Ordosipterus

Last updated

Ordosipterus
Temporal range: Aptian
Ordosipterus.png
Illustration of the holotype holotype lower jaw
Scientific classification OOjs UI icon edit-ltr.svg
Domain: Eukaryota
Kingdom: Animalia
Phylum: Chordata
Order: Pterosauria
Suborder: Pterodactyloidea
Family: Dsungaripteridae
Genus: Ordosipterus
Ji, 2020
Type species
Ordosipterus planignathus
Ji, 2020

Ordosipterus is a pterosaur belonging to the suborder Pterodactyloidea. Its holotype specimen was discovered in China, and dated back to the Early Cretaceous period (Aptian stage). Further analysis conclude that it was a genus of dsungaripterid pterosaur. [1]

Contents

Discovery and naming

In the early 21st century, Chinese paleontologist Ji Shuan found a jaw of a pterosaur near the village of Xinzhao, which is 40 kilometers (25 mi) north of Otog Qi, Inner Mongolia. The find was reported in the scientific literature in 2017. [2]

In 2020, the type and only species Ordosipterus planignathus was named and described by Ji. The generic name combines a reference to the Ordos basin with a Latinized Greek pteron (meaning "wing"). The specific name is a combination of the Latin planus (meaning "flat"), and the ancient Greek gnathos (meaning "jaw"). [1]

The holotype, IG V13-011, has been found in a layer of sandstone, belonging to the lower Luohandong Formation, and may be dated back to the Aptian stage of the Early Cretaceous. The holotype consists only of a set of deformed paired lower jaws forming the mandible. [1]

Description

Size

The left dentarium of Ordosipterus has been stated to be around 77 millimeters (3.0 in) long, while the right dentarium is only measured to be 45 millimeters (1.8 in). It is very difficult to determine a size estimate for this pterosaur, but the holotype cannot have been from a large individual, judging by its size. Ji stated that the closely related Dsungaripterus was clearly much larger than Ordosipterus. [1]

Distinguishing traits

Ji identified some distinguishing traits that are unique in the Dsungaripteridae. This includes the dentarium of the lower jaw being as wide as the symphysis, and the middle part of the symphysis showing a weak ridge on the bottom. The top of the dentarium also forms a shelf bounded by a clear lateral ridge, which is parallel to the curved exterior. Along the jaw edge of the dentarium, there are low tooth sockets that are widely spaced, the space increasing to the rear. The distance between two adjacent tooth sockets varied from one and a half to three times their diameter. [1]

Skeleton

The dentarium bears at least eight teeth, five of which along the symphysis in a straight line, the rear three in a slightly inward curving row. Most of the tooth sockets are elevated, but much lower than in other dsungaripterids such as Dsungaripterus, and are found to be oval, with the long axis directed along the jaw, and the tooth sockets somewhat bulge upwards, though not extremely. Only the sixth left tooth is preserved in the fossil, and it appears to be short and blunt in comparison to other dsungaripterids. The middle four of the left teeth sockets are larger than the rear two. More precisely, the gap increases to the rear, ranging from 1.54 to 3.13 times the diameter of the anterior tooth. [1]

With a length of 33 millimeters (1.3 in), the symphisis forms a broad scoop-shaped plate with strongly curved side edges. At the back of the symphysis a short groove forms a notch with a V-shaped cross section. The side gradually merges into the bottom. The ridge on the bottom of the symphysis ends in front of the trailing edge. The branches of the dentaria are 6.5 millimeters (0.26 in) low in side view; their top edge and bottom edge are parallel. The dentarium bends slightly upwards from the sixth tooth. [1]

Classification

Ordosipterus was placed in the Dsungaripteridae, although not on the basis of an exact cladistic analysis. The exact place in the evolutionary tree is therefore uncertain, but this genus was thus placed as a dsungaripterid due to the typical swollen tooth sockets seen in many members of that group. [1]

Paleobiology

Many dsungaripterids have often been seen as durophagous species that cracked shellfish with their convex teeth. Ordosipterus shows a moderate bulge in its teeth, but not the extreme outgrowth that would have been useful for cracking. The broad lower jaws suggest a different way of eating, though Ji does not consider this issue. [1]

Related Research Articles

<i>Dsungaripterus</i> Genus of dsungaripterid pterosaur from the Early Cretaceous

Dsungaripterus is a genus of dsungaripterid pterosaur which lived during the Early Cretaceous in what is now China and possibly South Korea. Its first fossil was found in the Tugulu Group of the Junggar Basin.

<i>Noripterus</i> Genus of dsungaripterid pterosaur from the Early Cretaceous

Noripterus is a genus of dsungaripterid pterodactyloid pterosaur from Lower Cretaceous-age Lianmuqin Formation in the Junggar Basin of Xinjiang, China. It was first named by Yang Zhongjian in 1973. Additional fossil remains have been recovered from Tsagaantsav Svita, Mongolia.

<i>Feilongus</i> Genus of ctenochasmatid pterosaur from the Early Cretaceous

Feilongus is an extinct genus of ctenochasmatid pterodactyloid pterosaur from the Barremian–Aptian-age Lower Cretaceous Yixian Formation of Beipiao, Liaoning, China.

<i>Domeykodactylus</i> Genus of dsungaripterid pterosaur from the Early Cretaceous

Domeykodactylus is an extinct genus of dsungaripterid pterosaur from the Early Cretaceous (Berriasian-Albian)-age Santa Ana Formation at Quebrada de la Carreta in Antofagasta, Chile.

Lonchognathosaurus is a genus of dsungaripterid pterodactyloid pterosaur from the Aptian-Albian-age Lower Cretaceous Lianmuqin Formation of Xinjiang, China.

<i>Nurhachius</i> Genus of istiodactylid pterosaur from the Early Cretaceous

Nurhachius is a genus of istiodactylid pterodactyloid pterosaur from the Barremian to Aptian-age Lower Cretaceous Jiufotang Formation of Chaoyang, Liaoning, China. Its fossil remains date back about 120 million years ago.

<i>Liaoningopterus</i> Genus of anhanguerid pterosaur from the Early Cretaceous

Liaoningopterus, sometimes misspelled as "Liaoningopteryx", was a genus of anhanguerid pterodactyloid pterosaur from the Barremian-Aptian-age Lower Cretaceous Jiufotang Formation of Chaoyang, Liaoning, China.

<i>Ningchengopterus</i> Genus of pterodactyloid pterosaur from the Early Cretaceous

Ningchengopterus is a genus of pterodactyloid pterosaur from the Early Cretaceous period. Its fossil remains were found in the Yixian Formation of what is now China.

<i>Gladocephaloideus</i> Genus of ctenochasmatid pterosaur from the Early Cretaceous

Gladocephaloideus is a genus of ctenochasmatid ctenochasmatoid pterosaur from the Early Cretaceous period of what is now western Liaoning, China.

Pterofiltrus is a genus of ctenochasmatid pterosaur from the Early Cretaceous of western Liaoning, China.

<i>Guidraco</i> Genus of anhanguerid pterosaur from the Early Cretaceous period

Guidraco is an extinct genus of toothed pterodactyloid pterosaur known from the Early Cretaceous of Liaoning Province, northeast China. According to many recent studies, Guidraco is a member of the group Anhanguerinae, a subfamily belonging to the larger group Anhangueridae.

<i>Moganopterus</i> Genus of ctenochasmatid pterosaur from the Early Cretaceous

Moganopterus is an extinct genus of ctenochasmatid pterosaur from the Early Cretaceous of western Liaoning Province, China.

<i>Europejara</i> Genus of tapejarid pterosaur

Europejara is a genus of tapejarid pterosaur from the Early Cretaceous period of Spain. The type and only species known is Europejara olcadesorum.

<i>Cimoliopterus</i> Genus of pterosaur from the Cretaceous period

Cimoliopterus is a genus of pterosaur that lived during the Late Cretaceous in what is now England and the United States. The first known specimen, consisting of the front part of a snout including part of a crest, was discovered in the Grey Chalk Subgroup of Kent, England, and described as the new species Pterodactylus cuvieri in 1851. The specific name cuvieri honours the palaeontologist George Cuvier, whereas the genus Pterodactylus was then used for many pterosaur species that are not thought to be closely related today. It was among the first pterosaurs to be depicted as sculptures, in Crystal Palace Park in the 1850s. The species was subsequently assigned to various other genera, including Ornithocheirus and Anhanguera. In 2013, the species was moved to a new genus, as Cimoliopterus cuvieri; the generic name Cimoliopterus is derived from the Greek words for "chalk" and "wing". Other specimens and species have also been assigned to or synonymised with the species with various levels of certainty. In 2015, a snout discovered in the Britton Formation of Texas, US, was named as a new species in the genus, C. dunni; the specific name honours its collector, Brent Dunn.

<i>Banguela</i> Genus of azhdarchoid pterosaur from the Early Cretaceous

Banguela is a genus of azhdarchoid pterosaur from the Early Cretaceous period of what is now Brazil. Only one species is known, Banguela oberlii.

<i>Ikrandraco</i> Genus of lonchodraconid pterosaur from the Early Cretaceous

Ikrandraco is a genus of lonchodraconid pterodactyloid pterosaur known from the Lower Cretaceous Jiufotang Formation of northeastern China, and the Cambridge Greensand of England. It is notable for its unusual skull, which features a crest on the lower jaw.

<i>Iberodactylus</i> Genus of hamipterid pterosaur from the Early Cretaceous

Iberodactylus is a genus of pterodactyloid pterosaurs belonging to the clade Anhangueria, that during the Early Cretaceous lived in the area of present Spain. The type species is Iberodactylus andreui.

<i>Ferrodraco</i> Genus of anhanguerid pterosaur from the Late Cretaceous

Ferrodraco is an extinct genus of anhanguerid pterosaur known from the Late Cretaceous Winton Formation of Queensland, Australia, containing the single species F. lentoni. The species was named after the former mayor of Winton, Graham Thomas ‘Butch’ Lenton. It is the most complete pterosaur fossil from Australia, being known from the holotype specimen AODF 876, consisting primarily of the anterior portion of the skull and dentary, cervical vertebral centra and a partial wing. Its wingspan was estimated to be about 4 meters (13 ft). Ferrodraco was found to have been within the subfamily Ornithocheirinae, as sister taxon to Mythunga. A recent study also recovered Ferrodraco as sister taxon to Mythunga, but both placed within the family Anhangueridae, more specifically within the subfamily Tropeognathinae.

Otogopterus is a genus of pterosaur in the family Ctenochasmatidae, known from Early Cretaceous rocks in the Ordos region of Inner Mongolia, China. It contains one species, O. haoae, named in 2020 by Ji Shu'an and Zhang Lifu. The generic name Otogopterus refers to the Otog Banner locality, where it was discovered, while the specific name haoae honours palaeontologist Hao Yinchun. O. haoae is known from a partial lower jaw, which is long and straight, and bears a ridge on each side that divides the outer surface of the jaw. After Ordosipterus, Otogopterus is the second pterosaur known from the Ordos region.

Pachagnathus is an extinct genus of non-pterodactyloid pterosaur from the late Norian–early Rhaetian-aged Quebrada del Barro Formation of Argentina. It lived in the Late Triassic period, and is one of the only known definitive Triassic pterosaurs from the southern hemisphere. It is also one of the few known continental Triassic pterosaurs, indicating that the absence of early pterosaurs in both the southern hemisphere and terrestrial environments is likely a sampling bias, and not a true absence.

References

  1. 1 2 3 4 5 6 7 8 9 Shu-an Ji (2020). "First record of Early Cretaceous pterosaur from the Ordos Region, Inner Mongolia, China". China Geology. 3 (1): 1–7. doi: 10.31035/cg2020007 .
  2. Ji SA, Lu LW, Zhang LF, Yuan CX, Jiang S, Chen XY, Hou YD, 2017, "Recent progress in the study of the Early Cretaceous dinosaur fauna from the Ordos region, Inner Mongolia". Geology in China, 44 (1): 196–197