Ytterbium(III) phosphate

Last updated
Ytterbium(III) phosphate
Names
Other names
  • Ytterbium phosphate
  • Ytterbium orthophosphate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.033.937 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 237-346-9
PubChem CID
  • InChI=1S/H3O4P.Yb/c1-5(2,3)4;/h(H3,1,2,3,4);/q;+3/p-3
    Key: YXNVQKRHARCEKL-UHFFFAOYSA-K
  • [O-]P(=O)([O-])[O-].[Yb+3]
Properties
YbPO4
Molar mass 268.02 g/mol
AppearanceSolid
Density 6.44 g/cm3
Structure
Tetragonal, xenotime type
I41/amd, No. 141
a = 0.6816 nm, c = 0.5966 nm
4
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Ytterbium(III) phosphate is an inorganic compound of ytterbium and phosphate with the chemical formula YbPO4. Hydrated forms are also known.

Contents

Structure and properties

Anhydrous ytterbium(III) phosphate crystallizes in the tetragonal crystal system with the xenotime structure, in space group I41/amd (No. 141). The structure consists of isolated PO4 tetrahedra and eight-coordinate Yb3+ ions. [1]

Representative room-temperature lattice parameters are a = 6.816 Å and c = 5.966 Å, with four formula units per unit cell. [1] The calculated density is approximately 6.44 g/cm3.

Hydrated ytterbium(III) phosphate can be converted to the anhydrous xenotime phase by calcination. Nanosized hydrated powders transform into well-crystallized xenotime-type YbPO4 above about 800 °C. [2]

Optical properties

Ytterbium(III) phosphate shows near-infrared absorption and emission associated with the 4f transitions of Yb3+. In well-crystallized xenotime-type material, the 2F7/2 and 2F5/2 manifolds are split into distinct Stark levels, producing sharp optical features. [2]

The near-infrared photoluminescence intensity increases significantly when hydrated material is calcined to form the ordered xenotime structure. [2]

Cooperative optical transitions involving Yb3+–Yb3+ pairs have also been observed in YbPO4 crystals. [3]

Preparation

Hydrated ytterbium(III) phosphate can be prepared by precipitation from aqueous solutions containing Yb3+ and phosphate ions. A dihydrate has been obtained by reaction of ytterbium(III) chloride with phosphoric acid. [4]

Anhydrous YbPO4 can also be prepared from ytterbium(III) oxide using silicon pyrophosphate, SiP2O7: [5]

SiP2O7 + Yb2O3 → 2 YbPO4 + SiO2

Single crystals have also been grown from Yb2O3 and ammonium dihydrogen phosphate at high temperature. [6]

Applications

Ytterbium(III) phosphate has been investigated as a host material for near-infrared phosphors and for incorporation into glass–ceramic optical materials. Its chemical stability allows YbPO4 particles to survive incorporation into phosphate and silica glass matrices with little reaction. [2]

More recently, xenotime-type YbPO4 has been investigated as an environmental barrier coating material for SiC-based ceramic composites because of its thermal expansion behaviour and resistance to steam and molten silicate attack. [7]

References

  1. 1 2 Ni, Y.; Hughes, J. M.; Mariano, A. N. (1995). "Crystal chemistry of the monazite and xenotime structures". American Mineralogist. 80 (1–2): 21–26. Bibcode:1995AmMin..80...21N. doi:10.2138/am-1995-1-203.
  2. 1 2 3 4 Veber, Alexander; Salminen, Turkka; Matthes, Anne; Mueller, Robert; Wondraczek, Katrin; Petit, Laeticia (2021). "Synthesis, Characterization, and Optical Properties of Ytterbium(III) Phosphates and Their Incorporation in Different Glass Matrices". The Journal of Physical Chemistry C. 125 (1): 702–715. doi:10.1021/acs.jpcc.0c07442.
  3. ↑ Nakazawa, Eiichiro (1976). "Cooperative optical transitions of Yb3+−Yb3+ and Gd3+−Yb3+ ion pairs in YbPO4 hosts". Journal of Luminescence. 12–13: 675–680. Bibcode:1976JLum...12..675N. doi:10.1016/0022-2313(76)90160-5.
  4. ↑ Hikichi, Yasuo; Hukuo, Ken-iti; Shiokawa, Jiro (1978-12-01). "Syntheses of Rare Earth Orthophosphates" . Bulletin of the Chemical Society of Japan. 51 (12): 3645–3646. doi:10.1246/bcsj.51.3645. ISSN   0009-2673.
  5. ↑ Bamberger, Carlos E.; Begun, George M.; Heatherly, Dale E. (1983). "Synthesis of Metal Phosphates Using SiP2O7". Journal of the American Ceramic Society. 66 (11): C208–C209. doi:10.1111/j.1151-2916.1983.tb10575.x.
  6. ↑ Khadraoui, Z.; Horchani-Naifer, K.; Ferhi, M.; Ferid, M. (2015). "Synthesis, characterization and DFT calculations of electronic and optical properties of YbPO4". Chemical Physics. 457: 37–42. Bibcode:2015CP....457...37K. doi:10.1016/j.chemphys.2015.05.014.
  7. ↑ "YbPO4: A novel environmental barrier coating candidate with superior thermochemical stability". Journal of the European Ceramic Society. 42 (3): 1043–1053. 2022. doi:10.1016/j.jeurceramsoc.2021.10.051.