AB SKF is a Swedish bearing and seal manufacturing company founded in Gothenburg, Sweden, in 1907. The company manufactures and supplies bearings, seals, lubrication and lubrication systems, maintenance products, mechatronics products, power transmission products, condition monitoring systems and related services globally.
A bearing is a machine element that constrains relative motion to only the desired motion and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction. Bearings are classified broadly according to the type of operation, the motions allowed, or the directions of the loads (forces) applied to the parts.
In mechanical engineering, a rolling-element bearing, also known as a rolling bearing, is a bearing which carries a load by placing rolling elements between two concentric, grooved rings called races. The relative motion of the races causes the rolling elements to roll with very little rolling resistance and with little sliding.
The Timken Company is a global manufacturer of bearings and power transmission products. Timken operates from 42 countries.
The headset is the set of components on a bicycle that provides a rotatable interface between the bicycle fork and the head tube of a bicycle frame. The tube through which the steerer of the fork passes is called the head tube. A typical headset consists of two cups that are pressed into the top and bottom of the headtube. Inside the two cups are bearings which provide a low friction contact between the bearing cup and the steerer.
A thrust bearing is a particular type of rotary bearing. Like other bearings they permanently rotate between parts, but they are designed to support a predominantly axial load.
Hardy Spicer is a brand of automotive transmission or driveline equipment best known for its mechanical constant velocity universal joint originally manufactured in Britain by Hardy employing patents belonging to US-based Spicer Manufacturing. Hardy and Spicer soon became partners. Later Spicer became Dana Holding Corporation.
Federal-Mogul Corporation is an American developer, manufacturer, and supplier of products for automotive, commercial, aerospace, marine, rail, and off-road vehicles, as well as industrial, agricultural, and power-generation applications. It was acquired in February 2022 by Apollo Global Management.
The BorgWarner T-5 is a 5-speed manual transmission for longitudinal engine automobiles. It includes one overdrive gear, a lightweight aluminum housing, and adaptability for four wheel drive use.
Superfinishing, also known as microfinishing and short-stroke honing, is a metalworking process that improves surface finish and workpiece geometry. This is achieved by removing just the thin amorphous surface layer of fragmented or smeared metal left by the last process with an abrasive stone or tape; this layer is usually about 1 μm in magnitude.
Koyo Seiko was established as a private company by Zenichiro Ikeda in 1921. They initially sold imported bearings but by 1935 had begun production of Koyo branded bearings under the name Koyo Seiko Co., Ltd.
The Torrington Company was a firm that developed in Torrington, Connecticut, originally called the Excelsior Needle Company. It was formed in 1866 around the new idea of using a "cold swaging" technique to create better sewing machine needles, but also produced a lot of other things as it got bigger, since the 1950/ focusing mainly on producing bearings, especially needle bearings. In 1980, it was the largest employer in Torrington.
NRB is a multinational needle and cylindrical roller bearings manufacturer, headquartered in Mumbai.
NTN Corporation is one of the most prominent manufacturers of bearings in Japan, second domestically only to NSK Ltd. The company is one of the largest exporters worldwide of friction-reducing products, such as constant-velocity joints.
A spherical roller bearing is a rolling-element bearing that permits rotation with low friction, and permits angular misalignment. Typically these bearings support a rotating shaft in the bore of the inner ring that may be misaligned in respect to the outer ring. The misalignment is possible due to the spherical internal shape of the outer ring and spherical rollers. Despite what their name may imply, spherical roller bearings are not truly spherical in shape. The rolling elements of spherical roller bearings are mainly cylindrical in shape, but have a profile that makes them appear like cylinders that have been slightly over-inflated.
GGB manufactures self-lubricating, prelubricated plain bearings and tribological polymer coating for various industries and applications. It has production facilities in the U.S., Germany, France, Slovakia, Brazil and China.
A composite bearing is a bearing made from a combination of materials such as a resin reinforced with fibre and this may also include friction reducing lubricants and ingredients.
THK Co., Ltd. is a Japanese company that offers machine elements and modules in the field of mechanical engineering, robotics and automation. The headquarters are in Tokyo. Since it was founded in April 1971, the company has developed into an international company. THK shares have been listed on the Tokyo Stock Exchange's first segment since 2001.
Lewis Rasmus Heim was an American machinist and businessman who was the inventor of the Centerless Cylindrical Grinder, the Heim Joint Rod End Bearing and a pioneer of modern spherical, ball and roller bearings.
The Fafnir Bearing Company was a major American manufacturer of ball bearings.
