale stellarator to be built, during the early stages of fusion power research. Planned since 1952, construction began in 1961 at what is today the Princeton Plasma Physics Laboratory (PPPL). The Model C followed the table-top sized Model A, and a series of Model B machines that refined the stellarator concept and provided the basis for the Model C, which intended to reach break-even conditions. Model C ultimately failed to reach this goal, producing electron temperatures of 400 eV when about 100,000 were needed. In 1969, after UK researchers confirmed that the USSR's T-3 tokamak was reaching 1000 eV, the Model C was converted to the Symmetrical Tokamak, and stellarator development at PPPL ended.

<span class="mw-page-title-main">Compact Toroidal Hybrid</span>

The Compact Toroidal Hybrid (CTH) is an experimental device at Auburn University that uses magnetic fields to confine high-temperature plasmas. CTH is a torsatron type of stellarator with an external, continuously wound helical coil that generates the bulk of the magnetic field for containing a plasma.

Donato Palumbo was an Italian physicist best known as the leader of the European Atomic Energy Community (Euratom) fusion research program from its formation in 1958 to his retirement in 1986. He was a key force in the development of the tokamak during the 1970s and 80s, contributing several papers on plasma confinement in these devices and leading the JET fusion reactor program, which as of 2021, retains the record for the closest approach to breakeven, the ratio between the produced fusion power and the power used to heat it. He is referred to as the founding father of the European fusion program.

References

Citations

  1. ↑ Arnoux, Robert (4 August 2008). "August 1968: A revolution in fusion". ITER. Retrieved 2024-07-17.
  2. ↑ Kadomtsev, Boris B. (1969-01-31). "Third international conference on plasma physics and controlled nuclear fusion research (Novosibirsk, August 1–7, 1968)" (PDF). Soviet Physics Uspekhi. 12 (1): 133–134. doi:10.1070/pu1969v012n01abeh003921. ISSN   0038-5670.
  3. ↑ Smirnov, V.P. (2010). "Tokamak foundation in USSR/Russia 1950–1990". Nuclear Fusion. 50 (1): 014003. Bibcode:2010NucFu..50a4003S. doi:10.1088/0029-5515/50/1/014003. ISSN   0029-5515.
  4. ↑ Arnoux, Robert (9 October 2009). "Off to Russia with a Thermometer". ITER.
  5. ↑ Peacock, N. J.; Robinson, D. C.; Forrest, M. J.; Wilcock, P. D.; Sannikov, V. V. (November 1969). "Measurement of the Electron Temperature by Thomson Scattering in Tokamak T3". Nature. 224 (5218): 488–490. Bibcode:1969Natur.224..488P. doi:10.1038/224488a0. ISSN   1476-4687.
  6. ↑ Bromberg 1982, p. 181-185.
  7. 1 2 3 4 5 6 Arnoux 2013.
  8. 1 2 3 4 5 TFR 1985, p. 1025.
  9. 1 2 Electrons 1975.
  10. ↑ Gurevich, Alexander & Zybin, Kirill (May 2005). "Runaway breakdown and the mysteries of lightning". Physics Today. 58 (5): 37–43. Bibcode:2005PhT....58e..37G. doi:10.1063/1.1995746.
  11. ↑ Tennenbaum, Jonathan (11 May 2023). "China's EAST breakthroughs shorten path to fusion power". Asia Times.
  12. 1 2 TFR 1985, p. 1027.
  13. 1 2 Braams & Stot 2002, p. 153.
  14. 1 2 TFR Group (April 1979). "Plasma confinement in the TFR tokamak". Journal of Magnetism and Magnetic Materials. 11 (1–3): 332–344. Bibcode:1979JMMM...11..332T. doi:10.1016/0304-8853(79)90285-3.
  15. ↑ TFR 1985, p. 1031.
  16. 1 2 Equipe T.F.R. (August 1977). "Résultats expérimentaux sur le confinement et le chauffage du plasma dans le tokamak de Fontenay-aux-Roses (TFR)" (PDF). Le Journal de Physique Colloques (in French). 38 (C3): C3–9–C3-19. doi:10.1051/jphyscol:1977302. ISSN   0449-1947.
  17. ↑ Association Euratom/CEA. "Controlled thermonuclear fusion". CORDIS | European Commission. Retrieved 2024-07-19.
  18. ↑ Palumbo, Donato (1987). "Nature and Prospects of the EURATOM Fusion Programme". Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences. 322 (1563): 199–211. Bibcode:1987RSPTA.322..199P. doi:10.1098/rsta.1987.0048. ISSN   0080-4614. JSTOR   37751.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.